Otsing: 12 pro max

Choetech TC0006 1x USB-A, 1x USB-C 30W PD 3.0 car charger (black).Choetech TC0006 is a versatile car charger that instantly replenishes the power of your devices when you're on the road. With two ports - USB-A and USB-C - and a high power output of 30W, it is capable of quickly and efficiently powering almost any device. Supported technologies (PD 3.0 and QC 3.0), ensure that your devices will renew energy in the shortest possible time. And most importantly, with its versatile 12-24V DC input, the charger integrates perfectly into virtually any vehicle.Speed and compatibilityChoetech TC0006 is a versatile car charger. With a USB-A output supporting a variety of modes from 4.5V/5A to 12V/2.5A and a USB-C port offering 5V/2.4A to 20V/1.5A, it allows you to safely charge a variety of devices, which is especially useful when traveling with family or friends when everyone is using different equipment. Now you can quickly charge your laptop or phone and other mobile device at the same time without worrying about running out of power. With Choetech TC0006, your devices will always be ready to go!Manufacturer.ChoetechModelTC0006InputDC 12-24 VProtocolUSB-A QC3.0, Huaweii-FCP, Huawei SCP; USB-C PD3.0, QC3.0, Huawei FCPOutput (USB-A)4.5V/5A, 5V/4.5A, 9V/3A, 12V/2.5A Max.Output (Type-C)5V/2.4A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A Total output5V/4.8A

Power charger, Vention, FEPW0-EU, USB-C, 20W, GaN (white).Get fast charging for your devices. The Vention charger offers up to 20W of power and supports standards such as PD, QC and PPS, for example. It also stands out for its compact design and wide compatibility. It also uses GaN III technology, which ensures its efficient and safe operation.Fast chargingThe charger is equipped with a USB-C port and can charge devices with up to 20 watts of power. It also supports various fast charging standards, including PD, PPS, QC, FCP and AFC. This will save you time! Now you can charge your phone in no time - forget about the long wait. What's more, the charger offers intelligent Trickle Charging mode, which prevents overcharging the battery, protecting it from damage.Performance and safetyThanks to the use of GaN III technology, the charger enables efficient yet safe charging. It will also not overheat. The solution used also made it possible to reduce the size of the product to just 33 x 33 x 57.4 mm. As a result, you can always have it with you - its transportation will not cause you any problems! The charger has also been protected against overheating and other hazards, and its housing is made of flame-retardant PC plastic.Wide compatibilityWith the help of the charger you can easily charge most of your devices. The product is compatible with many equipment from well-known brands, for example, phones, tablets, wireless headphones, Bluetooth speakers and smartwatches. With Vention you will forget about limitations! ManufacturerVentionNameGaN ChargerModelFEPW0-EUColorWhiteAvailable ports1x USB-CMaximum power20 WInput100-240 V 50/60 Hz 500 mAOutput5 V - 3 A (15 W), 9 V - 2.22 A (19.98 W), 12 V - 1.67 A (20 W max)Compatible standardsPPS, PD 3.0, QC 3.0, FCP, AFC, Apple 2.4AMaterialPCFlame retardant ratingUL94-V0Dimensions57.4 x 33 x 33 mm

Magnetic car charger with cooling function Joyrooom ZS387The Joyroom ZS387 car charger is an innovative solution for drivers who appreciate fast and safe charging on the go. It offers up to 15 watts of power, a reliable magnetic holder and a cooling function that ensures optimal conditions for the charged smartphone - even on long journeys. The product works perfectly with iPhone 15/14/13/12 series and MagSafe case.Fast and safe chargingWith up to 15 watts of power, the ZS387 will allow you to charge your smartphone in no time. In addition, the built-in fan provides efficient cooling and heat dissipation, so you don't have to worry about your phone getting excessively hot!Powerful magnetsThe charger is equipped with 16 N55 neodymium magnets, which provide an extremely strong and stable hold on your smartphone. Thanks to two magnetic circles, your device will stay in place even during sudden movements or driving on uneven terrain. All this gives you the assurance that your phone will not fall out of the mount regardless of the conditions on the road!Double security of the mountThe double-locking system allows you to securely attach the charger to the car's grille. Automatic spring hooks and a locking mechanism with a latch ensure a secure yet simple installation of the accessory - don't worry that it will fall off during your trip.Refined in every detailThe sleek LED ring, glossy surface and metal frame make the charger look extremely modern and stylish. In addition, the accessory is very easy to use and allows you to rotate your phone 360°, so you can position it both vertically and horizontally to comfortably use navigation or play music. ManufacturerJoyroomModelZS387Input5 V - 2 A, 9 V - 2 A, 12 V - 2 AOutput power5 W / 7.5 W / 10 W / 15 W max.Input portUSB-CMaterialPC + ABS + aluminum alloyDimensionsApproximately 66 x 66 x 100 mmCompatibilitySmartphones with a diagonal of 4.7" to 7"

Mcdodo HP-7500 wired headphones, USB-C (white)The HP-7500 headphones are an ideal choice for lovers of high-quality sound. They provide lossless sound that will let you experience your favorite songs anew. Their ergonomic design guarantees maximum wearing comfort for a long time, and the remote control will make it easy to manage the most important functions.Let yourself be amazed by the sound qualityExperience sound at its best and enjoy every note like never before! Equipped with advanced 14mm drivers, they deliver incredibly clear and dynamic sound, so you can hear every detail of your favorite music or movie, distinguished by rich bass and precise treble. What's more, they feature a digital audio decoding DAC chip that supports high bit-rate audio formats such as 24Bit / 96kHz and high-resolution audio standards.Ergonomic design for your comfortThe Mcdodo headphones are designed to fit perfectly in your ears. As a result, they provide a comfortable wearing experience, no matter how long you use them - you don't have to worry about pain or ear fatigue! They weigh just 12 grams, making them extremely lightweight and virtually imperceptible when worn.Smart control in your handsNow you have all the most important functions at your fingertips! The remote control integrated into the cable will allow you to conveniently change songs, control the player or manage incoming calls - all without having to reach for your phone. ManufacturerMcdodoModelHP-7500ColorWhiteMaterialPCCable length1,2 mConnectorUSB-CTransducersØ14 mmImpedance32 ΩWeight12 g

> 5-MP 1/2.7" CMOS image sensor, low luminance, and high definition image. > Outputs max. 5 MP (2960 × 1668) @20 fps, and supports 2688 × 1520 (2688 × 1520) @25/30 fps. > H.265 codec, high compression rate, ultra-low bit rate. > Built-in IR LED, and the max. illumination distance is 30 m. > ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments. > Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes. > Intelligent monitoring: Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human). > Abnormality detection: Motion detection, video tampering, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection. > Supports max. 256 G Micro SD card; built in MIC. > 12 VDC/PoE power supply. > IP67 protection. > SMD Plus

Power Bank Magnetic Mcdodo MC-5930 10000mAh, 30W (white).The Mcdodo MC-5930 magnetic powerbank is a perfect combination of modern design and high performance. With a capacity of as much as 10000mAh, it allows you to charge your devices in any situation, and its compact size makes it perfect for both home and travel. The product supports wired and wireless charging, and is compatible with many smartphone models. You don't have to take your phone out of the case to use it, either! You'll also find a 0.2-meter USB-C to USB-C cable included.Wireless and wired chargingThis powerbank offers both wireless charging with up to 15 watts and fast USB-C wired charging with up to 30 watts. This means you can charge your phone without the need for cables, and when needed, you can top up the battery in no time with a cable.Simultaneous charging and dischargingNow you can easily charge your phone even while charging the powerbank itself. This is an extremely convenient solution that ensures continuous use and minimizes the time you have to wait for your devices to fully charge.High capacityWith a capacity of 10000 mAh, the MC-5930 does not require too frequent charging. With its help, for example, you can charge an iPhone 13 mini about 2.5 times and an iPhone 14 up to 2 times, making it an ideal choice for long trips or busy days when you don't have access to traditional power sources.Strong magnets and precise fitThe powerbank is equipped with 28 strong magnetic cores that provide double the pulling power and a precise fit to your device. So you can be sure that wireless charging will be smooth and uninterrupted.Security at the highest levelThe Mcdodo MC-5930 keeps your devices safe with advanced protection against overheating, overvoltage, overloading, overcharging, short circuit and other hazards. In addition, the device is equipped with an NTC temperature sensor, which ensures fast charging with low heat.Practical functions and modern designA set of LED indicators informs about the battery level and the current charging mode - blue for wireless charging and orange for wired charging. In addition, the powerbank's casing is fingerprint-resistant, ensuring its aesthetic appearance for longer. There is also a small button for easy operation of the device. ManufacturerMcdodoModelMC-5930ColorWhiteCapacity10000 mAhRated capacity6000 mAhWireless charging output power5 W / 7.5 W / 10 W / 15 WTotal output current5 V - 3 AUSB-C input5 V- 3 A, 9 V - 2.2 A, 12 V - 1.6 AUSB-C output5 V - 3 A, 9 V - 3 A, 12 V - 2.5 A, 15 V - 2 A, 30 W max.MaterialPC + ABSDimensions99 x 67 x 21 mmWeight202 g

Powerbank Mcdodo MC-3911 Digital Display 30000mAh, 22.5W PD (black).The 30,000mAh powerbank is the ideal solution for users in need of a reliable power source. It offers support for a wide range of fast charging protocols, enabling fast and safe charging of a variety of devices. With up to 22.5W output power and 20W PD for iPhones, it provides four times faster charging compared to traditional powerbanks. In addition, the digital LED display and multi-level protection make it a reliable device ideal for long trips.Fast charging of 22.5 wattsThe powerbank provides support for fast charging technology with a power output of up to 22.5 watts, which allows you to replenish various devices extremely quickly. Thanks to the high power output, you can charge your smartphone, tablet, or other compatible devices in a short period of time. Support for such fast charging protocols as PD, QC, SCP, FCP, AFC, and VOOC enables fast and efficient charging. In addition, with 20W PD support for iPhone 8-14, you will renew your device's energy up to 60% in just 30 minutes.30,000 mAh capacityThe powerbank's capacity of as much as 30,000 mAh allows you to charge various smartphones multiple times without the need to connect to a power source. For example, the powerbank can charge an iPhone 14 about 5 times, and a Huawei P40 and Xiaomi 13 about 4.5 times. Combined with fast charging, the powerbank provides maximum convenience.Multi-level protectionThe device features an advanced protection system that ensures safety for both the powerbank itself and connected devices. Protection includes safeguards against overcharging, over-discharge, overheating, etc. In addition, NTC sensors monitor the temperature of the system in real time, allowing you to adjust the operating parameters depending on the conditions. Thus, you can be sure that devices connected to the powerbank will be charged without risk of damage. ManufacturerMcdodoModelMC-3911ColorblackDimensions153 x 67.63 x 40.62 mmWeight603 gMaterialABS, PCCapacity30,000 mAh / 3.7 V, 111 WhRated capacity17400 mAhInput voltageUSB-C: 5V/2.5A, 9V/2A, 12V/1.5A (18W max).Output voltageUSB-A1: 4.5 V/5 A, 5 V/4.5 A, 5 V/3 A, 9 V/2 A, 12 V/1.5 A (22.5W max); USB-A2: 4.5 V/5 A, 5 V/4.5 A, 5 V/3 A, 9 V/2 A, 12 V/1.5 A (22.5W max); USB-C: 5 V/3 A, 9 V/2.22 A, 12 V/1.67 A (max. 20 W)Maximum output voltage5V/3A, 15W (max).

IPC-HDBW5442E-ZE2712-S3-B 4MP IR Vari-focal Vandal-proof Dome WizMind Network Camera > 4-MP 1/1.8" CMOS image sensor, low luminance, and high definition image. > Outputs max. 4MP (2688×1520) @25/30 fps. > Built-in IR LED, and the max. illumination distance is 40 m. > ROI, SVC, SMART H.264+/H.265+, AI H.264/H.265, encoding after filter, flexible coding, applicable to various bandwidth and storage environments. > Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes. > With deep learning algorithm, it supports: video metadata, smart sound detection, IVS, face detection, smart object detection, and people counting, etc. > Alarm: 2 in, 1 out; audio: 1 in, 1 out; supports max. 1 TB Micro SD card, built-in MIC > 12 VDC/24 VAC/PoE power supply; ePoE. > IP67 and IK10 protection. > SMD 3.0 Focal Length: 2.7 mm–12 mm, Field of View: H: 115°–47°

Thermal Network Hybrid Bullet Camera > Vanadium oxide uncooled focal plane detector. > 4Megapixel progressive scan CMOS. > Offers various AI functions such as intrusion, target filtering, heat detection, smoking detection, and calling detection. > Built-in white light and speaker that produce light and sound alarms to deter intruders. > Built-in IR LED with a maximum illumination distance of 35 m. > Dual image fusion (visible and thermal images). > 12 VDC ± 20%/PoE power supply. > IP67 rated.

GlocalMe Unicord 4G/L Portable Wi-Fi Hotspot Cable.GlocalMe Unicord is an innovative device that combines the functionality of a portable Wi-Fi hotspot with fast device charging. Using CloudSIM technology, it offers seamless 4G/LTE internet access in over 150 countries without the need for a SIM card. It has a length of 1m and is easy to carry thanks to its light weight (only 39g). It is also equipped with a USB-C interface, and a USB-C to USB-A adapter is also included. At the same time, the cable supports several fast charging standards and offers up to 65 watts of power.Global Internet access with CloudSIM technologyGlocalMe Unicord supports numerous 4G/LTE bands, including FDD-LTE (B1/2/3/5/8/12/13/17/18/19/20/25/26/28) and TFF-LTE (B38/B41) without the need to purchase local SIM cards. The built-in CloudSIM technology automatically connects to the best available network, offering a fast and stable connection anywhere. It's perfect for when you're on the go - it will let you browse the web and connect with loved ones wherever you are without any hassle.Wi-Fi module and multitaskingThe GlocalMe Unicord's Wi-Fi module operates in the 2.4 GHz band and supports 802.11 b/g/n standards, ensuring robust data transfer speeds. In addition, the device allows two devices to be connected simultaneously, making it ideal for small groups or when traveling.Fast charging and high powerThe GlocalMe Unicord offers more than just internet access - it also provides fast and efficient charging. Supporting standards such as PD3.0, PD2.0, QC4.0 and BC, it enables fast charging with up to 65 watts of power. With the help of which you can easily charge your smartphone, laptop or other equipment, saving valuable time.Ideal for travelTransporting the device is very easy, thanks to its light weight of 39g and length of 1m. In addition, a USB-C to USB-A adapter is included, increasing compatibility with different types of devices such as powerbanks, laptops and tablets. Meanwhile, 4G/LTE network capability and CloudSIM technology are great perks for those who need a reliable network connection and full mobility anywhere in the world.IncludedWi-Fi cableUSB-C to USB-A adapter ManufacturerGlocalMeModelUnicord whiteColorWhiteCable length1 mWi-Fi module dimensions66 x 21 x 13.5 mmMaterialPlasticWeight39 gLED colorBlueCPUUNISOC8850FDD-LTEB1/2/3/5/8/12/13/17/18/19/20/25/26/28TFF-LTEB38/B41WCDMANoGSMNoWLAN2.4 GHz 802.11 b/g/nMax. number of Wi-Fi accesses2BTNoGPSNoInterfaceUSB-C to USB-CCharging powerUp to 65 wattsSupported fast charging standardsPD3.0, PD2.0, QC4.0, BCSIM cardNoResetButton in the holeOperating systemRTOS

Pentabrid capability: Each channel supports up to 5MP: HDCVI, AHD, TVI, CVBS and 6MP IP Video input, Auto-detect 16-channel BNC interface HDCVI/AHD/HD-TVI recording: 5MP, 4MP, 1080P@25/30 fps, 720P@50/60 fps, 720P@25/30 fps. Record: 5M-N (1 fps–10 fps); 4M-N/1080P (1 fps–15fps); 1080N/720P/960H/D1/CIF (1fps–25/30 fps) IP: 16+8 channels, each channel up to 6MP; Max 128Mbps Incoming Bandwidth AI Coding/H.265+/H.265/H.264+/H.264 video compression G.711A, G.711U, PCM audio compression, 2x SATA interfaces up to 32 TB total storage VGA/HDMI up to 3840×2160 output RJ-45 1GB, 2x USB ports, RS485 No front panel control, 1/1 Audio I/O, no Alarm I/O Full size 1U case, mouse included ONVIF 16.12, CGI Conformant, Coax audio, IoT & POS support Third-party IP camera support: Dahua, Arecont Vision, AXIS, Bosch, Brickcom, Canon, CP Plus, Dynacolor, Honeywell, Panasonic, Pelco, Samsung, Sanyo, Sony, Videotec, Vivotek, and more Up to 2 channels video stream ( analog channel ) Perimeter Protection Up to 16 channels video stream ( analog channel ) SMD Plus Up to 2 channels video stream (analog channel ) human face recognition IoT & POS functionalities Free IP monitoring software available

TV mount with screen tilt optionFunctionality: TV tilt option Easy installation Mounting kit included Fits TVs of various sizes Very close to the wall installation High durability: holds TV up to 35 kg Stable and safe mounting confirmed by tests Ecological packaging: plastic-free, FSC certified materials Long warranty period Tilt optionAfter mounting the TV, the wall mount can be tilted up to 12°. Such adjustment will allow you to adjust the image to your requirements, the visibility will be perfect.Quick and easy installationTogether with the Hama Motion TV mount, you receive a mounting kit, including dowels from the renowned Fischer brand, a spirit level and assembly instructions. This will allow you to efficiently mount the TV mount on the wall.CompatibilityThe TV mount is designed for devices with a screen diagonal of 32" to 65" (81 - 165 cm). It is compliant with the VESA standard from 100 x 100 to 400 x 400. The maximum load capacity of the mount is 35 kg.Safety of useThe Hama Motion TV mount is completely safe, as confirmed by demanding load, stability and functionality tests. The product has a 10-year warranty period. You can safely install it in your home.Mounting close to the wallThe slim profile of this TV mount allows you to mount the TV very close to the wall - at a distance of just 2.8 cm. This allows for a modern interior design, the TV almost blends into the wall.Environmentally friendly packagingOur packaging is 100% plastic-free, in this way we reduce the amount of plastic waste and facilitate recycling. The paper, cardboard and cardboard in our packaging come from sustainable forestry (FSC certificate), in this way we save wood resources.

Hohem iSteady M7 GimbalHohem iSteady M7 is an advanced gimbal created for demanding users who want the highest quality stabilization and functionality. Thanks to its design, support for a wide range of smartphones and innovative technologies, it will work perfectly in the hands of both amateurs and professionals.Impressive iSteady 9.0 stabilizationOne of the iSteady M7's greatest strengths is its 9.0 stabilization system, which ensures smooth and stable shots even during dynamic movements. It's ideal for recording in motion - from fast-paced action scenes to precise slow-motion shots. The stabilization works even at high speeds, making it easy for users to achieve professional results without extra effort.Innovative AI Tracker functionThe gimbal is equipped with a dedicated AI Tracker module, which enables intelligent real-time tracking of objects and people, regardless of the application being used. This feature is particularly useful when recording vlogs, live broadcasts or dynamic scenes, where precise frame tracking plays a key role.Full control with detachable touch screenThe iSteady M7 is also distinguished by an innovative detachable touchscreen, which allows convenient operation of the gimbal's functions. This allows the user to control the recording parameters in real time and adjust the settings according to their needs, greatly enhancing the user experience.Expanded versatility and performanceThe gimbal supports smartphones weighing up to 500g and supports foldable devices. The built-in 19.8 cm long boom allows you to capture more interesting shots and more easily create content from different perspectives. It is complemented by RGB and dual-color LED lights, which offer extensive lighting capabilities that are useful when working in difficult lighting conditions.Long-lasting operation and chargebackThe long-lasting battery provides up to 16 hours of operation, and the charge-back function allows you to charge connected devices such as a smartphone. This is ideal for those who want to remain fully mobile and independent during long recording sessions.Compact kit with extensive featuresThe Hohem iSteady M7 comes with a set of accessories in a sturdy case for easy storage and transportation. Among other things, the kit includes a tripod, charging cable and detachable touchscreen, allowing you to start working immediately after unpacking the product.IncludediSteady M7 x1Advanced Al Tracker with fill light x1Detachable remote control with touchscreen x1Tripod x1Carrying case x1USB type C charging cable x1USB type C to C charging cable x1Quick start guide x1Warranty card x1Safety guidelines x1 ManufacturerHohemModeliSteady M7 GimbalWeightGimbal: 629g(±5g), Tripod: 118.5gDimensionsUnfolded: 327*122.3*118.3mm, Folded: 335.7*57*159mmMaterialHigh-performance composite materialMaximum load500gSmartphone width58mm~90mmThickness of the smartphone6.9mm~12.5mmBattery Capacity18650li-ion, 7.2V/3200mAh/23.04WhOperation timeAbout 12 hours (balanced and stationary), About 8 hours (with Al tracking), 3 ~ 4 hours (with simultaneous Al tracking and fill light), *Data is from Hohem LaboratoryPower consumption1.8 watts (balanced and stationary)Charging time3 hoursControlled anglePan rotation: 360° at infinity, Roll rotation: +45°, Tilt (Tilt): -50°~275°Operating temperature-10°C~45°CMotor protectionThe gimbal will automatically shut down in case of malfunction to protect the motor. Remote controlBattery capacity3.8V/240mAh/0.912WhRemote control range≤ 10mVideo transmission≤ 7mTouch screen1.4 inches AI trackerWeight20gDimensions42.5*29.5*19.5mmPixels2 MPGesture recognition range0.5m~5mFollow range0.5m~7mIllumination40lux@0.5mLight power2WRGB360 lighting colorsCCT2700K, 3000K, 3500K, 4000K, 4500K, 5000K, 5500K, 6000K, 6500K

Niimbot D11H portable label printer (black)Niimbot D11H is a compact label printer, ideal for both home and professional applications. Its small size (109 × 78 × 30 mm) and lightweight design (199 g) make it convenient to use and easy to carry. Thanks to its built-in 1500 mAh battery, the D11H provides 5 hours of operation, and it will take 1-2 hours to recharge.Clear printsWith a resolution of 300 dpi, the Niimbot D11H guarantees clear and precise printing of labels up to 12 mm wide. The high print quality makes the labels legible and aesthetically pleasing, which is especially important in the context of professional applications such as labeling jewelry or clothing tags.Convenient charging and long run timeThe Niimbot D11H printer is equipped with a USB-C charging port for fast and convenient charging. It takes only 1 to 2 hours to fully charge the battery, allowing for about 5 hours of uninterrupted operation. This ensures that the device is almost always ready for action, no matter where or when.Bluetooth connectivity and mobile applicationsThe Niimbot D11H supports Bluetooth connectivity, allowing pairing with up to six smartphones simultaneously (1 iOS device and 5 Android devices), greatly enhancing convenience. The available Niimbot mobile apps and Niim App in the App Store and Google Play, allow you to customize printing settings and design your own labels, greatly enhancing the device's functionality.Versatile applicationsThe Niimbot D11H is widely used in both stores and homes. It will be ideal for labeling spice containers, cosmetics or clothing labels, as well as for professional tasks such as jewelry labeling. With a wide range of personalization options for labels, users can customize the printout to suit their individual needs.Includedlabel printerUSB-A to USB-C cablelabel rolluser manual ManufacturerNiimbotModelD11HColorblackDimensions109 x 78 x 30 mmWeight199 gCharging time1.2 hInput voltageDC 5V/2ABattery capacity1500 mAhResolution300 dpiPrinting width12 mmConnectionBluetoothCharging portUSB-CTransmission power4 dBm Max.Operating temperature5°C - 40°C

A high-end car charger equipped with a UBS-C PD port with a maximum power of 45W and a USB-A QC 3.0 port with 18W. Power Delivery technology adjusts the power on the USB Type C port to the maximum that the device supports, so that devices with lower power consumption do not damage its components and keep the battery in the best possible condition. In this way, it can be used to power a wide variety of devices, including smartphones that support Fast Charging (e.g. iPhone 13/13 Pro) and, if required, even to charge PC or Apple laptops (e.g. MacBook Air). Product features: Total power: 63W Ultrafast USB-C port with a maximum power of 45W Additional USB-A port with 18W Fast charging support for new smartphones Charges the battery up to 50% in 30 minutes (e.g. iPhone 12/13) Power Delivery and QuickCharge 3.0 technology Overvoltage, overcurrent and overheating protection Robust housing made of aluminium and ABS plastic CE and RoHS certified

MagSafe-ga nahast ümbris on meeldiv viis oma iPhone'i kaitsmiseks.; Saate jätkata MagSafe laadija kasutamist.; Sobivus iPhone 12 Pro Max mudeliga.

Lightning USB-C laadimis- ja sünkroonimiskaabel, täismetallist kaabel   eriti tugev MFi laadimis- ja sünkroonimiskaabel Apple iPhone/iPadile (must, hall)   ühildub järgmiste mudelitega: Apple iPhone: iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 mini, iPhone 13, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 12 mini, iPhone 12 iPhone 11 Pro, iPhone 11 Pro Max, iPhone 11, iPhone SE (2. põlvkond), iPhone XS, XS Max iPhone, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus. Apple iPad: 12,9'' iPad Pro (4. põlvkond), 12,9'' iPad Pro (3. põlvkond), 12,9'' iPad Pro (2. põlvkond), 12,9'' iPad Pro (1. põlvkond), 11'' iPad Pro (2. põlvkond), 11'' iPad Pro (1. põlvkond), 10,5'' iPad Pro, iPad Air (4. põlvkond), iPad Air (3. põlvkond), iPad (8. põlvkond), iPad (7. põlvkond), iPad mini (5. põlvkond). Apple AirPod: või Apple AirPods, AirPods Pro, AirPods koos juhtmevaba laadimise ümbrisega (2. põlvkond). Goobay Lightning laadimiskaabel ülikiireks laadimiseks kuni 480 Mbit/s kiire andmeedastusega Punutud tekstiilkaabel koos optimeeritud paindumiskaitsega metall-liitmikel on kaitstud kaabli purunemise eest. Lightning-kaabel on tänu tugevdatud metallpistikule ja tekstiilkattele äärmiselt vastupidav ja tugev Apple Lightning pistikuga laadimiskaabel laeb kõiki iOS-seadmeid, nagu Apple iPhone, iPad, iPod või AirPod mudelid (Apple MFi sertifikaat). USB-C pistik segadusteta sümmeetriliseks ühendamiseks (180° pööratav).

One battery - two operating optionsQoltec gel batteries are an indispensable solution in many fields. Their versatility makes them applicable in various areas where reliable and long-lasting energy supply is needed.The first application is in backup power systems: from UPS power supplies to alarm systems.Another area of their use is in the marine industry: motorboats, electric boats, sailing yachts, and others.Next, we have:- photovoltaic systems,- campers, caravans, forklifts,- large toys.What distinguishes gel batteries is their greater resistance to deep discharge, without losing performance or durability. To provide you with a stable and safe power source, we have prepared an offer of Qoltec gel batteries so that you can choose the variant that best suits your needs.What is gel electrolyte technology?The battery is designed according to the latest gel technology, which offers resistance to the effects of deep battery discharge.This is possible thanks to the gel electrolyte solution. This provides greater durability and stability of the battery.Long Battery Lifespan - Enjoy Energy for Much Longer!An additional advantage of our batteries is their maintenance-free lifespan, allowing them to work for up to 12 years!This is possible thanks to the use of the highest quality components, including pure (non-recycled) lead. Meanwhile, the housing designed with high-quality ABS plastic aims to maximize the battery's lifespan by protecting its interior.However, to maintain their optimal condition, it's important to adhere to appropriate charging and storage practices. After all, when reliability and durability matter, there's no better choice than gel batteries.Green is not a coincidence - be ECO together with us!Someone might ask: how do batteries containing large amounts of heavy metals, such as lead, contribute to environmental protection? There is a simple answer to this. The more we focus on creating high-quality products, the longer their lifespan becomes. Consequently, you will replace them less frequently.In certain matters, compromise is simply not an option.Reliable in Every Aspect - Your Devices' Safety with Gel BatteryFeel safe the unquestionable advantage of gel batteries is their complete maintenance-free operation, and their reliability is maintained for a long time. This is possible thanks to the construction characterized by:- housing tightness,- shock resistance,- possibility of mounting in different positions.By purchasing a 200Ah gel battery, you receive full reliability guarantee. Do you want your equipment to work at full throttle without limitations? Now you can be sure that it will receive the necessary energy without compromises.Take Care of Your Battery, and It Will Serve You for Many YearsRemember that proper usage and care for gel batteries are crucial for their lifespan. To enjoy their long life, try to:- maintain proper charging,- avoid very low temperatures or prolonged exposure to high temperatures,- use a charger suitable for the specific type of battery.How to Properly Charge a Gel Battery for Maximum Lifespan?Gel batteries require charging using the so-called constant voltage method, initially with direct current, and then maintaining a constant voltage.This way, you can avoid the risk of damaging it due to improper charging.

TELESIN Aluminum cage for GoPro Hero 12 / 11/10/9 +vertical adapterTake care of protecting your sports camera from damage and get more interesting recording options. Made of aluminum alloy, the Telesin GP-FMS-G11-TZ protective housing is distinguished by its exceptional durability and is equipped with several mounts so that you can freely mount accessories of your choice on it. It also allows for convenient vertical filming and offers a special protective layer. Reliable protectionHigh-quality aluminum alloy was used to make the housing, making it extremely durable and resistant to damage. What's more, the accessory perfectly fits the shape of the GoPro Hero 12 / 11 / 10 / 9, and as a result can provide it with even better protection. The product is also very easy to install. It is also coated with a special layer that protects the camera from scratches. Convenient useThanks to its well-thought-out design, the case allows you to comfortably use the camera placed in it and does not limit your options. One of the sides of the accessory can be opened, which makes it easy to connect the device for charging. You also have enough space to mount max lenses or ND filters without any obstacles. You can also switch to vertical recording at any time – simply attach the included adapter to the case. Use additional accessoriesGet more options. The housing is equipped with a 1/4″ hole and 2 cold shoe mounts, so you can mount additional accessories on it, such as a tripod, selfie stick, microphone or additional lighting. Create even more interesting video footage and share it with the world! In the boxCaseAllen wrenchVertical clamp with adapterM3*4 screwBrandTelesinNameAluminum alloy rabbit cageModelGP-FMS-G11-TZColorGrayMaterialAluminum alloyDimensions79 x 63 x 33mmWeight65gCompatibilityGoPro Hero 12 / 11 / 10 / 9

BMHCP12LRSWPK BMW Signature Leather Lower Stripe Case for iPhone 12 Pro Max 6.7 Black

Baseus USB to iP cableUSB cable by Baseus is a guarantee of fast data transmission up to 480 Mb/s and fast charging. Made of high quality materials, it is resistant to breaks and mechanical damage. In addition the length of 2m provides convenient use of the product.DurableThe most fragile place - the connection between the cable and the plug, has been reinforced. The cable was made of TPE material, so it is flexible and will not break even when bent to 90°. In addition, thanks to its length of 2m, you can use it, for example, sitting on the couch. In the set, you will also find Velcro strap which makes the storage easier.2in1The product from Baseus will instantly charge your device and allow you to transfer files. Reinforced cable positively affects the speed of charging, and the copper core provides a stable and safe charging power of 2.4A. You can also use the CALYS-C03 for data transmission at speeds up to 480Mbps.Wide compatibilityThe USB cable is compatible with all devices from Apple, for example, iPhone 12 / 8 Plus / 5, iPad 8 / Air 2 / Mini 2 or iPod 6. Such wide compatibility gives CALYS-C03 versatility.BrandBaseusModelCALYS-C03Current2.4ATransmission rate 480MbpsCompatibilityApple Phone: 12 / SE2 / 11 / 11 Pro Max, Xs / Xs Max / X / XP / 8 / 8 Plus / 7 / 7 Plus / 6S / 6S / 6S Plus / 6 / 6 Plus / SE / 5S / 5C / 5 ; Pad: 8 / 10.2" / Pro 9.7" / Air 2 / Air / Mini 4 / Mini 3 / Mini 2 ; Pod 6Cable length2mMaterialTPE + ABSColourBlue

Fast charging and data transfer cable USB-C to USB-CC-12This cable model will allow you to reduce the duration of charging and data transfer to the minimum possible today. The cable is equipped with an E-mark chip, which delivers additional protection for the charged device, especially in cases when the output current of the power adapter exceeds the requirements. The PD protocol allows charging smartphones, tablets, and laptops. It ensures continuous data transfer, even if the connected devices change roles from receiving a charge to data transmission and vice versa. The length of 2 meters makes it especially convenient when charging from the mains. The cable is encased in a strong PVC covering.Features: Connectors USB-C - USB-C PD 100W support Output up to 20V/5A max. Smart E-mark chip for added protection Cable length 2 m Suited to smartphones and laptops Compatible with Macbook models charged via USB-C 

Smart Watch EASY SW-54The Canyon Easy is a daily driver in the world of smartwatches: it is slim, feature-packed, and easy to wear —as the name would suggest. Stylish, functional, and yet affordable.Its 1.7-inch IPS touchscreen is vivid and beautiful and features four watch faces. The watch is also IP68waterproof, meaning it can withstand water submersion up to 1.5 meters deep for 45 minutes.Thanks to Bluetooth 5.3 technology, Canyon Easy offers a stable and fast connection to your smartphone.This watch is designed to help you achieve your health and fitness goals by tracking your steps, caloriesburned, sleep patterns, and heart rate during workouts. It features 14 sports modes, including swimmingand yoga, allowing you to accurately track your physical activity.IPlus, there's a whole set of useful features: notifications for apps and calls, weather forecasts, remotecamera and music control, stopwatch, alarm, and "Find your phone" feature.Battery life is up to 5 days of working time and up to 12 days of standby time. You can use your watch foran entire workweek without charging.Canyon Easy is a neat smartwatch, a little helper on your hand to make life easier and brighter.Fulltouch 1.7" IPS screenStylish slim designLight weightHeart rate monitoringPopular sport modes, calories and distance calculationWeather forecastSilicone strapTrully IP68Sleep trackingRemote camera and music controlCall and APP's notificationsSedentary and water drink alertBig battery capacity & working time up to 5 daysStopwatchAlarmFind phoneSport Modes: walking, running, treadmill, hiking, cycling, swimming, football, basketball, volleyball, badminton, table tennis, baseball, skipping, yoga

EK Water Blocks EK-Quantum Surface S360 - Black At just 30mm thick, the EK-Quantum S-Series surface radiators are ideal for cases with limited space. Despite the reduced thickness, they deliver exceptional performance at very low and medium fan speeds. A total of 16 2mm wide copper tubes along the entire length of the radiator ensure optimal coolant flow and do not burden your cooling loop. High-quality finless copper fins with a density of 20 FPI offer the best balance between heat transfer and air resistance for optimal performance even at low speed fan operation. EK would not recommend a push/pull setup on an EK-Quantum S-Series surface radiator as it does not provide a proportional increase in performance. If more cooling power is needed, installing additional radiators is a good option. New and improved The EK-Quantum Surface S Series cooler maximizes performance by using a new cooler core. When comparing core-to-core performance, the Surface S cooler performs up to 20% better than its predecessor, the CoolStream SE, due to its improved fin structure and optimized core. EK-Quantum Surface Premium radiators are based on years of development and market research to deliver the best product in every respect that the market demands. The processing of the materials, the mechanical rigidity and the performance have been taken to a new level. Like all other products in the Quantum Line, EK's brand new surface coolers offer numerous performance improvements, including thermal performance, coolant flow restriction and airflow restriction. With the included screws, this cooler is compatible with 120mm fans, which have a thickness of 25mm as standard. EK recommends using EK fans or similar with sealed frames. This classic but effective square shape of the fan housing ensures optimal performance in pull (suction) or push (pressure) mode without hydraulic losses, ensuring the optimal cooling performance of your liquid coolers. Thick extruded aluminum end caps with a contrasting silver finish give the cooler a premium look and feel. They cover the interior and connect the stamped side panels, creating a sturdy structure that is comfortable to handle. The stainless steel side panels are coated with durable semi-gloss black paint, while the fins themselves feature a special black matte coating with a high thermal conductivity coefficient. M4 screws – standardized, easy to find Heavy-duty black M4 Philips round head screws are included for ease of use. In general usage scenarios, EK strongly recommends using only the included screws to avoid damage to the cooler itself. However, the M4 screw compatibility allows users to source longer screws if needed. The cooler core is designed in such a way that even if the customer accidentally uses longer screws, it will not affect the structural integrity of the cooler core as they will only collide with the fins. Easy disassembly – DIY modding dream The EK Quantum Surface range has been designed and engineered as a modular product range rather than individually sized radiators. Such a design ensures a flawless fit and continuity in appearance while making the disassembly process very simple and straightforward. EK has always supported the DIY modding community, so painting and modifying your Surface radiator is a breeze. Loop friendly – Don’t worry about your pump The internal structure of the coolers has been designed with low flow restriction so as not to place unnecessary strain on the rest of the cooling loop. This means that you can add multiple radiators to your cooling loop using just a single pump (D5 or DDC). The coolers are also airflow friendly and low restriction, allowing operation at lower fan speeds while maintaining the same performance. Low airflow restriction ensures that the case is well ventilated and other radiators in the case can breathe properly. EK-Matrix7 compatible – for the cleanest pipe runs Since each custom liquid cooling loop is made up of multiple EK products, the most valuable difference in terms of aesthetics and usability comes from the sum of all the parts. To address this problem, EK launched Matrix7, a system that standardizes product dimensions and connector location and spacing. This way, we make liquid cooling loop assembly more intuitive and ensure a clean set of parallel pipe runs easier than ever before. All EK-Quantum Surface emitters are EK-Matrix7 compatible, meaning they integrate effortlessly with Reflection², the second generation of Quantum distribution panels. This allows the user to easily swap and upgrade between S-, P- and X-series surface emitters within the same enclosure (provided the enclosure supports thicker emitters in the same position). The EK-Quantum Surface S cooler wins TechPowerUp's Editor's Choice award The EK-Quantum Surface S radiators have been awarded the Editor's Choice award by TechPowerUp. They praise this product and list the following benefits among others: good value for money, increased case compatibility, excellent thermal performance for the form factor, little restriction of coolant flow, two color options to choose from, modifiable with replacement cover plates and so on. "I will happily recommend the EK-Quantum Surface S," says the reviewer, "and look forward to trying out the rest of the EK-Quantum Surface cooler series!" Technical and material specifications: High-quality fins made of 99.9% copper Copper H90 pipes End tank chambers made of brass H62 Stainless steel side panels End caps made of extruded aluminium, silver anodised Brass nickel-plated adapters and plugs Dimensions: 405 x 130 x 30 mm (L x W x H) Weight: 0.95kg FPI: 20 Connection thread: 2x G1/4 inch Fan compatibility: 120 x 120 x 25 mm fan Pressure tested: 1 bar Attached: EK-Quantum Surface S-Series Coolers 12 x M4 x 30 mm for 25 mm thick fans 12 x M4 x 5 mm for direct mounting of the cooler to the case. Designed and engineered in Slovenia, manufactured in China.

Shelly BLU Bluetooth door/window sensor (white) Shelly BLU detects the opening and closing of doors and windows and has a light sensor. It can also measure the angle of the door or window. It is powered by a CR2032 battery (included), which has a lifespan of 5 years. It will find its use in homes, offices, restaurants, stores, hotels, etc. In addition, it connects wirelessly via Bluetooth 4.2 and provides a range of up to max. 30 m. 2 operating modes In Regular mode, the device sends information about the current status of the door/window, light intensity and battery status every time it is opened/closed. In addition, it checks the tilt angle every 8 seconds. In Beacon mode, on the other hand, the sensor sends information about the current opening/closing status, light intensity and battery status every 30 seconds. You enable the mode in the device settings in the Shelly Smart Control app. ManufacturerShellyModelBLU Door/WindowColorwhiteDimensions35 × 35 × 7 mm ±0.5 mm (Sensor Unit), 35 × 12 × 7 ±0.5 mm (Magnet)Weight10 g ±1 g (sensor + battery), 8 g ±1 g (magnet)MaterialPlasticAmbient temperature-20 °C to 40 °CHumidity30% to 70% relative humidityPower supply1x 3 V CR2032 battery (included)Battery life5 yearsReed switchYesG-sensorYesLight sensorYesRF band2400 - 2483.5 MHzMax RF power4 dBmBluetooth version4.2Bluetooth rangeUp to 10 m, indoors, up to 30 m outdoors (Depends on local conditions)EncryptionAES (CCM mode)

Shelly Qubino Wave 1 Controller Shelly Qubino Wave 1 is a Z-Wave™ smart switch that allows remote control of various devices such as electric locks and lighting. It features voltage-free contacts and low power consumption, and operates in Z-Wave bands to ensure connection stability. Automation capabilities include control of lighting, electric locks and garden irrigation. It also provides security with AES128 encryption and is compatible with many other Z-Wave devices and gateways. Shelly Qubino Wave 1 is a solution for convenience and efficiency in smart home management. Z-Wave compatibility This controller is compatible with certified Z-Wave gateways and more than 4,000 other devices, allowing for easy integration into your existing smart home infrastructure. This allows you to remotely control and monitor your devices, giving you full control over the energy consumed by each one. Customize your home to fit your schedule With Shelly, you'll make every light switch smart! What's more, it will give you the ability to control them with your phone or voice assistant. Use the gateway to create automatic sleeps based on sunset/sunrise. You can set the lights to turn on when you get home from work or turn off when it's bedtime for the whole family. But don't worry - you can still use manual control to adjust the lights to your needs. More options That's not all, though! You can configure Wave 1 with other devices in your Z-Wave network, create links between them and enjoy gateway-free communication! This way you can, for example, automate your lock and door lights. Once you set up a rule, it can make the lights in the hallway/corridor turn on when the front door is unlocked. See for yourself how easy it is! Helper in the garden and beyond Keeping a beautiful lawn by the intensive mode of life can be troublesome, but Shelly is useful not only in the house, will also be an indispensable helper in the garden. Shelly helmsman Wave 1 you can use to irrigation system, thanks why you can manage it with your smartphone, even if you are on vacation. You can also set operating schedules for added convenience. Or maybe you can't remember if you closed the garage door? Now you can check it on your smartphone! Shelly Wave 1 shows an operating voltage of 12V DC 0 24-48V DC, so it will be ideal for controlling your garage door. ManufacturerShellyModelQubinoWave1Power supply110-240 V AC / 24-48 V DC / 12 V DC ± 10%Power consumption< 0.3 WMax. switching voltage AC240 VMax. switching current AC16 AMax. switching voltage DC30 VMax. DC switching current10 AProtection against overheatingYesDistanceUp to 40 m indoors (131 feet) (depending on local conditions)Z-Wave™ repeaterYesProcessorZ-Wave™ S800Z-Wave™ frequency bands868.4 MHz; 865.2 MHz; 869.0 MHz; 921.4 MHz; 908.4 MHz; 916 MHz; 919.8 MHz; 922.5 MHz; 919.7-921.7-923.7 MHz; 868.1 MHz; 920.9 MHzMaximum radio frequency power transmitted in the frequency bands< 25 mWSize (H x W x D).37x42x16 ±0.5 mmWeight26 gMounting:wall consoleScrew terminals max. torque0.4 NmCable cross section0.5 to 1.5 mm²Cable length without insulation5 to 6 mmSheath materialplasticColorblueAmbient temperature-20°C to 40°C / -5°F to 105°FHumidity30% to 70% relative humidityMax altitude2000 m

> 5-MP 1/2.7" CMOS image sensor, low luminance, and high definition image. > Outputs max. 5 MP (2960 × 1668) @20 fps, and supports 2688 × 1520 (2688 × 1520) @25/30 fps. > H.265 codec, high compression rate, ultra-low bit rate. > Built-in IR LED, and the max. illumination distance is 40 m. > ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments. > Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes. > Intelligent monitoring: Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human). > Abnormality detection: Motion detection, video tampering, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection. > Supports max. 256 G Micro SD card; built in MIC. > 12 VDC/PoE power supply, easy for installation. > IP67 protection. > SMD Plus.

Baseus CW01 magnetic car mount for grille with USB-A charger, 15W + 25W (black)Baseus CW01 is a combination of a car charger and a practical magnetic mount, indispensable while driving. With its help, you can easily charge your iPhone without having to turn off the navigation or music player. The charger supports fast charging with a total power of up to 40W and automatically adjusts it to the connected devices, ensuring their safety. The product features pleasant lighting, and is child's play to install and use.Fast magnetic chargingThe robust magnet the charger is equipped with supports MagSafe charging, with a peak power of 15W. It guarantees a stable connection with no interference, so you can not only charge your phone easily, but also successfully use CW01 as a car mount under any circumstances.Practical holderThe extraordinary strength of the magnet allows you to grip your phone and keep it safe while driving. So you can comfortably use your navigation or music player without worrying about your phone getting damaged. When your phone reaches full charge, the charger automatically stops giving power. You can continue using the holder without worrying about overcharging your iPhone. What's more, the mount is 360° adjustable, which means you can position your phone vertically or horizontally. The choice is yours!Easy installationThe charger is powered by a cigarette lighter socket, and you can easily mount the magnetic mount on the air vent grille. The built-in remote control allows you to manually turn the power on/off. What's more, the magnetic ring offers a moody blue light, so you can easily find it even after dark and quickly connect your phone.Wide compatibilityThe product is designed for 12-14 series iPhones, so you don't have to worry about system compatibility or unstable connection. What's more, the charger socket offers a universal USB-A port, so you can charge an additional device of your choice. Product nameBaseus magnetic car holderModelCW01Manufacturer codeC40141000111-01ColorblackMaterial ABS + PC + siliconeLength1,2 mLighting effectIce blueInput voltageDC 12V 24VRated power40W (15W + 25W)Wireless charging output5W/7.5W/10W/15W maxUSB-A output5V/3A; 9V/2.77A; 12V/2.08AInstallation locationVentilation grille

Magnetic Car Mount Baseus T-SpaceThe Baseus T-Space magnetic car mount is dedicated to Teslas and you can mount it both on the dashboard and behind the control panel. It also offers an adjustment function. In addition, the product is distinguished by its magnetic, foldable design, and the metallic finish will blend in perfectly with the interior of your Tesla. It is compatible with iOS and Android smartphones. You will also find a magnetic ring included, which will allow you to attach selected models to the holder.Tailored to your needsCustomize the position of your smartphone to suit your needs. You can adjust its height and rotate it 360° for greater convenience when using navigation while traveling, for example. In addition, you mount the holder on the back of the control panel or on the dashboard in front of the steering wheel - the choice is yours.Thoughtful designDon't be afraid of damaging your smartphone. The mount is equipped with 20 neodymium magnets, which are responsible for stability - they can hold up to 10 iPhone 14 Pro Max. The foldable design means that the product will not take up much space, and the silicone finish protects your smartphone from scratches. In addition, you will attach the holder to the surface of your choice with 3M tape, which does not leave marks after peeling it off.CompatibleThe mount features wide compatibility, so you don't have to worry that it won't fit your equipment. It works with iPhone 12/13/14 series, and for 8-11 series and Android smartphones, use the magnetic ring (included).Includedmountmagnetic ringManufacturerBaseusManufacturer codeC40151300S11-00ColorsilverMaterialaluminum alloy, PC, ABSWeightapprox. 120 gDimensions176 x 57 x 35 mm

Blitzwolf BW-S28 260W, 2xUSB-A, 3xUSB-C, 15W wireless charger (black)The BlitzWolf BW-S28 network charger is an advanced solution for charging multiple devices simultaneously. With a maximum output power of 260 watts and five ports (2xUSB-A, 3xUSB-C), it allows you to efficiently power up to five devices at once. The product is also distinguished by wide compatibility and a digital display that provides access to information on current parameters. It also allows wireless charging, which further enhances its functionality.GaN technology for faster and more efficient chargingThe BlitzWolf BW-S28 uses GaN (gallium nitride) technology for greater energy efficiency and better heat dissipation. As a result, the charger not only charges your devices quickly, but also maintains a low temperature during operation, prolonging its life and making it safer to use. The solution used also made it possible to reduce the size of the product.High output power and support for fast chargingThe charger's USB-C1 port offers a maximum output power of 140 watts, which means you can easily charge even the most demanding devices, including laptops and tablets. What's more, the product supports various fast charging standards, such as PD3.1, QC4+, PD3.0, QC3.0, QC2.0, PPS and SCP, for example. This way you don't have to wait too long until your devices are ready to work again!Simultaneous charging of five devicesWith five available ports, the charger allows you to charge five devices simultaneously, making it ideal for families, offices and more. Forget about having to wait until one device is charged before plugging in another! An additional advantage of the BW-S28 is its wide compatibility. With its help you can easily charge most popular models of laptops, smartphones, tablets, headphones, portable game consoles and much more.Digital display and easy operationThe BlitzWolf BW-S28 charger is equipped with an intuitive digital display that shows the current voltage and amperage for each port, giving you full control over the charging process. What's more, a touch-sensitive button allows you to turn the display on and off, which is convenient especially during nighttime use.Wireless chargingThe BW-S28 also supports wireless charging with up to 15 watts of power, so you can conveniently charge compatible smartphones. In addition, the non-slip silicone on the surface of the device ensures the stability of your phone while charging, preventing it from sliding or falling.Complete safety and protection for your devicesThe BW-S28 charger is designed for maximum safety, offering protection against overcurrent, overvoltage, overheating, overload, short circuit and overcharging. So you can charge your devices without worrying about damaging them.IncludedChargerPower cableUser manual ManufacturerBlitzWolfModelBW-S28ColorBlackInputAC 100-240 V / 50-60 HzOutput power260 WOutputUSB-C1: PD3.1 5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 5 A, 28 V / 5 A / PPS: 3.3-21 V / 5 A, 140 W (Max); USB-C2 / USB-C3: PD3.0 5 V / 3 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 5 A / PPS: 3.3-21 V / 5 A, 100 W (Max.); USB-C2 + USB-C3: 45 W + 45 W; USB-A1 / USB-A2: QC3.0 5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A, 4.5 V / 5 A, 5 V / 4.5 A 22.5 W (Max.); USB-A1 + USB-A2: 12 W + 12 W; Wireless Charging: 15 WATT / 10 WATT / 7.5 WATT / 5 WATT;Supported standardsPD3.1, QC4+, PD3.0, QC3.0, QC2.0, PPS, SCP, FCP, AFC, PEMaterialPC + ABSDimensions126 x 116 x 50 mmWeight542 g

The AXAGON RSS-CD12 internal frame is designed to be mounted instead of the existing 12.7 mm CD/DVD drive. It is designed for 2.5" SSD/HDD SATA drives. You can easily replace the optical drive in your laptop with a hard drive. The SATA 6G interface allows you to enjoy the speed of modern SSD disks up to 6 Gb/s. Thanks to the absence of complex electronics, it does not slow down the data transfer speed and supports all modern functions such as TRIM. This reduction ensures wide compatibility with various notebook brands. The ODD frame can be set via double switch so it will work with most notebook brands like LENOVO, HP, DELL, ASUS, ACER, SONY, TOSHIBA and others. It is possible to use standard 2.5 SSD disks with a height of 7 mm as well as hard disks with a height of 12.5 mm. The ODD caddy with mounted disk behaves like a standard hard disk in the operating system and in the BIOS (UEFI). By inserting a disk into the adapter, you can easily add an internal 2.5" disk, which can be used to supplement an existing notebook disk. Booting support can significantly speed up older notebooks by adding a 2.5" SSD disk. The unique screwless disk mounting system is secured with a rubber spacer or rubber thread plugs. Rubber insert plugs also help minimize hard drive vibration. Metal springs help fix the adapter in the optical drive bay. The metal frame body is made of aluminum and ensures perfect mechanical protection of the inserted disk. The built-in HQ capacitor helps stabilize the SSD/HDD power supply. Elegant built-in LED indicates disk insertion and data transfer. The package also includes a plastic faceplate (front panel) imitating the front of the optical CD/DVD drive. There are several mounting holes on the back of the reducer to fix in the notebook body. Input: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), 13 pin (7+6) SLIM SATA data and power male connector for notebook connection. Output: SATA interface, compatible with SATA 6G (SATA III), SATA 3G (SATA II) and SATA 1.5G (SATA I), supports 2.5" SSD/HDD, maximum disk capacity all without limitation, maximum disk height - 12.5 mm, standard 22 pin (7+15) SATA data and power female connector for 2.5" disks. Other features: Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s (600 MB/s). Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s). Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s). The overall speed depends of inserted disk type and the SATA interface version of the notebook optical drive. It is a pure hardware reduction - for all operating systems, no drivers are installed. Disk boot support in external adapter. Full Plug and Play support. The adapter is powered by a 6-pin Slim SATA power connector. Built-in HQ capacitor for stabilized SSD/HDD power supply. The dimensions of the frame correspond to the slim 5.25" position in the laptop. Aluminum body for disk protection and disk cooling. Other features: Adapter dimensions 128 x 127 x 12.7 mm. Adapter weight 78 g (without faceplate). Notice:The height of the original optical drive must be determined before replacement. RSS-CD12 is designed for a 12.7 mm height. Package contains: ODD adapter for 2.5 SSD/HDD, 4 rubber plugs, plastic pry bar, screwdriver, faceplate (front panel), printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box.

Powerbank Romoss WSC10 10000mAh 20W (black).The Romoss WSC10 Powerbank is the perfect combination of capacity, functionality and safety. Whether you're traveling, at work or just need a reliable power source, the Romoss WSC10 is ready to provide the energy you need. Bet on comfort, style and reliability - choose Romoss WSC10 and enjoy full mobility without worrying about a discharged device.Universal compatibility - one solution for multiple devicesRomoss WSC10 stands out for its full compatibility with a wide range of devices. Thanks to the magnetic charging function, the powerbank works perfectly with the iPhone 12, 13 and 14 series for convenient wireless charging. In addition, with its 20W wired charging, the Romoss WSC10 will power smartphones from other manufacturers such as Huawei, Samsung, Xiaomi, OPPO and VIVO, so you have one device for all your power needs.Fast charging and high performanceThe Romoss WSC10 offers impressive fast charging capabilities - 18W for wired charging and up to 15W for wireless charging. In 30 minutes, you can charge your iPhone 14 Pro up to 60% with a cord or up to 25% wirelessly. With a battery capacity of 10000mAh, the powerbank allows you to charge most modern smartphones up to two times, providing uninterrupted access to power during your daily challenges.Security at the highest levelThe safety of your devices is a top priority, which is why the Romoss WSC10 is equipped with an advanced protection system that includes ten levels of protection, including overheating, overvoltage, overload and short circuit. Multi-Protect Safety technology, along with an NTC system for temperature monitoring, maintains optimal operating conditions, ensuring safe use even during heavy charging.More capacity, smaller sizeAt just 218g in weight and compact size, the Romoss WSC10 is extremely portable and easy to carry. Thanks to its powerful built-in magnets (with a strength of 14N), the powerbank stably adheres to the back of your iPhone, providing convenience when charging on the go. It seamlessly charges devices wirelessly and wired simultaneously, making it an ideal choice for both travel and everyday use.Includes:powerbankcharging cableuser manual ManufacturerRomossModelWSC10Battery capacity37 Wh, 10000 mAhRated capacity6000 mAh (5V/3A)Input5V⎓3A or 9V⎓2A (Type-C)Output (wired)5V⎓3A or 9V⎓2.22A or 12V⎓1.67A (Type-C)Output (wireless)5W, 7.5W, 10W, 15W (maximum)Total output power15W (maximum)Dimensions104 x 67 x 20.5 mmWeight~218 gColorblack

Colmi V75 smartwatch (black)Meet the Colmi V75 - a modern smartwatch that combines advanced technology and maximum functionality. With active users in mind, the Colmi V75 offers extensive health monitoring, navigation and support for daily challenges, becoming the ideal choice for those who want to have all the most important information always at hand - or on their wrist.Head for adventure with a reliable compassWith the Colmi V75, you don't have to worry about losing your direction! With a built-in compass based on a geomagnetic sensor, the watch is perfect for the field, making it easy for you to navigate unfamiliar places. Support for as many as four satellite systems - GPS, BDS, GLONASS and GALILEO - ensures that the smartwatch accurately records your every move. Going for a hike in the mountains, a long bike ride, or maybe a canoe trip? Colmi V75 will show you the right way, allowing you to focus on what's really important - the pleasure of your trip!Precise measurement of altitude and pressurePrepare for every stage of your expedition with the function of precise measurement of altitude and atmospheric pressure. The Colmi V75 integrates advanced sensors that allow you to monitor ambient conditions in real time, which is crucial for outdoor enthusiasts. Gain confidence that you are prepared for any change in weather and make informed decisions based on accurate data.High resolution HD screenWith a 1.45-inch HD screen, the Colmi V75 provides a bright and clear image, even in intense sunlight. All notifications and workout data are clear at a glance, and the touch interface allows quick access to the most important functions. You can customize the look of the watch according to your preferences, choosing from more than 100 dials and 8 interfaces. Whether you prefer a minimalist or more dynamic setting, you'll find the perfect option for you!Talk on your wristForget about searching for your phone in your backpack or pocket - with the Colmi V75 you can make phone calls directly from your wrist. The intuitive interface allows you to quickly answer calls, view history and manage contacts. A secure, fast and convenient solution that's perfect for travel and everyday use.Monitor your health around the clockColmi V75 is your personal health assistant. The smartwatch monitors key health indicators such as heart rate, blood oxygen levels and blood pressure. It also allows you to accurately track the quality of your sleep, recognizing phases of deep and light sleep to help you get the best recovery. With women's health in mind, the Colmi V75 also offers a menstrual calendar to keep track of your cycle. In addition, the smartwatch will remind you when you need to hydrate and signal prolonged sitting, supporting a healthy lifestyle.Sport modes for everyone - more than 100 possibilitiesWhether you run, climb or do other sports, the Colmi V75 will adapt to your activity. You can freely choose from more than 100 available sports modes, which precisely monitor every movement and provide detailed data on the results of your workout. Thanks to intelligent algorithms, the watch analyzes your progress, allowing you to constantly raise the bar and improve your skills.Always stay up to date with notificationsDon't miss any important notification! Just lift your wrist to check text messages, appointment reminders, notifications from your favorite apps and social media alerts - all visible at a glance. With the Colmi V75, you'll stay connected to the world wherever you are.Powerful battery that will keep up with youFrequent charging? Not with the Colmi V75! Powered by a 650 mAh battery, this smartwatch provides up to 10 days of operation even with heavy use. In turn, it can last up to 90 days in standby mode! Plan long trips and be sure that your watch will keep up with you - from dawn to dusk.Water and dust resistance - whatever the conditionsNo rain, puddle or dust is an obstacle for the Colmi V75. Thanks to its robust 1ATM water-resistant construction, you can freely use the watch even in harsh conditions without worrying about damaging it. It is the perfect choice for people who love adrenaline and are not afraid of challenges.A multitude of functions at your fingertipsColmi V75 is not just a watch - it is a multifunctional assistant for everyday life. Get access to weather forecast, alarm clock, stopwatch, music control via Bluetooth and many other functions. All to help you organize your day! What's more, with its built-in voice assistant, the Colmi V75 makes it easy to manage tasks - just issue a command to check the weather, locate a restaurant, start a workout or make a call. IncludedsmartwatchUSB charging cableuser manual ManufacturerColmiModelV75Display typeIPSDisplay size1,45"Resolution412 x 412ChipRealtek8763EWEGPS chipAG3352BGSensorSilicone QMA6100PMain functionsBuilt-in GPS, altitude, air pressure, compass function, AI voice assistant, Bluetooth calling function, calculator functionHealth monitoring functionsHeart rate monitoring, blood pressure monitoring, blood oxygen monitoring, sleep monitoring, all-day heart rate measurementPhysical activity monitoring functionsNumber of steps, number of calories, distance, stopwatch, timerOther functionsBrightness adjustment, screen off time setting, wrist screen activation, 8 menu styles, power saving mode, do not disturb mode, vibration intensity selection, time format, weather forecast, music control, alarm clock, phone search, 12 user interface switches (customizable dial), do not disturb mode, water reminder, remote shooting, menstruation reminder, heart rate warning, long sitting reminder, phone search, incoming call rejectionSport modes107 sports modes (walking, running, outdoor cycling, skipping, basketball, climbing, tennis, rugby, golf, yoga, fitness, dancing, baseball, hiking, stationary cycling, casual training, skiing, bowling, dumbbell training, squats, hiking, indoor walking, indoor running, cricket, kabaddi, GPS walking, GPS running, GPS outdoor cycling, GPS running, GPS, sailing, rock climbing, skateboarding, rollerblading, running, Dune buggy, paragliding, triathlon, climbing machine, stair climbing, treadmill, core training, flexibility training, Pilates, gymnastics, stretching, strength training, cross training, aerobics, physical training, squash, barbell training, pull-ups, upper limb training, functional training, bobby hop, back training, lower limb training, high-intensity interval training, weight lifting, square dancing, belly dancing, ballet, Zumba, Latin dancing, hip-hop dancing, folk dancing, jazz dancing, boxing, wrestling, martial arts, Tai Chi, Thai boxing, judo, Taekwondo, Karate, free fighting, fencing, fencing/kendo, volleyball, softball, field hockey, table tennis, handball, squash, billiards, darts, beach volleyball, beach soccer, rattan, ice skating, curling, snow sports, snowmobiling, ice hockey, tobogganing, archery, darts, tug-of-war, hula-hoop Kite flying, horseback riding, frisbee, fishing, equestrian, athletics, racing) GPS motion trajectory function in the app (the watch itself has no GPS positioning function)Battery capacity650 mAhStandby timeApproximately 90 daysOperating time (intensive use)About 7-10 daysOperating time (normal use)12 daysOperating time (using GPS)Up to 10 hoursCharging methodMagnetic chargingWater resistance1ATMMemoryRAM 578 KB + ROM 512 MbApplicationDaFitCompatible systemsiOS9 and later, Android 4.4 and laterBluetooth version3.0/5.2MaterialZinc alloy + plasticDimensions of the watchApproximately 58 x 53 x 14 mmStrap width22 mmLanguages13 languages: Chinese, traditional Chinese, English, German, Korean, Spanish, Japanese, French, Russian, Arabic, Ukrainian, Italian, Portuguese (English as factory default language)Notification languagesEnglish, German, French, Italian, Greek, Latin, Spanish, Portuguese, Romanian, Polish, Russian, Ukrainian, Belarusian, Bulgarian, Serbian, Macedonian, Croatian, Bosnian, Thai, Hindi, Sanskrit, Nepali, Cambodian, Vietnamese, Lao, Persian, Kurdish, Pashto, Punjabi, Turkish, Berber, MalaysianLanguages in the application27 languages: Arabic, Bulgarian, Czech, Danish, German, Spanish, Finnish, French, Hindi, Croatian, Indonesian, Italian, Japanese, Korean, Norwegian, Dutch, Polish, Pashto, Portuguese, Russian, Swedish, Thai, Ukrainian, Vietnamese, Simplified Chinese, English, Traditional Chinese

Choetech T518 Magnetic Wireless Charger 15W (white)Enjoy fast and convenient charging of your smartphone. The Choetech T518 inductive charger stands out with a power output of up to 15W and is equipped with 16 magnets, so it can ensure stability and safety for your charged devices. The device also stands out for its wide compatibility and lightweight, compact design.Fast charging - wide compatibilityForget the long wait until your devices are ready to use. The charger provides plenty of power to charge your equipment in a very short time. The product is compatible with the iPhone 14, 13 and 12 series and will also work well with AirPods, for example. Simply place your smartphone or headphones on it and it will charge them in no time!Safety firstThe T518 charger is not only efficient, but also safe. It is equipped with up to 16 magnets to keep your smartphone stable, protect it from drops and allow you to use it comfortably while charging. What's more, the device has been given multi-level protection against overvoltage, overheating, overcurrent, over-discharge and overcharging. Don't worry about damaging anything!Convenience of useTo charge your smartphone with the charger, you don't need to take it out of the case. The T518 works perfectly with MagSafe cases and with regular cases up to 6 mm thick. This makes it extremely convenient and hassle-free to use! What's more, the charger is very light and compact with a thickness of only 5.5 mm. So you can freely use your phone while charging and, for example, watch a series or play a game.BrandChoetechModelT518ColourWhiteInterfaceUSB-CInput5-12 V / 2 A max.Output15 W max.MaterialAluminium alloy + siliconeDimensions129.4 x 75.7 x 74.6 mmWeight110 g

Joyroom JR-W020 Mini 20W Inductive Powerbank (black).The Joyroom JR-W020 Mini is the perfect combination of style, functionality and safety. With its impressive capacity, fast charging options and compact size, it becomes an indispensable accessory for any smartphone user. By investing in this powerbank, you get a reliable source of energy that is always at hand, regardless of the situation.Powerful capacity in a compact formMeet the Joyroom JR-W020 Mini 20W - the perfect solution for those who value mobility and reliability. Equipped with an impressive 5000 mAh battery, this sleek powerbank provides a full charge for your iPhone 15 and iPhone 12 up to 1.2 times. Thanks to its compact size and extreme light weight, you can take it with you anywhere without worrying about extra weight in your pocket or bag.Safe and stable chargingThe Joyroom JR-W020 Mini powerbank is designed for maximum comfort. The built-in magnet with 10N pulling power ensures smooth connectivity and secure charging of your smartphone. Your phone stably adheres to the powerbank, eliminating the risk of accidental disconnection while charging.Fast and versatile charging optionsWith PD's 15W wireless charging technology and PD's 20W (USB-C) and 18W (USB-A) wired charging technology, you have complete freedom to choose the charging method that suits your needs. With PD20W technology, your smartphone will be charged to 60% in just 30 minutes. Regardless of the situation, you can always count on a fast and efficient charge for your device.Advanced technology for your safetyThe Joyroom JR-W020 Mini 20W Powerbank is equipped with an advanced NTC chip that monitors the temperature during charging. This ensures that your device is protected from overheating and other potential hazards for safe daily use.Comprehensive compatibilityThe Joyroom JR-W020 Mini powerbank is fully compatible with the latest models of the iPhone 12, 13, 14, 15 series and newer. No matter what model you have, you can be sure that this powerbank will live up to your expectations. Don't wait - invest in the Joyroom JR-W020 Mini 20W and enjoy uninterrupted use of your device at the highest level! ManufacturerJoyroomModelJR-W020 MiniBatteryLithium-polymerBattery capacity5000 mAh 3.7 V (18.5 Wh)Rated capacity3000 mAh (5 V = 2.4 A)Type C input power5 V = 3 A, 9 V = 2 AType C output power5 V = 2.4 A, 9 V = 2.22 A, 12 V = 1.67 AUSB-A output power5 V = 2.4 A, 9 V = 2 A, 12 V = 1.5 AWireless charging output power5 W/7.5 W/10 W/15 W (max).Multi-port output power5 V = 2.4 A (max.)Size101 x 63 x 15 mmConstruction materialPC + ABS fireproof materialWeight135g

Hohem iSteady Mobile+ Kit GimbalThe Hohem iSteady Mobile+ Kit Gimbal is a versatile tool for anyone who wants to create professional videos with excellent stabilization and creative effects. With advanced technology, intuitive operation and long battery life, the iSteady Mobile+ Kit is an ideal choice for content creators, vloggers and streamers. Its rugged construction, ergonomic design and expandability with additional accessories make it an indispensable accessory in any creator's arsenal.Reliable 3-axis stabilizationThe Hohem iSteady Mobile+ Kit is an advanced 3-axis gimbal designed for vloggers, streamers, travelers and filmmakers. With the ability to pan 600 degrees, tilt and tilt 320 degrees, the gimbal offers full flexibility to record from different angles and perspectives. The improved 3-axis design ensures smooth and stable shots, even during intense physical activities such as running or walking.Creative possibilitiesThe gimbal supports a variety of modes, such as sports mode, portrait mode, inception mode, dolly zoom, time-lapse mode, automatic object and face tracking, and more, allowing you to realize creative ideas without the need for additional apps or Bluetooth. In addition, it supports ultra wide angle recording mode, allowing you to capture unforgettable moments.High performanceThanks to its flexible switching, the Hohem iSteady Mobile+ Kit gimbal easily changes its orientation from portrait to landscape or vice versa, plus it precisely balances the weight via a sliding arm with a dial. The built-in high-capacity battery provides up to 13 hours of continuous use, while support for reverse charging allows you to charge your smartphone while recording video, and Bluetooth 4.2 support opens up even more possibilities and makes it easy to connect to your equipment of choice.Ergonomic design and versatile featuresThe iSteady Mobile+ Kit Gimbal has an ergonomic handle with a non-slip texture that provides a secure grip and comfort during prolonged use. It is made of high-quality nylon and fiberglass, which ensures long life and protects the equipment from various types of damage. In addition, the equipment is equipped with a detachable led lamp, which makes it easier to create photographs in poorly lit areas.Includedgimbaldetachable LED lampUSB-C cablestorage bagmini standuser manual ManufacturerHohemModeliSteady Mobile+ KitDimensions310 x 115 x 108.5 mmMaterialnylon, fiberglassWeight (together with battery)474 gMaximum load280gBattery performance13hBattery capacity1800 mAhCharging time2 hoursInput5V/2ACompatibilityiPhone: iPhone 14/13/12/11 Pro Max, XS MAX/XS/XR/X/Plus/8/7/6S/6/; Android: Samsung, HUAWEI, XIAOMIWidth of phones58 - 89 mmMechanical performancePanoramic mode 600°, rotation 320°, tilt 320°Operating temperature-10 to 45°CStabilizationiSteady 7.0

KaameraPildiandur: 1/2,7" CMOSMax. Resolutsioon: 2592 (H) × 1944 (V)ROM: 128 MBRAM: 512 MBSkaneerimissüsteem: ProgressiivneElektrooniline säriaeg: Automaatne/manuaalne 1/3 s-1/100 000 sMin. 0,005 lux@F1.6 (värv, 30 IRE)S/N suhe: >56 dBValgustuskaugus: 50 m (164,04 ft) (IR)Lambi sisse/välja lülitamine: automaatne; käsitsiKallutus/kaldeneerimine/pöörlemisvahemik: Pöörlemine: 0°-360°, kallutamine: 0°-78°, pöörlemine: 0°-78°, pöörlemine: 0°-360°.ObjektiivObjektiivi tüüp: fikseeritud fookusegaObjektiivi kinnitus: M12Fookuskaugus: 2,8 mmDidž. F1.6Vaateväli: 2,8 mm: Horisontaalne: 102°; Vertikaalne: 71°; Kalda: 131°DORI kaugusObjektiiv:56 m (183,73 ft)Vaatluskaugus: 22,4 m (73,49 ft)Tuvastus: 11,2 m (36,75 ft)Tuvastus: 5,6 m (18,37 ft)Nutikas sündmusIVS: mahajäetud objekt; kadunud objekt.Soojuskaart: JahIVS (piirdekaitse): sissetung, häirimine, kiire liikumine, peidus olevate isikute tuvastamine, rahvarohkuse ja parkimise tuvastamine.SMD 3.0: vähem valehäireid, pikem avastamiskaugus.Näo tuvastamine: näo tuvastamine; jälgimine; hetkeseade; hetkeseade optimeerimine.Inimeste loendamine: sissetulevate, väljuvate ja mööduvate inimeste loendamine.VideoVideokompressioon: H.265; H.264; H.264H; H.264B; MJPEG (toetatakse ainult allsüsteemis).Video kaadrisagedus: Põhivoog: 2592 × 1944@ (1-20 kaadrit/s)/2688 × 1520@ (1-25/30 kaadrit/s).Biti kiiruse kontroll: CBR/VBRVideo bitikiirus: H.264: 3 kbps-20480 kbpsPäev/öörežiim: Auto (ICR)/Värv/WBLC, HLC, WDR: JahValgetasakaal: Auto; loomulik; tänavalamp; väljas; käsitsi; piirkondlik kohandatudHäireHäiresündmus: SD-kaart puudub; SD-kaart täis; SD-kaardi viga; võrguühenduse katkestamine.VõrkVõrguport: RJ-45 (10/100 Base-T)Küberturvalisus: videokrüpteerimine; tarkvarakrüpteerimine; konfiguratsiooni krüpteerimineVõrguprotokoll: IPv4; IPv6; HTTP; HTTPSToideToiteallikas: 12 VDC/PoE (802.3af)/ePoEEnergiatarve: põhitarbimine: 2,1 W (12 VDC); 2,6 W (PoE)KeskkondTöötemperatuur: -40 °C kuni +60 °C (-40 °F kuni +140 °F)Kaitse: IP67

KaameraPildiandur: 1/2,7" CMOSMax. Resolutsioon: 2960 (H) × 1668 (V)ROM: 128 MBRAM: 256 MBSkaneerimissüsteem: ProgressiivneElektrooniline säriaeg: automaatne/manuaalne 1/3 s-1/100 000 sMin. Valgustus: 0,007 Lux@F1.6 (värviline, 30IRE) / 0,0007 Lux@F1.6 (mustvalge, 30IRE) / 0 luksi (valgusti sisse lülitatud).S/N suhe: >56 dBValgustuskaugus: kuni 30 m (98,43 ft) (IR); kuni 30 m (98,43 ft) (soe valgus).Lambi sisse/välja lülitamine: automaatne; käsitsiLampide arv: 1 (IR LED); 1 (soe valgus)Kallutus/pöördumisvahemik: Kallutamine: 0°-360°; kallutamine: 0°-78°; pööramine: 0°-360°.Objektiivi tüüp: fikseeritud fookusegaObjektiivi kinnitus: M12Fookuskaugus: 2,8 mmM8.1 Meetri pikkus: 1,2 mm (2,0 m); Suurendus: 1,2 mm (2,0 m); Suurendus: 1,2 mm (2,0 m). F1.6Vaateväli: 2,8 mm: H: 111°; V: 58°; D: 132°Ava reguleerimine: fikseeritudLähedane teravustamiskaugus: 2,8 mm: 1,1 m (3,61 ft)DORI kaugus: Objektiivi tuvastamine: 63,6 m (208,66 ft) / Vaatlus: 25,4 m (83,33 ft) / Tunnustamine: 25,4 m (83,33 ft) / Tunnustamine: 12,7 m (41,67 ft) / Tunnustamine: 6,4 m (21,00 ft)IntelligentsusIVS (perimeetri kaitse): Intrusion, trident (toetab sõidukite ja inimeste klassifitseerimist ja täpset tuvastamist).Intelligentne otsing: Töötab koos nutika NVRiga, et võimaldada intelligentset otsingut, sündmuste väljavõtteid ja integreerimist sündmuste videoga.VideosalvestusedVideokompressioon: H.265; H.264; H.264H; H.264B; MJPEG (toetatakse ainult allsüsteemis).Nutikas koodek: Smart H.265+; Smart H.264+.Video kaadrisagedus: Põhivoog: 2960 × 1668 @ (1-20 fps) / 2688 × 1520 @ (1-25/30 fps)Resolutsioon: 2960 × 1668; 2880 × 1620; 2688 × 1520; 3M (2048 × 1536); 2304 × 1296; 1080p (1920 × 1080); 1,3M (1280 × 960).Biti kiiruse kontroll: CBR/VBRVideo bitikiirus: H.264: 32 kbps-8192 kbps; H.265: 12 kbps-8192 kbpsPäev/öörežiim: Auto (ICR)/Värv/B/WBLC: JahHLC: JahWDR: 120 dBValgetasakaal: Auto; loomulik; tänavalamp; väljas; käsitsi; piirkondlik kohandatudHelitugevuse reguleerimine: Auto; KäsitsiMüravähendus: 3D NRLiikumistuvastus: (4 piirkonda, ristkülikukujuline)Huvipakkuv ala (RoI): Jah (4 ala)Nutikas valgustus: JahPildi pööramine: 0°/90°/180°/270°Peegel: JahPrivaatsuse maskeerimine: 4 alaHeli: 1: sisseehitatud mikrofon, helikompressioon: G.711a; G.711Mu; PCM; G.726.Häiresündmused: SD-kaardi probleemid, võrguühenduse katkestamine, liikumistuvastus, video võltsimine jne.RJ-45(10/100 Base-T)Koostalitlusvõime: võrguühendus (USB) (10.5×10): koostöö: ONVIF (profiil S/Profiil G/Profiil T), CGI, P2P, Milestone.Küberturvalisus: video krüpteerimine, konfiguratsiooni krüpteerimine, kontolukustus, HTTPS, IP/MAC-filtreerimine jne.VõimsusToiteallikas: Toiteallikas: 12 VDC/PoE (802.3af)Energiatarve: põhitoit: 2,2 W (12 VDC); 2,9 W (PoE).KeskkondTöötemperatuur: -40 °C kuni +60 °C (-40 °F kuni +140 °F)Kaitse: IP67

Telesin Allin box 3-channel charger + 3 batteries for GoPro Hero 12 / 11 / 10 / 9 (yellow)Specifically designed for GoPro Hero 9, 10, 11 and 12 series cameras, the TELESIN Allin Box combines the functions of charging, storing and reading memory cards. It comes with three high-capacity rechargeable batteries, which offer longer run time compared to the original batteries, providing your camera with unlimited power!Functionality and fast chargingThe Allin Box charger allows you to charge three batteries at the same time, which take just 2 hours to fully charge. This is ideal for those working with their camera in the field. The product also acts as a TF memory card reader, with a maximum read speed of 20 Mbps, making it easy to manage recorded footage.Protection and durabilityThe Allin Box is IP54 waterproof certified. As a result, it will perform well in harsh weather conditions and won't be harmed by accidental splashes. The case of the charger is made of fire-resistant PC, and the protective silicone casing further ensures the safety and durability of the product.Powerful rechargeable batteriesThe included fast-charging 1750 mAh batteries offer a higher capacity than the standard GoPro-branded ones, which translates into longer camera runtime - up to 112 minutes of recording on a single charge, depending on the mode. They are fully compatible with GoPro Hero 9/10/11/12 models.IncludedTELESIN Allin Box three-channel charger x 11750 mAh rechargeable battery for GoPro Hero 9/10/11/12 x 3USB-C 3.0 cable x 1 ChargerManufacturerTelesinManufacturer codeN5 DualInput:Micro USB 5V 2AOutput voltage:4.4V 800mAMaterial:Fireproof PCWeight:245gCharging time:Full charge of three batteries in 2 hoursCable:USB-C 3.0 Rechargeable batteryMaterial:Lithium batteryWeight:33gCharging voltage:4.40VNominal capacity:1750 mAh

Baseus car charger + 2 USB-C cables 60 W (black)The Baseus car charger with two built-in USB-C cables with a total power of 60 watts provides fast charging for two devices at the same time and is ideal for both driver and passenger. The integrated safety system, swivel design and 12-24 volt compatibility ensure reliability in any vehicle.Swivel designThe 180° mechanism used allows you to conveniently position the charger at any angle without tangled wires. Dual 80 cm long cables automatically retract for easy organization of space in the car.Fast chargingBoth cables support fast charging with up to 30 watts each, allowing you to instantly renew the energy of two devices simultaneously. The Baseus charger supports PD, QC, SCP and AFC protocols, making it compatible with many devices.Safety in all conditionsThe temperature control system ensures that the device does not get hot during charging. The charger also provides protection against overvoltage, overload, short circuit and over-discharge.Stability even on a bumpy roadSpring-loaded handles on the sides of the charger guarantee a secure fit in the cigarette lighter socket. Whether you're navigating bumps, speed bumps, or braking suddenly - the charger remains stable and won't interrupt charging.Ready for any tripThe Baseus device works with a voltage range of 12-24 volts, so it fits cars, SUVs and trucks. At night, subtle LED backlighting makes it easy to find the charger and use it without having to turn on additional lights. ManufacturerBaseusManufacturer codeC00035507121-01ColorBlackMaterialPCInputDC 12-24 VWeightapprox. 120 gUSB-C1 / USB-C2:5V⎓3A; 9V⎓3A; 12V⎓2.5A; 15V⎓2.0A; 20V⎓1.5A; 30W max.USB-C1 + USB-C260 W

With the car charger, you can charge all your devices (notebooks, ultrabooks, convertibles, tablets, smartphones, etc.) on the go with just one adapter. Equipped with a 12 - 24 V DC plug, the charger provides mobile power in all types of vehicles: cars, trucks, motorcycles, campers, motorboats and more. Power supply via USB-C and USB-A output in the Qualcomm Quick Charge 3.0 standard - can be used simultaneously with all popular mobile devices and accessories. Fast charging with up to 100 W with a 1.2 m USB-C cable with E marking. This makes the DICOTA universal notebook car charger the ideal companion for fast charging on the go. Universal charger for notebooks, tablets, smartphones and other devices Mobile charging for cars, trucks, motorcycles, campers, motorboats and more while traveling USB-C output with E-Marker USB-C power cable (5-20 V, up to 5 A) USB-A output - can be used simultaneously with most mobile devices (5-12V, up to 1.5A) Output power: 100W (max) Over-current, over-voltage, short-circuit and over-temperature protection function Compact and lightweight design

> Outputs 180° wide angle splicing image. > Outputs max. 8 MP (4096 × 1860)@20 fps. > H.265 codec, high compression rate, ultra-low bit rate. > Built-in IR LED and warm light, the max. IR illumination distance is 25 m and warm light distance is 20 m. > ROI, SMART H.264 +/H.265+, AI H.264/H.265, flexible coding, applicable to various bandwidth and storage environments. > WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes. > Intelligent monitoring: Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human), stay detection, loitering detection. > Alarm: 1 in, 1 out; audio: 1 in, 1 out; supports max. 512 G Micro SD card; built in dual Mic; built in speaker, support two-way talk. > 12 VDC/PoE power supply, easy for installation. > IP67 protection. > Sound and light alarm (red and blue lights). > EPTZ: Enlarge and track the targets of intelligent alarms. > SMD 4.0. > One-tap arming/disarming through alarm input. > Focal Length 2.8 mm > Field of View 180°