Designed to provide accessory mounts and protection for the Nikon Z9 camera. The cage secures to the camera with one 1/4´´-20 screw & locating pin at the bottom and the right side shoulder strap hole. Featuring multiple 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes, support SmallRig Top Handle 2165, Side Handle 2093, 2624, and Monitor Mount 2903. Comes with a cold shoe on the top to attach microphones, LED lights, etc. The bottom integrates an Arca Swiss plate that allows switching directly to tripod shooting and features multiple 1/4´´-20 threaded holes allowing for mounting DJI RS 2/RSC 2 Quick Release Plate (Upper) with two 1/4” screws. The front of the cage features two 1/4´´-20 threaded holes for Smallrig 15mm Rod Clamp 942 that supports lens support, follow focus, matte box, etc. The cage features all-around protective rubber pads inside to prevent scratches and a built-in magnetic slotted screwdriver & Allen Wrench that is easy to use. Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 8 x M3 Screw
RA-D85 deep parabolic softbox is 84cm in diameter and 57cm in depth, which can increase the times of light reflections (increase the illuminating surface and light softness) and produce softer light, which is ideal for portrait shooting SmallRig 3586 RA-D85 Parabolic Softbox Innovative quick release disk structure Adopt new generation of buckle structural design，you just gently lifting and pressing the buckle to finish the installation and disassemble. Even and ideal soft light With highly reflective coating + high-performance Oxford fabric double design, our softboxes are light-tight for a more uniform diffuse light and the natural transition of light effects. The outer layer is sturdy, durable, dustproof and slightly waterproof. The inner layer is smooth, with even light, original color temperature and CRI. Innovative external rib design The revolutionary design of the external ribs is to ensure that the inner is smooth, reduce light loss and achieve a brighter and softer light effect, as well as to avoid rib displacement and puncture of traditional inside ribs. With 16 military-grade high-temperature resistant steel ribs, lighter, tougher and more elastic than ordinary stainless ribs and 3 times easier to install, it can withstand tens of thousands of pressures without deformation. It has 3D and spherical illuminating surface and thoughtful silicone hand guard design prevents hand rubbing during disassembly. Fabric diffusion and grid With two strong and highly transparent softlight cloths and a 45° high-quality fabric honeycomb grid coming with the softbox, you can freely create a more delicate and textured soft light effect, to meet the needs of a variety of scenes. Standard Bowens mount The softbox adopts a Bowens mount, is fully compatible with various accessories with the Bowens mount on the market, and provides more lighting possibilities. Cylinder pouch for easy storage The softbox will come with a cylinder storage pouch having an open top for easy storage.
With a diameter of 65cm, a depth of 56cm and a weight of 1348g, RA-L65 is compact and easy to use; it is made of high-performance soft fabric and highly reflective coating, rendering the color temperature and CRI and creating a more delicate three-dimensional soft light effect through the even spherical light. SmallRig 3754 RA-L65 Lantern Softbox Faster lighting setup with one-piece design One step to set up the softbox: Press the Bowens mount until the bottom hook is hooked. No extra manual work is needed when install and disassemble, for the bottom, rib, and top disk of the lantern is fixed together at the factory. What’s more, the bottom hook is upgraded to a wider one, which can solve the laborious problem and the directions of hook can not be seen clearly, which saves time and make it easier to install. Upgraded construction RA-L65 is equipped with 12 military-grade high-temperature resistant ribs. Lighter, tougher and more elastic than ordinary stainless ribs and 3 times easier to install, it can withstand tens of thousands of pressures without deformation. Flexible light control When doing research, we found that many creators have their own ideas about lighting setups, so it is necessary to provide a few more pieces of fabric diffusion and black fabric barn doors.The softbox will come with standard Black fabric barn door which adopts a Velcro design for easy installation. Standard Bowens mount The softbox adopts a Bowens mount, is fully compatible with various accessories with the Bowens mount on the market, and provides more lighting possibilities. Cylinder pouch for easy storage The softbox will come with a cylinder storage pouch having an open top for easy storage.
Ergonomically designed to improve grip experience, facilitate low-angle shot and reduce burdens on arms. SmallRig 3766 Nato Top Handle The ergonomic handle, featuring anti-slip and anti-freeze silicone, feels comfortable and weighs only 124g because of a hollowed-out structure. It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. ARRI 3/8"-16 locating holes support SmallRig Monitor Mount 2903 and 2348 to attach monitors. 1/4"-20 threaded holes support SmallRig Magic Arm 2070 for monitors and Remote Control 2924 for recording. Its quick-release NATO clamp fits all standard NATO rails. Compatibility: Any accessories features NATO Rail In the Box: 1 x Top Handle
SMALLRIG 4520 Camera Cage Kit for Nikon Z 6III kit includes a cage, an HDMI & USB-C cable clamp, and a top handle. Designed to provide enhanced handheld shooting, portability, and accessory expansion. The cage features multiple expansion options, such as 1/4"-20 threaded holes, 1/4"-20 locating holes, 3/8"-16 threaded holes, ARRI locating holes, cold shoe mounts, NATO rail, QD mounts, wrist/shoulder strap holes, allowing for the expansion of accessories like monitors, microphones, tripods, follow focuses, handles, and more for versatile video content creation across different scenarios. The cage securely locks the camera with a 1/4"-20 screw at the bottom and dual M2.5 screws on the sides. The ergonomic handle facilitates on-the-go shooting, providing a comfortable and stable filming experience. It is equipped with an HDMI & USB-C cable clamp that securely fastens with a simple twist of a thumbscrew, preventing accidental signal interruptions and ensuring stable signal transmission. Arca-Swiss quick-release plate on the bottom is compatible with Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro/ RS 4 / RS 4 Pro gimbals, which allows for easy transitions between gimbals, handheld and tripod setups. In addition, a magnetic dual-head flat wrench is integrated into the baseplate for easy assembly and disassembly. Compability: Nikon Z 6III Packaging includes: 1x Cage 1x HDMI & USB-C Cable Clamp 1x Top Handle
Designed to facilitate a quick transition between landscape and portrait orientations, enhancing both shooting versatility and camera grip. Three-point locking system ensures stability and prevents twisting by securing the camera with a 1/4"-20 screw at the base, a locating block, and the left shoulder strap ring, while integrated pads prevent the camera from scratching. The locating block with the built-in cold shoe mount provides support to stabilize the cage and prevent distortion after extending the side plate in portrait mode. It is also compatible with accessories with cold shoe mounts, such as microphones, LED video lights, image transmission systems, flashlights, etc., providing a lightweight solution to photography or shooting. The side plate can be extended by 22.5mm for convenient cable routing in portrait orientation. Integrated Arca-Swiss quick-release plate on the base supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro gimbals. The bottom features built-in 1/4"-20 and 3/8"-16 threaded holes, allowing seamless compatibility with side handles for handheld vertical shooting solutions, as well as the tripods. The bottom is equipped with a strap hole, compatible with wrist/shoulder straps. A built-in QD interface supports shoulder straps. Additionally, the side panel includes a 1/4"-20 locating hole for accessories such as magic arms. The hinge arm at the battery compartment fits the camera curves and improves its grip comfort. The plate features a built-in magnetic flat wrench at the bottom for easy disassembly and assembly. Compability: Nikon Z 6III Packaging includes: 1x L-Shape Mount Plate 1x Locating Block
SmallRig 3765 ARRI kinnitusega ülemine käepide, millel on 3 eesmist ja 2 tagumist külgkinnitust (cold shoe), mis võimaldavad samaaegselt kinnitada mikrofoni, LED-valgusti, monitori ja muid tarvikuid. ARRI 3/8"-16 kinnitusega augud toetavad SmallRigi monitorikinnitusi 2903 ja 2348, et lisada monitore. 1/4"-20 keermestatud augud sobivad SmallRigi Magic Arm 2070 jaoks monitoride kinnitamiseks ja kaugjuhtimisseadme 2924 jaoks salvestamiseks. Komplektis olev kuuskantvõti aitab lukustuskruvi pingutada, muutes kokkupaneku ja lahtivõtmise lihtsaks. Maksimaalne kandevõime on 10 kg. Ühilduvus: ARRI 3/8"-16 kinnitusega korpused Komplekt sisaldab: - 1 x ülemine käepide - 1 x kuuskantvõti Designed to facilitate low-angle shot and reduce burdens on arms. The ergonomic handle, featuring anti-slip and anti-freeze silicone, feels comfortable and weighs only 124g because of a hollowed-out structure. SmallRig 3765 ARRI Locating Top Handle has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. ARRI 3/8"-16 locating holes support SmallRig Monitor Mount 2903 and 2348 to attach monitors. 1/4"-20 threaded holes support SmallRig Magic Arm 2070 for monitors and Remote Control 2924 for recording. An Allen Wrench helps tighten the locking screw, making it easy to assemble and disassemble. Note: Maximum load capacity is 10kg Compatibility: Cages with ARRI 3/8"-16 locating hole Package Includes: 1 x Top Handle 1 x Allen Wrench Vastutav isik ELis: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA, CASTELLANA 9144, Madrid, 28046, ES, compliance.gavimosa@outlook.com
L-förmige Montageplatte passend für Canon EOS R6 Mark II, Canon EOS R5, Canon EOS R5 C, Canon EOS R6, Abmessungen: 149,2x65,3x88,2 mm, Gewicht: 120g ±5g, Material: Aluminiumlegierung
Universal-Basisplatte, universelle Schulterausrüstung für den Schulterschiessmodus, einstellbare Griffe bis zu 360° zur Unterstützung verschiedener Aufnahmemodi
Multifunktionale Crab-Shaped-Klemme mit Kugelkopf-Magic-Arm und Action-Kamera-Halterung, zur Befestigung an einer Stange mit bis zu Ø 54 mm, Abmessungen: ca.158x92x25 mm, Gewicht: 230±5 g, Tragfähigkeit: 1,5 kg, Materialien: ...
Introducing Little Clothbound Classics: irresistible, mini editions of short stories, novellas and essays from the world's greatest writers, designed by the award-winning Coralie Bickford-Smith. Celebrating the range and diversity of Penguin Classics, they take us from snowy Japan to springtime Vienna, from haunted New England to a sun-drenched Mediterranean island, and from a game of chess on the ocean to a love story on the moon. Beautifully designed and printed, these collectible editions are bound in colourful, tactile cloth and stamped with foil. Step into the unsettling world of Shirley Jackson with a collection of her finest, creepiest short stories, revealing the queen of American gothic at her mesmerising best. This selection includes 'The Lottery', Jackson's masterpiece and one of the most terrifying and iconic stories of the twentieth century. 'An amazing writer ... If you haven't read her you have missed out on something marvellous' Neil Gaiman
Material: Aluminiumlegierung, Edelstahl, Größe: 95 x 41 x 47mm (L x B x H), ausgestattet mit einer Cold Shoe Montage und mehreren 1/4"-20 Gewindelöchern, eingebaute Polsterung für verbesserten Schutz
Formschlüssiger Cage für Sony A7 III / A7R III / Alpha 7R IIIA mit 1/4"-20 Schraube, ermöglicht Zugang zu den Schnittstellen, Einstellräder, Tasten und Batterieklappen, Material: Aluminiumlegierung, Edelstahl, Silikon, Maße: ...
Kompaktes V-Mount Batterie-Montagesystem mit 1/4"-20-Gewindebohrungen und Arca-Swiss Schnellwechselplatte, werkzeuglose Montage und Schnellverschluss, 90 Grad drehbar, zusammenklappbar zum Aufbewahren oder Mitnehmen
Ministatiivvars kiirvahetatava kuulpeaga (sh 1/4-tolline kiirvahetatav kinnitus) mõlemas otsas ja kahe valikulise tüübli jaoks mõeldud varuga seadme läbipaindumise tõhusaks vältimiseks. 360° vabalt reguleeritavad kuulpead, kiire ...
SMALLRIG 5755 X Potato Jet TRIBEX Carbon II Tripod Kit – professionaalne videostatiiv välivõteteks SmallRig TRIBEX Carbon II Tripod Kit (5755) on loodud professionaalsetele videograafidele ja sisuloojatele, kes vajavad kerget, vastupidavat ja kiirelt seadistatavat statiivi. Uus X-Clutch hüdrauliline süsteem võimaldab ühe liigutusega avada kõik statiivijalad, reguleerida nende nurka ja lukustada need automaatselt – kõigest ühe sekundiga. See muudab tööprotsessi erakordselt sujuvaks ja tõhusaks, olenemata võtteoludest. Statiivi kõrgus on reguleeritav vahemikus 27–168 cm, ning tänu kompaktsele 79 cm kokkupandud pikkusele sobib see ideaalselt reisile või välivõtetele. Kerge, kuid erakordselt tugev Statiiv on valmistatud kõrge kvaliteediga süsinikkiust, mis tagab maksimaalse stabiilsuse ja väikse kaalu. Süsinikkiust konstruktsioon vähendab vibratsiooni ja tagab sujuva töö ka raskete kaamerakomplektidega. Keskpost on varustatud kiirlukustussüsteemiga, mis teeb kõrguse reguleerimise kiireks ja täpseks. Lisaks on alumise konksu teises otsas sisseehitatud kuuskantvõti, mis teeb kaamera lisavarustuse paigaldamise mugavaks ja kiireks. Minimaalne kõrgus 27 cm võimaldab madala nurga alt filmimist, mis on ideaalne loovate võtete jaoks. Täiuslik kontroll tänu uuele hüdraulilisele pea disainile Komplektis olev kompaktne vedelikupea (fluid head) pakub täpset ja sujuvat liikumist, olles varustatud neljatasemelise vastukaalu süsteemiga (0–6 kg). See tagab kaamera stabiilsuse ja pehme kalde kontrolli, mis sobib ideaalselt filmide, dokumentaalide ja sotsiaalmeedia videote loomiseks. Vedelikupea Touch-and-Go kiirkinnitusplaat võimaldab kaamera kinnitamist ja eemaldamist sekunditega, ilma kohendamise või joondamiseta. Plaat ühildub 501PL ja DJI RS seeria kiirkinnitustega, mis muudab üleminekud stabilisaatori ja statiivi vahel ülikiireks. Täielik paindlikkus ja kasutusmugavus 45° ja 90° jalarežiimide reguleerimine erinevate võttenurkade saavutamiseks Teleskoopkäepide, mida saab kinnitada vasakule või paremale – sobib iga kasutaja tööstiiliga Kolm 1/4”-20 keermestatud ava lisaseadmete (nt magic armide, mikrofonide või monitoride) kinnitamiseks Vahetatavad kummijalad ja ogad – suurepärane haarduvus nii siseruumides kui maastikul Kompaktne, mobiilne ja usaldusväärne TRIBEX Carbon II tripod kaalub vaid 3,8 kg, kuid talub kuni 25 kg koormust (ilma keskposti tõstmata). See teeb sellest ideaalse lahenduse nii suuremate kaamerate, cine-lenside kui ka välitingimuste jaoks. Põhiomadused Materjal: süsinikkiud, alumiiniumisulamist ja roostevaba teras Kaal: 3,8 ± 0,1 kg Töökõrgus: 27 – 168 cm Kokkupanduna: 79 cm Pea maksimaalne kandevõime: 6 kg Statiivi maksimaalne kandevõime: 25 kg Vastukaalu süsteem: 4-astmeline (0–3) Kaldenurk: +90° / -65° Vedelikupea baas: 65 mm Käepideme pikkus: 23 – 36 cm Lisavarustus: 3 × 1/4″-20 keere, kiirkinnitusplaat 501PL/DJI RS ühilduv Komplektis SmallRig TRIBEX Carbon II statiiv koos vedelikupeaga Allen-võti (sisseehitatud konksu küljes) Nutitelefoni hoidik Kott transportimiseks
How can we rethink teaching practices in the age of multiculturalism? What do we do about teachers who do not want to teach, and students who do not want to learn? How should we deal with racism and sexism in the classroom? This title deals with a different kind of education: education as the practice of freedom.
SmallRig 5195 puur Insta360 X5 seikluskaamerale – turvaline korpus ja laiendatud kinnitused Insta360 X5 kaamerale Tugev kaitse- ja kinnitussüsteem sinu 360° kaamerale: SmallRig 5195 võimaldab kaitsta kaamerat mõjuvabade finishitega korpuses ning avab samal ajal rohkelt võimalusi lisavarustuse ühendamiseks. See korpus on ideaalne valik sisuloojatele, videograafidele ja seiklusfotograafidele, kes kasutavad sinu kaamerat Insta360 X5. Põhifunktsioonid Miks valida see korpus? Kui vajad kompaktset, kerget, ent tugevat kinnitust ja kaitset oma Insta360 X5 kaamerale — annab SmallRig 5195 sulle vabaduse lisada mikrofone, valgustust või statiive ilma, et kaamera enda funktsioonid häiruksid. Olgu tegemist sportlike 360° võtetega, autorallitest või siseinterjööri filmimisega, see korpus on valmis. Kasutusalad SmallRig 5195 Cage for Insta360 X5 on nutikas valik, kui soovid oma Insta360 X5 kaamerat turvaliselt paigaldada ja ühtlasi lisada sellele kinnitusi teiste aksessuaaride ühendamiseks. Kvaliteetne materjal, mitmekülgsed ühendusvõimalused ja huvipakkuv funktsionaalsus teevad sellest tarvik turbokaamerasõbrale.
SmallRig 5060 HawkLock kaamerapuur | Sony A6700 | NATO rels | Arca-Swiss | DJI RS 2/3/4 | HDMI Klamber | 3-punktiline lukk Ühe klõpsuga – HawkLock kiirkinnitus Sony A6700-le SmallRig 5060 on Sony Alpha 6700 jaoks disainitud kaamerakaabits (cage), mis integreerib SmallRigi patenteeritud HawkLock kiirkinnitusstandardit. NATO reil ja Arca-Swiss kiirkinnitusplaat on kohe kaasas – ühe klõpsuga saab lisada HawkLock-ühilduvaid käepidemeid, kinnitusplaate ja muid tarvikuid ilma tööriistadeta. Kaabits kaitseb kaamera kere mehaaniliste löökide eest, pakub kõikidelt külgedelt monteerimispunkte ja võimaldab kiiresti liikuda käeshoitava pildistamise, statiivi ja DJI RS stabilisaatori vahel. HawkLock – mis see on ja miks see oluline on? HawkLock on SmallRigi patenteeritud kiirkinnitusstandardard, mis ühendab NATO reili ja Arca-Swissi ühes süsteemis: Komponent Standard Funktsioon NATO reil NATO MIL-STD (universaalne) Külgmiste tarvikute (käepidemed, monitorid, mikrod) kiirkinnitus Arca-Swiss plaat Arca-Swiss (universaalne) Statiivi pea ja DJI RS stabilisaatori kiirkinnitus HawkLock mehhanism SmallRigi patent Ühe klõpsuga turvamine – ei libise ega vaju lahtiseks HawkLock-ühilduvad SmallRigi tarvikud (nt külgkäepide 4485, kiirkinnitusplaat 4486) kinnituvad otse SmallRig 5060 NATO relsi – tööriistu ei ole vaja, klõps on turvaline. 3-punktiline lukustussüsteem – kaabits ei liigu Kaabits kinnitatakse Sony A6700 külge kolmes eraldi punktis: Kinnituspunkt Tüüp Funktsioon Alumine tihvt Tihvt-kinnitus Positsioneerimine – hoiab kaabits täpselt paigas Vasak külgkruvi M2.5 kruvi Surve küljelt – takistab pöörlemist Parem külgkruvi M2.5 kruvi Surve küljelt – täiendav fiksatsioon Kolmepunktiline kinnitus tagab, et kaabits ei nikserda ega pöörle kaamera peal – isegi intensiivsel kaadrisuunamisel. Ühekruviga cagede puhul on kaabits sageli pöörlemisele vastuvõtlik; SmallRig 5060 puhul seda probleemi ei ole. Silikoonpadi – kaamera kaitstud kriimustuste eest Kaabitsa sisemusel on ümbernäoline silikoonvooderdus – iga kaamera kaitsev pind on pehmendatud. See tähendab, et kaabits ei kriimusta Sony A6700 kere lakki ega tohutu korrosioonikindla katse ega intensiivsel kasutamisel. Oluline on see eriti kasutatud kaamera müügi puhul – kaabits jätab kere terveks. Hingedega akupesa luuk Aku vahetamiseks ei pea kaabitsast välja kruvisid keerama – hingedega luuk aku pesal juures avaneb otse. Lisaks pakub luuk haarates lisatuge väikesele sõrmele (little finger) – ergonoomiline käsihoid on tugevam. HDMI kaabliklamber – turvaline andmeedastus Kaasasolev HDMI kaabliklamber kinnitatakse kaabitsa vasakule küljele pöördkruviga – tööriistu ei ole vaja. Klamber hoiab HDMI kaabli fikseerituna ja takistab: Monteerimispunktid – mis tarvikuid saab kinnitada? 1/4″-20 keermepoldid (universaalne fotostandard) ARRI 3/8″-16 positsioneerimisneelikud Külm saabas (cold shoe) QD pistik + rihmaaugud Arca-Swiss integratsioon – DJI RS stabilisaatorite ühilduvus SmallRig 5060 integreeritud Arca-Swiss kiirkinnitusplaat ühildub: DJI Stabilisaator Ühilduvus DJI RS 2 ✓ DJI RSC 2 ✓ DJI RS 3 ✓ DJI RS 3 Pro ✓ DJI RS 4 ✓ DJI RS 4 Pro ✓ Lisaks Arca-Swissile toimib alumine 1/4″-20 keermepolt DJI RS Mini kiirkinnitusplaadiga. See tähendab, et Sony A6700 saab SmallRig 5060-ga ilma lisaadapteriteta kasutada pea kõiki kaasaegseid DJI RS stabilisaatoreid. Magnetkruvits – mugav kokkupanek Komplektis on magnetkruvits (double head wrench), mis hoiab kruvisid magnetjõuga. Kaabitsate M2.5 kruvisid on kohati keeruline tööriistu kasutades ligi pääseda – magnetiga peaga kruvits lahendab selle, hoides kruvi otsas kinni ka kitsastes kohtades. Kellele on SmallRig 5060 mõeldud? Sony A6700 videograafid ja dokfilmijad Sony A6700 on populaarne kompaktne hübriidkaamera, mida kasutatakse palju videograafias. SmallRig 5060 teeb sellest käeshoitava videosüsteemi – NATOreili kaudu saab lisada käepideme, külmjakialt mikrofoni ja HDMI klambri abil välise monitori ühendus jääb stabiilseks. DJI RS kasutajad Arca-Swiss integratsioon tähendab, et Sony A6700 + SmallRig 5060 läheb DJI RS stabilisaatorile ilma lisaadapterita. Kaabits kaitseb samal ajal kaamera keret gimbali kinnitusjõu eest. Filmiloojad mitmikseadistusega 1/4″ + ARRI 3/8″ + NATO + külm saabas + QD + rihmaaugud = üks kaabits katab kõik lisatarviku kinnituse vajadused. Eraldi adapteritest ei ole vaja – kogu süsteem ehitatakse ühe kaabitsa ümber. Komplektis sisaldub
SmallRig 5335 RF 20C – reguleeritav LED videovalgus professionaalide ja loovate sisuloojate jaoks SmallRig 5335 RF 20C on kompaktne ja tõhus LED videovalgus, mis ühendab endas 20 W pideva väljundi, viis LED-värvi, reguleeritava kiire ning sisseehitatud aku. See valgus on loodud professionaalsetele fotograafidele, videograafidele ja sisuloojatele, kes vajavad paindlikku, kergekaalulist ja usaldusväärset valgustit nii välivõtetel kui ka stuudios. Miks valida SmallRig RF 20C? Kujuta ette olukorda: oled pulmafotograaf, kes liigub saalide vahel kiiresti, või vlogija, kes filmib igapäevaelu erinevates kohtades. Sul on vaja valgustit, mis mahub kotti, süttib sekundiga ja annab professionaalse tulemuse. SmallRig RF 20C on täpselt selleks loodud. Valgisti kaalub vaid 520 g ja selle läbimõõt on 49 mm – see on väiksem ja kergem kui enamik võrreldavaid tooteid, kuid pakub samas 20 W püsivat väljundit. Tänu anodeeritud alumiiniumkorpusele on valgisti vastupidav ja ergonoomilise käepideme tõttu mugav kasutada ka pikema võttepäeva jooksul. Viis LED-värvi – loovad võimalused ühes seadmes RF 20C sisaldab viit eraldi LED-värvi: punane, 5600 K päevavalgusvalge (±400 K), lilla, oranž ja tsüaan. See tähendab, et sul ei ole vaja eraldi geele ega filtreid erinevate meeleolude loomiseks. Vajad portreele soojatoonilist äärtusvalgust? Vali oranž. Tahad anda animekostuumi fotosessiooni taustvalgusele müstilist nüanssi? Vali lilla. Värviedastuse indeks CRI Ra ≥ 97 ja TLCI ≥ 99 tagavad, et värvid on ka salvestises täpsed ja naturaalset – see on eriti oluline nahatoonide ja kangaste reprodutseerimisel. Reguleeritav kiir 24°–60° – parim juhitavus sarnaste toodete seas RF 20C esiküljel asuv lükatav tasanõgus-kumer lääts võimaldab kiirenurga reguleerimist 24°-st kuni 60°-ni. See vahemik on ligikaudu 40% laiem kui sarnastel konkurentide toodetel. Kitsas 24° kiir sobib dramaatilise spotivalguse loomiseks, samas kui 60° hajutab valguse pehmelt ja ühtlaselt suuremale pinnale. Prožektorrežiimis saavutab valgus 5400 lux @ 1 m kaugusel (5600 K juures). See on piisav täisvõimsaks kasutamiseks ka valgusrikkas keskkonnas. Gobo projektsioon – atmosfääri loomine on lihtne RF 20C komplektis on 20 mustergobot. Gobod on plaadid, mida asetatakse valgustisse ja mis projitseerivad seintele, põrandatele või inimestele huvitavaid valgusmustreid – näiteks aknaraame, puulehti, geomeetrilisi kujundeid või muud loovat dekori. Koos viie LED-värviga saab luua väga erinevaid meeleolusid. Eraldi müüdav SP Air projektsioonilääts laiendab võimalusi veelgi: 36° kiir, 4× optiline suurendus, fookusregulatsioon, magnetiline gobovahetus ja 10 metalgobot teravate projektsioonide jaoks. Sisemine aku ja USB-C kiirlaadimisega – töötab ka ilma vooluvõrguta Valgistisse on integreeritud kaks 21700 tüüpi 5000 mAh akut (kokku 7,4 V / 37 Wh). Täisvõimsusel töötab valgisti umbes 1,5 tundi, tüüpilisel kasutusrežiimil kuni 3 tundi. USB-C PD 36 W kiirlaadimisega saab aku täis umbes 1 tunni ja 40 minutiga. Voostuslaadimine (passthrough charging) võimaldab samal ajal laadida ja filmida – vooluvõrgu olemasolul ei pea akule üldse mõtlema. Turvaline kinnitus ja mitmekülgsed paigaldamisvõimalused RF 20C küljel on kaks 1/4″-20 keermega auku koos ARRI lokeerimistihvtidega, mis takistavad seadme pöörlemist kinnituspunktis ja tagavad püsiva kinnituse. Seadme põhjal on lisaks üks 1/4″-20 keermeava, mis võimaldab paigaldamist nurkade all – näiteks magic arm’ile, statiivile RA-S200 või muule standardsele lisaseadmele. Uuendatud kaitsemehhanism nõuab seadme sisselülitamiseks samaaegselt vajutamist ja pööramist, mis hoiab ära juhusliku aktiveerimise kotis transportimisel. Kellele sobib SmallRig RF 20C? Valgisti sobib hästi järgmistele kasutajatele:
RA-D55 parabolic softbox, with a diameter of 55cm, a depth of 37cm and a small body, is versatile, lightweight and portаble to use and can create a 3D light effect. SmallRig 3585 RA-D55 Parabolic Softbox Innovative quick release disk structure Adopt new generation of buckle structural design，you just gently lifting and pressing the buckle to finish the installation and disassemble. Even and ideal soft light With highly reflective coating + high-performance Oxford fabric double design, our softboxes are light-tight for a more uniform diffuse light and the natural transition of light effects. The outer layer is sturdy, durable, dustproof and slightly waterproof. The inner layer is smooth, with even light, original color temperature and CRI. Innovative external rib design The revolutionary design of the external ribs is to ensure that the inner is smooth, reduce light loss and achieve a brighter and softer light effect, as well as to avoid rib displacement and puncture of traditional inside ribs. With 16 military-grade high-temperature resistant steel ribs, lighter, tougher and more elastic than ordinary stainless ribs and 3 times easier to install, it can withstand tens of thousands of pressures without deformation. It has 3D and spherical illuminating surface and thoughtful silicone hand guard design prevents hand rubbing during disassembly. Fabric diffusion and grid With two strong and highly transparent softlight cloths and a 45° high-quality fabric honeycomb grid coming with the softbox, you can freely create a more delicate and textured soft light effect, to meet the needs of a variety of scenes. Standard Bowens mount The softbox adopts a Bowens mount, is fully compatible with various accessories with the Bowens mount on the market, and provides more lighting possibilities. Cylinder pouch for easy storage The softbox will come with a cylinder storage pouch having an open top for easy storage.
Designed for Nikon Z 8 and to protect the camera and attach accessories. The cage gives full access to buttons, card slots, battery door, and the flip screen. SmallRig 3982 Cage for Nikon Z 8 with MB-N12 Battery Grip It locks the camera via one bottom 1/4"-20 screw and one M2.5 screw on both sides, and have rubber pads which preventing scratches There is many accessory mounting points; 1/4"-20 & 3/8"-16 threaded hole and ARRI 3/8"-16 locating hole which can support SmallRig Top Handle 2165 & 1638, Side Handle 2093 & 2425, Monitor Mount 2903 & 2904 and Magic Arm 3875 Two cold shoe mounts fit a microphone and LED video light The Arca Swiss quick-release bottom plate and side plate enable horizontal and vertical shooting on tripods. The bottom Arca-Swiss quick-release plate also supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between handheld, gimbal, and tripod modes. At the front end, there are two 1/4"-20 threaded holes for SmallRig Dual 15mm Rod Clamp 942, matte box and lens support One 1/4"-20 locating hole for SmallRig Single Rod Clamp 3276 for follow focus. Besides, a magnetic double-ended wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 with MB-N12 Battery Grip Packaging includes: 1x Cage
Designed for Nikon Z 8 to facilitate a switch between horizontal and vertical modes and to improve grip experience. SmallRig 3942 L-Shape Mount Plate For Nikon Z 8 It locks the camera via one 1/4 "-20 screw at the bottom and one locating pin, with rub pads preventing scratches, and has a hinge arm at the battery door that fits the camera curve to enhance grip. There are multiple accessory mounts: An Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals 1/4"-20 & 3/8"-16 threaded holes at the bottom that support SmallRig Side Handle 2093 & 3847, Quick Release Plate 1280 Strap holes for SmallRig Hand Strap 3848 & 2456. The L-Bracket also features a QD mount to attach the QD strap buckle, 1/4"-20 threaded holes, suitable for SmallRig Cold Shoe Mount 2736 for the microphone, as well as a 23mm stretchable side plate that allows cables through in vertical shooting. Besides, a magnetic wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 Packaging includes: 1x L-Shape Mount Plate 1x Allen Wrench
Designed to protect the camera and attach accessories. The cage features rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. SmallRig 3940 Cage For Nikon Z 8 Locking the camera via one bottom 1/4 "-20 screw, one locating screw, and one side lock adapter on the right Among its accessory mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole support SmallRig Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. The side 1/4"-20 locating hole fits SmallRig Single Rod Clamp 3598 and Magic Arm 3873, and left NATO rail quickly connects SmallRig Side Handle 3847 & 4017. Besides, there are cold shoe mounts for the microphone and LED video light, strap holes for Smallrig Hand Strap 3848 & 2456, and QD mounts for the QD strap buckle. The bottom Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between gimbal, handheld, and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. Compatibility: Nikon Z 8 Package includes: 1x Cage
A professional light modifier. which allows the photographer to control light spread without changing its characteristics. SmallRig 4204 RA-BD08 Barndoors 8-leaf Each leave can be adjusted independently and rotated 360° to control and shape the light output. It comes standard with a 30-degree honeycomb grid, effectively narrowing beam spread. The color gel frame features four magnets for quick, stable installation of filters of different colors. Bowens mount ring adapter - Compatible with all Bowens mount COB lights Can also support mostly lights with 18cm standard reflectors for multi-scene lighting purpose. Highly compatible with most lights Bowens mount ring adapter for all Bowens mount light on the market. Supports 95% of 18cm standard reflectors available. Prevents light spill Longer and wider leaves effectively cut the beam to prevent spill light. Increased leaves better control and shape the light output. Meets your needs under different scenarios. Accurately adjustable for large-area lighting or local lighting. Axis damping allows leaves to flip smoothly and stop where you want them to. Includes various accessories for creative multiple-scene use The leaves together with color gel allows RGB lighting effect and prevents beam from spilling. Spread the 4 leaves 180° flat, and the color gel alone can achieve RGB lighting effect. Comes standard with a 30-degree honeycomb grid to narrow the beam spread. Bowens Mount Ring Adapter. Durable and user-friendly The Bowens mount ring adapter and leave fastener ensure firm and secure connection. 4magnets, works with color gel frame is powerful enough to hold filters of varied thickness and material The non-slip sponge cover feels comfortable while protecting fingers. The Honeycomb grid adapts powder spraying technology, which is anti-rust and high-temperature-resistant, also has a little label for quick removal and installation. The durable metalleaves also have black matte paint so that they do not rust And the nylon bracket makes it a lightweight item to be carried around. Compatibility: Bowens mount light Package includes: 1x 8-leaf Barndoor 1x Bowens Mount Ring Adapter 1x Honeycomb Grid 1x Color Gel Frame
Comes with a USB-C input/output port to be charged via a portable charger, power strip, car charger, or dedicated charger and with a USB-A output port to turn itself into a power bank, which can power up smartphone, iPad and other devices. SmallRig 4267 Camera Battery USB-C Rechargable NP-F970 Its USB-C port supports PD 3.0 protocol, making the battery full in just 6 hours. 10500mAh large capacity ensures equipment run for prolonged time Indicators help check battery status. Highly compatible and versatile, this battery also supports such rigs as camera, LED video light, monitor, slider, etc. It features fire-resistant, durable ABS and PC shell, frosted to have a delicate touch. Compatibility: Camera, LED video light, monitor, slider, etc. Certifications: This product system have passed the rechargeable battery certificationfor safty and efficiency: FCC / UL / UKCA / CE / RoHS / ISED Specifications: Battery Specification - 10500mAh 7.27V 76.3Wh Input Voltage - 8.4V Nominal Voltage - 7.27V Cell Nominal Capacity - 10500mAh Battery Nominal Capacity - 9970mAh Input Current: Slow Charging: 2100mA Fast Charging: 5250mA Maximum Input Current - 0.5C USB-C Input/Output - 5V/3A, 9V/2.22A, 12V/1.67A USB-C Protocol - PD3.0 / QC2.0 / QC3.0 / FCP / AFC / SCP / SSCP / PPS USB-A Output - 4.7~5.25V / 2.1A USB-C / USB-A Overcurrent Protection Range - 3.4~4A Maximum Output Current - 10A Over-discharge Protection Range - 12~18A Cut-off Voltage - 5.0V Operating Temperature - 0℃~45℃ Material(s) - PC+ABS Indicator Button: Short-press to check power status, when LED lights stay on for 30s and USB port supplies power. Double-press to turn it off. Status Indicator: Power status: 4 LED lights display power percentage—one for 1-25%, two for 25%-50%, three for 50%-75%, and four for 75%-100% Blinking light means low battery. Lights keep flashing when charging and stay on when discharging. Package includes: 1x NP-F970 USB-C Rechargeable Camera Battery 1x Battery Cover 1x USB-C to USB-C Charging Cable
