Otsing: thermal pad

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details:Colour: GreyDimensions: 15x15x1,5mmThermal conductivity: 5 W/mkmaximum bridgeable gap: 1,5 mmelectrically non-conductive Extent of delivery: 1x Thermal pad Ultra 5W/mk 15x15x1,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal padsThis product has been reviewed for you:Freeocen

These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is slightly sticky and is equipped with a protective foil when shipped. This foil must be removed before installation. Now the slight adhesive properties of the pad come into play and prevent slipping of the pad on the cooler or cooled element. Of course these pads can also be cut to the desired size. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical details:Colour: GreyDimensions: 30x30x1,5mmThermal conductivity: 5 W/mkmaximum bridgeable gap: 1,5 mmelectrically non-conductive Extent of delivery: 1x Thermal pad Ultra 5W/mk 30x30x1,5mm (1 piece) Please note: This thermal pad can be compressed to half of its original height! Data sheet to the thermal padsThis product has been reviewed for you:Freeocen

These self-adhesive thermal pads are very useful to compensate height differences and other irregularities on coolers and surfaces that are to be cooled. Due to the very elastic adaptability and the low hardness of this pad only little contact pressure is needed to allow perfect adaptation to the surfaces to ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible irregularities. The self-adhesive surface of these pads allow easy installation and prevents the pad from shifting during installation of the cooler. These pads were specially produced for RAM cooling but can also be cut to any desired size. Technical data: Dimensions: 120x20x0,5mm Heat conductivity: 1,5 W/mK Maximum bridgeable gap: 0,5mm Electrically non-conductive Extent of delivery: 1x Self-adhesive thermal pad 0,5mm (120x20mm) for ramplex, Mips and Koolance Note: The thermal pads can be compressed to up to half of their height.>

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 0,5 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mK 0.5mm (120x20mm) for ramplex, innovatek, Mips, Koolance Data sheet to the thermal pads This product has been reviewed for you (by):Script-BaseFreeocen

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 1 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mK 1mm (120x20mm) for ramplex, innovatek, Mips, Koolance Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

All new: Phobya's improved thermal pads with 7W/mK are able to match even high-end thermal compounds! These "XT" thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements. The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures. The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc. The surface of the pad is equipped with a protective foil which needs to be removed before use. The pads can be used on VRAM modules on graphics cards as well as on the VRM modules on a Mainboard or almost any other application where a high-performance thermal interface is desired. Even elements with large surfaces such as North- or Southbridge on a Mainboard are no problem for this thermal pad as it has great thermal conductivity. As basic equipment and spare parts these thermal pads should be a part of any cooling enthusiast's equipment! Technical specifications: Colour: White Dimensions: 120x20x0,5mm Thermal conductivity: 7 W/mk maximum bridgeable gap: 1,5 mm electrically non-conductive Extent of delivery: 1x Phobya thermal pad XT 7W/mK 1.5mm (120x20mm) for ramplex, innovatek, Mips, Koolance Data sheet to the thermal pads This product has been reviewed for you (by): Script-Base Freeocen

This special pad prevents damages and chipping or shorts and fits on all Chips without a protective frame with an open Core. The special feature of this pad is that it additionally features great thermal conductivity unlike other protective pads. Advantages: Open Cores are protected Mounting of coolers/ waterblocks is made easier and safer Electrical non-conductivity prevents shorts Thermal conductivity optimizes cooling of the Chip Technical specifications: Thickness: 1mm Outer dimensions: 35x35mm Inner cut-out: 15x15mm Please not that the protective pads installed on Mainboards may have different thicknesses. If the thickness may deviate by more than 0,5mm it may result in damages to the hardware during installation.

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):15x15x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 15x15x0,5mm

Alphacool’s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.This is especially interesting for systems such as Alphacool’s MCX system to allow mounting of heatsinks for graphics cards or Mainboards. But long-term testing shows that these pads are capable of much more than just holding small heatsinks! A holding power of at least 16N/25mm means an adhesive force greater than with some duct tapes! This allows mounting even of heavy coolers and the capability to deal with shocks from transport or twisting/ permanent pressure. But the engineers at Alphacool also paid attention to the thermal conductivity aspect. Different from the first adhesive pads on the market, which were rather insulation than thermal conductor, these pads transfer the heat with a thermal conductivity of up to 1W/mK The pads are covered with a protective foil on both sides when shipped. When this foil is pulled off, the white pad becomes visible. The pad feels very similar to rubber, and has the same advantages: It adapts to the surfaces easily, hence allowing the best possible heat transfer. Multiple pre-cut dimensions make cutting almost obsolete, but should it be needed to adjust the size of a pad, simply use scissors or a knife! Technical specifications:Material: PolymersColour: WhiteDimensions (L x W x H):30x30x0,5mmThermal conductivity: Up to 1W/mkAdhesive strength: min: 16N/25mm electrically non-conductiveconforms with ROHS Extent of delivery:1x Alphacool double-sided thermal adhesive pad 30x30x0,5mm

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 1.5mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 3mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool's new thermal pads with 3W / mk The inevitable height differences and uneven spots on coolers and cooled elements as well as the smallest grooves may be balanced due to the very elastic adaptability and the low hardness of the pads. The protective film, which is attached to the surface of the pads must be removed before use!The pads can also be cut to the desired sizewith a pair of scissors or a sharp knife. Application:Graphics card Ram coolerVoltage transformer on the mainboardNorth and / or South Bridge As basic equipment and spare parts these thermal pads have to be a part of any enthusiast's equipment! Technical details:Color: grayDimensions (L x W x H): 15 x 15 x 2mmThermal conductivity: 3W / mkelectrically non-conductive Scope of delivery:24x Alphacool thermal pad for NexXxoS GPX

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool's ultimate solution for cooling your computer with a layer of ice. Not a layer of ice in the traditional sense made of frozen water, but a layer that will freeze any chip. The properties of the new thermal pads speak for themselves.With up to 17 W/mk, the pads outperform all previous thermal pads and pastes! All hardware components can now be installed easily and cleanly using thermal pads!The "Alphacool ice layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! The area of application is just as versatile, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever the circuit board meets the heat sink, the Alphacool ice layer is a good choice.The pads are available in different power levels, 11, 14 and 17W/mk, each available in 0.5mm, 1mm and 1.5mm thickness to perfectly compensate for height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers). These can be easily separated with scissors to individually adjust the right size for each component. Technical dataDimensions (L x W x H)100 x 100 x 1,5mmThermal conductivity17W/mKThickness1,5mmFlame retardantV-0 (UL94)Useful temperature-40 ~ +150 °CHardness72 (Shore OO)Specific gravity3.2Breakdown voltage10 kV/mmElongation40 %Tensile strength0.5 MPaVolume resistivity1.0x10^11 Ohm-mFasteningslightly adhesiveColorgrey

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The "Alphacool Eisschicht" offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

Alphacool's answer to the often unsolvable problem: "The cooler cannot be screwed on!" With the double-sided thermal adhesive pad from Alphacool, you can mount your cooler in the desired location regardless of hole spacing, mounting brackets or other options provided. This is particularly interesting, for example, with the in-house MCX system for mounting mini coolers for graphics cards or motherboards. But long-term tests show that you can attach much more than just mini coolers! At least 16N / 25mm means an adhesive force that is better than some duct tape! This means that even heavier coolers can be hung up and even impacts during transport or twisting / constant pressure are no problem. The Alphacool thermal adhesive pad also does not lose sight of the cooling performance. While the first thermal adhesive pads on the market behaved more like insulation, these pads even transfer heat at up to 1W/mK. The pads are covered with a protective film on both sides when they are delivered. If you remove this, you can see the bright white pad, which feels almost like rubber and behaves in almost the same way. It adapts very well to the surface. Various pre-made dimensions make cutting almost unnecessary, but if it should ever be necessary to adjust the size, a pair of scissors or a knife is sufficient. Technical data Material: Polymers Color white Dimensions (LxWxH): 26 x 30 x 0.5 mm Thermal conductivity: up to 1W/mk Adhesive strength: min: 16N/25mm electrically non-conductive ROHS compliant scope of delivery 1x Alphacool thermal adhesive pad double-sided 26x30x0.5 mm

The Eisschicht from Alphacool can, like other thermal pads, compensate for the irregularities of heat sinks and the elements to be cooled. But it has a great feature: The Eisschicht consists of thermal paste with an embedded mesh! This ensures that the performance of these pads is much more efficient than normal thermal pads, regardless of the low W/mK value. In addition, a better distribution and filling between the surfaces is achieved. This also results in better air displacement. Due to their soft consistency, there is also no pressure on components or solder joints. Nvidia also uses this kind of pads for the Founders Edition. The Eisschicht can be easily cut to the desired size and attached to heat sinks without slipping.As a basic component or spare part, thermal pads belong in every well-organized computer tinkering corner! Technical dataDimensions (L x W x H)100 x 100 x 0,5mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 3mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight28 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 2mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight19 gColorGrey

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 120 x 20 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,4 g/cc Thermal Conductivity ASTM D5470 11.0 W/mK Hardness ASTM 2240 72 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 7,2 MHz Dielectric Breakdown Voltage ASTM D149 14 kV/mm Flame Rating UL 94 V-0 Weight 20 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 11W/mk 2x 120x20x1mm

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 1,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Thermal Hero GAMMA Phase Changer – Phase Change Thermal Interface Material (TIM) Discover a new era of cooling with the Thermal Hero GAMMA Phase Changer. This liquid thermal pad combines high thermal conductivity with excellent cooling performance and is perfectly suited for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. High thermal conductivity through phase change More efficient heat transfer Self-adapts to contact surface – optimal fit Clean application thanks to fast, adhesive layer on one side Consistent performance under varying loads User-friendly and pressure-activated Low material thickness / slim profile Includes cleaning cloth for easy surface preparation Cuttable, ideal for overclocking GAMMA is characterized by its unique ability to change from solid to semi-solid at operating temperatures above 44 °C. This phase change completely fills microscopic gaps and surface irregularities, ensuring optimal heat transfer and reliable cooling—especially under high thermal loads. Applications: CPUs and GPUs Heatsinks in PCs, laptops, and graphics cards Electronic components with high heat output Overclocking scenarios that require maximum cooling performance Application instructions: Use the adhesive side and clean the surface (with the included cleaning cloth) Cut the pad and apply it precisely Activate with pressure to ensure even distribution

Thermal Hero GAMMA Phase Changer – Phase Change Thermal Interface Material (TIM) Experience a new era of cooling with the Thermal Hero GAMMA Phase Changer. This phase change thermal pad combines high thermal conductivity with excellent cooling performance, making it perfect for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. High thermal conductivity through phase change More efficient heat transfer Self-adapts to the contact surface – perfect fit Clean application thanks to fast, adhesive coating on one side Consistent performance under variable load User-friendly and pressure-activated Thin material / low profile Includes cleaning wipe for easy surface preparation Cuttable, ideal for overclocking GAMMA is characterized by its unique ability to change from solid to semi-solid at operating temperatures above 44 °C. This phase change completely fills microscopic gaps and surface irregularities, ensuring optimal heat transfer and reliable cooling—especially under high thermal demands. Applications: CPUs and GPUs Heatsinks in PCs, laptops, and graphics cards Electronic components with high heat output Overclocking scenarios where maximum cooling is required Instructions for use: Use the adhesive side and prepare the surface cleanly (with the included cleaning wipe) Cut the pad to size and apply precisely Apply pressure to ensure even distribution

THERMAL HERO NEO 100 x 100 x 0.5 mm Thermal Hero NEO 100 x 100 x 0.5 mm – High thermal conductivity thermal pad for BASIC APPLICATIONS (CPU, GPU, laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of ease of use and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g. Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads adhere quickly and are easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated, and can be cut to size, making them flexible for different components. Wide range of thermal conductivities, suitable for various applications Shore hardness 20–40 (medium soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 3.0 mm Thermal Hero NEO 100 x 100 x 3.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate thermal requirements. Thanks to an adhesive layer on one side, the pads adhere quickly and are easy to install. Includes cleaning cloth, pressure-activated and cuttable, allowing you to flexibly adapt them to different components. Wide range of thermal conductivities, suitable for different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 2.0 mm Thermal Hero NEO 100 x 100 x 2.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for basic applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate heat requirements. The pads have an adhesive layer on one side for quick adhesion and easy installation. They come with a cleaning cloth, are pressure-activated and can be cut to size, allowing you to flexibly adapt them to different components. Wide range of thermal conductivities, suitable for various applications Shore hardness 20–40 (medium soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 1.5 mm Thermal Hero NEO 100 x 100 x 1.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent strength and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for basic applications such as CPUs, GPUs, laptops, and gaming consoles (e.g. Xbox, PS3/4/5), as well as other electronics with moderate cooling needs. The pads come with an adhesive layer on one side for quick stick-on and easy installation. Includes cleaning cloth, pressure-activatable, and cuttable to flexibly adapt to different components. Wide range of thermal conductivities available for different applications Shore hardness 20–40 (medium-soft), easily cut to size with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 1.0 mm Thermal Hero NEO 100 x 100 x 1.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an outstanding combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate thermal demands. The pads are quickly adhesive and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated, and can be cut to size, allowing you to adapt them flexibly to various components. Wide range of thermal conductivities, suitable for different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 0.5 mm Thermal Hero NEO 120 x 20 x 0.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate heat requirements. The pads feature an adhesive layer on one side for quick stick-on installation and are easy to apply. Includes cleaning cloth, pressure-activatable, and can be cut to size, making them flexible and adaptable for various components. Wide range of thermal conductivities available, suitable for different applications Shore hardness 20–40 (medium soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 1.5 mm THERMAL HERO NEO 120 x 20 x 1.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent hardness and pressure distribution Long-term stability Electrical insulation User friendliness Reliable performance THERMAL HERO NEO thermal pads provide an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads are quickly adhesive and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated, and cuttable, allowing you to flexibly adapt them to different components. Wide selection of thermal conductivities to suit different applications Shore hardness 20–40 (medium soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 1.0 mm Thermal Hero NEO 120 x 20 x 1.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of ease of use and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and game consoles (e.g. Xbox, PS3/4/5), as well as other electronics with moderate heat demands. The pads are quick to adhere and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth; pressure-activated and can be cut to size, allowing flexible adaptation to various components. Wide range of thermal conductivities to suit different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 2.0 mm Thermal Hero NEO 120 x 20 x 2.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an outstanding combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate thermal requirements. The pads have an adhesive layer on one side for quick attachment and easy installation. Includes cleaning cloth, pressure-activated, and can be cut to size so you can flexibly adapt them to various components. Wide range of thermal conductivities to suit different applications Shore hardness 20–40 (medium-soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements