ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: gray Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:
ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: white Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:
PCTG is an advanced 3D printing filament, belonging to the same polyester family as the popular PET-G. Compared to PET-G, PCTG has higher impact strength, heat resistance (up to 76°C) and transparency. It offers an interesting alternative to PET-G. Like PET-G, PCTG does not require a heated print chamber, making it an excellent choice if you plan to print on open hobby printers.PCTG is characterized by high flexibility, strong adhesion between layers, high viscosity and minimal shrinkage. Its characteristics enable easy and efficient printing, even for those without much 3D printing experience. 3D printing using PCTG is widely used in various sectors. In industry, it is an ideal choice for creating parts, small batch production and usable models, confirming the versatility of this material. The automotive sector also benefits from the advantages of PCTG, using it to print accessories, components in the engine compartment, vehicle component housings, as well as components such as air intakes and fluid inlets (chemical resistance). In the world of sport, PCTG proves its value in the production of various types of accessories, protectors, etc. The properties of this material guarantee not only the high durability of the finished prints, but also their aesthetics and functionality. APPLICATION- spare parts,- small batch production,- utility models,- engine compartment accessories and components,- vehicle component housings,- air intakes,- service fluid inlets,- sports accessories, protectors, etc. HOW TO PRINTRecommended printing temperature 240-270°C.Recommended table temperature: 60-80°C.Heated table required TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000g Print temperature 240-270 °CBed temperature 60-80 °C PHYSICAL PARAMETERS Density 1,24 g/cm3Odor OdorlessTensile strength (to break) 46 MPaNotched Izod impact strength 92 kJ/m2Vicat softening point 76/64 °C (0,455 MPa/1,82 Mpa) Printable model for refill spool sides you can download here: Recommended printing parameters:
PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print Applications: prototyping, large-format printing, lampshades/enclosures. PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Recommended printing parameters extrusion temperature 220-250°C bed temperature: 60-80°C fan: 0-60% Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: black Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.29 g/cm3 Odor: odourless Heat distortion temperature: 78°C (ISO 306) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 6 % Tensile strength (to break): 20 MPa
PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60% Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: transparent blueDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa
PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless.Applications: prototyping, large-format printing, lampshades/enclosures.PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parametersextrusion temperature 220-250°Cbed temperature: 60-80°Cfan: 0-60%PRODUCT PARAMETERSColor: grayDiameter: 1.75 mmWeight: 3000 g (vacuum packed)Density: 1.29 g/cm3Odor: odourlessHeat distortion temperature: 78°C (ISO 306)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02Tensile elongation: 6 %Tensile strength (to break): 20 MPa
PLA-Silk is a durable and easy to use filament characterized by intense color and exceptional gloss. Prints made with the PLA-Silk product line filament have an eye-catching luminous surface. Application decorations elements of interior design, luminous sculptures, toys, figurines gadgets (e.g. pendants, key rings) PLA Silk is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. Printable model for refill spool sides you can download here: PRODUCT PARAMETERS Color: silk silver Diameter: 1.75 mm Weight: 1000 g (vacuum packed) (refill packing (without plastic spool) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printng. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: whiteDiameter: 1.75 mmWeight: 3 kg (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: chocolate brown Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: light brown Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
The PLA Starter filament by Rosa3D was designed for beginner users of 3D printers. The seamless printing with our PLA Starter will let you print more and more complicated and challenging projects. PLA Starter is characterized by low moulding shrinkage and a lack of unpleasant smell. PLA Starter printouts are also characterised by very strong adhesion of layers and high quality reproduction of details. The filament is made of biodegradable biopolimer. It is manufactured from food-grade elements. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product. APPLICATION- decorations (e.g. interior design elements, such as lamp shades or vases)- toys (e.g. figurines)- gadgets (e.g. key rings, pendants)- prototypes HOW TO PRINTRecommended printing temperature 190-225°CRecommended table temperature: 40-60°CRecommended cooling: 70-100% TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000gPrint temperature 190-225 °CBed temperature 40-60 °C PHYSICAL PARAMETERSDensity 1.24 g/cm3Odor OdorlessTensile elongation 6 %Tensile strength (to break) 53 MPaTensile modulus 3500 MPaThermal deformation temperature 55 °C Printable model for refill spool sides you can download here:
ROSA-Flex 85A is a technical TPU filament. It can be used wherever elements resistant to chemical reagents and mechanical damage are needed. Printouts made of this material can be squeezed and stretched many times without damaging the original shape. The material is characterized by both excellent interlayer adhesion and adhesion to many work surfaces. Application examples: gaskets, bumpers, anti-vibration dampers/feet smartphone cases and devices housings components for drones components for RC cars ROSA-flex 85A is a thermoplastic polyurethane from ROSA3D. The material is designed for technical applications. Thanks to its flexibility and outstanding interlayer adhesion, it is suitable for all applications where mechanical resistance and tensile strength are required. It can be repeatedly squeezed and stretched without changing it’s original shape. The filament is characterized by exceptional chemical resistance. It is resistant to greases, oils and many solvents. The complete chemical resistance table can be found in ‘files to download’ section. The filament is intended for intermediate users who already have experience with 3D printing. Recommended printing parameters: extrusion temperature: 215-250 ° C bed temperature: 30-60 ° C print cooling: 0-100% (depends on the geometry of the model) printing speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed) compatible bed surfaces: glass, smooth PEI, textured PEI. Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object. PRODUCT PARAMETERS: Diameter: 1.75 mm Net weight: 500 g Spool weight: 245 g ROSA-Flex 85A PHYSICAL PARAMETERS: Density: 1.18 g / cm3 Odor: odorless Elongation at break: 520%
Tootja: Spectrum Group Tootegrupp: Filament Filament type: PLA Special Available filament värvi: Glow in the dark Filament diameter: 1.75 mm Tolerance of the diameter: 0.05 mm Recommended operating temperature - head: 215 °C, 185 Vacuum pump protection against moisture: Ei Desiccant: Ei Filament wound around the spool: Jah Netokaal: 500 g Brutokaal: 800 g Lisainfo: spectrumfilaments.com [LINK]
Creality CR-PETG Filament (Blue) Creality's PETG filament combines the advantages of PLA and ABS filaments. It is environmentally friendly and not prone to distortion, while enabling smooth and precise printing. It also stands out for its high strength and moisture resistance, and its surface is eye-catching with a beautiful sheen. What's more, CR-PETG filament is compatible with most FDM Creality printers. High quality manufacturing Thanks to the use of environmentally friendly PETG plastic, the filament is very durable and does not emit unpleasant odors. It also features a uniform diameter and resistance to moisture, distortion and cracking. In addition, its tensile strength reaches 49 MPa. An additional advantage of the filament is its beautiful, glossy surface - it is perfect for printing figurines and decorations, for example! Smooth printing The filament allows smooth, fast and precise printing - without wrinkles and bubbles on the project. At the same time, it guarantees perfect flow and minimizes the risk of clogging the printer nozzle. So you can print your models without any problems and save precious time! ManufacturerCrealityNameCR-PETG 3D printer filamentModel3301030032ColorBluePrinting temperatureFrom 230°C to 250°CTensile strength49 MPaFilament diameter1.75 mmWeight1 kg
