Hightech compact fans with bionic loop rotor (BionicLoopFan®). The special wing shape triggers turbulence in the air. This physical effect reduces the volume which is based on turbulances in the air flow and reduces energy consumption. With a straightened air flow and a higher Airflow these fans usually offers a higher overall cooling capacity over classical fans . Welcome to the future! - 100% developed in Germany - TÜV-certified sound level specifications = real data - extremely low-noise bionic loop rotor - bionic deep sound fan frame - position-invariant magnetic bearing NB-NanoSLI® 2 NEW! - silent NB-EKA P2 Drive NEW! - Bayer® Makrolon® rotor with anti-dust technology - weighted reinforced fibreglass PBT frame - NB cable management with two pluggable connection cables - Perfect results for PC casing, CPU cooling systems and radiator( higher cooling power at same revolution ratel) Technical Details: Dimensions: 140 x 140 x 25mm Number of Revolutions: 600 rpm Connection: 3 Pin Start / nominal voltage: 5V / 12V Volume: 5.7 dB(A) Performance: 73.6 m³ Scope of Delivery: 4 fine thread screws and knurled nuts for tool free assembly 4 NB silicone slics for vibration-free assembly each 2x 20 and 50 cm connection cable with textile sheath
Dimensions 120x120x25mm, revolutions 1100rpm, Airflow 65m³ / h, Air pressure 0.82mmH₂O, Volume 15.9dB (A), Connection 4-pin PWM, Voltage range 6-12V, power consumption 1.44W, Special features vibration damper, BL089
Hochwertiges Reservoir aus Acryl, 200 ml Füllvolumen & flexible Montage, Vorbereitung für DDC-Pumpe & 4 Anschlüsse für 1/4-Zoll-Fittings, Bracket zur Installation auf 120- und 140-mm-Lüftern, digital adressierbare RGB-Beleuchtung
LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life. INNOVATIVE DESIGN ENABLES QUIET AND EFFICIENT VENTILATION The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure. Technical Data Performance Fan Speed: 1350 rpm Airflow: 74 CFM/ 126 m³/h Static Pressure: 1.6 mm H₂O Noise Level: 0.5 Sone Operating Ambient Temperature: 0 - 40 °C Fan Fan Frame: Standard Control Type: Fixed Speed Connector: 3-Pin-Connector Fan Bearing: Fluid Dynamic Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 6 V Current/ Voltage: 0.20 A / 12 V Cable Lenght: 400 mm Size & Weight Lenght: 140 mm Width: 140 mm Height: 27 mm Weight: 180 g
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. It has a total of seven G1/4" ports and the tube itself is made of acrylic. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Schicker zylindrischer Ausgleichsbehälter, Röhre und Aufsätze aus transparentem Acryl, drei Aufsätze für flexible Anschlussmöglichkeiten, silberne Sicherungsringe aus Aluminium
Every water cooling system requires either soft or hard tubing to connect the individual components such as radiators, waterblocks and reservoirs. PVC is usually used for soft tubing it has many fantastic properties that make it easy to work with and it is cheap. However, Alphacool is now bringing a new material from the Alphacool Enterprise Solutions series across to the everyday user. This tubing is called Alphacool AlphaTube TPV and is the choice of tubing for industries. What is the advantage of TPV? Compared to PVC hoses, the AlphaTube TPV hoses offer various advantages for water cooling. It is much more resistant to acids and alkalis. It is also much more temperature resistant than PVC tubing. The Alphacool AlphaTube TPV can withstand temperatures up to 155°C. While PVC hoses begin to warp at higher water temperatures. This means areas with tighter bends will warp but the TPV hose remains stable in its shape. This eliminates the risk of kinks in tubing and the restriction of flow. How is AlphaTube TPV installed? The Alphacool AlphaTube TPV hose is as easy and simple to install as any other PVC hose. It is slightly stiffer, but only very slightly. Handling the TPV hose is just as simple as any other soft tubing. What is special about a tpv hose? The Alphacool AlphaTube TPV is characterised by its high resistance to acids, bases and external influences. In addition, the hose has an extraordinary longevity that far surpasses that of PVC hoses. The matt black hose also offers a discreet velvet look. An eye-catcher in every water-cooled PC. Technical data: Material: Thermoplastic vulcanizates, EPDM/PP Length: 3,3 m Colour: Matt black Operating temperature: -50 to + 155°C Hardness: 35 Shore-A to 50 Shore-D Size: 16/10 mm Download data sheet PDF: Alphacool tube AlphaTube TPV 16/10 - Black Matte 3,3m (10ft) Retailbox 330cm
This dual use laptop cooling pad, designed for usage on both your lap and your desk will ensure that you can continue to work comfortably no matter where you are, no matter how long you’ve been working. Built-in USB pass-through connection provides expanded connectivity. Your work station will be both a pleasant and convenient working environment. • Designed for dual usage : on lap or on desk • Fit up to 17.3’’ laptops • 2 silent fans • USB power source • Front anti-skid arm • Nonslip feet • USB hub • Fan speed : up to 1100 rpm • Fan diameter: 110 mm Option for Models Fit up to 17.3’’ laptops USB, Colour Black
The era of digital air coolers has arrived, and DeepCool is proud to introduce the AK500 DIGITAL. Everything you loved about the AK500 ZERO DARK, but with a sleek magnetic status display and ARGB LED strips. This black processor air cooler is compatible with a wide range of Intel and AMD sockets, including 1151 (H4), 1150 (H3), AM5, 1700, and 1200, ensuring a broad compatibility with most modern CPUs. It measures 220mm in depth, 195mm in height, 160mm in width, and has a net weight of 1340g, with a 24-month warranty, making it a robust and reliable choice for keeping your processor cool and functioning at its best.
The CORSAIR iCUE Link LX120 RGB case fan is a high-performance cooling solution designed for desktop computers and servers. It features a 120 mm fan diameter and a magnetic bearing for quiet and efficient operation. With an airflow range of 9.75-69.9 cfm and air pressure of 0.13-5.22 mm, it provides exceptional cooling capabilities. The fan supports Pulse-width modulation (PWM) for precise speed control and includes a Zero RPM fan mode for silent operation at low temperatures. Additionally, the LX120 RGB is equipped with addressable RGB lighting and CORSAIR AirGuide technology, enhancing both the aesthetics and airflow direction of your system. The noise level is kept between 10 - 36 dBA, ensuring a quiet environment. With the included mounting kit and Corsair iCUE support, installation and customization are straightforward, making it an ideal choice for system modding and upgrading your cooling system.
Arctic P12 Max (5-Pack) Black High-Speed PWM Fan Extremely wide speed range Building on the success of the P14 PWM, the P14 Max extends the controllable speed to an astonishingly wide range from 400 rpm up to 2800 rpm. This enables both quiet operation when only a small amount of airflow is required and an unprecedented level of performance on heatsinks and radiators. The P14 Max achieves a significant performance increase on existing air and water cooling solutions. Maximum Performance — Without Compromise The P14 Max delivers a focused airflow and high static pressure, making it suitable for all scenarios. It is optimized for use on radiators, heat sinks, perforated panels and mesh. The P14 Max is therefore the optimal fan for enthusiasts and professionals who require maximum performance with high durability. 0 dB Mode — Zero rpm The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. The P14 Max thus enables incomparably dynamic adjustment of the speed so that the airflow can be perfectly regulated for every case . Improved stability The P14 Max uses a closed fan wheel design. The advantage of this fan wheel combination is the uncompromising pressure stability. In scenarios with high pressure resistance and higher speeds, the force is distributed evenly across the entire fan wheel and enables low-vibration rotation with high static pressure at the same time. Maximum smoothness, minimal vibration The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. Thanks to sinusoidal magnetization, the motor of the P-fans only generates 5% of the commutation vibrations of a conventional DC motor. The rubber contact surfaces attached to the corners additionally dampen the residual vibrations caused by the higher revolutions. . Almost silent thanks to high-quality plain bearings As a special feature, the P14 Max is equipped with ARCTIC's proven hydrodynamic plain bearing. This enables almost silent operation at low speeds - as requested by many customers. At maximum speed, however, brutal performance is guaranteed. Although these bearings tend to wear out, ARCTIC does not compromise on durability and continues to offer the 6-year warranty. Quality you can rely on In order to ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the certainty that our products are not only outstanding in their quality, but also in their durability. A security that we are happy to pass on to our customers. That is why we offer a 6-year manufacturer's guarantee.
3x 120-mm PWM fans optimized for use in cases Daisy-chain for less cable clutter Good cooling at up to 1,800 rpm and quiet operation at a maximum of 23.8 dB(A) Stylish lighting thanks to addressable RGB LEDs Regular orientation for standard airflow High airflow of 99.46 m³/h Jonsbo ZL-120B Reverse ARGB fan in detail The Jonsbo ZL-120B Reverse is a powerful 120-mm fan with a reverse design, specially developed for use as a case fan. Thanks to the reverse design, the fan can move air in the opposite direction, which ensures more efficient cooling in certain case configurations. It features daisy-chain, a plug-in system that reduces the number of cables in your gaming PC and contributes to a cleaner look. With its addressable RGB lighting, it doesn’t just look stylish but also delivers plenty of power. Thanks to the built-in hydraulic bearing, you benefit from a significantly extended lifespan for your device, allowing for reliable and low-maintenance operation in the long term. Efficient cooling at low noise levels The Jonsbo ZL-120B Reverse adjusts its speed via a PWM signal according to the system’s requirements. This enables precise adjustment of the fan speed from 800 to 1,800 rpm. Even at full load, it operates at a volume of just 28.8 dB(A). Each corner is also fitted with rubber pads to decouple vibrations and minimize noise. With an airflow of up to 99.46 m³/h and a static pressure of 2.0 mmH₂O, the CPU is effectively cooled.
The EK-Quantum Vector Strix RTX 3070 D-RGB from EK is a complete cooler for the graphics card of the ROG Strix RTX 3070 from ASUS. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure provides very efficient and reliable cooling. Visually, the cooler is rounded off with a black acetal lid and has four G1/4" connections. But there's more: an addressable D-RGB strip is also integrated, which provides a little illumination even on dark gaming days. The graphics card cooler is compatible with the common RGB synchronisation technologies of all major mainboard manufacturers. Technical Data Material: Nickel-Plated Copper (bottom), Acetal (cover) Color: Black Thread: 4x G1/4" D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) D-RGB LED count: 6 D-RGB cable length: 500mm Compatibility Asus ROG Strix RTX 3070 Scope of Delivery EK-Quantum Vector Strix RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
Premium-AiO-Kühlung in Schwarz, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 240-mm-Radiator, zwei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design und leiser Betrieb, inkl. Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel mit vielen AMD- und Intel-Sockeln
The EK-Quantum Scalar Flow Indicator is a high-quality GPU-mounted flow indicator with addressable D-RGB illumination. It visually represents the coolant flow rate, which is often difficult to see with the naked eye. This can be very useful to immediately see if your loop is in perfect condition or if there are problems with the pump or flow. It has dedicated G1/4" inputs and outputs. It is essential to ensure that the labelled connections are connected correctly. This product is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The anodised aluminium cover hides the LED hotspots and provides uniform illumination. Enclosed: EK-Quantum Scalar Flow Indicator Bottom-Top D-RGB - Black G1/4" nickel-plated brass plug x 1
The ARCTIC M2 Pro is designed to enhance the performance of your M.2 solid state drives. This passive cooler, made from durable aluminum, dissipates heat, helping to maintain optimal operating temperatures and prolong the life of your SSD. Included in the package are two thermal pads, ensuring easy installation and efficient thermal transfer, making it an ideal choice for reliable performance in high-demand environments.
