Lian Li UNI FAN SL-INF 120 ARGB Reverse Blade, 3 Pack + Controller, Black

3-pack of 120mm PWM intake fans in black with aluminum frame Convenient plug-in system for less cabling 40 digitally addressable RGB LEDs and infinity mirror effect Speed and lighting controllable via software Max. 2,100 RPM at 32 dB(A) 108.05 m³/h maximum airflow and max. 2.02 mmH2O static pressure Rubber dampers for vibration reduction Note: The plug-in system is only compatible with LULI-028, LULI-029, LULI-030, or LULI-031 The Lian Li UNI FAN SL-INF 120 Reverse Blade: Intake fan with extra power! The Lian Li UNI FAN SL-INF 120 Reverse Blade is a 120 mm PWM intake fan. The reverse blade version intake fans allow you to create a uniform look when used with conventional UNI FAN SL-INF fans. With the reverse blade fans, you can create an airflow in the opposite direction while still displaying the stylish side with the infinity mirrors. This ensures that, even with reversed airflow, you always see the aesthetic side of the fan—for a consistent look in your case. As a further development of the UNI FAN SL, it features improved airflow over the UNI FAN SL-INF and is excellent for use on radiators, but also looks great as a case fan. The innovative daisy-chain plug-in system provides a tidy look with minimal cable clutter. A true highlight of the Lian Li UNI FAN SL-INF 120 Reverse Blade is the strong ARGB lighting, which, especially in combination with the infinity mirrors, creates spectacular lighting effects. Installation of the Lian Li UNI FAN SL-INF 120 series follows a clever and unique concept: The fans have pin contacts and are connected via a practical plug-in system. Multiple UNI FAN SL-INF 120 mm fans are connected to form a cluster and no longer need to be connected individually by cable—this saves a lot of time and prevents cable clutter. The pin contacts transmit both power and PWM and ARGB signals. Revised plug-in system for the Lian Li UNI FAN SL-INF 120 series The plug-in system introduced with the UNI FAN SL and AL series has been further improved with the UNI FAN SL-INF 120 series. For one thing, the plug is now removable, which avoids possible collisions with radiator connections and provides a cleaner look. The cable module connector has also been made smaller and relocated to the center of the frame, further facilitating radiator use. The previously separate cables for power and ARGB have been combined into a 7-pin cable that can be oriented in two directions. An adapter to separate the two strands for direct connection to the motherboard is included with the single-version fan. Note: The connectors of the SL-INF series are not compatible with the SL and AL series! Suitable for cases, radiators, and CPU air coolers The hydrodynamic bearing of the Lian Li UNI FAN SL-INF 120 Reverse Blade ensures high smoothness and long lifespan. Thanks to reduced friction losses, higher speeds are achieved at the same power consumption compared to conventional fans. The effective speed ranges from 200 to 2,100 RPM. If desired, the fans can be completely switched off via software. With up to 32 dB(A) at full load, the UNI FAN SL-INF 120 Reverse Blade is not excessively loud and, with a 108.05 m³/h airflow and 2.02 mmH2O static pressure at full speed, offers strong performance values. Strong ARGB lighting and infinity mirrors The Lian Li UNI FAN SL-INF 120 Reverse Blade is equipped with a total of 40 digitally addressable RGB LEDs. They are distributed across the rotor hub and two slim strips in the aluminum frame. On the front of the hub and on two sides, there are also infinity mirrors that uniquely enhance the lighting effects. To control the speed and ARGB lighting, you can connect fan clusters directly to the motherboard via an adapter. They are recognized by the free L-Connect 3 software and can be configured there. Alternatively, you can connect the 7-pin cable to one of the two ports on the L-Connect 3 controller, which is included with the 3-pack versions of the UNI FAN SL-INF fans (LULI-028, LULI-029).