00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
Loodud spetsiaalselt filmimiseks. Et objektiivi kasutatakse valdavalt filmimiseks, on antud objektiivi puhul mängus mõiste T-stop (transmission stop), mis baseerub ava tõelisel valguse läbilaskevõimel. Töö teeb mugavamaks ...
Automatic CO/CPE negotiation reduces configuration time Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain LED indicators to simplify troubleshooting Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview Introduction The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km. The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications. To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting. Additional Features and Benefits Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality) Moxa proprietary Turbo Speed connections up to 15.3 Mbps Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery Supports SNMP v1/v2c/v3 for different levels of network management Interoperable with Turbo Ring and Turbo Chain network redundancy Support Modbus TCP protocol for device management and monitoring Compatible with EtherNet/IP and PROFINET protocols for transparent transmission IPv6 Ready
Automatic CO/CPE negotiation reduces configuration time Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain LED indicators to simplify troubleshooting Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km. The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications. To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting. Additional Features and Benefits Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality) Moxa proprietary Turbo Speed connections up to 15.3 Mbps Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery Supports SNMP v1/v2c/v3 for different levels of network management Interoperable with Turbo Ring and Turbo Chain network redundancy Support Modbus TCP protocol for device management and monitoring Compatible with EtherNet/IP and PROFINET protocols for transparent transmission IPv6 Ready
150/150Mbps Downstream/Upstream, suure jõudlusega Gigabit Ethernet over Phone Wire lahendusPLANET VC-231G, uue põlvkonna ja suure jõudlusega Gigabit Ethernet-over-VDSL2 konverter, töötab hästi koos läbiva telefoniliinivõrguga, mille sümmeetriline andmeside kiirus on kuni 150/150Mbps (G.INP, Sym, 8dB) 300m kaugusel ja 22/10Mbps 1,4km pikkusel distantsil. See põhineb kahesugusel võrgutehnoloogial, Gigabit Ethernetil ja VDSL2-l (Very-high-data-rate Digital Subscriber Line 2). VDSL2-tehnoloogia pakub absoluutselt kõige kiiremat andmeedastuskiirust olemasolevate vasest telefoniliinide kaudu, ilma et oleks vaja ümberjuhtimist.Suure jõudlusega Ethernet üle VDSL2Uusima VDSL2-tehnoloogia kaudu pakub PLANET VC-231G kiire juurdepääsu Internetile, kuni 190Mbps nii üles- kui ka allavoolu andmeedastuseks. Tänu integreeritud ITU-T uue G.993.5 vektoritehnoloogia toetusele töötab VC-231G koos vektorit võimaldavate DSLAMidega, et kõrvaldada ristlülitushäired ja suurendada maksimaalset ribalaiust olemasoleva vaskinfrastruktuuri kaudu.Rakendamine koos olemasolevate telefonivaskjuhtmetegaVC-231G on ka Long Reach Ethernet (LRE) konverter, mis pakub ühte RJ45 Ethernet-porti ja ühte RJ11 telefonipesa, mis on mõeldud VDSL2-ühenduse jaoks. Kasutage VC-231G pakendis olevat täiendavat jaoturit, et jagada olemasolevat telefoniliini POTS-iga, seega ei ole olemasoleva vaskjuhtmestiku asendamine vajalik. Lihtsalt ühendage VC-231G koos täiendava splitteriga olemasolevasse RJ11-telefonipessa ja saate ühendada suure jõudlusega VDSL2-võrgu. See sobib ideaalselt olemasoleva Ethernet-võrgu laiendamiseks.Kõrge nõudlusega teenuseühenduse pakkumine ISP/Triple Play seadmetele.VC-231G pakub suurepärast ribalaiusnõudlust koduse meelelahutuse ja kommunikatsiooni triple play seadmetele. Tänu asümmeetrilisele andmeedastusele 190/100Mbps (G.INP, Asym, 8dB) võimaldab VC-231G kohalikus võrgus töötada paljude multimeedia teenuste, nagu VoD (video on demand), voice over IP, videotelefon, IPTV, Interneti vahemäluserver, kaugõpe jne.Lihtne ja paindlik paigaldusEthernet-over-VDSL2-muundur on plug-and-play disainiga ja ühildub täielikult kõigi võrguprotokollidega. Lisaks saab iga üksiku pordi ja kogu süsteemi tööseisundit jälgida esipaneelil asuvate rikkalike diagnostiliste valgusdioodide abil. VC-231G pakub rakenduseks kahte režiimi, CPE ja CO - CPE režiimi kasutatakse kliendi poolel ja CO režiimi keskuse poolel. CPE- või CO-režiimi saab reguleerida sisseehitatud DIP-lüliti abil. Punkt-punkt ühenduseks tuleb CPE-režiimis VC-231G ja CO-režiimis VC-231G seadistada ühe konverteripaarina, et luua ühendus.ADSL2+ tagasilangusNende Interneti-teenusepakkujate jaoks, kes pakuvad endiselt ADSL-lairibateenust, võib VC-231G toetada ADSL2+ tehnoloogia abil kuni 24 Mbit/s edasisuunalist ja 1 Mbit/s ülesuunalist ülekandekiirust. VC-231G loob ühenduse ISPga ja seda saab pärast ISP võrgu uuendamist ka otse VDSL2-le üle lülitada.
Suure jõudlusega tööstuslik Gigabit Ethernet Extender Selleks, et rahuldada pika vahemaa ja suurema kiirusega nõutavaid Ethernet-rakendusi üle koaksiaal- või 2-juhtmeliste UTP-rakenduste, pakub PLANET Technology uut tööstuslikku Ethernet Extenderit, IVC-234GT. Sellel on üks BNC-port ja üks RJ11-port pikamaaühenduseks VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) tehnoloogiaga ning 4 10/100/1000BASE-T RJ45 Ethernet-porti. Selle õhukese suurusega metallkorpus muudab seadme paigutamise mugavaks. IVC-234GT, mis töötab hästi läbivalt koaksiaal- või RJ11-võrguga, pakub suurepärast ribalaiust kuni 300Mbps kogu dupleksandmeside kiirusega, mis võib ulatuda maksimaalselt kuni 1,2 km kaugusele. Kui IP-võrk, mis koosneb HD-IP-kaamerast, traadita juurdepääsupunktist, NVRist ja digitaalsest kuvarist, vajab laiendamist üle 100 meetri, on IVC-234GT parim valik, kuna see suudab edastada andmeid üle koaksiaalkaabli või telefonijuhi. 100-meetrist vahemaad saab pikendada ainult UTP-kaabli abil.Suurepärane üles- ja allavoolu edastamineIVC-234GT konstruktsioon põhineb kahetüvelisel võrgutehnoloogial, Gigabit Ethernetil ja VDSL2-l. IVC-234GT pakub stabiilset, kuid samas kiiret punktist-punkti võrguühendust kuni 300Mbps dupleksse andmeedastuse kiiruseni. See pakub 2 selektiivset ülekanderežiimi - asümmeetriline režiim või sümmeetriline režiim - üles- ja allavoolu signaalide edastamiseks. ■ Asümmeetriline režiim - allavoolu kuni 200Mbps ja ülesvoolu kuni 100Mbps ■ Sümmeetriline režiim - allavoolu kuni 150Mbps ja ülesvoolu kuni 150MbpsSümmeetriline režiim tagab sarnase edastamiskiiruse nii allavoolu kui ka ülesvoolu, samas kui asümmeetriline režiim tagab kõrgema ülekandekvaliteedi lühikeses vahemikus. Kui IVC-234GT on sümmeetrilises režiimis, pakub ta paremat ülesvoolu jõudlust ja kui ta on asümmeetrilises režiimis, pakub ta paremat allavoolu jõudlust.Ethernet üle pika vahemaa olemasoleva koaksiaal- või RJ11-kaabli kauduIVC-234GT on ka Long Reach Ethernet (LRE) lahendus, mis pakub kiiret asendust ja sujuvat üleminekulahendust olemasolevast analoogsüsteemist täielikult digitaalsele süsteemile. Sellel on kaks ülekandetüüpi, koaksiaal- või RJ11-kaabel. Tavalist UTP-kaablit saab pikendada ainult kuni 100 meetrini, kuid IVC-234GT abil saab Ethernet-võrgu kaugust pikendada kuni 1200 meetrini, mis on ideaalne järgmisteks võrgurakendusteks: ■ kaugele ulatuvad IP-võrguseadmed ■ IP-digitaalnäidikud ■ kaabeltelevisioon IPTV-le ■ Kaugvideoõpe ■ Elektroonilised reklaamtahvlid ■ Muud rakendusedKui teie olemasolevas keskkonnas on koaksiaal- või RJ11-kaabel, saate väga lihtsalt paigaldada paar IVC-234GT, ilma et oleks vaja ehitada täiendavaid võrgukaableid, säästes seega võrgu ehitamise kulusid.Lihtne ja paindlik paigaldusIVC-234GT pakub kahte töörežiimi, kliendipoolset CPE-d ja keskseadmepoolset CO-d, mis muudab mis tahes võrgurakendused lihtsaks ja paindlikuks. CPE- või CO-režiimi saab reguleerida sisseehitatud DIP-lüliti abil. Punkt-punkt ühendamiseks tuleb üks IVC-234GT CPE-režiimis ja teine CO-režiimis seadistada konverterite paarina, et ühendus saaks toimuda. See võimaldab administraatoril tõhusalt hallata võrku koaksiaalkaabli kaudu, muutes pikamaaülekande paremaks.ADSL2+ tagasilangusADSL-lairibateenuseid pakkuvatele Interneti-teenusepakkujatele võib IVC-234GT toetada ADSL2+ tehnoloogia abil kuni 24Mbps allavoolu kiirust ja 1Mbps ülesvoolu kiirust. IVC-234GT saab pärast võrgu uuendamist ka otse VDSL2-le üle minna.
High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
