The two clamp set is suitable for the equalizing tanks of the Z-series from Bitspower. They make it possible to mount the expansion tank individually inside or outside the case, also with the corresponding pump. The set contains two clamps each with four screws and nuts. The holders have an 80mm, 5mm high and 15mm deep base. The clamps themselves are 10mm wide, have an inside diameter of 60mm and an outside diameter of 66mm. Technical Data: Dimensions: 80 x 70 x 15 mm (W x H x D) Inner Diameter Clamps: 60 mm Outer Diameter Clamps: 66mm Material: Plastic Color: Black Compatibility: Bitspower water tanks of the Z-series
The Distroplate D1 was developed in cooperation with ITRaid especially for the Lian Li PC-011 Dynamic XL. It enables components such as the graphics card, processor and radiator to be connected to each other and also ensures a clean design. The D1 finds its place directly next to the IO Shield. Technical details: Dimensions without pump (W x H x D): 352 x 124 x 16 mm Colour: transparent Material: acrylic glass, plastic Connections: 7x G1/4 ports
EK Water Blocks EK-Torque STC-16/12 color ring pack of 10, black. These exchangeable rings for the 16 / 12mm Soft-Tube compression fittings from EKWB are made of aluminum, are available in different colors and give your system a unique look. Compatibility: EK-Quantum Torque STC-16/12 connections Technical specifications: Color: Black Material: aluminum Quantity: 10 pieces
ASUS Dual GeForce RTX™ 4060 EVO OC Edition 8GB GDDR6 with two powerful Axial-tech fans and a protective backplate for broad compatibility - Powered by NVIDIA DLSS3, ultra-efficient Ada Lovelace arch, and full ray tracing - 4th Generation Tensor Cores: Up to 4x performance with DLSS 3 vs. brute-force rendering - 3rd Generation RT Cores: Up to 2x ray tracing performance - OC edition: Boost Clock 2535 MHz (OC Mode)/ 2505 MHz (Default Mode) - Axial-tech fan design features a smaller fan hub that facilitates longer blades and a barrier ring that increases downward air pressure. - 0dB technology lets you enjoy light gaming in relative silence. - Dual ball fan bearings can last up to twice as long as sleeve bearing designs. - A protective backplate secures components during transportation and installation. - Auto-Extreme Technology uses automation to enhance reliability.
PowerWalker VI 800 SW With its digitalized PWM-based controller PowerWalk er VI 800 SW provides a pure sine wave output especially best suitable to protect modern PC like mini servers, gaming PC, point of sale (POS) systems and other electronic devices with APFC power supplies. Not only limited to APFC power supplies and equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small and medium office application. Pure Sine Wave Super smart charger to shorten charging time Built-in boost and buck AVR Auto restart while AC is recovering Off-mode charging Cold start function USB communication port RJ-11, RJ-45 surge protection Monitoring software included LCD display for status view Technical Details: Capacity: 800VA / 480W Input Voltage 220/230/240VAC Voltage Range 162-290VAC Output Voltage: 220/230/240VAC Voltage Regulation (Battery Mode): ± 10 % Frequency: 50 or 60Hz Freq. Regulation (Battery Mode): ± 1 Hz (Battery Mode) Waveform: Pure Sine Wave Transfer Time Typical 2-6ms Battery Type: 12V / 9Ah Quantity: 1x Recharge Time: 4h to 90% LCD Display Indicators: AC mode, Battery mode, Load level, Battery capacity, Input voltage, Output voltage, Overload alarm, Fault alarm and Low battery alarm Audio Indicators: Battery Mode: Beep every 10 sec Low Battery: Beep every second Fault: Continuous Beep Battery is faulty: Beep every 2 sec UPS overload: Beep 2 times per secon Full Protection Discharge: Yes Overcharge: Yes Overload: Yes Short circuit: Yes Type Line Interactive USV (UPS) Nominal Power (Watt) 480 Nominal Power (VA) 800 Number of Batteries 1 Max. Überbrückungszeit (100W Last / Min.) 17 Display LCD Warnmeldungsanzeige Acoustical Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Ausgang 3x Colour Black Width (mm) 100 Height (mm) 145 Depth (mm) 328 Weight (kg) 6
Fujitsu UPS devices ensure high-performance power supply protection for systems and data, and thus provide reliable protection against power failure, current fluctuations and electrical interference. Fujitsu offers both line interactive (VI) and online (VFI) devices with double conversion technology in line with the UPS classification according to IEC 62040-3. Capacities of up to 3000VA provide the right power supply and technology for all individual requirements.The use of uninterruptible power supplies can particularly benefit your company from a financial viewpoint: Having to search for and restore lost or damaged data after a power failure can cost a great deal of time and money. In such incidents UPS helps to protect your data.Väljundvõimsuse potentsiaal750 VAVäljundvõimsus500 WVäljundi tööpinge (minimaalne)230 VAC-väljundi tüüpC13 pistikutAC-väljundite arv6 vahelduvvoolu kontaktUSB 2.0 portide arv1Jadaportide kogus1Tüübipärane varundamisaeg poole koormusega16 minTüübipärane varundamisaeg täiskoormusega5 minKujutegurTornToote värvMustPuhvertoiteallika topoloogiaLiini-interaktiivneLaius138 mmSügavus363 mmKõrgus161 mmKaal13,2 kg
Passiv gekühltes Mini-ITX-Gehäuse, für Supermicro A1SAi/A1SRi-Mainboards, lüfterlos und leise, Platz für vier 2,5-Zoll-Laufwerke, edle Außenhülle aus Aluminium mit Kühlfinnen, 2x USB 3.0
TRENDnet’s Corner Mount Bracket, model TV-HN400, installs a TRENDnet SpeedDome series network camera 30 cm (12 in.) off of an outside corner surface. This rugged powder-coated aluminum mount features a suspension point from which to hang the camera during installation and mounting hardware.- InstallationInstalls on outdoor ceiling or horizontal surface- CompatibilityCompatible with TRENDnet SpeedDome series network cameras- ConstructionRugged powder-coated aluminum construction- Seal RingSeal ring maintains waterproof seal against flat surface- Suspension PointOffers a suspension point from which to hang the camera during installation- Mounting HardwareMounting hardware includedToote värvValgeÜhilduvad tootedTV-IP450P, TV-IP450PI, TV-IP430P, TV-IP430PIKaal2,2 kgLaius419,5 mmSügavus194 mmKõrgus176,8 mm
R11e-5HacD is Mikrotik new 802.11ac card in miniPCI-express format, perfect for any RouterBOARD with miniPCIe slot, such as RB953, RB912, RB922, RB800 or x86 devices with RouterOS.The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity and wireless signal strength - just looking at the card will help with installation and alignment.
RouterBOARD RB711 is equipped with an integrated Atheros 802.11 b/g/n radios (MMCX connector). It is thus predestined as a client unit. With support for Power over Ethernet is perfect for outdoor solutions. Contains RouterOS L3 license. Mikrotik RouterOS fully supports IPv6 network. There are these functions implemented in the current version: * Static address allocation and routing * Router advertisement daemon (the address autoconfiguration) * Dynamic routing: BGP +, OSPFv3, and RIPng protocol * Firewall (filter, Mangle, address lists) * DNS * 6in4 (SIT) tunnels * Telnet * Ping * Traceroute * Web proxy * Fetch and sniffer tools Specifications TX Power regulation yes (by 1 dBi) Max.output power 27 dBm Sensitivity -92 dBm LAN port 1x 10/100 Mbit/s Default name admin Power supply POE (8-30) Operational temperature from -30°C up to 65°C Dimension 105 x 105 mm Weight 0,09 kg Interface LAN, WiFi 802.11n 2,4GHz Supported OS Mikrotik - RouterOS Level 3 Procesor Atheros 400 MHz RAM 32MB DDR SDRAM NAND 64 MB Slots none
Teltonika FMT100 smart waterproof GNSS tracker with Bluetooth connectivity and internal backup battery. Solid waterproof case and build-in accelerometer & gyroscope sensors with extremely accurate crash trace functionality makes this device perfectly suitable for insurance market solutions.Combined accelerometer & gyroscopeBuild-in accelerometer and gyroscope sensors with extremely accurate crash trace functionality makes FMT100 perfectly suitable for insurance market solutions.Fast & Easy mountingThe biggest high gain GNSS antenna in all FM series devices allows mounting FMT100 device directly on car battery under the hood. For faster and easier mounting FMT100 case is equipped with mounting tape and special clamp connectors for power cable connection to the car battery.Smart Crash detectionEnsure safety of Your employee with smart Crash detection. Get alarm message immediately after accident, save workers life!BluetoothIntegrated Bluetooth 4.0 BLE allows usage of various wireless sensors and grants compatibility with previously available Bluetooth V3.0 features like device configuration, firmware update, headset support. Retrieve temperature and humidity information from Bluetooth sensors without the need of wired connection – reduce installation costs. Make phone calls to your employee via Bluetooth headset – be sure that your employee is always safe and uses hands free headset instead of phone!Advanced antitheft systemPrevent your vehicle from theft with advanced antitheft functionality. Combine Auto Geofencing with new Towing detection functionality.
Cat.6 U/FTP flat network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250MHz using the shielded version with foil shielded single pair shielding (U/FTP). Designed as flat ribbon cable for use in environments with restricted or limited installation space. Suitable for use in Gigabit Ethernet networks. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The very fleixible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.Available lengths: 0.3m, 1m, 2m, 3m, 5m, 10m.Available colours: Black, Grey, White.
