Thermal Grizzly Putty Basic TG-P-B-100-R Pink

Thermal Grizzly introduces the Thermal Putties, a new product line specifically developed for the modification of graphics cards and the replacement of thermal pads between PCBs and heatsinks. However, Thermal Putties can also be used by hobbyists and experienced technicians for a variety of devices such as notebooks, handhelds, and gaming consoles. Flexible alternative to thermal pads with versatile areas of application Especially suitable for heatsinks with varying distances to critical components Basic version with medium thermal conductivity for efficient components Safe to use due to electrically insulating properties The flexible alternative to thermal pads: The Thermal Grizzly Putty Basic Thermal Grizzly Putty is a non-conductive alternative to traditional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences and is thus ideal as a replacement for thermal pads on graphics cards and other devices.⁣ Typically, several types of thermal pads of different heights are installed at the factory. When replacing these pads or modifying the cooler to a GPU water cooler, several different pads are needed. The flexible usability of Thermal Grizzly Putty solves this problem. How much Thermal Grizzly Putty do I need? For modifying a single, smaller graphics card without a backplate (e.g. GeForce GTX 1060), approximately one 30-gram jar of Thermal Grizzly Putty is needed. For a larger graphics card like a GeForce RTX 4090, usually one 30-gram jar is sufficient for the memory (VRAM) and voltage converters (VRM) on the front. On the back, between the PCB and the backplate of larger graphics cards, there is often a uniformly larger gap between the two surfaces. To completely fill this gap, about two 30-gram jars or one 100-gram jar are needed. Three variants for different applications With three different variants, the manufacturer offers the right product for every performance class. The Basic version is suitable for efficient components that produce little heat. The Advance version, with higher thermal conductivity, targets the mid-range segment with stronger components. For the high-end segment, Thermal Grizzly offers the Putty Pro, which ensures optimal cooling of your high-end components due to its excellent thermal conductivity. Flexible and safe application Before application, the target surface should be thoroughly cleaned and degreased, for example with Thermal Grizzly cleaning wipes or standard isopropanol. Thanks to its electrically insulating property, it can be applied over large areas using the included spatula. Alternatively, the Thermal Putty can be shaped by hand into small balls that can be sized according to the surface being covered (e.g. VRAM, SMD).