Otsing: Radeon RX 6800

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H 2 O and offers a max. air flow of 119.8m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 277 x 152 x 46 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H 2 O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Compatibility list: - ASUS TUF Gaming Radeon RX 6900 XT OC, 16GB - ASUS ROG Strix Radeon RX 6800 XT OC, 16GB GDDR6, HDMI, 3x DP - ASUS ROG Strix Radeon RX 6800 OC, 16GB GDDR6, HDMI, 3x DP - ASUS TUF Gaming Radeon RX 6800 XT OC, 16GB GDDR6, HDMI, 3x DP - ASUS TUF Gaming Radeon RX 6800 OC, 16GB GDDR6, HDMI, 3x DP Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.

The Alphacool Aurora Acryl GPX-A 6800(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A 6800(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-A 6800(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A 6800(XT) Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A 6800(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A 6800(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 130 x 262,5 x 24,5 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - AMD Radeon 6800 Reference Design - AMD Radeon 6800 XT Reference Design - AMD Radeon 6900 XT Reference Design - AMD Radeon 6950 XT Reference Design More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT/6900XT Reference with Backplate

The Alphacool Aurora Acryl GPX-A 6800XT/6900XT Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A 6800XT/6900XT graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-A 6800XT/6900XT cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A 6800XT/6900XT Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800XT/6900XT Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A 6800XT/6900XT also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A 6800XT/6900XT Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 260 x 142,5 x 24,5 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - Sapphire Nitro+ Radeon RX 6800 XT SE, 16GB GDDR6, HDMI, 2x DP, USB-C (11304-01-20G) - Sapphire Nitro+ Radeon RX 6800 XT, 16GB GDDR6, HDMI, 3x DP (11304-02-20G) - Sapphire Nitro+ Radeon RX 6900 XT, 16GB GDDR6, HDMI, 3x DP (11308-01-20G) Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Nitro+ mit Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Nitro+ mit Backplate

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.Fullcover Waterblock?The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.PumpThe Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.Fittings and TubingAs with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.ExpandabilityBy using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.Lighting and fansThe Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.NexXxoS RadiatorAs with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.Technical note!Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility:- MSI Radeon RX 6800 Gaming X Trio 16G, 16GB GDDR6- MSI Radeon RX 6800 XT Gaming X Trio 16G, 16GB GDDR6 Data radiatorL x W x H395 x 124 x 30mm (+/- 3%)Material cooling finsCopperMaterial chambersCopperMaterial cooling channelsCopperMaterial threadsBrassMaterial outer housingstainless steelG 1/4“ threads2 x for tubes (+ 1x Fillport G1/4“)For fan size120 mmPossible fan assembly3 x one-sided / 6 x both-sidedData cooler and pumpL x W x H295 x 152 x 46 mmMaterial cooler bottomChromel plated copperMaterial cooler topPMMAThreads2 x G1/4“Pump typeDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13.5V DCPower consumption3.2WMTBF50.000 hData liquidColorclearIngredient 1Destilled water (CAS-number 7732-18-5)Ingredient 2Glysantin (CAS-number 1017-21-1)Working temperatures-15 C° / +90 °CData quick fastenersL x D95 x 27 mmMaterialNylonFor tube size12,7 / 7,6 mmColorBlackData fittingsL x D straight fitting24 x 18 mmQuantity straight fittings2xL x B x H 90° fitting35 x 27 x 17 mmQuantity 90° fittings2xFor tube size12,7 / 7,6 mmMaterial fittingsBrassData tubeLength50 cmMaterial tubeTPV (EPDM/PP)ColorMatt blackTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CData fanSpeed0 - 2500 RPMStatic pressure3,17 mm H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25 mmNet weight187 gMax working temperature60 °C

The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data cooler L x W x H 281,5 x 130,5 x 24,5 mm Material cooler Nickle-plated copper Material cooler top POM clear Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V x Technical data backplate L x W x H 281,5 x 106 x 6 mm Material Aluminium Color Black Compatibility list: - Gigabyte Radeon RX 6800 XT Gaming OC 16G (GV-R68XTGAMING OC-16GD) - Gigabyte Radeon RX 6900 XT Gaming OC 16G (GV-R69XTGAMING OC-16GD) - Gigabyte Radeon RX 6950 XT Gaming OC 16G (GV-R695XTGAMING OC-16GD) Downloads: Datasheet PDF | Manual PDF | AMD List of Compatibility PDF Links: Graphics Card Configurator

The Alphacool Aurora Acryl GPX-A RX 6800 Nitro+ Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A RX 6800 Nitro+ graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-A RX 6800 Nitro+ cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A RX 6800 Nitro+ Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A RX 6800 Nitro+ Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A RX 6800 Nitro+ also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A RX 6800 Nitro+ Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x B: 143 x 260 x 24,5 mm Material cooler: Nickle plated copper Material top: Acetal Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - Sapphire Nitro+ Radeon RX 6800 OC 16G, 16384 MB GDDR6 More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800 Nitro+ with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800 Nitro+ with Backplate

The Alphacool Aurora Acryl GPX-A 6800(XT) Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A 6800(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-A 6800(XT) cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A 6800(XT) Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A 6800(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A 6800(XT) Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 152 x 295 x 22 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - MSI Radeon RX 6800 Gaming X Trio 16G, 16GB GDDR6, HDMI, 3x DP - MSI Radeon RX 6800 XT Gaming X Trio 16G, 16GB GDDR6, HDMI, 3x DP Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT Gaming Trio X with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800/6800XT Gaming Trio X with Backplate

With the HEATKILLER®V for AMD Radeon RX6800/6900XT we are continuing the current HEATKILLER V generation with extensive optimizations. The full-cover water block draws on over 20 years of know-how in the development and production of high-performance water coolers. Equipped with unique highlights, the latest version of the HEATKILLER® V presents what is technically feasible. Significant improvements over the predecessor: Dual layer inflow Refined, vertical cooling structure Increased flow Symmetrical cooling design Screwless cover HEATKILLER High-Luminous aRGB as standard Insulating spacers made of high-performance plastic (Peek) CNC cut thermal pads Kryonaut thermal paste By increasing the number and specially arranged cooling fins, we were able to massively increase the cooling performance directly above the graphics processor and thus improve the most important area. The cooler base, milled from a solid copper block, establishes contact with all relevant components. The pioneering dual-layer inflow distributes the water simultaneously on two levels. This ensures an inflow that is at least 30 percent higher than with our previous generation. The wide and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling performance but also the flow rate of the HEATKILLER® V. Thanks to newly designed spacers made of high-performance plastic (PEEK), the solid copper block is insulated from the circuit board as best as possible. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was made from a single piece. The symmetrical channels further underline the look of the cooler and make it a unique element in every mod. The integrated high-luminous aRGB LED strips are now also standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the computer's lighting concept. For the best possible look, the optionally available backplate is highly recommended. The unique manufacturing process conceals all electronic components without sacrificing illumination. The block in combination with the backplate makes the HEATKILLER®V for the current AMD graphics card generation look like a single unit and presents the legendary cooler in a completely new light. The legendary Kryonaut thermal paste from Thermal Grizzly ensures the best possible contact with the processor. The thermal pads, pre-cut by a CNC machine, ensure exceptional cooling of the voltage converters. This also makes installation easy, as the pads can be removed without leaving any residue. Planned modifications: Vertical connection terminal (Plexiglas®GS, Acetal) We only use selected materials from well-known manufacturers such as EVONIK, whose original Plexiglas® GS we use. Even the metals such as the high-purity copper come from renowned brand manufacturers. Production is carried out with the utmost care on our state-of-the-art CNC machinery in Waren. Many work steps are carried out by hand and each product is completed according to the four-eyes principle. Technical data: Base plate material: electrolytic copper Lid material: Acetal Material connection terminal: Acetal Dimensions: (LxWxH): 270 x 128 (incl. terminal) x 28.5mm (incl. backplate) Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: 1.2kg Pressure tested: 2 bar Compatibility: AMD Radeon RX 6800, 6800XT 6900XT in reference layout Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste

The Alphacool Aurora Acetal GPX-A 6800/6900(XT) Eisblock combines style with performance. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acetal GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A 6800/6900(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800/6900(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A 6800/6900(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. On the front of the terminal you can see the corresponding names of the compatible graphic card types. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A 6800/6900(XT) Acetal is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 130 x 262,5 x 24,5 mm Material cooler: Nickle plated copper Material top: Acetal Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - AMD Radeon 6800 Reference Design - AMD Radeon 6800 XT Reference Design - AMD Radeon 6900 XT Reference Design - AMD Radeon 6950 XT Reference Design More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! Download manual PDF: Alphacool Eisblock Aurora Acetal GPX-A Radeon RX 6800/XT/6900 Reference with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acetal GPX-A Radeon RX 6800/XT/6900 Reference with Backplate