Võrguseade Thermal Grizzly Heater Intel 1851 Delid-Die-Mate V

Heating element for heating the CPU for a smooth delidding process Suitable for the Intel 1851 Delid-Die-Mate V1 With OLED display for status indication for quick overview The Delid-Die-Mate Heater: Heating element for CPU delidding The Intel 1851 Delid-Die-Mate Heater V1 is a specially designed heating element for the Intel 1851 Delid-Die-Mate V1. The heater heats the CPU and delidder to a necessary temperature of 165°C for delidding. Operation is via a control unit with OLED display, which is connected to the heater with two cables. To operate the heater, a laptop/smartphone charger with a power output of at least 65 watts and a USB Type-C connector is required, which is not included! A small amount of thermal paste is also needed. Warning notices: The CPU should be heated to 165°C for delidding with the Intel 1851 Delid-Die-Mate V1 (the melting point of indium is 157°C), so that the indium liquefies for removing the heatspreader. This minimizes mechanical stress on the chip and avoids damage. Otherwise, there is a high risk that the CPU may be damaged during delidding. Warning: Removing the heatspreader ("delidding") of a processor is done at your own risk! Delidding the CPU voids the manufacturer's warranty! Damage caused during CPU delidding is not covered by the manufacturer! Warning: When delidding a CPU with the Intel 1851 Delid-Die-Mate V1, be sure to follow the manufacturer's instructions!