The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. 4PACK
Vertically and Horizontally AdjustableAvailable now, the Ubiquiti Networks Window/Wall Mounting kit for NanoStation. The kit comes with interchangeable mounting adapters(suction mount for window, wall screws for wall) so the NanoStation can be easily fitted on a window or wall. Vertically and horizontally adjustable.
Industrial temperature grade (-40°C to +85°C) SFP 1.25G module with Dual LC connector for long distance 80km links. Compatible with all MikroTik products, that have SFP or SFP+ cages.
Hikvision’s DS-2DE3A400BW-DE(F1)(S5) 4 MP ColorVu PT Camera can be widely used in multiple indoor and outdoor scenes such as malls stores parks factories scenic areas entrances and exits. Accurate human and vehicle target classification and alarm and face capture based on deep learning hardware and algorithm Face capture: face tracking and grading; automatic selection of best shot; up to 5 faces detected and captured at the same time Linked audible and visual alarm. Built-in microphone and speaker Up to 2560 × 1440 @ 30 fps Min. illumination: Color: 0.0005 Lux @ (F1.0 AGC ON); 0 Lux with white light 24/7 colorful imaging with low power consumption. Up to 30 m white light distance 120 dB WDR 3D DNR HLC EIS IP66; PoE
Improved Noise ImmunityThe NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noiseimmunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.Innovative Mechanical Design• Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt.• Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole.• Easy removal The antenna feed can be detached with the push of a button.Corrosion Resistance• Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
The Toolless Mini Rack (U Rack 6U TL) is a heavy-duty, 6U-sized device rack that can be easily assembled without tools. The U Rack 6U TL is equipped with a 24-port blank patch panel, lockable casters, and can house most rackmountable Ubiquiti devices.
hEX S is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port. It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880 MHz CPU and 256 MB RAM, capable of all the advanced configurations that RouterOS supports. The device has a USB 2.0, PoE output for Ethernet port #5 and a 1.25Gbit/s SFP cage. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude.
Cube 60Pro ac A powerful point-to-point 60 GHz 802.11ay CPE for bridging distances up to 2.4 km. Long gone are the days when you had to rely on cables for speed and stability. 60 GHz solutions offer fiber-like speed and stability - while saving you plenty of time and money on installation and maintenance. Our latest Cube 60Pro product line is taking the advantages of 60 GHz networking to the next level – with the 802.11ay standard for even higher distances, stability, speed, and convenience. The Cube 60Pro ac CPE allows you to establish ultra-fast point-to-point connections over distances as far as 1 km. And that’s not all – we have added Channel 5* support, so you can reach even higher distances if necessary. In our tests, the Cube 60Pro ac easily maintained a reliable connection over 2.4 km. Bridging two locations has never been easier! You can get a preconfigured kit of two Cube 60Pro ac devices: the Wireless Wire Cube Pro. Just point the Cubes at one another and power them on! They will form a blazing fast encrypted wireless connection. Pure plug-and-play! Forget about downtime with the automatic 5 GHz backup connection The 60 GHz frequency is unaffected by the crowded wireless spectrum, it offers high speed and capacity. But it can sometimes struggle during bad weather conditions. That’s why both Cube 60Pro devices feature an automatic 5 GHz failover. We have added a powerful directional antenna so that the 5 GHz range can keep up with the 60 GHz.
The LtAP mini is a small waterproof wireless access point with integrated LTE antennas (with two u.fl pigtails) and miniPCI-e slot, so you can use your own LTE modem of your choice. The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. The unit has several powering options: 9-30 V PoE-in by Ethernet port, DC jack and microUSB. LtAP mini has a special enclosure with with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. Use the built in GPS module to track the location of your vehicle in real time, we have even provided a simple tracking application example in the RouterOS documentation, to help you start development of your platform. External GPS antenna is available for ordering separately (not included, product code GPSANT). LtAP mini (RB912R-2nD-LTm) is shipped without LTE card installed (empty miniPCI-e slot), so you can use your own LTE card.
Parameters Parameter Value Mounting type Flat surface mount Material ABS + PC plastic Weight 2x5 g Screws included Philips Pan Head screw #6-32×3/16 2pcs Dimensions 25 mm x 48 mm x 7.5 mm RoHS Compliant ✔ * - Teltonika devices are shown for demonstration purposes only and sold separately!
The USW-24 is a configurable Layer 2 switch with 24 Gigabit Ethernet ports and 2 SFP ports. The SFP ports provide 1 Gbps fiber uplink options to your enterprise network. The USW-24 features a 1.3" touchscreen compact size and fanless design. The touchscreen displays the current switch state and information for quick diagnosis. Managed and configured by the UniFi Network Controller with UniFi mobile app support the USW-24 switch offers an extensive suite of advanced Layer 2 switching protocols and features including operating mode (switching mirroring or aggregate) per port.Managed by UniFi Network Controller version: 5.12.32 or higher.
Access Point 10/100 Mbit/s, Ethernet LAN (RJ-45) ports 5, Wi-Fi standards 802.11a/n/ac, Antenna type Internal, 2.4/5.0 GHz, Data transfer rate (max) 0.867 Gbit/s
The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable since it accepts power from a wide variety of sources - USB Passive or Active PoE (802.3af and 802.3at) and power jack. In addition to using this device as a small and portable AP it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device for example you can connect a SXT CPE device to it. • PoE in 10-57V • Built in 2GHz AP • microUSB for a 3G/4G modem or for power input • Station or AP mode wireless • Any type PoE input 802.3af and 802.3at • Passive PoE output (same as input voltage)
Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection. Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active.This device is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks.You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS.This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps. CRS312-4C+8XG-RM – built for professionals, great for everyone!
The Ubiquiti UniFi Switch Ultra 60W is a pivotal addition to any network, designed to deliver both efficiency and reliability. With its stable DC 27 V power supply, this switch ensures that all connected devices operate smoothly, without any power interruptions. It's an ideal solution for businesses looking to enhance their network's productivity and connectivity. The switch's robust design and reliable performance make it a valuable asset for any setup, promising to elevate the operational standards of your network infrastructure.
RouterBoard 260GS If you’re only running a small home office you’re still going to deal with plenty of devices that have to communicate to one another. When you need to make sure that everything communicates well and you want to have a more centralized system for it you can purchase RouterBoard 260Gs one of the reputable switches in the market today. It is cost effective flexible easy to use and completely reliable. It’s a great choice for any small business owners. Carries the Benefits of Switches Switches are a great addition to any network for a variety of reasons. The RouterBoard 260GS now allows you to manage a lot of devices at one time. Moreover you can drastically improve the way they relate to one another by ensuring traffic is very clean with hardly any noise or interference that may cause one or both of them to malfunction. You can also easily keep track of how the components of your network are being used. Easy Configuration The RouterBoard 260GS is a small compact and handy device that measures 113 mm in length 89 mm in width and 28 mm in height. It’s very portable so you can move it anywhere you prefer. Also it doesn’t tend to occupy a lot of space. There are LEDs in a panel that quickly notify you of the general condition of the devices within the switch. There’s also an SFP port when you need to work with fiber channels. It is compatible to various SFP modules. Great Performance The RouterBoard 260GS comes with 5 Gigabit ports as well as a 96K SRAM and AR8327 Atheros core processor. It also operates with its proprietary switch operating system that allows you to manage the switch obtain more information about the switch restore and reset the configuration create backup and upgrade the firmware.
MikroTik LHG LTE18 Kit LHGGM&EG18-EA No Wi-Fi, Pole and Mast Mountable, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 1, 1 Gbps (RJ-45) ports quantity 1, Mesh Support No, MU-MiMO Yes, 3G/4G data sharing
A preconfigured kit of two Cube 60Pro ac (802.11ay 60 GHz) devices: the Wireless Wire Cube Pro. Just point the Cubes at one another and power them on! They will form a blazing fast encrypted wireless connection. Pure plug-and-play!
5G Ülikõrge mobiilside kiirus kuni 1 Gbps SA JA NSA Toetab mõlemat arhitektuuri, et kasutada ära 5G infrastruktuuri ÜLIVÄIKE LATENTSUS Ühekohaline latentsus missioonikriitiliste rakenduste jaoks GIGABITINE ETHERNET Usaldusväärne side suure andmeedastuse jaoks KOMPAKTSUS Üks väikseimaid turul saadaolevaid 5G-väravaid TULEVIKUKINDLUS Tagasi ühildub 4G (LTE CAT 20) ja 3G võrgutehnoloogiatega TRB500-värav on kompaktse suurusega ja energiatõhus tööstuslik värav, millel on Gigabit Ethernet-liides ja kaks konfigureeritavat I/O-d, mis võimaldab kõrgetasemelist kohandamist ja paljude stsenaariumide rakendamist. See seade võimaldab 5G-võrgu kiirust üliväikese latentsusega töökriitiliste infrastruktuuride jaoks ja suurt andmeside läbilaskevõimet, mille tagavad 4 välisantenni, mis võimaldavad 4x4 MIMO kasutamist. TRB500 on varustatud operatsioonisüsteemiga RutOS, mis pakub täiustatud turvafunktsioone ja ühilduvust meie kaugjuhtimissüsteemiga (RMS), et optimeerida suurte seadmeparkide kaugjuhtimise ja jälgimise võimalusi.
EZVIZ päikesepaneel toidab akutoitel nutikaameraid kuni 6W vooluga Ilmastikukindlalt. Päikesepaneel ühildub: EB8 2K ja teiste USB-C toitega kaameratega. Uute akukaamerate turule toomisega suureneb ka sobivate mudelite loend.
CRS328-4C-20S-4S+RM The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group. This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. ARJ45 console port is available for management and debugging, and a mode button can be customised toexecute any RouterOS commands. The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market. Switching Features • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Broadcast storm control• Port mirroring of ingress/egress traffic• STP / RSTP / MSTP• Access Control List• MikroTik neighbor discovery• SNMP• 10218-byte jumbo frames support• IGMP snooping• IEEE 802.3ad and static link aggregation Switching resultsCRS328-4C-20S-4S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput95,238.148,761.915,037.661,594.05,201.663,167.8SwitchingNon blocking Layer 2 capacity95,238.197,523.815,037.6123,188.05,201.6126,335.5SwitchingNon blocking Layer 1 throughput95,238.164,000.015,037.664,000.05,201.664,000.0SwitchingNon blocking Layer 1 capacity95,238.1128,000.015,037.6128,000.05,201.6128,000.0 Ethernet test results CRS328-4C-20S-4S+RM98DX3236A1 all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.3987.3235962.6296151.6Bridging25 bridge filter rules81.3987.390.7371.590.946.5Routingnone (fast path)81.3987.3235962.6261.9134.1Routing25 simple queues81.3987.3112.6461.2111.557.1Routing25 ip filter rules59.8726.261.4251.559.530.5
The Switch Enterprise 24 PoE (USW Enterprise 24 PoE) is a fully managed Layer 3 switch with (12) 2.5GbE 802.3at PoE+ RJ45 ports (12) GbE 802.3at PoE+ RJ45 ports (2) 10G SFP+ ports and a 400W total PoE supply. The USW Enterprise 24 PoE also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally the USW Enterprise 24 PoE offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful intuitive UniFi Network web application and mobile app.Managed with the UniFi Network application: Version 5.14.12 and laterю
A compact access point improving upon the U6 Lite by bringing higher performance and dual-band WiFi6 support. Ideal for small and medium-sized businesses.
A home network setup doesn’t have to be a compromise. This compact and quiet switch is packing some serious server room grade features: a pair of 10G SFP+ cages 512 MB of RAM 24 Gigabit Ethernet ports and a sufficient built-in CPU that can handle basic home user needs such as firewall NAT and even some VPN.Like many other MikroTik switches CRS326-24G-2S+IN offers the dual boot option that allows you to use either the lightweight SwOS or the advanced RouterOS. The compact and quiet fanless desktop case makes this switch the perfect addition to the best home setups. And it is very easy to transport! But make no mistake – this small switch has all the power and features of its bigger rackmount analogue – the CRS326-24G-2S+RM nothing has been removed!CRS326-24G-2S+IN provides all the basic functionality for a managed switch and even more: port-to- port forwarding MAC filtering VLAN configuration traffic mirroring bandwidth limitation and even adjust some MAC and IP header fields. SFP+ cage supports both 1.25G SFP and 10G SFP+ modules.
This powerful and affordable router crushes all previous CCR models in single-core performance.Like the other models in CCR2004 series this CCR also features the Annapurna Labs Alpine v2 CPU with 4x 64-bit ARMv8-A Cortex-A57 cores running at 1 7GHz. But here’s the difference. This powerful router crushes all previous CCR models in single-core performance and that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues for example.The new router has 18 wired ports including 16x Gigabit Ethernet ports and two 10G SFP+ cages. It also has a full-size USB and RJ-45 console port on the front panel.Like all CCR devices it comes in a classic white 1U rackmount case. Built-in dual redundant power supplies are included so you have one less thing to worry about. And of course there is active cooling to keep things nice and cool.Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch-chip. Each switch chip has a 10 Gbps full-duplex line connected to the CPU. The same goes for each SFP+ cage - a separate 10 Gbps full-duplex line. Boards come with 4GB of DDR4 RAM and 128MB of NAND storage.
5GHz, 29.4x8x3cm, 16dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 16dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
Build and expand your network with the UniFi® Switch, part of the UniFi Enterprise System. The UniFi Switch, model USW-Flex, is a configurable Layer 2 Gigabit switch with auto-sensing 802.3af PoE. It offers 5 RJ45 Gigabit Ethernet ports, providing 1 PoE input and 4 PoE output links to your devices.The UniFi Switch Flex features a single PoE In port for power and four PoE ports that provide up to 15W PoE output to power a UniFi access point or other PoE devices. With 802.3bt rated PoE switches (USW-Pro-48-PoE, USW-Pro-24-PoE, and USW-Industrial switches, sold separately) as power source, USW-Flex supports maximum 46W PoE output budget. It has weatherproof housing and offers versatile mounting options.Managed and configured by the UniFi Controller or UniFi Mobile app, the UniFi Switch Flex offers basic Layer 2 switching protocols and features. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features using a graphical user interface from anywhere. PoE Flexibility The USW-Flex supports a maximum PoE output budget of 46W when powered by 60W 802.3bt PoE++. Four ports offer auto-sensing 802.3af PoE output to power multiple devices on the network. Versatile Mounting The USW-Flex can be installed horizontally or vertically making it ideal for desktop, magnetic wall-mount, and pole-mount installations. Indoor/Outdoor Design The USW-Flex is designed for indoor or outdoor use. With its weatherproof housing and versatile mounting options, the USW-Flex provides both flexibility and durability for environments with extreme temperature variations. Compatible Products The USW-Flex powers a variety of products, including the UniFi Video Camera G3 Flex, UniFi Video Camera G4 Pro, and UniFi AC Mesh AP, which use 802.3af PoE. To enable its maximum power budget of 46W, the USW-Flex can be powered by the USW-Industrial switch, which provides 60W of 802.3bt PoE++. Seamless Integration A single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. Each site is logically separated and has its own network monitoring, configuration, maps, statistics, and admin accounts.
High-efficiency 4x4 WiFi 6 (802.11ax)
5 GHz band (4x4 MU-MIMO and OFDMA) with 2.4 Gbps throughput rate
2.4 GHz band (4x4 MIMO) with 600 Mbps throughput rate
Powered by 802.3at PoE (PoE injector sold separately)
IP54-rated water and dust protection for indoor/outdoor mounting versatility
UniFi Switch Enterprise 48 PoE is a reliable manageable 2.5-Gigabit L3 Switch with a switching capacity of 320 Gbps (48) 2.5-Gigabit LAN ports and four SFP+ (10 Gbps) slots. All Ethernet ports support 802.3af/at PoE-Out with an output power of 30 W/port and total PoE budget of 720 W. In addition to the standard equipment the switch also has a 1.3" touch screen for providing information about the system temperature port statistics PoE power supply and much more. The switch can be powered via standard 230 V but also via UniFi SmartPower RPS which rather backs up power in the event of an internal power failure.USW-Enterprise-48-PoE does not have web management but is managed centrally by UniFi Controller with support for the UniFi mobile application. It offers an extensive set of advanced switching protocols and L2 functions including operating mode (switching mirroring or aggregation) per port. UniFi Network Controller and mobile applications allow administrators to configure and monitor virtually all graphical user interface functions from anywhere.This generation of switches supports redundant power supply via a special connector to the UniFi SmartPower unit in the event of a failure of the primary power supply at the switch.
Type Fixed/HDTV/Megapixel/Outdoor | Pixel Resolution 8 Mega Pixel | Focal Length F 4.1-12.3 mm | IR Illumination | Sensor size 1/2" | Microphone Built-in | 1xRJ45 | Power options PoE | Power supply requirements 37-57V DC | Environment Outdoor | Operating temperature range -20 to 50o C | Dimensions O86 x 154.3 mm
