The HEATKILLER® V eBC backplate is a useful addition to the graphics card coolers of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and mechanical stability. This is made possible by the use of solid black anodized aluminum. The milled logos and indirect lighting are also eye-catchers. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the delivery. Spacers (electrically insulating) attached to the back of the backplate ensure easy installation on the graphics card. The included mounting material is optimized for use with a water cooler from the HEATKILLER® V series. Technical data: Material: anodized aluminum Dimensions: (L x W x H): Weight: 150g Compatibility: EVGA GeForce RTX 3080 FTW3 EVGA GeForce RTX 3080Ti FTW3 EVGA GeForce RTX 3090 FTW3 See also http://gpu.watercool.de for further information Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 EVGA FTW3 - Black 1x mounting material
The HEATKILLER® V eBC backplate is a useful addition to the HEATKILLER® V series graphics card coolers. Mounted on the back of the graphics card, it improves cooling performance and mechanical stability. This is made possible by the use of solid black anodized aluminum. The milled logos and indirect lighting are also discreet eye-catchers. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the delivery. Spacers (electrically insulating) attached to the back of the backplate ensure easy installation on the graphics card. The included mounting material is optimized for use with a HEATKILLER® V series water cooler. Technical data: Material: nickel-plated aluminum, insulated Dimensions: (L x W x H): Weight: 150g Compatibility: EVGA GeForce RTX 3080 FTW3 EVGA GeForce RTX 3090 FTW3 EVGA GeForce RTX 3080Ti FTW3 See also http://gpu.watercool.de for further information Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 EVGA FTW3 - Black 1x mounting material
【Cutting Edge 16K DisplayPort Cable】UGREEN16K DisplayPort cable 2.1 supports high resolutions 16K@60Hz, 8K@240Hz, 4K@240Hz. And backward compatible with Display Port 1.4 1.3, 1.2. Single-screen video output of 16K@60Hz (DSC 1.2a), and dual-screen supported. The DP to DP cable also supports HDR, HDCP 2.2, FEC forward error correction and UHBR10 which guarantee your immersive viewing experience. (Note: 20-pin is disabled with no power. No need to worry about the 20-pin issues.) 【VESA Certified 80Gbps DP Cable 2.1】This Display Port 2.1/2.0 cable features an unprecedented bandwidth of 80Gbps, nearly 3 times what was available in the previous DP 1.4 spec. Stable and high-speed transmission without signal loss. The DisplayPort cable also backward compatible with previous DP 1.4 and DP 1.2 standards. The monitor cable meets the VESA Standard and supports 3D&HDR and Dolby&eARC to provide you with amazing sound and image quality. 【Optimized for Game Enthusiasts】The DP cable 2.1 is highly recommended for game setups as it works well with game monitors and graphics cards, delivering high-quality video and audio signals with no lag or interference. It supports FreeSync and G-Sync, which are essential for gaming. You can easily connect multiple monitors with Multi-Stream Transport (MST). Variable refresh rate (VRR) and auto low latency mode (ALLM) bring you smoother game experience especially in FPS, 3A and MOBA games. 【Ultra Durability】UGREEN DisplayPort cable port with no buckle design can prevent accidental damage. DP cable 2.1 is made of 28AWG tinned copper and tinplate which features triple shielding and resistance with EMI. Aluminum alloy housing is resistant to rust and can accelerate heat dissipation. The Display Port cord has a strong nylon braided jacket, which is 10X more durable than PVC. It can provide higher connectivity and longer service life for better signal transmission. 【Wide Compatibility】UGREEN 16K@60Hz DisplayPort to DisplayPort cable is compatible with all devices with DP ports, compatible with Nvidia RTX 3070/RTX 3080/RTX 3090/RTX 4090/RTX 4080ti/RTX 4070ti graphics cards, and AMD Radeon RX 6800 XT/RX 6900 XT/RX 7900 XT graphics cards, and Odyssey G8/G9, Ben Q, Alienware, LG Ultragear monitors, HDTV, Fire TV, computer and others. Support DP, DP++ modes, backward compatible 2.0/1.4/1.3/1.2 DisplayPort 2.1 Reinforced Joint Bare Copper Nylon Braided
Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
EK-Quantum Vector Strix RTX 3080/3090 Backplate - Nickel is a CNC-milled backplate made of nickel-plated aluminium that fits all EK-Quantum Vector Strix RTX 3070/3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector Strix RTX 3070/3080/3090 back plate - nickel Assembly mechanism Thermal pads
Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung
The Alphacool ES GPX Copper/Carbon water cooler with backplate was developed for the Alphacool Enterprise Series. Due to the positioning of the connections, the hosing of the cooler in the server rack is significantly simplified. The top of the cooler is made of carbon. This makes the water cooler lighter compared to Alphacool's Eisblocks with acetal or acrylic tops. Thanks to the compact design, only 1 slot is needed to mount the cooler in the server rack instead of 1.5 slots as before. This additional space saving is one more argument for using the ES GPX Copper/Carbon graphics card water cooler. More performance! Alphacool manages to position the cooler as close as possible to the components to be cooled. For this purpose, the heat conducting pads used are reduced to a thickness of 1mm. The maximum possible reduction in the thickness of the copper block and the optimization of the water flow inside the cooler allow all important components such as GPU, voltage converters and VRAMs to be cooled by water much better and more effectively. All of this provides a significant increase in cooling performance. Connections on the back? In order to save space in the width and height during installation, the water input and output have been moved to the back of the cooling block. This positioning of the connections makes hosing much easier. It enables easy integration of the GPU cooler into the water circuit even in the tightest server housings. Copper or aluminum? Alphacool uses only copper for all water-bearing parts. Copper has almost twice the thermal conductivity of aluminum and is therefore clearly the better choice of material for water cooling. The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Thermal paste & thermal pads The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive thermal paste is particularly well suited for high contact pressures, but can still be perfectly applied due to its viscosity of 850000 TF. For the thermal pads, Alphacool uses soft pads that fit perfectly to the components to be cooled and are very durable. The 2mm and 3mm thick pads have a thermal conductivity of 3 W/mk. The 1mm thick pads can dissipate 7 W/mk of heat. Discreet appearance The matte carbon finish gives the cooler a noble appearance. This makes it additionally interesting for private users who want to do without aRGB lighting. Compatibility: - Gainward GeForce RTX 3080 Ti 12GB Phoenix - Gainward RTX 3080 Phoenix - Gainward RTX 3080 Phoenix GS - Gainward RTX 3090 Phoenix - Gainward RTX 3090 Phoenix GS - INNO3D GEFORCE RTX 3080 TI ICHILL X4 - INNO3D GEFORCE RTX 3080 TI ICHILL FROSTBITE - INNO3D GEFORCE RTX 3080 TI ICHILL X3 - INNO3D GEFORCE RTX 3080 TI X3 - INNO3D GEFORCE RTX 3080 TI X3 OC - Inno3D GeForce RTX 3080 iChill X3/X4 10240 MB GDDR6X - Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X - INNO3D GEFORCE RTX 3080 12GB ICHILL FROSTBITE LHR - INNO3D GEFORCE RTX 3080 12GB X3 OC LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL X3/X4 LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL BLACK LHR - Inno3D GeForce RTX 3090 iChill X3/X4, 24576 MB GDDR6X - Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X - Palit GeForce RTX 3080 Ti GamingPro - Palit GeForce RTX™ 3080 GamingPro - Palit GeForce RTX™ 3080 GamingPro OC - Palit GeForce RTX™ 3090 GamingPro - Palit GeForce RTX™ 3090 GamingPro OC - Zotac Gaming GeForce RTX 3080 Ti AMP Holo - Zotac GeForce RTX 3080 Ti AMP HoloBlack - Zotac Gaming GeForce RTX 3080 Ti Trinity - Zotac Gaming GeForce RTX 3080 Ti Trinity OC - Zotac GAMING GeForce RTX 3080 Trinity - Zotac Gaming GeForce RTX 3080 Trinity OC - Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X - Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP - Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP - Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) - PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X Technical data cooler L x W x H 247,30 x 95,35 x 23,08mm Material cooler chrome-plated copper Material cooler top carbon Threads 2 x G1/4" Thickness cooling fins 0,6mm Maximum working temperature 60 °C Pressure tested 0,8 Bar Technical data backplate L x W x H 237,20 x 95,35 x 6mm Material aluminium Color black
Backplate für GPU-Wasserkühlung, für EK-Quantum Vector FTW3 RTX 3080/3090, aus POM Acetal, bietet erhöhte Stabilität, mit Wärmeleitpads, für aktive Kühlung des PCBs
Backplate mit aktiver Kühlung von EK Water Blocks, für MSI Trio und Suprim 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
EK-Quantum Vector FE RTX 3080 Backplate - Black is a CNC machined retention backplate made from black anodized aluminum for the EK-Quantum Vector FE RTX 3080 - Special Edition water block. The backplate covers the backside of the graphics card's PCB and serves as an aesthetic add-on. It provides additional passive cooling for the GPU core and rear of the printed circuit board VRM section. Due to the small size of both the card and the water block, the backplate boasts a ribbed design for additional passive cooling power. Enclosed EK-Quantum Vector FE RTX 3080 Backplate - Black Mounting screws Thermal pads
The Alphacool Aurora Acryl GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 17 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Plexi GPX Eisblock.More Performance!During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the chrome-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance.New Design!The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity.Copper or Aluminium? Alphacool uses only copper for all water-bearing parts. Copper has almost twice the thermal conductivity of aluminum and is therefore clearly the better choice of material for water cooling. The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating.Is There Anything Else New?The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler.The Alphacool Aurora GPX-N RTX 3080/3090 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Compatibility:RTX 3080 TIMSI GeForce RTX 3080 Ti Suprim XMSI GeForce RTX 3080 Ti Gaming X Trio 12GRTX 3080MSI GeForce RTX 3080 Gaming X Trio 10G, 10GB GDDR6X, HDMI, 3x DPMSI GeForce RTX 3080 Gaming Z Trio 10G, 10GB GDDR6X, HDMI, 3x DP (V389-045R)MSI GeForce RTX 3080 Gaming Z Trio 12G LHR, 12GB GDDR6X, HDMI, 3x DP (V389-402R)MSI GeForce RTX 3080 Suprim X 10G, 10GB GDDR6X, HDMI, 3x DPMSI GeForce RTX 3080 Suprim X 12G LHR, 12GB GDDR6X, HDMI, 3x DPRTX 3090MSI GeForce RTX 3090 Gaming X Trio, 24GB GDDR6X, HDMI, 3x DPMSI GeForce RTX 3090 Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP Technical data coolerL x W x H295 x 152 x 25 mmMaterial coolerchrome-plated copperMaterial cooler topacrylicThreads4 x G1/4Thickness cooling fins0,6 mmMaximum working temperature60 °CIlluminationDigital RGB LEDsPower connector Digital RGB LEDs3-Pin JSTPower Digital RGB LEDs5VNumber of digital aRGB LEDs12Technical data backplateL x W x H295 x 125,75 x 6 mmMaterialaluminiumColorblack
Compatibility: - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 Suprim X with backplate (article number: 11938) Technical data L x W x H: 295 x 127,25 x 13,3 mm Material backplate: copper, nickel-plated Material cooler: acrylic Threads Water cooling: 2x G1/4" | 2x 5/3mm tube connection Illumination: 6x digital addressable RGB LEDs Power connector: digital aRGB LEDs 3-pin JST (male & female switch) Power: digital aRGB LEDs 5V Maximum working temperature: 60 °C Pressure tested: 0,8 Bar Weight: 1054 g
The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance.Connection optionsThere are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!)The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design.Brilliant illuminationSix addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility:- Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF with backplate (article number: 11967) Technical dataL x W x H295 x 125,25 x 13,3 mmMaterial backplatecopper, nickel-platedMaterial cooleracrylicThreads Water cooling2x G1/4" | 2x 5/3mm tube connectionIllumination6x digital addressable RGB LEDsPower connector digital aRGB LEDs3-pin JST (male & female switch)Power digital aRGB LEDs5VMaximum working temperature60 °CPressure tested0,8 BarWeight1013 g
The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance.Connection optionsThere are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!)The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design.Brilliant illuminationSix addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility:- Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 TI Founders Edition with Backplate (article number: 13056) Technical dataL x W x H220,5 x 121,4 x 13,3 mmMaterial backplatecopper, nickel-platedMaterial cooleracrylicThreads Water cooling2x G1/4" | 2x 5/3mm tube connectionIllumination6x digital addressable RGB LEDsPower connector digital aRGB LEDs3-pin JST (male & female switch)Power digital aRGB LEDs5VMaximum working temperature60 °CPressure tested0,8 BarWeight753 g
EK-Quantum Vector RTX 3080/3090 Backplate - Black is a CNC-milled backplate made of black anodised aluminium that fits all EK-Quantum Vector RTX 3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector RTX 3080/3090 rear panel - Black Assembly mechanism Thermal pads
EK-Quantum Vector Strix RTX 3080/3090 Backplate - Black is a CNC-milled backplate made of black anodised aluminium that fits all EK-Quantum Vector Strix RTX 3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector Strix RTX 3070/3080/3090 back plate - Black Assembly mechanism Thermal pads
The Barrow LRC2.0 full coverage GPU Water Block for Colorful BATTLEAX 3090 Aurora is a complete GPU cooler. It covers and cools all important components such as GPU RAM, capacitors and GPU processor. This cooler was specially developed for the Nvidia Colorful BATTLEAX 3090. The cooler plate is made of nickel-plated copper and is equipped with special micro cooling channels for optimal cooling. The lid with the integrated RGB lighting is made of acrylic glass. The RGB's are controlled via a 4Pin connector on the mainboard. Compatibility Colorful BATTLEAX RTX 3090 24G Colorful BATTLEAX RTX 3080 10G Technical Data Material: Nickel-Plated Copper (base) / Acrylic (cover) Dimensions: 250 x 122,3 x 20,4mm Colour: Silver / Transparent Cover: complete GPU cooler Threads: 2x G1/4" female Lighting: integrated RGB lighting Connections: 4Pin 5V RGB lighting Scope of Delivery Barrow LRC2.0 full coverage GPU Water Block for Colorful BATTLEAX 3090 Aurora
The Barrow LRC2.0 full coverage GPU Water Block for Colorful Vulcan 3090 Aurora is a complete GPU cooler. It covers and cools all important components such as GPU RAM, capacitors and GPU processor. This cooler was specially developed for the Nvidia Colorful Vulcan 3090. The cooler plate is made of nickel-plated copper and is equipped with special micro cooling channels for optimal cooling. The lid with the integrated RGB lighting is made of acrylic glass. The RGB's are controlled via a 4Pin connector on the mainboard. Compatibility Colorful iGame RTX 3080 Vulcan X OC 10G Colorful iGame RTX 3080 Vulcan OC 10G Colorful iGame RTX 3080 Vulcan 10G Colorful iGame RTX 3080 Neptune OC 10G Colorful iGame RTX 3080 Neptune 10G Technical Data Material: Nickel-Plated Copper (base), Acrylic Glass (cover) Dimensions: 296,2 x 145,5 x 20,4mm Colour: Silver / Transparent Cover: complete GPU cooler Lighting: integrated RGB lighting Threads: 2x G1/4" internal thread Connections: 4Pin 5V RGB lighting Scope of Delivery Barrow LRC2.0 full coverage GPU Water Block for Colorful Vulcan 3090 Aurora
The EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Nickel Backplate is made of aluminum. This ensures improved cooling. Technical specifications: Material: aluminum Silver Weight: Dimensions: 307.62 x 128 x 5.2mm Scope of delivery: EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Nickel
