Der 4P90 Bulk ist ein kompakter und leistungsstarker CPU-Kühler mit 4 Heatpipes.TypProzessorkühlerFarbesilber/schwarzEAN4260455649117Hersteller-Nr.88885656ArtCPU-Kühler mit LüfterGeeignete Sockel1150, 1151, 1155, 1156, 1200, 1700, 1851, 775, AM3, AM4, AM5BefestigungKlammer einfachLautstärke22,7 dBCPU bis max. TDP125 WattDrehzahl800 bis 2.000 U/minMaterial KühlkörperAluminium, KupferHeatpipeverbindungen4 Stk.LüfterlagerungHydroVolumenstrom59,5 cfmLuftdruckBis 1,22 mm/H2OStromanschluss4-Pin-PWMZubehör vorhandenMontagezubehör, WärmeleitpasteAbmessungen Fan1Anzahl: 1 Stück, Breite: 92 mm, Höhe: 92 mm, Tiefe: 25 mm
DarkFlash CB360 CPU Water Cooler (Black)The DarkFlash CB360 is a high-performance all-in-one water cooler that combines excellent heat dissipation with striking ARGB lighting and a modern, panoramic water block design. It features an aluminum heatsink, three pre-installed 120mm fans, and a copper base with a large contact surface, allowing it to effectively cool even the most demanding processors with a TDP of up to 300 W. In addition, the integrated ARGB lighting with synchronization support ensures the kit blends perfectly with modern gaming PCs and workstations.Panoramic water block with ARGB lightingThe cooling system features a transparent, panoramic water block with built-in ARGB lighting that creates unique lighting effects. This gives the computer a modern look and looks great in cases with glass side panels. Support for ARGB synchronization (including ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion 2.0, and ASRock Polychrome RGB) allows you to easily match the lighting to the rest of your PC components and create a cohesive visual setup.Effective CPU coolingThe CB360 model is equipped with an aluminum heatsink and a large copper base, which increases the contact surface with the CPU and improves heat conduction. The system is supported by a three-phase pump that operates at approximately 2850 RPM and runs exceptionally quietly—its noise level is only about 29 dBA. All of this creates the ideal conditions for gaming, rendering, or working with demanding applications.Quiet operation and efficient PWM fansThree integrated 120 mm fans use fluid dynamic bearings and support automatic PWM control, allowing the rotational speed to be dynamically adjusted to the CPU temperature. The range from 800 to 1,800 RPM maintains a balance between performance and quiet operation. Airflow reaches 69.81 CFM, pressure is 2.2 mmH₂O, and the maximum noise level is only 28.5 dBA. This allows you to comfortably use your computer even during long gaming sessions—without your hardware overheating and without annoying noise.Durable construction and easy installationThe model uses 12.5 mm braided tubing, which reduces fluid evaporation and increases the durability of the entire system. Pre-installed fans simplify installation and allow you to get your computer up and running faster. The cooler supports 5V 3-pin and PWM 4-pin connectors, allowing for easy connection to compatible motherboards.Wide compatibility with Intel and AMD platformsThe DarkFlash CB360 works with popular Intel and AMD processors, making it suitable for both new and upgraded computers. The cooling system supports Intel LGA 1200, 1700, and 18xx sockets, as well as AMD AM5, AM4, and AM3 sockets. You’ll have no trouble adapting it to your setup!IncludedHeatsink and water block x1120 mm fan x3User manual x1Mounting screw set x1Accessory set x1Thermal paste x1 ManufacturerDarkFlashModelCB360ColorBlackCooling typeIntegrated AIO water coolingTDP300 WWater block dimensions66 × 66 × 67.7 mmWater block materialBlock – copper, housing – plasticPump speed2850 ±10% RPMPump voltageDC 12VPump noise level29 ±10 dBAHeat sink materialHigh-density aluminumWater reservoir dimensions396 × 120 × 27 mmCable typeBraided cableCable length450 mmFan size120 × 120 × 25 mmBearing typeHydraulicFan controlPWMFan speed800-1800 ±10% RPMMaximum fan noise level28.5 dBAMaximum airflow69.81 CFMMaximum air pressure2.2 mmH2OFan lifespan (MTTF)Up to 30,000 hoursIntel compatibilityLGA 1200 / 1700 / 18xxAMD compatibilityAM5 / AM4 / AM3
360mm radiator, 30mm height, copper core, 2x G1/4 connections, The Stealkey Customs SC RADPRO L360 H30 is a 360mm radiator designed for high-performance custom water cooling systems. With a 30mm thickness and a high-quality copper core, it provides efficient heat dissipation for gaming and high-end systems. 360mm format – Large cooling surface for powerful CPU and GPU loops. 30mm thickness – Ideal for balanced performance with good case compatibility. Copper core – High thermal conductivity for efficient temperature control. G1/4 thread – Compatible with common fittings and custom loop components. Optimized for 120mm fans – Flexible integration into standard 360mm mounts. Efficient heat dissipation in 360mm format With its generous surface area, the RADPRO L360 H30 is ideal for high-performance systems. It supports stable temperatures even under heavy continuous load, making it a solid foundation for demanding custom loops. 30mm thickness for flexible integration The moderate radiator thickness offers a good balance between cooling performance and installation compatibility. It can be easily integrated even in cases with limited space, keeping your build flexible and easy to plan. High-quality materials for reliable performance The copper core ensures efficient heat transfer from the coolant to the fins. Combined with suitable 120mm fans, this creates a powerful cooling system, resulting in consistent and reliable temperature control.
Kaardus karastatud klaaspaneelid • Eelpaigaldatud PWM jahutusventilaatorid • Õhuvoolule optimeeritud korpuse konstruktsioon • Toetab suuri graafikakaarte ja jahuteid • Ruumikas sisemus ja kaablite haldus
The Zyxel XMG1915 Series is a comprehensive family of 2.5 Gbps intelligent managed switches, available in three models with and without Power over Ethernet (PoE) capabilities. Each Ethernet port on these models supports 2.5Gbps speeds, and they also feature two 10Gbps SFP+ ports to meet the growing high-speed networking needs of businesses.
"MikroTik RB962UiGS-5HacT2HnT, tuntud ka kui MikroTik hAP ac, on mitmekülgne ja suure jõudlusega traadita ruuter nii koduseks kui ka professionaalseks kasutamiseks. See kahesageduslik seade töötab AC-tehnoloogiaga, toetades samaaegset tööd 2,4 GHz ja 5 GHz sagedusalades, pakkudes kiiret ja usaldusväärset internetiühendust kogu teie ruumis. Sellel on viis Gigabit Ethernet-porti kiireks traadiga ühenduseks, mis muudab selle ideaalseks voogedastuseks, mängimiseks või muudeks ribalaiust nõudvateks rakendusteks. Marsruuteril on ka USB 2.0 port välise mäluseadme või 3G/4G-modemi jaoks ning üks SFP-port kiudoptilise ühenduse jaoks, mis annab võrku laiendamiseks võrratu paindlikkuse. Lisaks on viimasel Ethernet-portil PoE-väljund, nii et saate toita teist seadet ilma lisajuhtmeteta. "hAP ac on varustatud võimsa 720 MHz protsessori ja 128 MB RAMiga, nii et see saab hakkama suure koormusega ja säilitab optimaalse jõudluse. RouterOSiga eelinstallitud ruuter sisaldab täiustatud funktsioone, nagu tulemüüri kaitse, VPN-funktsioonid, kasutaja autentimine ja ribalaiuse haldamise vahendid. Selle kompaktne disain sobib igasse keskkonda, olgu see siis seinale, lakke või lauale paigaldatud. MikroTik hAP ac-ga saate usaldusväärse, funktsionaalselt rikkaliku ja kohandatava võrgulahenduse, mis vastab erinevatele vajadustele, lubades sujuvat ühenduvust ja täiustatud võrgulahendusi muljetavaldava hinnaga.
Stable 10 Gb/s data transfer without electromagnetic interference The installation F/FTP category Cat. 6a network cable eliminates the problem of slow transfer and interruptions in data transmission in local LAN networks. The shielded construction blocks external electromagnetic interference, guaranteeing a clean signal in offices and server rooms. The product supports a frequency band of up to 500 MHz, which sets it apart from standard solutions and ensures stability for demanding network applications. Key advantages Bandwidth up to 10 Gb/s – guarantees lightning-fast transfer of large files and smooth operation of systems. Double F/FTP shielding – completely cuts off external interference and eliminates crosstalk between pairs. 24 AWG pure copper conductors – ensure minimal signal attenuation and years of cable service life. Full compatibility with PoE, PoE+ and PoE++ – enables simultaneous powering of devices and data transmission over a single cable. 0.50 mm thick PE polyethylene sheath – protects the internal structure from mechanical damage. HDPE insulation – protects the copper conductors and guarantees appropriate dielectric parameters. Maximum performance thanks to conductive copper conductors The cable uses thick conductors with a diameter of 24 AWG made entirely from pure copper. The use of cheap CCA composite substitutes eliminates voltage drops and reduces cable heating under load. Pure copper maintains full signal integrity along the entire cable run, protecting the infrastructure from failures and costly downtime. Powering network devices through a single cable The pure copper construction offers full compatibility with PoE, PoE+ and PoE++ power standards. This solution delivers power directly to CCTV surveillance cameras, Wi-Fi access points or VoIP phones without the need for separate power lines. Using Extralink twisted pair cable reduces the cost of additional cabling and greatly simplifies equipment installation in hard-to-reach places. Lightning-fast data transmission in corporate networks The cable easily supports transmission speeds of 10 Gb/s, meeting the strict requirements of modern corporate networks. The bandwidth of the 10 Gigabit Ethernet standard shortens database copying times, eliminates delays during video conferences and enables smooth high-definition video streaming. It is the optimal choice for building a network backbone that will cope with growing internet traffic. Safe structured installation inside buildings The twisted-pair computer cable was designed for safe installation inside residential, office and commercial buildings. The outer sheath protects the installation when pulling it through cable trays and conduits. The product makes it easier to create stable subscriber points and fault-free connections between rack cabinets, guaranteeing the aesthetics and durability of the entire network installation. Advanced protection against internal interference The construction is based on 4 optimally twisted pairs, each with individual foil shielding. This solution completely blocks crosstalk between adjacent conductors inside the cable. An additional layer of HDPE insulation with increased density protects the cable mechanically and maintains a constant pair geometry, which translates into stable transmission parameters for many years.
ADATA CACCU3-100W-100AN-BK. Kaabli pikkus: 1 m. Pistmik 1: USB C, Pistmik 2: USB C, USB versioon: USB 3.2 Gen 2 (3.1 Gen 2), Maksimaalne andmeedastuskiirus: 10 Gbit/s, Toote värv: Must
VITURE Mobile Docking Station Holder for Nintendo Switch 2The VITURE mount is a practical accessory that allows you to directly attach the VITURE Mobile Docking Station or VITURE Pro to your Nintendo Switch 2 console, giving you the convenience of storing and transporting your equipment - all in one compact form factor, always ready to play.Secure fitThe holder's design is equipped with soft spacers that ensure free airflow and protect the console from scratches. This guarantees safe use without risk of damage even during frequent mounting and dismounting.Quick assembly and disassemblyThe special slide-in system makes connecting and disconnecting the docking station in seconds. Just slide in the holder, click and you can start playing games immediately.Durability for yearsThe handle is made of durable PA66 (Polyamide 6.6, a thermoplastic polymer known for its high mechanical strength) reinforced with flexible TPE (thermoplastic elastomer), which ensures both resistance to mechanical damage and comfort of use. It's a sturdy accessory that will accompany you for hours of intense play.Includedmobile docking station holderuser manual ManufacturerVITUREDimensions17.1 x 12.1 x 41.6 mmWeight69.9 gColorBlackMaterialTPE, PA66CompatibilityNintendo Switch 2
The 120 cm USB-C to VITURE magnetic connector cable is a practical solution for those who want to conveniently connect their VITURE XR glasses to compatible devices with a USB-C port. The longer cable gives you more freedom of movement and makes it easier to use your equipment on a daily basis – at home, at work, or on the go.Stable magnetic connection and universal USB-C connectorThe cable is equipped with a magnetic connector compatible with VITURE XR glasses. This solution facilitates quick connection and disconnection of the equipment, while reducing the risk of accidental cable disconnection. In practice, this means greater device safety and convenience during everyday use. The USB-C standard allows you to connect the glasses to a wide range of compatible devices, from smartphones to laptops. This means that a single cable is enough to use various image and entertainment sources without the need for additional adapters.Included:120 cm USB-C cable for magnetic connectorQuick start guideSafety instructions ManufacturerVITUREModelOne-CtoM-110-BlkLength1.2 mWeight29.8 gColorBlackConnectorsUSB-C, magnetic connectorUSB standardUSB 3.2 Gen 1Data transfer speedup to 10 Gb/sPower20 WCompatibilitysmartphones, MacBooks, iPads, laptops, VITURE XR glasses
4-IN-1 GAMING BUNDLE GXT 792 QUADROX 4-in-1 gaming bundle with lightweight headset, spill resistant RGB keyboard, illuminated mouse, and mousepad - Game with style, comfort and precision with this ultimate accessory bundle - Comfortable lightweight headset with soft over-ear pads so you can play for hours on end - Powerful 50mm drivers for an immersive gaming experience - Flip-up microphone offers crisp and clear communication whilst you game - Keyboard and mouse with adjustable illumination to make your gaming setup even cooler - Multicolour LED-illuminated gaming keyboard with spill-resistant design - Anti-ghosting functionality registers up to 25 simultaneous key presses - Mouse with 6 programmable buttons and DPI speed button (200-6400 DPI) - Mousepad with optimised surface texture for optimal accuracy and smooth control
ARCTIC MX-6. Tüüp: Thermal grease, Toote värv: Hall, Maksimaalne kasutamistemperatuur: 150 °C. Kaal: 4 g. Kogus pakis: 1 tk, Pakendi laius: 24 mm, Pakendi sügavus: 120 mm
Compact dual-chamber midi-tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case cover for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 on the front panel
The Akyga AK36BK housing is a product in the Micro ATX standard, which advantage is minimalism that allows you to complete a computer that occupies a small space both in the office or at home. Light and small in sized, the product has an aesthetic look. It supports motherboards in the following formats: Micro ATX, Flex ATX and Mini ATX. The housing allows mounting a graphics card up to 250 mm long and up to 3 additional fans supporting cooling. The product architecture is adapted to the installation of disks and drives in 3 internal bays. Two 3.5 "and one 2.5" or two 2.5 "and one 3.5". The front panel of the housing has two USB A ports, one in 2.0 standard and one in a much faster 3.0 version. Above them there are sockets for connecting a microphone and audio equipment.
The 3U rackmount server case SST-RM31 is designed for demanding computing environments, combining high compatibility, flexible power supply options, and exceptionally strong cooling performance. It supports motherboards up to the SSI-EEB form factor, making it suitable for both standard ATX and E-ATX platforms as well as professional server boards. For power supply, the case offers a choice between two SFX-L power supplies or redundant 2U-CRPS units, making it ideal for mission-critical systems where high availability is crucial. Inside, there is ample space for up to eight full-height PCI expansion cards, allowing for extensive GPU, network, or storage configurations without compromise. For efficient cooling, the case supports 360 mm water cooling radiators, which can be operated with up to six 120 mm fans in a push-pull configuration. Alternatively, CPU air coolers up to 110 mm in height can be installed, allowing for classic cooling solutions without limitations. The case is rounded out by modern connectivity, including an integrated USB Type-C port on the front, providing quick access to current devices and storage media. Overall, this server case offers an ideal foundation for high-performance workstations, virtualization servers, storage-intensive applications, or compact compute clusters that require both expandability and maximum cooling performance.
The TR300 WS Mid-Tower Case is an ATX chassis with a front-mounted power supply for optimal space utilization, and supports AIO liquid coolers up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, offering flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points within the case, depending on the motherboard size. Maximize the visual effects of your TR300 WS Mid-Tower Case with an upgrade to our LCD screen kit. The 6-inch LCD display allows real-time monitoring and the upload of custom images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
