5-Port 10/100 Mbps PoE SwitchTPE-S50 (Version v1.0R)4 x 10/100 Mbps PoE ports and 1 x 10/100 Mbps port31 W total power budget1 Gbps switching capacitySturdy metal switchPlug and Play installationUse with a TRENDnet PoE Splitter to network and power non-PoE devices
Information technology professionals rely on IBM quality to ensure maximum productivity. As the power of applications, processors, memory adapters and storage devices increases, high-end computer users are seeking ways to optimize their system performance. IBM provides leading solutions, adding new levels of performance, availability, flexibility, and management.Andmeedastuskiirus (maksimaalne)10000 Mbit/sLiidese tüüpSFP+VõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3ae,IEEE 802.3uSFP-transiiveri tüüpSRMaksimaalne ülekandekaugus300 m
Rocket® Prism access points incorporate high-performance airMAX ac and airPrism technologies for maximum performance of wireless networks in high-density areas. 2.4GHz Rocket, no doesn’t operate from 2.3 to 2.7GHzIncorporates GPS for PtP synchronization with another R2ACFor PtP with another R2AC, it is much quicker than the older RM2.Supports retro-compatibility with the following: LOCOM2, NSM2, AG-2G, NBE-2G, PBE-M2, RM2, on “Mixed PtMP”Advantages: Much faster processor, Less latency and higher amount of real MbpsReplaces: RM2(in certain applications) 2.4 GHz Coverage The Rocket® Prism 2 AC covers the full 2.4 GHz radio.Revolutionary Filtering TechnologyUbiquiti’s patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments.Designed for High PerformanceThe Rocket Prism 2 AC features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView® real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.2.4GHz Rocket, no doesn’t operate from 2.3 to 2.7GHzIncorporates GPS for PtP synchronization with another R2ACFor PtP with another R2AC, it is much quicker than the older RM2.Supports retro-compatibility with the following: LOCOM2, NSM2, AG-2G, NBE-2G, PBE-M2, RM2, on “Mixed PtMP”Advantages: Much faster processor, Less latency and higher amount of real MbpsReplaces: RM2(in certain applications)
LogiLink's outdoor patch cords are specifically designed for use in unprotected, harsh environments, but not for underground applications. The cable sheath made of resistant polyurethane (PE) protects against weathering and UV radiation. The cables are still flexible and easy to lay.
4 x Gigabit PoE+ ports 1 x Gigabit port 120W PoE power budget 10Gbps switching capacity Supports jumbo frames up to 9KB Hardened IP30 rated metal housing Includes DIN-Rail bracket and magnetic wall mount kit Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm relay triggered by power failure Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)
QuMax for Teltonika RUT240/230 Integrated outdoor multi band high power LTE directional antenna + outdoor Wi-Fi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUT240 or RUT230 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It also has embedded outdoor Wi-Fi omni antennas. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support
Environmentally Hardened Design PLANET Industrial 8-port Gigabit 802.3at PoE+ Switch, IGS-5225-8P2T2S, is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-5225-8P2T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-5225-8P2T2S can be placed in almost any difficult environment. The IGS-5225-8P2T2S also allows either DIN rail or wall mounting for efficient use of cabinet space. Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-8P2T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms. High Power PoE for Security and Public Service Applications To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-5225-8P2T2S provides 8 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36-watt power output and data per port over one Cat5E/6 Ethernet cable. As the whole system comes with a total 240-watt PoE budget, the IGS-5225-8P2T2S is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n) wireless LAN access points, PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras and other PoE network devices, doubling that of the current conventional 802.3af PoE. Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-5225-8P2T2S’ GUI, you just need one click to search and show all of the ONVIF devices via network application. In addition, you can upload floor images to the switch and can remotely monitor or inspect an assembly line. Moreover, you can get real-time surveillance information and online/offline status; the PoE reboot can be controlled from the GUI. Intelligent Alive Check for Powered Device The IGS-5225-8P2T2S PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-5225-8P2T2S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-5225-8P2T2S can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled Power Recycling The IGS-5225-8P2T2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. SMTP/SNMP Trap Event Alert The IGS-5225-8P2T2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. Effective Alarm Alert for Better Protection The IGS-5225-8P2T2S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Digital Input and Digital Output for External Alarm The IGS-5225-8P2T2S supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-5225-8P2T2S port shows link down, link up or power failure. Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225-8P2T2S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225-8P2T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-8P2T2S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-8P2T2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 6 trunk groups with 4 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225-8P2T2S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-5225-8P2T2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225-8P2T2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. Powerful Security The IGS-5225-8P2T2S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225-8P2T2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-5225-8P2T2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-8P2T2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. 1588 Time Protocol for Industrial Computing Networks The IGS-5225-8P2T2S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Industrial Area Department/Workgroup PoE Switch Providing up to 8 PoE+, in-line power interfaces, the IGS-5225-8P2T2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-8P2T2S makes the installation of IP cameras or wireless AP easier and more efficient.
Seda Delocki vöötkoodiskannerit saab ühendada juhtmevabalt arvutiga, sülearvutiga või otse mobiiltelefoni või tahvelarvutiga. Kõiki levinud 1D- ja 2D-viivakooditüüpe saab täpselt registreerida ka pikkade vahemaade tagant. Lisaks tunneb skanner ära ekraanidel ja monitoridel kuvatavad vöötkoodid. Automaatne kohanemine ümbritseva heledusega Skanner kohandub automaatselt vastavalt ümbritseva keskkonna heledusele ja jäädvustab optimaalsetes valgustingimustes kuni 120 skaneeringut sekundis. Vähese ümbritseva heleduse korral valgustab vöötkoodi täiendav valge LED ja seega saab seda kasutada ka kehvades valgustingimustes. Tugev töötlemine Tänu oma vastupidavale konstruktsioonile suudab skanner hõlpsasti taluda kuni 1,80 m kõrguse kukkumise ja sobib seega ideaalselt kasutamiseks tööstuskeskkonnas. Laadimisjaam toimib liidesena Skaneeritud vöötkoodide andmeedastus toimub kas Bluetoothi või 2,4 GHz sagedusala kaudu. Lisaks käsiskänneri laadimisele toimib skänneri induktiivne laadimisjaam ka nii Bluetoothi kui ka 2,4 GHz liidese funktsioonina ning on süsteemiga ühendatud USB-kaabli kaudu. Spetsifikatsioon Laadimisjaam - Ühendus: 1 x USB 2.0 Type-A pistikupesa - Sisendpinge: 5 V töö: max. 1100 mA ooterežiim: max. 700 mA - Töötemperatuur: -20 °C ~ 50 °C - Säilitustemperatuur: -40 °C ~ 70 °C - Suhteline õhuniiskus: 5 - 95 % (ei kondenseeru) - Värv: must - Kaal: umbes 295 g - Mõõtmed (LxSxK): ca. 180 x 100 x 75 mm - Kaabli pikkus ilma pistikuteta: ca. 1,25 m - Bluetooth standard V 4.1 - 2,4 GHz Vöötkoodi skanner - Dekodeeriv kiip: ARM Cortex 32 Bit - Laetav aku: Li-Polümeer aku 1800 mAh - Resolutsioon: max. 1280 x 800 - Käiviti: skaneerimisnupp - Lugemiskaugus: ca. 30 mm kuni 500 mm - Lugemise täpsus: 3 - 4 millimeetrit - Mõõtmisvahemik: kuni 10 m 2,4 GHz: kuni 100 m - Sisemine mälu: 16 MB - Valguse värvus: nähtav punane LED - Kompensatsioonivalgus: LED valge - Andur: CMOS-pildiandur - Skaneerimiskiirus: kuni 120 skaneerimist sekundis - Skaneerimisnurk: 55° - Ümbritsev heledus: max. 100000 luksi - Sisendpinge: 5 V - Voolutarve: V 5 töö: max. 220 mA ooterežiim: max. 20 mA - Töötemperatuur: -20 °C ~ 50 °C - Säilitustemperatuur: -40 °C ~ 70 °C - Suhteline õhuniiskus: 5 - 95 % (ei kondenseeru) - Värv: must / oranž - Kaal: umbes 321 g - Mõõtmed (LxSxK): ca. 185 x 100 x 80 mm - Skaneerimiskoodid: Koodid: Code 128 Kood 39 Vahelagunenud 2 5-st EAN-8 / EAN-13 ISBN - 13 Andmemaatriks Micro PDF417 Micro QR PDF417 QR-kood Süsteeminõuded - Android 9.0 või uuem versioon - Bluetooth standard 4.1 või kõrgem - iPad Pro (3. põlvkond) või uuem - Mac OS 10.15.5 või uuem - Windows 8.1/8.1-64/10/10-64/11 - PC või sülearvuti, millel on vaba USB A-tüüpi port dongle'i jaoks Pakendi sisu - Vöötkoodi skanner - USB-laadimiskaabel - Laadimisalus - Kasutusjuhend
See Delocki USB-kaabel võimaldab USB Type-C™-ühenduse pikendamist. Spetsifikatsioon - Liitmikud: 1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ isane > 1 x SuperSpeed USB (USB 3.1 Gen 1) USB Type-C™ emane - Kaabli gabariit: 32 AWG andmeliini pikkus: 32 AWG 24 AWG toiteliin - Väljundvool: kuni 3 A - Kaabli läbimõõt: ca 4,5 mm - Andmeedastuskiirus kuni SuperSpeed USB 5 Gbps - Värv: must - Pikkus koos pistikutega (L): ca 0,5 m Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu - USB-kaabel
Kulutõhus täislahendus, mis sobib ideaalselt karastatud keskkondaIGS-4215-16T2S / IGS-4215-16T2S-U on mõeldud paigaldamiseks rasketes tööstuslikes nõudlikes keskkondades ja on uus liige PLANET Industrial-grade, DIN-redeli tüüpi L2/L4 Managed Gigabit Switch perekonnas, et parandada kriitiliste ärirakenduste kättesaadavust. See pakub IPv6/IPv4 dual stack haldust ja sisseehitatud L2/L4 Gigabit kommutatsioonimootorit koos 16 10/100/1000BASE-T porti ja 2 täiendavat 100/1000BASE-X SFP kiudoptilist pesa andmete ja video üleslülitamiseks. IGS-4215-16T2S / IGS-4215-16T2S-U on võimeline töötama usaldusväärselt, stabiilselt ja vaikselt igas karastatud keskkonnas, ilma et see mõjutaks selle jõudlust. See on vastupidavas IP30 metallkorpuses, mille töötemperatuur on vahemikus -40 kuni 75 kraadi C.
