eSun EPLA-SILK 1.75mm SILVER 1kg - 3D FILAMENT (EPLA-SILK-P175S1)

eSun PLA-Silk Filament 1.75 mmeSUN PLA-Silk filament in silver allows you to create 3D prints with a smooth surface and a distinctive, silky sheen. The material combines an elegant finish with the ease of printing typical of PLA. It features low shrinkage, good layer adhesion, and a stable diameter, making it easy to produce precise models. It is particularly well-suited for printing figurines, vases, ornaments, and other decorative items that need to look good right out of the printer.Silky sheen without polishingFilmanet PLA-Silk gives models a glossy finish that works especially well when printing decorative items. The smooth surface allows you to achieve an interesting visual effect without additional polishing. The filament is also suitable for creating models with intricate shapes, where both print accuracy and the appearance of the finished object are important.Stable and convenient printingThe filament melts well and flows smoothly through the nozzle, reducing the risk of clogging. Its consistent diameter and even winding on the spool minimize the likelihood of the material tangling during operation. Low warping and good layer adhesion help maintain the intended shape of the print. An additional advantage is that supports peel off easily, which streamlines the removal of support structures after printing is complete.Recommended print parametersThe 1.75 mm diameter filament is designed for 3D printers using FDM technology. The recommended nozzle temperature is 190–230°C, and the recommended heated bed temperature is 45–60°C. The print speed should be within the range of 40–100 mm/s, with fan cooling set to 100%. The tensile strength is 52 MPa, and the flexural strength is 65 MPa. Due to its heat deflection temperature of 50°C, this material is best suited for models that will not be exposed to high temperatures. ManufacturereSUNModelPLA-SK175S1P1Filament TypePLA-SilkMaterialPLAColorsilverFinishglossy, silkyFilament Diameter1.75 mmWeight1 kgPrinting TechnologyFDMNozzle Temperature190–230°CHeated Bed Temperature45–60°CRecommended Print Speed40–100 mm/sCooling100%Density1.21 g/cm³Melt Flow Index (MFI)4.8 g/10 min (190°C / 2.16 kg)Tensile strength52 MPaElongation at break14.4%Flexural strength65 MPaFlexural modulus1447 MPaIzod notched impact strength5.86 kJ/m²Heat deflection temperature50°C