In addition to a modern look with a compact form factor, spiral cable and RGB lighting, the Sharkoon SKILLER SGK50 S4 Gen2 PBT offers the latest linear switches from the specialist Gateron as well as keycaps made of high-quality and abrasion-resistant PBT. As usual with the series, key caps and switches can of course be changed almost as desired and, thanks to the open source software VIA and QMK, all of the keyboard's functions can be adjusted. For a high-quality typing experience, the SKILLER SGK50 S4 Gen2 PBT is not only equipped with the latest generation of yellow G-Pro switches, but also with abrasion-resistant keycaps and high-quality PBT. If you would like to customize your typing experience, you can use any switches with 3 and 5 pins in addition to new key caps - assembly tools are already included. The SKILLER SGK50 S4 Gen2 PBT is particularly visually distinguished by its slim form factor of 60% of a 3-block keyboard. However, thanks to the double assignment of important keys, functionality does not have to be sacrificed. To ensure that the keyboard sounds as good as it looks, the SKILLER SGK50 S4 Gen2 PBT has a positioning plate made of polycarbonate and double-layer silicone damping for a rich, muffled sound without shrill noise. Like all keyboards in the SGK50 series, the S4 Gen2 PBT comes with a removable spiral cable for a particularly casual look on the desk. Type gaming keyboard Color black EAN 4044951041930 SKILLER SGK50 series Suitable for PlayStation 5, PlayStation 4, PC, notebook Application area gaming Connection type cable Connection cable length 1.5 meters Connection port 1x USB Layout German Format 60% Keyboard keys main Keyboard button/switch technology Keyboard switch type Keyboard switch characteristics Keyboard trigger pressure Keyboard trigger path Keyboard lifespan Keyboard hot-swappable Keyboard features n-key rollover, macro programming Keyboard lighting Single key lighting, RGB Keyboard onboard storage capacity Keyboard polling rate 1,000 Hz Keyboard feet, tilt-adjustable, rubberized Keyboard cable spiral cable, gold-coated USB plug, removable, textile-coated Special features PBT keycaps, dye-sub lettering, double-layer silicone cushioning, positioning plate made of polycarbonate, QMK and VIA compatible Supported operating systems Windows Accessories available Additional keycaps, keycap puller, switch puller, USB cable (150 cm) Dimensions Width: 293mm x Height: 27mm x Depth/Length: 103mm Weight 778 grams
The CORSAIR iCUE Link RX120 RGB Triple Starter Kit is a comprehensive solution for enhancing the cooling and aesthetics of desktop computers and servers. This kit includes three 120 mm fans, designed with CORSAIR AirGuide technology for precise airflow direction, ensuring efficient cooling. The fans feature magnetic bearings for quiet operation and durability, with a noise level range of 10 - 36 dBA. With Pulse-width modulation (PWM) support and Zero RPM fan mode, users gain advanced control over fan speeds, allowing for a perfect balance between cooling efficiency and noise. Additionally, the kit's RGB lighting capabilities, managed through the Corsair iCUE software, offer vibrant, customizable lighting options to complement any system modding project. The package also includes a mounting kit, making installation straightforward. Certified with multiple compliance standards, including RoHS and UKCA, this kit is a reliable and visually appealing choice for system builders and enthusiasts alike.
Darkflash TH285M computer case (white)The Darkflash TH285M chassis is a sleek, compact design for gamers and PC gamers looking for the perfect balance of aesthetics, functionality and performance. Three glass panels provide full visibility of the interior, while compatibility with M-ATX and ITX motherboards and support for up to six fans and a 360mm radiator make it a great base for high-performance and stylish PC sets. It's an option for those looking for a case that stands out in both looks and capabilities.Transparent design on three sidesThe case is distinguished by as many as three transparent panels made of tempered glass, which allow you to easily view every detail of your setup. The transparent design not only enhances the aesthetics of your components, but also allows you to easily check the status of your components and cooling efficiency. The thumb screw-mounted side panel facilitates quick access to the case's interior. From now on, your workspace will impress with its futuristic design.Compatibility and space for componentsThe Darkflash TH285M supports M-ATX and ITX format motherboards, offering great flexibility when building a kit. The interior is designed to accommodate larger-sized components - the maximum height of the CPU cooler is 160 mm, and the length of a graphics card can reach up to 415 mm. Thanks to five PCI slots, the installation of even extensive graphics cards runs smoothly.Advanced cooling capabilitiesThe TH285M is designed with optimal airflow in mind. It supports up to six 120 mm or two 140 mm fans, as well as 360 mm water cooling. This configuration keeps temperatures low even under intense system load, making this chassis ideal for gamers and developers who require stable operation of their components.Convenient access to portsOn the front panel, you'll find a clear and organized layout of ports, including one USB 3.0 and two USB 2.0 connectors for quick access to transfer data and charge peripherals. This makes connecting accessories and external memory fast and convenient.Ready for expansionThe well-thought-out, spacious interior layout makes it easy to install and later upgrade the kit. The case is equipped with the INF24T Black fan and is compatible with the D21 Black CPU cooling, providing a solid starting point for further system expansion. With easy cable management and plenty of space inside, assembling the computer is a breeze. It's the perfect choice for any gamer, graphic designer, or computer enthusiast. ManufacturerDarkflashModelTH285MHousing typeMidi TowerSide panelTempered glassMotherboard standardITX, M-ATXPower supply standardAt the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x3Expansion card slots5Max PSU length240 mmMax length of graphics card415 mmMax height of CPU cooler160 mmMax number of fans6Fan mounting optionsRear: 120 mm x1; Side: 120 mm x2/140 mm x2; Bottom: 120 mm x3Water cooling mounting optionsSide 280 mm, 280 mm; Bottom 240 mm, 360 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.7 mm SPCCColorWhiteHeight373 mmWidth285 mmDepth426 mm
Micro-ATX case, innovative front-mounted power supply, GPU support up to 430mm, space for up to seven 120mm fans, dedicated radiator chamber, glass panels on front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines a compact design with generous room for modern hardware. With stylish glass panels and robust cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: supports back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Ample Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide variety of gaming or professional setups—while still offering excellent support for modern hardware. The spacious interior accommodates Mini-ITX and Micro-ATX motherboards and supports back-connect designs. High-performance GPUs fit easily as the Phanteks XT V3 provides four PCIe slots and space for GPUs up to 430mm. The rear chamber impresses with an innovative design for premium hardware. Instead of the usual position, the PSU is relocated to the top front. This enables the Phanteks XT V3 to support full-sized ATX power supplies, ensuring greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. Seven mounting points for 120mm fans—three at the top, three at the bottom, and one at the rear—enable efficient airflow layouts. Out of the box, three powerful M25-120 reverse DRGB fans at the base provide excellent cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a high-performance AIO cooler, keeping even high-end CPUs reliably cool during the most intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can perfectly display both your hardware and your building skills. The rear chamber offers ample space for cable management along with smart routing options for a tidy system. Completing the look are tempered glass panels on the front and side, providing an unobstructed view of your components from any angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides excellent support for your gaming setup thanks to its front I/O panel on the bottom right. It features both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for your gaming headset.
The IPC 4U-4708 is a service-friendly storage enclosure with eight hot-swap removable drive bays. The four 80 mm fans installed in the front panel can be easily replaced by opening the front panel. The fans are centrally powered via a 4-pin connector. Two additional 80 mm fans are installed in the rear panel, which together ensure perfect airflow. The built-in backplane features two SFF 8643 connectors for connecting a controller. Type server chassis Color black EAN 4260455648356 Manufacturer No. 88887384 Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material steel Internal dimensions Plug-in card length maximum 265 mm The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. 4 x 3.5-inch hot-swap drive bays Slots Full-Size 7 pieces Front ports 2x USB-A 2.0 Front 4 x 80 mm slots for fans pre-installed Rear 2 x 80 mm slots for fans pre-installed Notes Power supply: ATX or Mini-Redundant PS/2 Rear connection of the mainboard No Further information Backplane: 8x SATA hard drives, 12Gb/s, Controller connector: 2x SFF 8643, Power connector: 2 x 4 Pin Accessories available Power supply bracket for ATX power supply (pre-assembled), power supply bracket for PS/2 power supply, screw assortment Volume 43 l Dimensions Width: 48.1 cm x Height: 17.5 cm x Depth/Length: 51.5 cm Weight 10.2 kg
Designed for next-generation motherboards, the View 380 XL TG ARGB mid-tower case features a special design that supports both standard motherboards and motherboards with hidden ports from ASUS, MSI and GIGABYTE. The dual-chamber design offers more installation space, improved cable management and increased air circulation for greater adaptability. The View 380 XL TG ARGB mid-tower case offers enhanced visibility with tempered glass on the front and left side, allowing the user to showcase their system. For good cooling, users can place a 360 mm radiator in the top and motherboard side. The case has three hydraulically mounted 120mm ARGB Lite reversible fans on the motherboard side and one hydraulically mounted 120mm ARGB Lite fan on the back. The fascinating lighting effects can be controlled via the motherboard software from ASUS, GIGABYTE, MSI and ASRock. The integrated GPU holder prevents the graphics card from sagging and provides additional support. The View 380 XL TG ARGB mid-tower case offers good expansion options. It can support a CPU cooler with a maximum height of 160mm, a GPU placement with a length of up to 420mm, and a power supply with a length of up to 180mm. The case is optimized for excellent cooling performance and comes with four hydraulically mounted 120mm ARGB Lite fans, with the ability to install up to ten 120mm fans. When it comes to storage compatibility, the View 380 XL TG ARGB Mid-Tower Chassis offers maximum support for a total of up to three 2.5-inch SSDs or one 3.5-inch HDD. The bottom I/O ports include two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port and one HD Audio port, providing convenient access when the PC case is placed on a desk. Warning: The mainboard attachment is designed for a rear connection Tower case type Color red EAN 4711658548818 Manufacturer no. CA-11E-00MRWN-00 Made in China Series View Midi tower design Motherboard form factor ATX Material steel, 4 mm tempered glass Window Kit Yes Internal dimensions plug-in card length maximum 420 mm Internal dimensions CPU cooler height maximum 160 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 180 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 8 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x 120mm ARGB Lite reverse fan available Notes Cable management, right side: 3 x 120 mm ARGB Lite reverse fans available, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Top: 120/140/240/280/360 mm, Right: 120/240/360 mm, Back: 120 mm Rear connection of the mainboard No Further information Color: Flaming Orange Accessories available accessory box Volume 64 l Dimensions Width: 28.8 cm x Height: 47.1 cm x Depth/Length: 46.9 cm Weight 6.9kg
Starlink Standard 4 on kodukasutuseks mõeldud satelliidiinterneti komplekt, mis sobib voogedastuseks, videokõnedeks, mängimiseks ja kaugtööks. See võimaldab luua kiire ühenduse ka kõrvalises asukohas, kui antennil on avatud vaade taevale. • Tüüpiline allalaadimiskiirus 25–220 Mbit/s • WiFi 6 Router Mini • Leviala kuni 204 m² • Kaks Gigabit Etherneti pesa • IP67 ilmastikukindel antenn
Hanging cabinet 19 inches 12U 600x450 perforated doors (flat pack) black The Lanberg WF01 series of server cabinets is a modern and durable rack solution, perfect for use in companies and home IT networks. Made of high-quality materials, they are solid and easy to install, meeting the expectations of even the most demanding ICT professionals. WF01 server cabinets are available in various sizes and configurations, which allows for optimal cable management and safe storage of network equipment. Lanberg WF01 rack cabinets are the perfect choice for any ICT installation. Combining functionality, durability and elegant design, the WF01 series is a sure choice for your server infrastructure needs. Easy assembly Thanks to the simple and easy assembly of our server racks, you save time and effort, allowing you to focus on more important tasks. Regardless of your experience level, you can get your data center or server network up and running quickly. Our rack cabinets are equipped with clear paper assembly instructions that will guide you step by step through the entire process. Moreover, ensuring the highest quality of use, we also provide detailed video instructions that are available online. This way, you can be sure that you have access to a visual guide that will make it easier for you to understand and complete each step. Solid workmanship Reliability and durability are the key features of Lanberg server cabinets. Our rack cabinets are designed to be robust and reliable depending on the application. Made of high-quality cold-rolled steel, our server cabinets offer not only great durability, but also the highest precision. Each Lanberg rack cabinet is characterized by a solid construction resulting from an advanced production process that combines innovative solutions and careful workmanship. We take care of every detail, ensuring perfect protection of the boxes and high-quality painting with a matte surface, which emphasizes the professionalism of our products. Flat Pack Our Lanberg server cabinets are packed in the "Flat Pack" format for self-assembly. Thanks to this, you can easily transport our rack cabinets in vehicles with limited cargo space, as well as have full control over the assembly process. Our years of experience on the market have allowed us to perfectly understand how to secure items in cartons to minimize the risk of damage during transport. We use high-quality protective materials and careful packaging to ensure that the server racks reach you in perfect condition and ready for installation. Efficient cooling The WF01 series of Lanberg server cabinets is also dedicated to those who are looking for solutions for use in demanding temperature conditions. Our cabinets enable you to achieve optimal efficiency without sacrificing functionality, aesthetics and safety. Thanks to the use of two ventilation holes in the ceiling panel, we ensure excellent air flow and effective cooling. We offer users even greater control over the temperature inside the cabinet, which is crucial in maintaining optimal operating conditions for devices.
ASUS ROG Strix XG259QNS 62.23cm 16:9 FHD HDMI DP Experience unparalleled gaming performance with the ASUS ROG Strix XG259QNS. This 24.5-inch IPS WLED monitor features a Full HD 16:9 display with a blazing 380Hz refresh rate and 1ms/0.3ms response time. It boasts a 400 cd/m² brightness and includes 2x HDMI, DP, and a USB Hub with 2x USB 3.2 Gen 1 Type-A ports. Its sleek black design is complemented by a 5.58 kg net weight and dimensions of 55.8 cm x 21.8 cm x 49.2 cm.NB! DP-380Hz HDMI-240Hz
