LTC kaubamärgi klaviatuur on ideaalne seade koju ja kontorisse. Klaviatuur on täissuuruses ja varustatud numbriklaviatuuriga. See lihtsustab oluliselt andmete sisestamist ja numbrilisi toiminguid. Klahvid on lähestikku, mis muudab klaviatuuri igapäevaseks kasutamiseks väga kasutajasõbralikuks ja see näeb laual väga moodne välja. Eelprogrammeeritud klahvid hõlbustavad multimeedia juhtimist ja navigeerimist operatsioonisüsteemis. Klaviatuuri juhtme pikkus on 1,5 m ja mõõtmed 446 x 136 x 24 mm. Ühendusliides on USB 2.0.
Kabellose schwarze Gaming-Tastatur, im Mini-Format (60 %), mit deutschem Layout, anpassbare RGB-Beleuchtung, Switches mit anpassbarer Auslösehöhe, unterstützt 2,4-GHz-Funk und Bluetooth 5.0
The nickel-plated temperature sensor in the colour shiny silver from Bitspower is an easy way to keep an eye on the water temperature of a water cooling system. To do this, the sensor, which has a sealing ring, is screwed into a G1/4" thread, whereby an internal extension then measures the temperature of the surrounding water. With a 90cm long 2-pin cable, the sensor can be connected to a display or control unit or to a compatible motherboard. This allows, for example, the rotation speed of radiator fans to be automatically controlled depending on the water temperature. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Thread: G1/4" Thread Length: 4 mm Sensor Length: 8 mm 2-Pin Cable: 90 cm
The adapter in matt black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has an angle of 90 degrees. Technical Data: Material: Brass Colour: Matt Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
The adapter in matt black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has a 90 degree angle and can be rotated on the thread for easier tube alignment. Technical Data: Material: Brass Colour: Matt Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 100cm in length, 16mm in outer diameter and 12mm in inner diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 16 mm Inner Diameter: 12 mm Length: 100 cm Compatibility: EML series Bitspower connectors only
120mm Dual-Radiator von Corsair, Kupfer- und Messing-Aufbau, bis zu vier 120-mm-Lüfter in Push/Pull-Konfiguration, 55 Millimeter Dicke und 13 FPI, 2x G1/4-Anschlüsse
DEMCiflex Dust Filter 140mm Black/White DF0382Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 140 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Firstly, it is easy to see if cleaning is necessary again - as soon as the white filter fabric has a gray haze, you should do this task. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside of the fan frame. If one of the two arrows points towards the interior, it is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Figure 4 shows an example configuration on a housing (not included). As can be seen, the use of LED fans is possible because the transparent material hardly hampers the lighting. Technical details:Size (frame): 153 x 153 mmSize (filter): 129 x 129 mmCompatibility: 140 mm fan slotMaterial (filter): polyester meshColor: black (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
DEMCiflex Dust Filter 120mm Black/White DF0381Toote kirjeldus inglise keeles:Product description:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 120 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Firstly, it is easy to see if cleaning is necessary again - as soon as the white filter fabric has a gray haze, you should do this task. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside of the fan frame. If one of the two arrows points towards the interior, it is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Figure 4 shows an example configuration on a housing (not included). As can be seen, the use of LED fans is possible because the transparent material hardly hampers the lighting. Technical details:Size (frame): 128 x 128 mmSize (filter): 105 x 105 mmCompatibility: 120 mm fan slotMaterial (filter): polyester meshColor: black (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
PowerWalker AVR 1000 - Voltage regulator 1000VA Voltage Regulator 3x Schuko output receptacles Modem/Phone Surge Protection Overload, short circuit and over-temperature protection Compact size and stylist design Stylist design with colourful panels for your consideration 3 local receptacles for easy use Built-in thermal sensor for over-temperature protection and auto recovery system Capacity: 1000 VA/600 W Voltage: 220 / 230 / 240V AC Frequency Range: 50Hz Surge Rating: (LV/HV) 430/250 Joules Dimensions: 166 mm x 161 mm x 87 mm (TxBxH) The PowerWalker AVR 1000 is a voltage regulator which accepts wide input voltage range (180 -264V AC). It provides stable output voltage through boost and buck stabilizer. The built-in thermal sensor provides over-temperature protection and recover, while abnormal situation is eliminated. PowerWalker AVR 1000 includes a selectable Master/Slave function to reduce idle power wastage. Type Automatic Voltage Regulator Nominal Power (Watt) 600 Nominal Power (VA) 1.000 Schuko-Ausgang 3x Colour Black Width (mm) 161 Height (mm) 87 Depth (mm) 166 Weight (kg) 2,0
PowerWalker VI 1500 LCD is a Line-Interactive UPS which provides highperformance and reliable and cost-effective backup power protection. The UPS can be automatically started up without AC power supplied. In addition, this UPS provides RJ11/RJ45 surge protection, and green power function for energy saving.Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or SMB (small medium business) application.Super smart charger to shorten charging timeBuilt-in boost and buck AVRSimulated sine waveAuto restart while AC is recoveringOff-mode chargingCold start functionUSB communication port2x Schuko + 2x IEC outlets, RJ11/RJ45 surge protectionMonitoring software includedLCD display for status view Type Line Interactive USV (UPS) Nominal Power (Watt) 900 Nominal Power (VA) 1.500 Number of Batteries 2 Max. Überbrückungszeit (100W Last / Min.) 50 Display LCD Warnmeldungsanzeige Acoustical Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B Schuko-Ausgang 2x IEC-Ausgang 2x Colour Black Width (mm) 146 Height (mm) 205 Depth (mm) 397 Weight (kg) 10,7
PowerWalker VI 600 SW With its digitalized PWM-based controller PowerWalker VI 600 SW provides a pure sine wave output especially best suitable to protect modern PC like mini servers, gaming PC, point of sale (POS) systems and other electronic devices with APFC power supplies. Not only limited to APFC power supplies and equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment and is perfect for any home or small and medium office application 600VA Line-Interactive UPS with pure Sine Wave 3x IEC, RJ-11 and RJ-45 Surge Protection USB Connection for monitoring LCD display for status view Built - in boost and buck AVR function Technical Details: Capacity: 600VA / 360W Input Voltage 220/230/240VAC Voltage Range 162-290VAC Output Voltage: 220/230/240VAC Voltage Regulation (Battery Mode): ± 10 % Frequency: 50 or 60Hz Freq. Regulation (Battery Mode): ± 1 Hz (Battery Mode) Waveform: Pure Sine Wave Transfer Time Typical 2-6ms Battery Type: 12V / 7Ah Quantity: 1x Recharge Time: 4h to 90% LCD Display Indicators: AC mode, Battery mode, Load level, Battery capacity, Input voltage, Output voltage, Overload alarm, Fault alarm and Low battery alarm Audio Indicators: Battery Mode: Beep every 10 sec Low Battery: Beep every second Fault: Continuous Beep Battery is faulty: Beep every 2 sec UPS overload: Beep 2 times per secon Full Protection Discharge: Yes Overcharge: Yes Overload: Yes Short circuit: Yes Type Line Interactive USV (UPS) Nominal Power (Watt) 360 Nominal Power (VA) 600 Number of Batteries 1 Max. Überbrückungszeit (100W Last / Min.) 13 Display LCD Warnmeldungsanzeige Acoustical Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Ausgang 3x Colour Black Width (mm) 100 Height (mm) 145 Depth (mm) 328 Weight (kg) 5,2
Original part number BR700ELCD Product name Cyber Power Green Power UPS BR700ELCD (Schuko) Producer Cyber Power Class of product UPS Apparent power 700 VA Real power 420 Watt UPS architecture line-interactive Max. time of switching on battery 28 min Number and type of outlets with power maintenance 4 x SCHUKO Number and type of outputs with surge protection 4 x SCHUKO Input connector type Schuko Sustain time with full load no data Sustain time with 50% load no data Input voltage range for main operations 220-240 V Input voltage alternating range 165-290 V Cold start No (AVR) Automatic Voltage Regulation No Sine while working on battery No Communication ports USBRJ-45 serial Data line surge protection port N/A LED N/A Sound alarm Yes Type of computer case Small Form Factor Standard accessory manual (user quide)CD with software Software included PowerPanel Personal Edition Width 166 mm Height 118 mm Depth 288 mm Net weight 6.5 kg Colour Black
Hoiatussignaal: Aku režiim / Ülekoormus / Tühja aku indikaatorKuvatav informatsioon: Staatuse ja kontrolli konsoolSisendsagedus: 50/60 HzTüüp: Line Interactive
PowerWalker VI R1U Series offers slim design, which is unique on the market. It occupies only 1U of rack cabinet, but what is more, it can be fitted into places never before available for UPSs. It could even fit under your TV table to protect your home theater. Considering the fact that fan is completely switched off in normal operation and LCD dims automatically, neither noise nor LCD shine will disturb your experience. With pure sine wave output in battery mode it delivers high quality voltage for the equipment. HID support for USB port will allow communication with NAS without further compatibility issues.
Verbatim Secure Pro USB 3.0 USB DriveUSB devices have evolved into useful storage media. But with these advantages comes a danger - just one lost or stolen USB could prove disastrous, leaving private notes or financial data exposed.Highlights:Hardware-based 256-bit AES encryption with Security controller based hardwarePreloaded with an intuitive autorun security application for password protectionPassword hashing algorithmHack resistant password entry - erases data after 10 failed entry attemptsStrict authorisation policy - strict password rulesNo admin rights required on host PCEnhanced for Windows ReadyboostRetractable connector eliminated the inconvenience of capsVerbatim's Store 'n" Go Secure Pro delivers Premium 256-bit AES (Advanced Encryption Standard) hardware security encryption and integrated password protection on a USB drive, which enables the storing and carrying of confidential data while being protected from loss or hacking.The Store 'n" Go Secure Pro USB drive has many security features, including a password entry prompt, password hashing algorithm and a hack-resistant password entry that erases the data from the device after 10 failed access attempts.The retractable design of the Store 'n" Go family protects the USB connectors without the need for a cap. This means no more searching for lost caps in bags and pockets! Memory Capacity (GB) 16 USB Version USB 3.0 Form USB-A Max. Read Speed (MB/s) 100 Max. Write Speed (MB/s) 20 Material Plastic Colour Silver / Black Height (mm) 55 Length (mm) 20 Depth (mm) 95
Product kirjeldus: Team C183 - USB flash drive - 128 GB Product Type: USB flash drive liides Type: USB 3.1 Gen 1 Mälumaht: 128 GB Enclosure värv: must OS Required: Apple MacOS X 10.6 või uuem, Linux 2.6 või uuem, Microsoft Windows Vista / 7 / 8 / 8.1 / 10 Manufacturer Warranty: Limited eluaegne garantii
CORSAIR Hydro X Series XF Compression Fittings are the perfect fit for your soft tubing custom cooling system, available in a range of styles and equipped with an ultra-tight compression seal.
Product Type I/O Module|2xRJ45|Operating temperature range 0 ° C ... 40 ° C|Colour Black|Dimensions 85 x 44 x 30 mm Product Type I/O Module RJ45 2 Operating temperature range 0 ° C ... 40 ° C Colour Black Dimensions 85 x 44 x 30 mm Shipping box quantity 1 Unit Brutto Volume 0,0003465 cubm Unit Net Weight 0,2 kg Unit Gross Weight 0,1 kg
Looking for a great connection?With MicroConnect you get:- Great products at a great value- 25 years warranty- Short delivery time- Easy access to the part you want through our cable guidePortide hulk24Toote värvMustPüstikmontaažJahPüstiku mahutavus1U
