Adder KVM switch KVM switch/matrix: 1x HDMI, 1x RJ45, 3x USB 2.0, Audio 3.5mm, PoE toide, välise toitega

The AdderLink XDIP is a compact, easy to install, fanless matrix solution that runs on a standard IP network and enables users to extend and manage their computers with ultra-low latency, HD video and stereo audio. The XDIP is scalable, from simple extension to small matrix. It is very well suited to small and medium sized installations. • Uses IP technology over standard CATx network cable • Point-to-point, switching, sharing or small matrix operation • Local USB and video feed through ports • PoE models are powered by PoE or an optional external PSU • USB2.0 (low & full speed) for keyboard, mouse, tablet and touch screen • Analog audio with headphone support Product Codes XDIP-POE XDIP-IEC XDIP-xx XDIP-RED XDIP-PSU-US* XDIP-PSU-RED* * US market specific     Configurable units The XDIP user and computer units are the same and assigned a role at set up. They can transmit/receive up to 1920x1200 video, stereo analog audio and USB2.0 over a single CATx network cable. High quality video, real time control XDIP implements low latency, high quality, 60Hz video compression to deliver an “at the computer” user experience over a standard Gigabit LAN. CATx cable for connection Video, USB2.0 and audio all pass along a single minimum spec of CAT5e cable allowing use of existing infrastructure cables in the building and an immediate ROI. Distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances are achieved by routing through your IP infrastructure. Feed through and local computer support Video and USB feed through ports are available. These enable a local console at the source computer. A local computer is also supported at the user station. One solution, many uses   XDIP nodes can be configured as a simple extender, distributed KVM switch or KVM sharer or any combination up to 8 computers and 8 users (each user does not necessarily need to be connected to the same 8 computers). EDID management The extender has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer or alternatively, a fixed EDID can be specified. Plug and Play There is no need for drivers or software to be installed. A simple wizard takes you through setup at the start of life of the product. CD-quality analog audio CD-quality stereo audio (16-bit sampling at 48kHz) is passed between the local and remote units. Headphones are also supported (16 to 32 Ohms).