This heat shrink tube by Delock can be used on a variety of items that require a non-slip grip, e.g. tools, fitness equipment, tennis rackets or fishing rods. Under the effect of heat, the sleeve completely encloses the grip and shrinks. This protects the grip from the effects of the influence of weather and mechanical damage. Application of shrink tubes The heat shrink tube can be heated with a hot air gun; the hose shrinks to half of its original diameter when heated at a 2:1 shrinkage ratio. Specification • Length: ca. 1 m • Diameter: ca. 40 mm • Non-slip • X-pattern • Shrinkage ratio 2:1 • Shrinking temperature: 70 °C ~ 125 °C • Material: polyolefin • Colour: black Package content • Heat shrink tube
Professionaalne valik High Speed HDMI 2.0 kaabel äri- ja kõrgtehnoloogilistele AV- ja IT-seadmetele Toetab kuni 4096x2160 @ 60Hz ja HDTV eraldusvõime kuni 1080 pikslit Tugev PVC korpus, 24K kullatud pistikud ja kontaktid Kolmekordne varjestatud kaabel, korrosioonikindel konserveeritud vask 30AWG juhtmed HDMI 2.0 ühilduv: 3D, 4K, 18Gbps, HEC, ARC, CEC, Dolby True HD, DTS-HD Master Audio; HDMI ATC sertifitseeritud; Lindy poolt välja töötatud Lines-kaabliühenduse kontseptsiooni jaoks on Anthra Line HDMI-kaablid professionaalseks valikuks kõrgtehnoloogilistele ühendustele kaubanduslikes AV- ja IT-seadmetes. UHD eraldusvõime kuni 4K 4096x2160 @ 60Hz 4: 4: 4 8bit. Anthra Line HDMI kaablid on võimelised edastama 32 kanalit ja Dolby True HD. HDMI 2.0 spetsifikatsioon toetab 18Gbps kuni 5 m. Anthra Line HDMI kaablid on saadaval pikkusega 0,3m, 0,5m, 1m, 2m, 3m ja 5m
Wall charger Rebeltec H1045 PD45W type-C Nr katalogowy: REBELTEC H1045 45W charger Power Delivery 3.0 - a new standard for chargers. Thanks to the new variant of the USB Type-C port, it is now possible to transmit higher power via the most popular input standard on the market. Now it is possible to charge various devices faster: notebooks, smartphones, tablets, cameras, Bluetooth speakers and headphones, and many others. Thanks to the power of 45W, you can charge your devices even faster. The Rebeltec H1045 charger is equipped with Quick Charge (QC) technology - in Polish it simply means fast charging. It is based on increasing the voltage flowing to the device being charged to quickly raise the battery level to approximately 50-60%, and then slow it down. This second charging phase is intended to ensure the safety of the battery and the user and to avoid a potentially dangerous failure resulting from damaged cells or overheating of the phone. The REBELTEC H1045 charger is equipped with the PPS protocol - an abbreviation for Programmable Power Supply - a standard within USB Power Delivery (USB PD), which allows dynamic adjustment of the voltage and current supplied to the charged device. Traditional chargers often offer constant voltages (e.g. 5V, 9V, 12V, 20V). PPS, on the other hand, allows you to adjust the voltage in small steps, usually every 20mV, in the range from 3.3V to 21V. Almost every smartphone manufacturer has its own fast charging system dedicated to its own devices. That is why there is a need for some kind of unification of fast charging technology. In response, the PPS - Programmable Power Supply protocol was created. This is a charging scheme that can be used to charge a variety of devices regardless of brand. It introduced additional communication between the device and the charger during the entire charging process. This allows you to correct the value of not only the charging current, but also the voltage. Thanks to this, the battery is even more protected against too much energy and overheating. The charger comes with a 2m long USB-C to USB-C cable with a maximum bandwidth of 3A (60W). If you want to charge your Apple devices, just change the cable to USB-C to Lightning. Wall charger Rebeltec H1045 PD45W type-C Nr katalogowy: REBELTEC H1045 45W charger Power Delivery 3.0 - a new standard for chargers. Thanks to the new variant of the USB Type-C port, it is now possible to transmit higher power via the most popular input standard on the market. Now it is possible to charge various devices faster: notebooks, smartphones, tablets, cameras, Bluetooth speakers and headphones, and many others. Thanks to the power of 45W, you can charge your devices even faster. The Rebeltec H1045 charger is equipped with Quick Charge (QC) technology - in Polish it simply means fast charging. It is based on increasing the voltage flowing to the device being charged to quickly raise the battery level to approximately 50-60%, and then slow it down. This second charging phase is intended to ensure the safety of the battery and the user and to avoid a potentially dangerous failure resulting from damaged cells or overheating of the phone. The REBELTEC H1045 charger is equipped with the PPS protocol - an abbreviation for Programmable Power Supply - a standard within USB Power Delivery (USB PD), which allows dynamic adjustment of the voltage and current supplied to the charged device. Traditional chargers often offer constant voltages (e.g. 5V, 9V, 12V, 20V). PPS, on the other hand, allows you to adjust the voltage in small steps, usually every 20mV, in the range from 3.3V to 21V. Almost every smartphone manufacturer has its own fast charging system dedicated to its own devices. That is why there is a need for some kind of unification of fast charging technology. In response, the PPS - Programmable Power Supply protocol was created. This is a charging scheme that can be used to charge a variety of devices regardless of brand. It introduced additional communication between the device and the charger during the entire charging process. This allows you to correct the value of not only the charging current, but also the voltage. Thanks to this, the battery is even more protected against too much energy and overheating. The charger comes with a 2m long USB-C to USB-C cable with a maximum bandwidth of 3A (60W). If you want to charge your Apple devices, just change the cable to USB-C to Lightning. SPECIFICATION: Very fast wall charger using PD45W technology Maximum power 45W Compatible with technologies: PD3.0, PPS, QC3.0, ANF temperature controll one USB Type-C port intended for charging notebooks, phones, tablets, power banks, bluetooth speakers and headphones and other devices charged from USB Length of the included cable: 2 m Max cable power: 60W Mains input: 100-240V~50/60Hz 1.2A Power (PDO): 5V/3A 9V/3A 15V/3A 20V/2.25A Power(PPS): 3.3-11VV / 4.05A 3.3-16V / 2.8A 3.3-21V / 2.1A Wall charger Rebeltec H1045 PD45W type-C Nr katalogowy: REBELTEC H1045 45W charger Power Delivery 3.0 - a new standard for chargers. Thanks to the new variant of the USB Type-C port, it is now possible to transmit higher power via the most popular input standard on the market. Now it is possible to charge various devices faster: notebooks, smartphones, tablets, cameras, Bluetooth speakers and headphones, and many others. Thanks to the power of 45W, you can charge your devices even faster. The Rebeltec H1045 charger is equipped with Quick Charge (QC) technology - in Polish it simply means fast charging. It is based on increasing the voltage flowing to the device being charged to quickly raise the battery level to approximately 50-60%, and then slow it down. This second charging phase is intended to ensure the safety of the battery and the user and to avoid a potentially dangerous failure resulting from damaged cells or overheating of the phone. The REBELTEC H1045 charger is equipped with the PPS protocol - an abbreviation for Programmable Power Supply - a standard within USB Power Delivery (USB PD), which allows dynamic adjustment of the voltage and current supplied to the charged device. Traditional chargers often offer constant voltages (e.g. 5V, 9V, 12V, 20V). PPS, on the other hand, allows you to adjust the voltage in small steps, usually every 20mV, in the range from 3.3V to 21V. Almost every smartphone manufacturer has its own fast charging system dedicated to its own devices. That is why there is a need for some kind of unification of fast charging technology. In response, the PPS - Programmable Power Supply protocol was created. This is a charging scheme that can be used to charge a variety of devices regardless of brand. It introduced additional communication between the device and the charger during the entire charging process. This allows you to correct the value of not only the charging current, but also the voltage. Thanks to this, the battery is even more protected against too much energy and overheating. The charger comes with a 2m long USB-C to USB-C cable with a maximum bandwidth of 3A (60W). If you want to charge your Apple devices, just change the cable to USB-C to Lightning. SPECIFICATION: Very fast wall charger using PD45W technology Maximum power 45W Compatible with technologies: PD3.0, PPS, QC3.0, ANF temperature controll one USB Type-C port intended for charging notebooks, phones, tablets, power banks, bluetooth speakers and headphones and other devices charged from USB Length of the included cable: 2 m Max cable power: 60W Mains input: 100-240V~50/60Hz 1.2A Power (PDO): 5V/3A 9V/3A 15V/3A 20V/2.25A Power(PPS): 3.3-11VV / 4.05A 3.3-16V / 2.8A 3.3-21V / 2.1A net weight 70g EAN code 5902539600223 WARNINGS: Charger suitable for use with 100-240V ~ 50/60HzDo not attempt to open the charger housingAvoid exposing the charger to work in conditions of increased air humidityFor indoor use
