Ethernet Surge Protector 8p in a rack housing operating in AT / AF standard.The device allows the addition of PoE power in the UTP and FTP twisted pair and at the same time provides effective protection of devices working in the Ethernet network against harmful electrostatic discharges and overvoltages. It provides device protection - with a connection rate up to 1 Gb / s inclusive - compatible with the PoE AT / AF standard allowing you to select the A / B power supply method / options . Protects each cable in a four-pair cable by discharging any load to the ground. It signals the selected power method with LEDs. It is an effective and cost-effective solution before the destruction or damage of protected devices. Ethernet Surge Protector collects inductive loads in the network and safely leads them to ground which effectively prevents damage caused by overvoltages. The aesthetic powder-coated aluminum housing in white is ideally suited to the design of devices from the Cloud Core Router series by MikroTik. Rack holders give the possibility of mounting a compartment's stain. Expandable with additional Ethernet modules Surge Protector SPG-8P. Protection of 24 ports at maximum expansion. Key features:Number of LAN ports - 8 x 10/100 / 1000MbpsNumber of PoE ports - 8 x 10/100 / 1000Mbps Supply voltage - 12-54VDCMaximum voltage PoE - 54Vpower supply via twisted pair - (4.5 +) ( 7.8- )Maximum current drawn from one port - 1ACurrent at which the port is closed -1.4Protected pairs - 1-2 3-6 4-5 7-8Slot type - RJ-45 shieldedDimensions - 485mm x 110mm x 45mm Length of the earthing cable - 30cmWeight - 0.725kg
This front panel by Delock can be mounted in a 19″ splice box by Delock. Specification • Connectors: 24 x SC Duplex female > 24 x SC Duplex female • Colour: green • For 48 OS2 Single-mode fibers • Zirconia ceramic ferrule with protection cap • For mounting in 19″ splice box, 1U • Housing colour: black • Dimensions (LxWxH): ca. 482.6 x 44.0 x 44.0 mm System requirements • Delock 19″ Fiber Optic Splice Box 43348 Package content • 19″ splice box front panel
Seda Delocki moodulit saab kasutada telefonikaabli ühendamiseks RJ12 emasportiga. Tänu oma standardiseeritud mõõtmetele saab seda kasutada lihtsaks sisselõikamiseks, nt Keystone-pastapaneelile, näoplaadile või pinnapealsele paigalduskarbile. Spetsifikatsioon Liitmikud: välised: 1 x RJ12 (RJ25) pesa (6P/6C) >. sisemine: LSA (tööriistavaba) Ühildub RJ11 (6P/2C) ja RJ14 (6P/4C) pistikutega. Varjestamata (UTP) Kuni 0,511 mm (24-26 AWG) tugevale või mitmekordsele juhtmele. 19,2 x 14,9 mm keystone-portide jaoks Värv: valge Mõõtmed (LxSxK): ca. 27,4 x 19,8 x 19,8 mm Pakendi sisu Keystone-moodul Kaablihaldur
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca
The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission. Type: RJ45 Cat5 Plug Style: Solid UTP Plug Materials: Contactl: Phospor Bronze Contacts: Gold Flash over Nickel underplate. Housing: Polycarbonate Package include 1pc.
