Trust Nado II Multi-device Bluetooth Keyboard on kompaktne juhtmevaba klaviatuur, mis võimaldab mugavalt kasutada kuni kolme seadet korraga. Vaiksed klahvid ja õhuke disain sobivad hästi nii tööks kodus kui liikvel olles. • Ühendus kuni 3 seadmega • Bluetooth juhtmevaba ühendus • Kompaktne ja õhuke disain • Vaiksed madalprofiiliga klahvid • Sobib erinevatele operatsioonisüsteemidele
Dust can be a computer system’s worst enemy as it has the potential to lower cooling performance or cause damage when left overly accumulated. But most fan filters are a hassle to install so SilverStone created an easy to use FF141 fan filter.The FF141 has embedded magnet in its frame so it can be effortlessly attached to any steel chassis without tools. Its 140mm size is also compatible with most 120mm fan vents so it can be used in many places that require filtering. In addition to filtering dust, the FF141’s grille can reduce noise associated with air turbulence. So for those looking for dust reduction for component longevity with increased cooling efficiency, the FF141 is an excellent buy.Technical detailsMaterial ABS syntheticsColour of product BlackWeight & dimensionsWeight 22 gWidth 140 mmDepth 140 mmHeight 3 mmOther Featuress1
Tootekirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black straight adapter of 3/8 inch OD to G1 / 4 inch female, designed specifically for the inputs of the Eheim 1046 and 1048 pumps and the 1250 output. Before screwing in the adapter, the sealing ring should be coated with a lubricant, as otherwise it could be pulled out of its groove and exerts too much pressure on the plastic ring of the pump in the upper area. Alternatively, it is sufficient not to fully screw the adapter, but only up to the rubber itself. Technical Details:Material: brassColor: matt blackThread: G1 / 4 inch (internal thread)Compatibility: EHEIM 1046 (inlet) EHEIM 1048 (inlet) EHEIM 1250 (outlet)
Water and electronics are not known to be compatible. To ensure that the separation between the two areas remains 100%, even with beloved water cooling, the sealing rings at the connections should be changed regularly. Although they have a long life, similar to vehicle tires, they lose their elasticity over time and become brittle. What leads to reduced grip on the road and provokes accidents in case of doubt, can also cause problems for the Wakü if a system becomes leaky. In addition to the contact of the water with the electronics, especially the sinking water pressure, the higher volume due to air inside the system and, in case of doubt, the total failure of the cooling are a considerable risk for the expensive hardware. With this set of many O-shaped sealing rings even extensive systems can be retreaded. The inner diameter requires use for G1 / 4 inch external thread. These are the most common thread standard, so that with few exceptions almost all screw threads can be sealed. Take care! Technical details:Material: rubberFor: G1 / 4 inch external threadContent: about 50 pieces
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight and matte black G1 / 4 "fitting for 7/16" or 11mm ID hoses in the Real Hi-Flow design. Since no union nut is used, any tube thickness and thus outer diameter can be used. To fix the hoses on the connection, we recommend a cable tie or a hose clamp as a precaution. Note: We recommend a 15 mm open-end wrench for installation and removal of the connection. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: BrassColor: matt blackThread: G1 / 4 inchesSuitable for: 11 mm hose (inner diameter)
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 100cm in length, 14mm in outer diameter and 11mm in inner diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 14 mm Inner Diameter: 11 mm Length: 100 cm Compatibility: EML series Bitspower connectors only
The final touch for a perfect PC You spend a lot of time to make your PC perfect. You’ve upgraded it for top performance, ultimate quietness, and unbeatable reliability. So what’s next? Our premium upgrade Power Cables, that’s what’s next. High quality, premium function, and flat out good looks come together in our line of premium Power Cables, intended for use with your high capacity be quiet! cable management power supply. These sleeved beauties in black are available in 8 S-ATA models for maximum convenience and compatibility with all type of cases, and come with a 3 year warranty. Mix and match lengths and connector arrays to achieve the perfect combination of stylish good looks, improved cooling airflow, and peripheral device support.
The connection of EK Water Blocks is for 16/10mm hoses, consists of nickel-plated brass and serves as a compression fitting. It is in the colour silver and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hose. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Silver Nickel Supported Tube: 16/10 mm Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 23 mm Installed Height: 19 mm Compatible Soft Tubing: PVC, EPDM, Norprene, Silicone and most other flexible tubes
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 90° compression fitting 16mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 16mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: deep black Dimensions Length: 45mm Width: 29mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting 90° rotatable G1/4 for plexi- brass tubes - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Double nippleThis adaptor has a 1/4" outer thread on each side. It could be used to connect two sockets with 1/4" inner threads, for example. Technical Details Material: brass Colour: black Dimensions Length: ca. 15mm Diameter: 18mm Scope of Delivery 1x Alphacool Eiszapfen double nipple G1/4 outer thread to G1/4 outer thread - black Fitting MapYou can find an interactive map of all Alphacool fittings here.
Koolance QD3 quick release straight female to 16/10mm - silver Koolance is renowned among enthusiasts for its outstanding quality and top-notch design. Koolance offers a wide selection of water cooling components – from heat sinks, radiators, and pumps to high-quality fittings and tubing. A particular highlight is the QD series of quick release connectors, which provide maximum flexibility and convenience when connecting and disconnecting your cooling loop. With just a single action – simply pressing down a metal ring – the connection is released without needing to drain the entire loop. This makes them perfect for frequently swapping components or for easily transporting external radiators. Why choose Koolance quick release fasteners? Quickly disconnect and connect without tools Minimal leakage thanks to no-spill technology (max. 0.2 ml fluid loss) Perfect for modular water cooling – ideal for enthusiasts and overclockers High-quality materials – black lacquered brass for durability The Koolance QD3 series consists of a male and female connector that securely attach to each other. This model is the silver straight female version with a 16/10mm hose connection , suitable for most water cooling systems using 16/10mm tubing. The hose is attached and secured with a compression fitting on this Koolance QD3 quick release connector. Maximum compatibility – easy operation – professional quality. Perfect for anyone looking to keep their water cooling system flexible!
No-spill quick disconnect (QD3) with a straight male design by Koolance, made of brass, and finished in silver. This compression fitting is suitable for 13/10 mm tubing. Its quick disconnect feature minimizes fluid loss during disconnection. Net weight: 0.0750 kg.
This water cooling fitting features a 45-degree tilt and a rotatable design for flexible installation. It comes with a G1/4-inch male thread connecting to a 45-degree G1/4-inch female thread. Made of copper, it ensures durability and efficient heat transfer. The elegant platinum gray finish adds a refined touch to your cooling setup. Net weight: 0.0730 kg.
Jet-Engine Design Meets High-End Cooling Performance – The Zalman ZET 5 - Black With the black Zalman ZET 5, Zalman introduces a spectacular air CPU cooler to the market that stands out not only for its jet engine-inspired design but also for its outstanding cooling performance. Equipped with two magnetically mounted 120 mm fans – one of which runs in reverse for High-Efficiency Dual-Directional Cooling, five heatpipes, and intelligent ARGB lighting, this cooler is a perfect match for any PC setup or high-performance workstation. Powerful & Efficient – Up to 200 W TDP Combining Reverse Direct Touch Heatpipe (RDTH) technology, a soldered copper baseplate, and 53 aluminum fins, the ZET 5 maximizes heat transfer from your processor. Supporting up to 200 watts TDP, it's ideal for the latest high-end AMD and Intel CPUs. Magnetic Fans & ARGB – A New Take on Installation Both 120 mm fans of the Zalman ZET 5 are magnetically attached – a clever solution that saves time and simplifies cable management. Integrated ARGB LEDs can be easily controlled via a compatible motherboard, adding stylish lighting effects inside your case. Technical Highlights at a Glance Air CPU cooler with unique jet-engine design 5 nickel-plated heatpipes with soldered copper base (RDTH technology) Compatible with Intel LGA1851 / 1700 / 1200 / 115X & AMD AM5 / AM4 2× 120 mm hydro-bearing fans (magnetically mounted, Pogo-pin connection) ARGB lighting controllable via 3-pin motherboard header Fan speed: 600–2000 RPM ±10 % / Noise level: up to 30.4 dB(A) Dimensions: 130 × 117 × 158 mm / Weight: approx. 970 g Includes ZM-STC10 high-performance thermal paste
