Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®.(Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316, Dremel® - Art.No: 32196 and 32229) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 60cm WARNING:Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note:Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention:This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Set aus drei 120-mm-Gehäuselüftern, max. Drehzahl von 1.500 U/min, max. Lautstärke von 30 dB(A), 4-Pin-PWM-Anschluss, bietet adressierbare RGB-Beleuchtung
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Darkflash Darkair LED white active CPU coolerProvide your CPU with optimal working conditions. Darkflash Darkair LED active cooling guarantees efficient cooling and heat dissipation and optimizes this process in real time. It also features LED backlighting, giving your hardware configuration a modern touch.Performance first and foremostThe design of the device has been thought out in such a way as to achieve maximum efficiency. The copper base fits perfectly to the CPU to achieve high thermal conductivity. The cooling is also equipped with 4 heat pipes, responsible for an even, efficient heat dissipation. What's more, the PWM function controls the speed of the fans in real time - optimizing their operation.User-friendlyDon't be afraid of problems when installing the cooler. The product is user-friendly and installation is relatively simple. The device is compatible with Intel and AMD platforms - sure to work well with your hardware.ProducerDarkflashModelDarkair LEDColorWhiteCooling typeActiveNumber of fans1Speed1600 RPMMaximum noise level29 dBAService life30000 hSupply voltage12 VConnector4 PinBearing typeHydraulic BearingIlluminationLEDNumber of heat pipes4CompatibilityIntel: LGA 115x / 1366 / 17xxAMD: AM4/FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2Fan Size120x120x25 mmDimensions121.7 x 156.85 x 45.7 mmWeight300 gHeat sink materialCopper + AluminumTDP160 W
Dual-tower cooler for high-performance CPUsSix 6 mm heat pipesOne 120 mm and one 130 mm fan for improved airflowFans with a maximum of 2,200 revolutions per minuteVery high airflow with a maximum of 138.08 m³/h and static pressure of up to 2.57 mmH2OLow noise at full load (maximum 32.1 dB(A))High compatibility with Intel and AMD processorsJonsbo HX6280: Powerful dual-tower cooler for high-end processorsWith the Jonsbo HX6280, your CPU is well-equipped to handle even the most demanding tasks without performance loss. It is effectively kept cool by the two differently sized fans, preventing overheating.Efficient cooling through different fansInstead of limiting the fans to one size, Jonsbo relies on two different fans for the HX6280. The 120 mm fan rotates at a speed of up to 2,200 revolutions per minute, with a maximum airflow of 123 m³/h and a static pressure of up to 2.57 mmH2O.On the other hand, the 130 mm fan reaches up to 2,000 revolutions per minute, with a maximum airflow of 138.08 m³/h and a static pressure of up to 2.01 mmH2O. The differently sized fans lead to a more efficient airflow and, therefore, to overall better cooling.Noise level and compatibilityEven at full load, the CPU cooler operates surprisingly quietly: the 130 mm fan is no louder than 32.1 dB(A). Whether you're gaming or working, disturbing fan noise is not a problem. With high compatibility with the common AMD and Intel sockets, you also have the choice of which CPU to use.
PowerWalker VFI 1000RM LCD With true double-conversion online UPS design, PowerWalker VFI 1000RM LCD provides powerful and overall protection to your sensitive devices. It can accept wide input voltage for harsh environment. It offers full protection for critical devices such as sensitive servers, network/telephone communication systems as well as for industrial applications. With its slim design it only requires 2U valuable space of your rack system. The UPS can be installed in 19 rack systems or used as tower. True double-conversion Pure sine wave output Hot-swappable battery design Monitoring software included Output power factor 0.8 Wide input voltage range (110-300 VAC) Input power factor correction 0.99 50/60 Hz frequency converter mode ECO mode operation for energy saving Programmable power management outlet Emergency power off (EPO) function Intelligent fan control for reduced noise level Smart battery charger to extend battery life Optional: SNMP module, dry contact AS/400 card, M BS, ATS, Battery Pack, Rack installation kit, RBS Type Online-USV (UPS) Nominal Power (Watt) 800 Nominal Power (VA) 1.000 Number of Batteries 3 Max. Backup Time (100W Load / Min.) 60 Display LCD Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Out 8x Colour Black Width (mm) 438 Height (mm) 88 Depth (mm) 480 Weight (kg) 18,4
V7 SDHC card class 4 cards are the perfect way to store and share your favorite digital media content such as photos, videos, music and more for an array of digital products, including digital cameras, camcorders, MP3 players and computers. With fast data transfer rates, you can choose from 4GB to 32GB for greater capacity needs, especially highdefinition video and high-resolution digital photography.- 5 Years Warranty- Content Protection for Recordable Media (CPRM).- Built-in Error Correcting Code (ECC) to detect and correct transfer errors- Support in system programming (ISP)Maht16 GBVälkmälukaardi tüüpSDHCVälkmälu klassKlass 4Lugemise kiirus10 MB/sKirjutamise kiirus4 MB/sKirjutuskaitse lülitiJahToote värvMitmevärvilineKorpuse materjalPlastRoHS-vastavusJahLaius32 mmSügavus24 mmKõrgus2 mmKaal8 gKogus pakendi kohta1Pakendi laius81 mmPakendi sügavus6,5 mmPakendi kõrgus129 mmPakendi tüüpVillPäritoluriikTaiwan
Product kirjeldus: Team C183 - USB flash drive - 128 GB Product Type: USB flash drive liides Type: USB 3.1 Gen 1 Mälumaht: 128 GB Enclosure värv: must OS Required: Apple MacOS X 10.6 või uuem, Linux 2.6 või uuem, Microsoft Windows Vista / 7 / 8 / 8.1 / 10 Manufacturer Warranty: Limited eluaegne garantii
Modulares SFF-Gehäuse für Mini-ITX-Mainboards, robuster Edelstahlrahmen mit variablen Streben, vertikaler Grafikkarteneinbau mit bis zu 358 mm Länge, bis zu 8x 140-mm-Lüfter, Radiatoren bis 280 mm, ATX- oder SFX-Netzteile
Mini-ITX and M-ATX case in black, for motherboards in Mini-ITX or M-ATX format, eight different installation options, external IO hub, mesh grille for improved air intake, up to seven 120mm fans, and two simultaneous 360mm radiators.
