Otsing: 10GBase

CAT6A U/UTP • Painduvad pistikud • Kaitsmata võrgukaabel • 10GBASE-T (10 Gb/s kuni 100 m) • 0,5 m pikkus

CAT6A U/UTP • Painduvad pistikud • Kaitsmata võrgukaabel • 10GBASE-T (10 Gb/s kuni 100 m) • 0,25 m pikkus

CAT6A U/UTP • Painduvad pistikud • Kaitsmata võrukaabel • 10GBASE-T (10Gb/s kuni 100m) • 2m pikkus

CAT6A U/UTP • Painduvad pistikud • Kaitsmata võrukaabel • 10GBASE-T (10Gb/s kuni 100m) • 5m pikkus

CAT6A U/UTP • Painduvad pistikud • Kaitsmata võrukaabel • 10GBASE-T (10Gb/s kuni 100m) • 5m pikkus

CAT6A U/UTP • Painduvad pistikud • Kaitsmata võrukaabel • 10GBASE-T (10Gb/s kuni 100m) • 5m pikkus

CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.

CAT7 Flat Extension Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 Flat Network Extension Cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper. Network Extension Cable are excellent for extending of your LAN connection to your HDTV Blu Ray Player Home Theater XBox 360 PS3 etc. Used for network adapters hubs switches routers DSL/Cable modems patch panels and other twisted-pair applications.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Extension Cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.

CAT7 Flat Extension Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 Flat Network Extension Cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper. Network Extension Cable are excellent for extending of your LAN connection to your HDTV Blu Ray Player Home Theater XBox 360 PS3 etc. Used for network adapters hubs switches routers DSL/Cable modems patch panels and other twisted-pair applications.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Extension Cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.

CAT 6 pikenduskaabel, S/FTP (PiMF), mustvaskjuht (CU), halogeenivaba kaablikest (LSZH), paigaldusraamigaGoobay CAT-kaablid edastavad signaale tippkvaliteediga suure kiirusega, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, tugev kaabli mantel ja täpselt sobivad pistikud iseloomustavad Goobay ühenduskaableid ja pistikud. Goobay pakub alati täiuslikke tooteid teie võrguvajaduste rahuldamiseks - olenemata sellest, kas teie eesmärk on luua kodu- või ettevõtte võrk. Topeltvarjestatud LAN-kaabli pikendus RJ45-pistikutega võrgukomponentide ühendamiseksPaigaldusäärik 25 mm aukude vahedega kinnitamiseks nt pistikupesale, kaablikanalile või vastava väljalõikega korpuseleKvaliteetne vasekattega alumiiniumjuhe (CU) ja kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse.S/FTP üldvarjestus: üksikute juhtmepaaride alumiiniumfooliumiga varjestus (PiMF) ja kaabli mantli alumiiniumpunutisega varjestus.Painutuskaitse ja tugev mantel kaitsevad võrgukaablit tõhusalt purunemise eest.RJ45-pistiku lukustuskaitse takistab lukustuse kinnijäämist või katkemist, mis aitab tagada usaldusväärse internetiühenduse.Võrgupesa: paaride järjestus vastavalt EIA/TIA 568B, viigipunktide paigutus: 1:1, sobib 10 Gigabit Ethernet 10GBASE-T < 55 m, 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s.

Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10GBase-T.The TPE Jacket is a non-toxic alternative to PVC allowing it to be used in a variety of environments, as well as being more flexible than its counterpart with a flex rating of 10 million it has high impact and tear resistance making it a very durable jacket material.Cat.6A cable for operating frequencies up to 500 MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The TPE used as a sheath material provides increased flexibility and easy handling of cables.

TRENDnet’s hot-pluggable TEG-10GBS40, 10GBASE-ER SFP+ Single Mode LC Module, works with a MSA compliant SFP+ slot. This Single Mode transceiver spans distances up to 40 km (24.9 miles), comes with a LC duplex connector, and supports up to 10.3 Gbps networking throughput speeds. Digital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltage.Hot-Pluggable SFP+Hot-pluggable SFP+ transceiver works with a MSA compliant SFP+ slotFiber WavelengthCompatible with Single Mode 1550 nm transmissionsFiber DistanceSupports networking for distances up to 40 km (24.9 miles)Fiber PortLC-type duplex connectorDDM SupportDigital Diagnostics Monitoring (DDM) captures critical device parameters such as transmit/receive power, temperature, and voltagePower SupplySingle 3.3 volt power supplyOperating TemperatureRated for an operating temperature range of 0 to 70 °C (32 to 158 °F)StandardsCompliant with SFF-8431, SFF-8472, IEC-60825, FDA 21 CFR 1040.10/ 1040.11, and IEEE802.3ae 10GBASE-ER/EWAndmeedastuskiirus (maksimaalne)10000 Mbit/sLiidese tüüpSFP+Fiiberoptiline pistmikLCVõrgustandardidIEEE 802.3aeSFP-transiiveri tüüpERKiudjuhtme portide arv1Kaabli tüüpValgusjuheSingle-mode fiber (SMF) toetatudJahLainepikkus1550 nmHot-Plug tugiJahMaksimaalne ülekandekaugus40000 mVõimsustarve (tüüpiline)0,581 WKasutamistemperatuur (T-T)0 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)0 - 95 protsentiLaius14,8 mmSügavus56,5 mmKõrgus11,8 mmKaal22 gSertifikaatCE, FCC

Cisco 10GBASE-ER SFP Module, Enterprise-Class (SFP-10G-ER-S=)

Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500 MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.

MicroOptics - SFP+ transceiver module (equivalent to: Cisco SFP-10G-LR) - 10 GigE - 10GBase-LR

Powerful Layer 3 Routing Solution for All Long-Reach Networks PLANET SGS-6341-16S8C4XR is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance,&nbsp;Layer 3 static routing, RIP (Routing Information Protocol)&nbsp;and&nbsp;OSPF (Open Shortest Path First)&nbsp;with&nbsp;10Gbps uplink&nbsp;and multiple SFP fiber interfaces delivered in a rugged, strong case. The administrator can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the 10G network efficiently. Besides, with&nbsp;128Gbps switching fabric, the SGS-6341-16S8C4XR can handle extremely large amounts of data in a secure topology linking to backbone or high capacity servers for ISP and enterprise VoIP, video streaming, and multicast applications. High Performance 10Gbps Ethernet Capacity The four SFP+ slots built in the SGS-6341 series supports&nbsp;Dual-speed,&nbsp;10GBASE-SR/LR or 1000BASE-SX/LX. With 10Gbps uplink interfaces the SGS-6341 series boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 128Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. &nbsp; AC and DC Redundant Power to Ensure Continuous Operation The SGS-6341-16S8C4XR is equipped with one 100~240V AC power supply unit and one additional 36-75V DC power supply unit for redundant power supply. A redundant power system is also provided to enhance the reliability with either AC or DC power supply unit. The redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity.&nbsp; &nbsp; Central&nbsp;IP Stacking Management The SGS-6341 series supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. The IP Stacking technology groups PLANET SGS-6341 switch series together to enable centralized management through a single unit, regardless of physical location or switch type, as long as they are connected to the same local network. High Reliability Hardware Stacking Two of the 10G SFP+ ports are used&nbsp; to connect several SGS-6341 series&nbsp; build a virtually logical facility. The SGS-6341 series to gives the enterprises, service providers and telecoms flexible control over port density, uplinks and switch stack performance. The SGS-6341 series can connect as a ring for redundancy and ensures that data integrity is retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. &nbsp; &nbsp; Redundant Ring, Fast Recovery for Critical Network Applications The SGS-6341 Series supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T&nbsp;G.8032 ERPS&nbsp;(Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer&rsquo;s network to enhance system reliability and uptime in harsh environments. In a certain simple Ring network, the recovery time could be less than 50ms to quickly bring the network back to normal operation. &nbsp; Layer 3 Routing Support The SGS-6341 series enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, and the RIP or OSPF settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database. &nbsp; Strong Multicast&nbsp; The SGS-6341 series supports abundant multicast features. In Layer 2, it features IPv4 IGMPv1/v2/v3 snooping and IPv6 MLD v1/v2 snooping. In Layer 3 multicast protocols, it features IGMPv1/v2/v3 and DVMRP. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detect functions which make the SGS-6341 series great for any robust networking. &nbsp; Full IPv6 Support The SGS-6341 series provides&nbsp;IPv6 management&nbsp;and enterprise-level secure features such as&nbsp;SSH, ACL, WRR&nbsp;and&nbsp;RADIUS&nbsp;authentication. It thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don&rsquo;t need to replace the network facilities when the IPv6 FTTx edge network is built. &nbsp; Robust Layer 2 Features The SGS-6341 series can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the SGS-6341 series allows the operation of a high-speed trunk combined with multiple ports.&nbsp; It enables up to 128 groups for trunking with a maximum of 8 ports for each group.&nbsp; Excellent Layer 2 to Layer 4 Traffic Control The SGS-6341 series is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best in VoIP and video conferencing transmission.&nbsp; &nbsp; Powerful Security The SGS-6341 series supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6341 series also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users. &nbsp; Efficient and Secure Management For efficient management, the SGS-6341 Managed Gigabit Switch series is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6341 series offers an easy-to-use, platform-independent management and configuration facility. The SGS-6341 series supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software.&nbsp; For reducing product learning time, the SGS-6341 series offers Cisco-like command via Telnet or console port and customer doesn&rsquo;t need to learn new command from these switches. Moreover, the SGS-6341 series offers secure remote management by supporting SSH connection which encrypts the packet content at each session. &nbsp; Intelligent SFP Diagnosis Mechanism The SGS-6341-16S8C4XR supports&nbsp;SFP-DDM&nbsp;(Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. High Availability Mesh Networking Solution for Big Data System By means of improving the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the SGS-6341-16S8C4XR offers up to&nbsp;128Gbps&nbsp;data exchange speed via Optical Fiber interface and the transmission distance can be extended to 120km. The SGS-6341-16S8C4XR features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates&nbsp;IEEE 802.1s MSTP (Multiple Spanning Tree Protocol, spanning tree by VLAN)&nbsp;into customer&rsquo;s automation network to enhance system reliability and uptime. The SGS-6341-16S8C4XR is the ideal solution for data centers, service providers and telecoms to build redundant connection and establish high bandwidth for Big Data server farm. Excellent Solution to Core/Data Center Security and QoS Switch The SGS-6341-16S8C4XR performs 128 Gigabits per second non-blocking switch fabric so it can easily provide a local 10Gbps high bandwidth Ethernet network for the backbone of your department. With the four built-in SFP+ ports, the SGS-6341-16S8C4XR provides the uplink to the backbone network through the 10G Ethernet LR/SR SFP+ modules. It further improves the network efficiency and protects the network clients by offering the security and QoS features. Layer 3 VLAN Routing With the built-in robust Layer 3 traffic routing protocols, the SGS-6341-16S8C4XR ensures reliable routing between VLANs and network segments. The routing protocols can be applied via VLAN interface. The SGS-6341-16S8C4XR is certainly a cost-effective and ideal solution for enterprises. Physical Ports 24 100/1000BASE-X mini-GBIC/SFP&nbsp;slots Eight 10/100/1000BASE-T RJ45&nbsp;copper ports, shared with Port-1 to Port-8 4 10GBASE-SR/LR SFP+&nbsp;slots, compatible with 1000BASE-SX/LX/BX SFP RJ45 to DB9 console interface for switch basic management and setup 1 USB2.0 interface for configuration and firmware storage &nbsp; Stacking Features IP Stacking -&nbsp;Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces -&nbsp;Single IP address management, supporting up to 24 IP units stacked together Hardware Stacking - Virtualized multiple SGS-6341 series switches into one logical device - Connects with stack member via assigned 10G SFP+ interfaces - Single IP address stack management, supporting up to 4 hardware units stacked together - Stacking architecture supports redundancy Ring mode &nbsp; IP Routing Features IP routing protocol supports&nbsp;RIPv1/v2,&nbsp;RIPng,&nbsp;OSPFv2/v3,&nbsp;BGP4/4+ Routing interface provides per VLAN routing mode&nbsp; VRRPv1/v3&nbsp;protocol for redundant routing deployment&nbsp; Supports route redistribution Supports hardware-based wire-speed VLAN routing &nbsp; Multicast Routing Features Supports PIM-DM (Protocol Independent Multicast &ndash; Dense Mode) and PIM-SM (Protocol Independent Multicast &ndash; Sparse Mode) and PIM-SSM (Protocol Independent Multicast &ndash; Source Specific Multicast) Supports DVMRP (Distance Vector Multicast Routing Protocol) Supports IGMP v1/v2/v3 and MLD v1/v2 &nbsp; Layer 2 Features Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports Auto-MDI/MDI-X detection on each RJ45 port Prevents packet loss flow control -&nbsp;IEEE 802.3x pause frame flow control in full-duplex mode -&nbsp;Back pressure flow control in half-duplex mode High performance Store-and-Forward architecture, broadcast storm control, port loopback detect 16K MAC address table, automatic source address learning and aging Supports VLAN - IEEE 802.1Q tag-based VLAN - GVRP for dynamic VLAN management - Up to 4K VLANs groups, out of 4041 VLAN IDs - Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported - Private VLAN Edge (PVE) supported - GVRP protocol for Management VLAN -&nbsp;Protocol-based VLAN - MAC-based VLAN - IP subnet VLAN Supports Link Aggregation - Maximum 128 trunk groups, up to 8 ports per trunk group -&nbsp;IEEE 802.3ad LACP (Link Aggregation Control Protocol) -&nbsp;Cisco ether-channel (static trunk) Supports Spanning Tree Protocol -&nbsp;STP, IEEE 802.1D (Classic Spanning Tree Protocol) -&nbsp;RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol) -&nbsp;MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN) - Supports BPDU &amp; root guard Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many) Provides port mirror (many-to-1) Supports G.8032 ERPS (Ethernet Ring Protection Switching) &nbsp; Quality of Service 8 priority queues on all switch ports Support for strict priority and WRR (Weighted Round Robin) CoS policies Traffic classification -&nbsp;IEEE 802.1p CoS/ToS -&nbsp;IPv4/IPv6 DSCP -&nbsp;Port-based WRR Strict priority and WRR CoS policies &nbsp; Multicast Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 and v2 snooping Querier mode support Supports Multicast VLAN Register (MVR) &nbsp; Security IEEE 802.1x port-based network access authentication MAC-based network access authentication&nbsp; Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6 TACACS+ login users access authentication IP-based Access Control List (ACL) MAC-based Access Control List Supports DHCP snooping Supports ARP inspection IP Source Guard&nbsp;prevents IP spoofing attacks Dynamic ARP Inspection&nbsp;discards ARP packets with invalid MAC address to IP address binding &nbsp; Management Management IP for IPv4 and IPv6 Switch Management Interface -&nbsp;Console/Telnet Command Line Interface&nbsp; -&nbsp;Web switch management -&nbsp;SNMP v1, v2c, and v3 switch management -&nbsp;SSH/SSL secure access BOOTP and DHCP for IP address assignment Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6 SNTP (Simple Network Time Protocol) for IPv4 and IPv6 User privilege levels control Syslog server for IPv4 and IPv6 Supports DDM Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events) Supports sFlow Supports ULDP Supports ULPP (Uplink Protection Protocol) Supports ULSM (Uplink State Monitor protocol) Supports LLDP/LLDP MED Supports DHCP Option82, Option37/38 Supports ping, trace route function for IPv4 and IPv6

CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.

DAC kaabel ühilduv HP JD095C - STARTECH - 65 cm - Twi-aksiaalne - 10GBase - Passiivne

CAT6A U/UTP • 2 m • Kaabli läbimõõt 3,2 mm • 10GBASE-T (10 Gb/s kuni 100 m) • Viieaastane garantii

CAT6A U/UTP • 5 m • Kaabli läbimõõt 3,2 mm • 10GBASE-T (10 Gb/s kuni 100 m) • Viieaastane garantii

CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.

CAT 6 pikenduskaabel, S/FTP (PiMF), mustvaskjuht (CU), halogeenivaba kaablikest (LSZH), paigaldusraamigaGoobay CAT-kaablid edastavad signaale tippkvaliteediga suure kiirusega, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, tugev kaabli mantel ja täpselt sobivad pistikud iseloomustavad Goobay ühenduskaableid ja pistikud. Goobay pakub alati täiuslikke tooteid teie võrguvajaduste rahuldamiseks - olenemata sellest, kas teie eesmärk on luua kodu- või ettevõtte võrk. Topeltvarjestatud LAN-kaabli pikendus RJ45-pistikutega võrgukomponentide ühendamiseksPaigaldusäärik 25 mm aukude vahedega kinnitamiseks nt pistikupesale, kaablikanalile või vastava väljalõikega korpuseleKvaliteetne vasekattega alumiiniumjuhe (CU) ja kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse.S/FTP üldvarjestus: üksikute juhtmepaaride alumiiniumfooliumiga varjestus (PiMF) ja kaabli mantli alumiiniumpunutisega varjestus.Painutuskaitse ja tugev mantel kaitsevad võrgukaablit tõhusalt purunemise eest.RJ45-pistiku lukustuskaitse takistab lukustuse kinnijäämist või katkemist, mis aitab tagada usaldusväärse internetiühenduse.Võrgupesa: paaride järjestus vastavalt EIA/TIA 568B, viigipunktide paigutus: 1:1, sobib 10 Gigabit Ethernet 10GBASE-T < 55 m, 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s.

Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500 MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.

Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10GBase-T.The TPE Jacket is a non-toxic alternative to PVC allowing it to be used in a variety of environments, as well as being more flexible than its counterpart with a flex rating of 10 million it has high impact and tear resistance making it a very durable jacket material.Cat.6A cable for operating frequencies up to 500 MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The TPE used as a sheath material provides increased flexibility and easy handling of cables.

Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10GBase-T.The TPE Jacket is a non-toxic alternative to PVC allowing it to be used in a variety of environments, as well as being more flexible than its counterpart with a flex rating of 10 million it has high impact and tear resistance making it a very durable jacket material.Cat.6A cable for operating frequencies up to 500MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The TPE used as a sheath material provides increased flexibility and easy handling of cables.

Eriti lühikesed pistikud, puhas vaskjuht (CU), LSZH, TPE kestaga, AWG 32Omaette CATegooria: Ülilihtsad CAT-kaablid koos eriti lühikeste pistikutega vähendavad drastiliselt materjali mahtu serverikappides ja ühenduspaneelides - see parandab oluliselt õhuringlust ja vähendab soojuse tekkimist võrreldes tavaliste kaablite puhul. Lisaks sellele tagavad pehme TPE-kest ja õhukesed vaskjuhtmed erilise paindlikkuse ja materjalitõhususe, mis muudavad selle kaablipõlvkonna täiuslikuks võrgukaaslaseks.Üliõhuke LAN-kaabel eriti lühikeste RJ45-pistikutega, mis vähendab kaabli mahtu serverikapis või patch-paneelis, mille tulemuseks on optimeeritud õhuringlus.Ohutu ja paindlik: Ilma keerdpaari varjestuseta ja vähese suitsuga, halogeenivaba TPE-kestaga, mis tagab eriti väikese paindumisraadiuse ja suure paindlikkuse.AWG 32 ja 3,8 mm välisläbimõõduga kaabel on ülimalt õhuke, kuid sama võimas kui tavaline CAT-kaabel.CAT 6A võrgukaabel sobib ideaalselt selliste kiirete ühenduste jaoks nagu 10 Gigabit Ethernet 10GBASE-T, 100BASE-TX, 1000BASE-T ja 10/100/1000/10000 Mbit/s.RJ45 kaabel sobib Power over Ethernet (PoE, PoE+) ja CAT 6A testitud (tarnitakse koos individuaalse mõõtmisprotokolliga).Kvaliteetne vaskjuht (CU) ja kullatud pistikukontaktid tagavad madala ülekandetakistuse ja hoiavad ära korrosiooniKompaktne murdumiskaitse takistab tõhusalt kaabli purunemist ja tagab Ethernet-kaabli pika kasutusajaTooted on märgistatud ainult pabersildiga, kilekotte ja plastist kaablisidemeid ei kasutata.Vastavad kehtivatele IEC ja ISO standarditele:IEC 60332-1: tulekindlusIEC 61034: vähese suitsugaIEC 60754-2: HalogeenivabaISO 11801: Fluke'i kanalitest: kanal + PoE

Eriti lühikesed pistikud, puhas vaskjuht (CU), LSZH, TPE kestaga, AWG 32Omaette CATegooria: Ülilihtsad CAT-kaablid koos eriti lühikeste pistikutega vähendavad drastiliselt materjali mahtu serverikappides ja ühenduspaneelides - see parandab oluliselt õhuringlust ja vähendab soojuse tekkimist võrreldes tavaliste kaablite puhul. Lisaks sellele tagavad pehme TPE-kest ja õhukesed vaskjuhtmed erilise paindlikkuse ja materjalitõhususe, mis muudavad selle kaablipõlvkonna täiuslikuks võrgukaaslaseks.Üliõhuke LAN-kaabel eriti lühikeste RJ45-pistikutega, mis vähendab kaabli mahtu serverikapis või patch-paneelis, mille tulemuseks on optimeeritud õhuringlus.Ohutu ja paindlik: Ilma keerdpaari varjestuseta ja vähese suitsuga, halogeenivaba TPE-kestaga, mis tagab eriti väikese paindumisraadiuse ja suure paindlikkuse.AWG 32 ja 3,8 mm välisläbimõõduga kaabel on ülimalt õhuke, kuid sama võimas kui tavaline CAT-kaabel.CAT 6A võrgukaabel sobib ideaalselt selliste kiirete ühenduste jaoks nagu 10 Gigabit Ethernet 10GBASE-T, 100BASE-TX, 1000BASE-T ja 10/100/1000/10000 Mbit/s.RJ45 kaabel sobib Power over Ethernet (PoE, PoE+) ja CAT 6A testitud (tarnitakse koos individuaalse mõõtmisprotokolliga).Kvaliteetne vaskjuht (CU) ja kullatud pistikukontaktid tagavad madala ülekandetakistuse ja hoiavad ära korrosiooniKompaktne murdumiskaitse takistab tõhusalt kaabli purunemist ja tagab Ethernet-kaabli pika kasutusajaTooted on märgistatud ainult pabersildiga, kilekotte ja plastist kaablisidemeid ei kasutata.Vastavad kehtivatele IEC ja ISO standarditele:IEC 60332-1: tulekindlusIEC 61034: vähese suitsugaIEC 60754-2: HalogeenivabaISO 11801: Fluke'i kanalitest: kanal + PoE

Cat.6A S/FTP network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10GBase-T.The TPE Jacket is a non-toxic alternative to PVC allowing it to be used in a variety of environments, as well as being more flexible than its counterpart with a flex rating of 10 million it has high impact and tear resistance making it a very durable jacket material.Cat.6A cable for operating frequencies up to 500MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The TPE used as a sheath material provides increased flexibility and easy handling of cables.

startech hp j9151e comp - sfp+ moodul - sm edastaja mustRouter, Wifi, Võrk 10 Gbps | Ühesuunaline | LC | 10 Km | Garantii kuni

Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10 GBase-T. Cat.6A cable, shielded with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables meet the requirements of 10 Gigabit Ethernet (10GBaseT) with an operating frequency of up to 500 MHz. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The halogen-free sheath material of the LSZH cable makes the product suitable for use in public spaces with its low smoke emission and elimination of toxic halogen emissions.

Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

StarTech SFP10GSRSST, SFP

CAT8 Flat Patch CableVention CAT8 Flat Patch Cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 30 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. CAT8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 Flat Patch Cable provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this CAT8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief.Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of CAT6A cable or CAT7 cable.

Câble réseau à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, LSZHConnecteur anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal stableGarantie 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le matériau de gaine sans halogène du câble LSZH rend le produit utilisable dans les lieux publics grâce à sa faible émission de fumée et à la suppression des émissions toxiques d'halogène.Couleurs disponibles: Noir, Bleu, Gris, Rouge, Blanc.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.

Cat.6A S/FTP network cable with support for bandwidth up to 500 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 10GBase-T.The TPE Jacket is a non-toxic alternative to PVC allowing it to be used in a variety of environments, as well as being more flexible than its counterpart with a flex rating of 10 million it has high impact and tear resistance making it a very durable jacket material.Cat.6A cable for operating frequencies up to 500 MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6A cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. The TPE used as a sheath material provides increased flexibility and easy handling of cables.