Arvutikomponendid

The EK-Quantum Vector RX 6800/6900 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RX 6800, RX 6800XT and RX 6900 graphics cards. The Vector RE water block directly cools the GPU, the VRAM and the VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made entirely of black durable POM acetal. The end piece of the cooler has D-RGB lighting, with a total of 6 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB Sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 283 x 139 x 16.5mm (L x H x W) Material: Nickel-Plated Copper, Acetal Threads: G1/4" Scope of Delivery: EK-Quantum Vector RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility AMD Radeon RX 6800 AMD Radeon RX 6800 XT AMD Radeon RX 6900 XT ASROCK Radeon RX 6800 16GB (visual) ASROCK Radeon RX 6900 XT 16GB (visual) ASUS Radeon RX 6800 XT 16GB(visual) ASUS Radeon RX 6800, RX6800-16G, 16GB GDDR6 (90YV0FY0-U0NA00) (visual) ASUS Radeon RX 6900 XT 16GB (RX6900XT-16G) (visual) BIOSTAR Radeon RX 6900 XT 16GB (visual) GIGABYTE Radeon RX 6800 16GB (visual) GIGABYTE Radeon RX 6800 XT 16GB (visual) Gigabyte Radeon RX 6900 XT, 16GB GDDR6, HDMI, 2x DP, USB-C (GV-R69XT-16GC-B) (visual) MSI Radeon RX 6800 16GB (visual) MSI Radeon RX 6800 XT 16GB (visual) MSI Radeon RX 6900 XT 16GB (visual) POWERCOLOR Radeon RX 6900 XT 16GB (visual) SAPPHIRE Radeon RX 6800 16GB (visual) SAPPHIRE Radeon RX 6900 XT 16GB (21308-01-20G) (visual) SAPPHIRE RX 6800 XT 16GB (visual)

The EK-Quantum Vector RX 6800/6900 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RX 6800, RX 6800XT and RX 6900 graphics cards. The Vector RE water block directly cools the GPU, the VRAM and the VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of copper, while the top is acrylic. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 283 x 139 x 16.5mm (L x H x W) Material: Copper, Acryl Threads: G1/4" Scope of Delivery: EK-Quantum Vector RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility AMD Radeon RX 6800 AMD Radeon RX 6800 XT AMD Radeon RX 6900 XT ASROCK Radeon RX 6800 16GB (visual) ASROCK Radeon RX 6900 XT 16GB (visual) ASUS Radeon RX 6800 XT 16GB(visual) ASUS Radeon RX 6800, RX6800-16G, 16GB GDDR6 (90YV0FY0-U0NA00) (visual) ASUS Radeon RX 6900 XT 16GB (RX6900XT-16G) (visual) BIOSTAR Radeon RX 6900 XT 16GB (visual) GIGABYTE Radeon RX 6800 16GB (visual) GIGABYTE Radeon RX 6800 XT 16GB (visual) Gigabyte Radeon RX 6900 XT, 16GB GDDR6, HDMI, 2x DP, USB-C (GV-R69XT-16GC-B) (visual) MSI Radeon RX 6800 16GB (visual) MSI Radeon RX 6800 XT 16GB (visual) MSI Radeon RX 6900 XT 16GB (visual) POWERCOLOR Radeon RX 6900 XT 16GB (visual) SAPPHIRE Radeon RX 6800 16GB (visual) SAPPHIRE Radeon RX 6900 XT 16GB (21308-01-20G) (visual) SAPPHIRE RX 6800 XT 16GB (visual)

Asus 90YE00A2-B0NA00

The EK-Quantum Vector FE RTX 3070 backplate is designed for the EK-Quantum Vector RTX FE 3070 graphics card cooler of the same name. A backplate is particularly suitable for giving the graphics card more stability. Since the backplate is kept very simple, it is rounded off by a small but elegant EK logo. Technical Data Material: Nickel-Plated Aluminium Color: Nickel Scope of Delivery EK-Quantum Vector FE RTX 3070 Backplate - Nickel Mounting mechanism (the backplate screws are on the other side - separate compartment) Thermal pads

EK-Quantum Vector Strix RTX 3070 D-RGB from EK is a complete cooler for the ROG Strix RTX 3070 from ASUS. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The nickel-plated copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure results in very efficient and reliable cooling. Visually, the cooler is rounded off with a transparent acrylic glass lid and a black end piece. The integrated RGB lighting sets the scene perfectly for the EK Quantum. In addition, the cooler has four G1/4" connections. The graphics card cooler is compatible with the common RGB synchronisation technologies of all major mainboard manufacturers. Technical Data Dimensions: 293 x 154 x 16,5 mm Material Base: Nickel-Plated Copper Material Cover: Acryl Thread: 4x G1/4" D-RGB cable length: 500mm D-RGB LED count: 6 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Compatibility ASUS ROG Strix RTX 3070 Scope of Delivery EK-Quantum Vector Strix RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

The EK Quantum Vector RE RTX 3070 from EK is a complete cooler for the Founders Edition of the RTX 3070 from Nvidia. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The nickel-plated copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure results in very efficient and reliable cooling. Visually, the black acetal lid stands out, which is rounded off by a metallic trim. In addition, the cooler has four G1/4" connections, which, however, are found on the short side instead of on the upper long side as usual. Technical Data Dimensions: 205 x 98 x 21 mm Material Base: Nickel-Plated Copper Material Cover: Acetal Thread: 4x G1/4" Compatibility NVIDIA GeForce RTX 3070 (Founders Edition) Scope of Delivery EK-Quantum Vector RE RTX 3070 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

Alphacool 11946

With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer. Technical specifications: Base plate material: nickel-plated electrolyte copper Material cover: acrylic glass Cover material: annealed stainless steel Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x HEATKILLER® LED Strip aRGB 1x mounting material Thermal Grizzly Kryonaut thermal paste

The EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Nickel Backplate is made of aluminum. This ensures improved cooling. Technical specifications: Material: aluminum Silver Weight: Dimensions: 307.62 x 128 x 5.2mm Scope of delivery: EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Nickel

The EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Black Backplate is made of aluminum. This ensures improved cooling. Technical specifications: Material: aluminum Color: Black Weight: Dimensions: 307.62 x 128 x 5.2mm Scope of delivery: EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Black

With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acrylic glass Cover material: black anodized aluminum Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste

With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. Technical specifications: Base plate material: electrolyte copper Material cover: acrylic glass Cover material: annealed stainless steel Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x mounting material Thermal Grizzly Kryonaut thermal paste

Drei 120-mm-PWM-Lüfter in Schwarz, sehr leiser Betrieb mit 23,8 dB(A), adressierbare RGB-Beleuchtung, Drehzahl von 1.500 U/min, max. 59,8 m³/h Fördervolumen, max. 1,04 mmH2O statischer Druck

PERFEKTE LÜFTER-REGULIERUNG DURCH PWM Die PWM-Funktion signalisiert über das Motherboard genauestens mit welcher Geschwindigkeit der Lüfter laufen muss. Damit wird eine maximale Kühlleistung bei minimalem Geräuschpegel garantiert. PWM SHARING TECHNOLOGY (PST) SENKT DEN GERÄUSCHPEGEL Durch die PST Funktion wird sichergestellt, dass alle Gehäuselüfter auf ein Signal arbeiten. Somit können alle Gehäuselüfter einheitlich eingestellt werden. INNOVATIVES DESIGN FÜR LEISE UND EFFIZIENTE BELÜFTUNG Durch das innovative Design der Lüfterblätter wird der Luftfluss verbessert und somit ist die Belüftung positiv beeinflusst. Das Lüfterrad wurde mit dem Fokus auf einen minimalen Geräuschpegel entworfen und bietet einen verbesserten Luftfluss und Druck. LANGE BETRIEBSDAUER Das Gleitlager ist mit einer hydrodynamischen Öl-Kapsel ausgestattet, somit wird vermieden, dass das Schmiermittel nicht verloren geht. Aus diesem Grund ist dieses Lager so leise wie ein Gleitlager hat aber eine wesentlich höhere und längere Betriebsdauer.

SILENTIUMPC Nano Reset Remote ARGB Kit

Fan speed (max): 1500 Fan speed (min): 400 Air flow rates: 47.73 Number of fans: 3 Noise: 28 Weight: 377

92 mm PWM Lüfter, mit Sealed Precision FDB-Lagern für hohe Lebensdauer & Laufruhe, 300 - 2.300 U/Min bei 7,3 - 28,83 dB(A), 11,5 - 83 m³/h Airflow, 0,8 - 2,03 mmH2O Luftdruck

Phobya Distance 7mm, 140mm fan (38205)

Thermaltake's Pure Duo 14 ARGB Sync is a PWM controlled fan with addressable LEDs and 16.8 million colours. Radiators in particular benefit from its very quiet operation and low heat generation thanks to the self-lubricating hydraulic bearing. The 9-blade design allows a very high airflow and efficient cooling. The anti-vibration pads also ensure low noise levels. As the sealing cap prevents the lubricant from escaping, a long service life is also guaranteed. The two rings, each with nine addressable LEDs, are independent of each other and impress with an even light coverage and high colour intensity. The extensive effects give your housing the finishing touch and give it a unique look. Using the included controller, which does not require a 5V ARGB port, seven breathtaking effects can be selected. Alternatively, the fans can be connected to a 5V ARGB port on the mainboard and synchronised via compatible software such as AsRock Polychrome, ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync. Technical Data: Dimenson: 140 x 140 x 25 mm Interface: Fan 2510-4P, LED 5V RGB Header Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V and 5 V Rated current: 0.17 A, LED 0.28 A Power Input: 12V – 5.76 W, 5V – 2.8 W Fan Speed: 500 - 1500 rpm Max. Air Pressure: 2.24 mm-H2O Max Air Flow: 82.23 CFM Noise: 33.5 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 209 g

Thermaltake's Pure A14 is a PWM controlled LED fan available in four different colours: blue, green, red and white. Especially radiators benefit from the very quiet operation and low heat generation thanks to the self-lubricating hydraulic bearing. The anti-vibration pads also ensure low noise levels. As the sealing cap prevents the lubricant from escaping, a long service life is also guaranteed. The nine LEDs of the fan impress with a uniform brightness and high colour intensity and give the PC system the final touch. Technical Data: LED colour: White Dimenson: 140 x 140 x 25 mm Interface: 4-Pin PWM Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V Rated current: 0.27 A Power Input: 3.24 W Fan Speed: 500 - 1500 rpm Max. Air Pressure: 2.05 mm-H2O Max Air Flow: 93.15 CFM Noise: 32 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 176 g

Azza LCAZ-360R-ARGB

The MasterLiquid ML120L RGB V2 from Coolermaster is a further development of the MasterLiquid Lite series. The dual-chamber pump of the ML120L RGB V2 has been redesigned to provide even more power and cooling efficiency with quieter operation. The radiator has also been upgraded, with the cooling surface increased by 25%, resulting in better heat dissipation. The fans have been equipped with the latest SickleFlow design, which makes them even quieter than before and cools the radiator effectively. The lighting can be controlled with the included RGB LED controller or via compatible mainboards. Technical Data Exterior Color: White CPU Socket: Intel : 2066, 2011-v3, 2011, 1151, 1150, 1155, 1156, AMD : AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1 Radiator Material: Aluminum Radiator Dimensions: 277 x 119,6 x 27,2 mm / 10,9 x 4,7 x 1,1 inch Pump Dimensions: 79,9 x 76 x 47,1 mm / 3,1 x 3 x 1,9 inch Pump MTTF: 70,000 Hours Pump Noise Level: < 15 dBA Pump Connector: 3-Pin Pump Rated Voltage: 12 VDC Pump Power Consumption: 2.36W (LED 2.21W) Fan Dimensions (L x W x H): 120 x 120 x 25 mm / 4,7 x 4,7 x 1 inch Fan Quantity: 2 PCS Fan LED Type: RGB Fan Speed: 650-1800 RPM ± 5% Fan Airflow: 62 CFM (Max) Fan Noise Level: 8 - 27 dBA Fan Pressure: 2.5 mmH₂O (Max) Fan Life Expectancy: 160,000 Hours Fan Power Connector: 4-Pin (PWM) Fan Rated Voltage: 12VDC Fan Rated Current: 0.15A (LED 0.2A) RAM Clearance: N/A Warranty: 2 years Series: MasterLiquid Lite Cooler Type: Liquid Cooler Radiator Size: 240

be quiet! Shadow Rock 3 protsessor cooler Product Type: protsessor cooler Package Content: Thermal paste, kruvikeeraja, mounting hardware värv: valge Compatibility: Socket AM3, LGA1155 Socket, Socket AM3+, LGA1150 Socket, LGA1151 Socket, LGA2011 (Square ILM) Socket, LGA2011-3 (Square ILM) Socket, Socket AM4, LGA2066 Socket, LGA1200 Socket Heatsink Material: Aluminium koos copper base Fan Diameter: 120 mm Fan kõrgus: 25 mm Fan Bearing: Rifle bearing pöördekiirus: 1600 pööret minutis müratase: 11.5/17.5/24.4 dBA Power ühenduspesa: 4-pin fan connector nominaalpinge: 12 V Features: Heat-pipe Direct Touch (H.D.T.) Technology, Pulse-width modulation (PWM) tugi, 5 heatpipes (6 mm) mõõtmed (WxDxH): 13 cm x 12.1 cm x 16.3 cm kaal: 714 g Features: Asymmetrical design, Kuni 190W Thermal Design Power (TDP) Manufacturer Warranty: 3-year garantii

Premium-AIO-Kühlung in Schwarz, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 360-mm-Radiator, drei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design & leiser Betrieb, mit Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel zu vielen AMD & Intel Sockeln

Premium-AiO-Kühlung in Schwarz, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 240-mm-Radiator, zwei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design und leiser Betrieb, inkl. Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel mit vielen AMD- und Intel-Sockeln

Cooler Master MGZ-NDSG-N15M-R2

Profi-CPU-Wasserkühler von EKWB, Kühlerboden aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, speziell für AMD AM4-Sockel, hochwertige Verarbeitung und edles Design, modulare Konstruktion mit austauschbaren Komponenten, integrierte D-RGB-Beleuchtung

The EK-Classic CPU Water Block 115x/20xx D-RGB, is a high-quality CPU water block of the top class for current Intel processors. It is characterised by a classic, elegant design, which is perfectly suited to the needs of enthusiasts and demanding users! The cooler is rounded off by the addressable D-RGB LED lighting and the CNC-milled, high-quality acrylic glass top. This product is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The arrow marking on the 3-pin LED connector must be aligned with the +5V marking on the D-RGB (A-RGB) header. You can easily remove the LED strip cover, which is fixed with two screws, to replace the LED strip with another type of LED strip of your choice. Technical specifications: D-RGB cable length: 30cm D-RGB connector standard 3-pin (+5V, Data, Empty, Ground) CPU socket compatibility: Intel LGA-1200 Intel LGA-1150/1151/1155/1156 Intel LGA-2011(-3) Intel LGA-2066 Enclosed: EK-Classic CPU Water Block 115x/20xx D-RGB CPU block

OPTIMISED FOR STATIC PRESSURE During the development of the new BioniX P120, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P120 is particularly suitable for use on heatsinks and radiators. STRONG COOLING PERFORMANCE Numerous improvements, such as an updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new BioniX P120 to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 200 TO 2100 RPM REGULATED VIA PWM PST With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX P120 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 2100 rpm Airflow: 67.56 CFM/ 114.9 m³/h Static Pressure: 2.75 mm H₂O Noise Level: 0.45 Sone Operating Ambient Temperature: 0 - 40 °C Fan Fan Frame: BioniX Control Type: PWM PST Connector: 4-Pin-Connector + 4-Pin-Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 4.3 V Current/ Voltage: 0.13 A / 12 V Cable Lenght: 400 mm Size & Weight Lenght: 120 mm Width: 120 mm Height: 27 mm Weight: 140 g

Single-Tower-Kühler in Schwarz, 1x 120 mm großer PWM-Lüfter, vier 6-mm-Heatpipes, schmales Design für hohe RAM-Kompatibilität, für bis zu 180 W TDP

Rubber Fan Mounts

The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket. With the optional XPX Pro AM4 mounting bracket, the Alphacool Eisbaer Pro CPU cooler can also be used on AMD Ryzen processors. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the additionally available AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Copper radiator As per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen. Real water cooling The Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system. Fan and lighting The entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 140mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 2.20 mm/H 2 O and offers a max. air flow of 154.1 m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible. How to connect everything The fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Technical data radiator L x W x H 460 x 144 x 30 mm (+/- 3% in the range of the pre-chambers) Material fins, chambers & channels copper Material threads brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 140 mm Fan mounting options 3 x one-sided / 3 x both-sided Technical data cooler and pump L x W x H 64 x 79 x 54,3 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Number of LEDs 10x Digital RGB LEDs Pump typ DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Technical data fans Speed 0 - 2000 RPM Static pressure 2,20 mm H 2 O Air flow rate 154,1 m³/h Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 140 x 140 x 25 mm

You may have already seen the Alphacool Eiszyklon Aurora LUX Pro fan on the Alphacool Eisbaer Aurora series. It offers a wide control range as well as outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects. Ingenious Lighting The frame is equipped with digital addressable 5V RGB LEDs which illuminate the whole frame. The frame is not completely transparent, but the illumination is done through narrow slits in four places. On the upper side there are two rows of these slits. Each narrow frame runs along the inside and outside of the frame. This creates a unique illumination which looks very noble. Thanks to the recessed light diffusers the light is distributed evenly. This means that Individual LEDs are no longer visible. Wide Control Range and Silent The fan can be controlled via the 4-pin PWM connector between 600 and 1500rpm. At 600 rpm the fan is almost silent, but still of-fers a good airflow rate as well as a high static pressure. Therefore, the fan can also be used very well on radiators for a water cooling system. Thanks to the high airflow, the fan is also ideal for ventilating a case. Decouplers are also found directly on the frame. The soft foam padding reduces the transmission of vibrations to the case. A further plus point for the silent capability of the fan. Connections? The fan is controlled via a 4-pin PWM connector. The cable is 50 cm long. This allows the fan to be connected to the mainboard or a special controller without any additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector. Tecinal data: Size: 140 x 140 x 25 mm Speed: 600-1500 rpm Static pressure: 1,6 mm H2O Air flow: 71 m³/h Bearing: Hydraulic Fan connector: 4-Pin PWM RGB connector: 3-Pin JST + 3-Pin 5V LEDs: Adressable 5V Digital RGB LEDs Quantity Digital aRGB LED: 16 Power consumption: 2 W Noise: 12-38 dB(A) MTBF: 50.000 h

Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 40cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter