Product Details: Thermal Grizzly - Basic TG Putty Basic is a non-electrically conductive alternative to traditional thermal pads. This easy-to-apply and flexible material serves as a "gap filler," effectively compensating for height differences. It is an ideal replacement for thermal pads on graphics cards, where different pad thicknesses are typically used. When replacing pads or upgrading to a GPU water block, multiple thermal pad sizes are usually required. TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for smooth, even application over larger areas, while alternatively, the putty can be shaped into small beads that precisely fit components such as VRAM or SMDs. TG Putty can compensate for height differences ranging from 0.2 mm to 3.0 mm. Available Variants:TG Putty comes in three versions, each offering different levels of thermal conductivity: TG Putty Basic – Medium thermal conductivity TG Putty Advance – Good thermal conductivity TG Putty Pro – High thermal conductivity For upgrading a smaller graphics card without an active backplate (e.g., GeForce GTX 1060), a single 30g jar of TG Putty is usually sufficient. For larger models, such as the GeForce RTX 4090, one 30g jar typically covers the memory (VRAM) and voltage regulators (VRM) on the front side. Since high-end graphics cards often have a uniform gap between the PCB and the backplate, fully filling this space may require two 30g jars. Important Notes: TG Putty is not suitable for direct application on processors (IHS or Direct Die) or GPU chips. Before applying, ensure that the target surface is thoroughly cleaned and degreased using TG Cleaning Wipes or standard isopropanol. Package Contents: 1x TG Putty Basic 3x Spatulas
Product Details: Thermal Grizzly - Pro TG Putty Pro is a non-electrically conductive alternative to traditional thermal pads. This easy-to-apply and flexible material serves as a "gap filler," effectively compensating for height differences. It is an ideal replacement for thermal pads on graphics cards, where different pad thicknesses are typically used. When replacing pads or upgrading to a GPU water block, multiple thermal pad sizes are usually required. TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for smooth, even application over larger areas, while alternatively, the putty can be shaped into small beads that precisely fit components such as VRAM or SMDs. TG Putty can compensate for height differences ranging from 0.2 mm to 3.0 mm. Available Variants:TG Putty comes in three versions, each offering different levels of thermal conductivity: TG Putty Basic – Medium thermal conductivity TG Putty Advance – Good thermal conductivity TG Putty Pro – High thermal conductivity For upgrading a smaller graphics card without an active backplate (e.g., GeForce GTX 1060), a single 30g jar of TG Putty is usually sufficient. For larger models, such as the GeForce RTX 4090, one 30g jar typically covers the memory (VRAM) and voltage regulators (VRM) on the front side. Since high-end graphics cards often have a uniform gap between the PCB and the backplate, fully filling this space may require two 30g jars. Important Notes: TG Putty is not suitable for direct application on processors (IHS or Direct Die) or GPU chips. Before applying, ensure that the target surface is thoroughly cleaned and degreased using TG Cleaning Wipes or standard isopropanol. Package Contents: 1x TG Putty Pro 3x Spatulas
Tootekood: PH-F120M25R_G2_DWT01GTIN: 886523003595Jahutid ja lisad
The PHANTEKS M25 Gen2 fans are ideal if you want to combine maximum cooling performance with stylish design. Thanks to their optimized blade design, high static pressure, and integrated RGB lighting with an infinity mirror, they ensure effective cooling along with an impressive look.120-mm PWM fan in whiteDaisy-chaining for fewer visible cablesOptimized for use in front of radiators or behind meshDigitally addressable RGB LEDs and infinity mirrorReverse blade for a clean look and good airflowMax speed: 2,000 RPM at 39.28 dB(A)125.20 m³/h maximum airflow and 1.99 mmH2O static pressureRubber pads at the corners to decouple disturbing vibrations
Zalman ALPHA2 A36 360mm AIO Water Cooling - White The Zalman ALPHA2 A36 360mm AIO water cooler in stylish white is the perfect choice for high-end gaming setups and performance systems. With its generous 360mm radiator, this water cooler offers exceptional heat dissipation, making it ideal for overclocked processors and performance-intensive applications. The ALPHA2 A36's double-sealed pump and quiet, powerful fans ensure long-lasting, reliable cooling with minimal noise levels. The integrated RGB lighting allows for personal customization and gives your system a visually impressive highlight. Thanks to its compatibility with most Intel and AMD sockets, the water cooling system can be easily installed in various systems. The elegant white design complements modern PC builds and harmonizes perfectly with other components. Main features of the Zalman ALPHA2 A36 360mm AIO water cooling in white: Large 360mm radiator surface for maximum cooling performance Double sealed pump for safety and durability Quiet fans for efficient cooling without noise RGB lighting for individual customization Universal compatibility with Intel and AMD sockets Choose the Zalman ALPHA2 A36 360mm AIO water cooler in white for first-class cooling and a modern look – ideal for demanding gaming and high-performance systems!
Very powerful 92 mm PWM fan Optimal cooling with 4,300 revolutions per minute Very high airflow of 98.97 m³/h and static pressure of 6.17 mmH2O 0 dB mode for silent operation Durable hydrodynamic plain bearing ARCTIC P9 Max: Small fan with high performance With the P9 Max, ARCTIC impresses: Despite its small size, the PWM fan is powerful and effectively cools your high-end components in your gaming PC. With its 92 mm size, it is ideal for small cases. Effective cooling for your hardware With an incredible 4,300 revolutions per minute, your components are kept at low temperatures. The high airflow of 98.97 m³/h and static pressure of 6.17 mmH2O also make this fan perfect for mounting on a radiator. The 0 dB mode allows you to throttle the fan down to a standstill, giving you silent operation during idle. In addition, you can generally control the speed to your liking—or the fan can adjust automatically to the current workload. Hydrodynamic plain bearing The P9 Max uses a hydrodynamic plain bearing, ensuring quiet operation even under full load, while also guaranteeing high durability.
The GA II Lite 360 Performance offers high-end cooling performance without visual excess. Instead of RGB fans, you get maximum functionality with whisper-quiet performance. Ideal for users who value performance, durability, and acoustic restraint. 360mm Radiator: Extra cooling surface for overclocked CPUs and continuous loads 3x Performance Fans: High air pressure (5.0 mmH₂O), low noise (29.8 dBA) Tube length 400 mm: For flexible installation, even in large cases Daisy-Chain Fans: Reduced cable effort for clean builds Copper Cooler & long-lasting Pump: Designed for continuous operation Lian Li GA II Lite Performance: High-end cooling - invisibly efficient Three powerful fans and a massive cooling surface enable low temperatures even under peak loads. Whether AMD Ryzen 9, Intel Core i9, or workstation Xeons - this AiO is ready for the highest demands while staying pleasantly quiet. Clean builds without distraction The minimalistic design fits perfectly into studio setups, professional workspaces, or functional gaming PCs. The clean lines and cable-friendly construction underscore the demand for quality and order. Durability at the core The fluid-dynamic fans are characterized by low wear and long lifespans. Together with the strong pump and sleeved tubing system, this results in a maintenance-free solution for systems that simply work - day after day.
Unleash the legend. Embrace the edge. Dragonfang all-in-one liquid cooler is a predator powered by the patented, award-winning high-speed Valkyrie pump. It delivers savage cooling performance and jaw-dropping aesthetics to keep your CPU cool and your build untouchable. Fully rotatable 360° ARGB pump top for ultimate customization High-speed Valkyrie X12 ARGB fans spinning at up to 2150 RPM Compatible with AMD AM5/AM4 and Intel LGA 1851/1700/1200 Valkyrie Hub for simplified cable management (supports up to 7 devices) 5-year international warranty
Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Asus TUF Gaming GeForce RTX™ 5090 32GB GDDR7 (90YV0LY1-M0NA00)- Asus TUF Gaming GeForce RTX™ 5090 32GB GDDR7 OC Edition (90YV0LY0-M0NA00) Technical data coolerDimensions total (L x W x H)235,95 x 155,57 x 34,12mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalNylonMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs9ColortransparentTechnical data backplateDimensions (L x W x H)235,95 x 127,00 x 6mmThick backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms
Tootekood: R-LQ360-BKLSMW-G-1GTIN: 6933412729167Jahutid ja lisad
DeepCool LQ 360 AIO Liquid Cooler: High-Performance Cooling with Innovative Display The DeepCool LQ 360 AIO Liquid Cooler offers a compelling blend of robust cooling and innovative aesthetics, designed for users who demand both performance and visual flair from their PC components. Featuring a 360mm radiator, advanced pump technology, and a unique segment LCD screen, the LQ 360 aims to elevate the AIO cooling experience. Key Features: Powerful 360mm Radiator: The large 360mm radiator provides substantial surface area for heat dissipation, ensuring efficient cooling even for power-hungry CPUs under heavy load or during overclocking. 5th Generation Pump: DeepCool's 5th generation pump is engineered for enhanced performance and reliable coolant circulation, facilitating effective heat transfer. Anti-Leak Technology: DeepCool incorporates its patented Anti-Leak Technology to improve the overall durability and safety of the AIO, reducing the risk of leaks and system damage. Segment LCD Screen: A prominent feature of the LQ 360 is its unique segment LCD screen integrated into the pump housing, offering real-time monitoring of crucial system information. ARGB Lighting: Both the fans and the pump unit are equipped with addressable RGB lighting, allowing for customizable and synchronized lighting effects within your PC build. FD12 ARGB Fans: The included FD12 ARGB fans are designed to deliver a balance of static pressure for radiator fin penetration and airflow for efficient heat removal, while maintaining relatively quiet operation. Efficient Connectivity: A streamlined 8-pin one-to-three cable is used for fan and lighting connections, simplifying cable management within the case. Wide Socket Compatibility: The LQ 360 supports a range of current CPU sockets from both Intel and AMD, ensuring broad compatibility with modern processor platforms. Technical Specifications (Example): Radiator Size: 360mm Fan Type: 3x 120mm FD12 ARGB Fan Speed: 500~2150 RPM ±10% Fan Connector: 4-Pin PWM Pump Connector: 3-Pin Socket Compatibility: Intel: LGA 1700 / 1200 / 115x / 1851 AMD: AM5 / AM4 Noise Level (Fan): ≤32.9 dB(A) LCD Screen: Segment LCD Package Contents: DeepCool LQ 360 AIO Liquid Cooler Mounting Kit for Intel and AMD platforms Thermal Paste Necessary cables
120-mm PWM fan with aluminum framePractical wireless connection for fewer visible cablesDaisy-chaining on the fans for easy connection and mountingIntegrated display for stunning effectsSpeed, LCD, and lighting controllable via Lian Li L-Connect 3 softwareWhisper-quiet cooling with max. 1,900 RPM at 27 dB(A)105.33 m³/h max. airflow and max. 2.9 mmH2O static pressureRubber pads to decouple disturbing vibrationsIncludes controller for controlling lighting and fan speedWireless ARGB LCD Fans for Clean Cable ManagementThe UNI FAN TL Wireless LCD from Lian Li offers an efficient solution for cable management in your PC. With its wireless 2.4 GHz control for lighting effects and fan speed, you need significantly fewer cables, simplifying your system build. The fan offers dual-zone lighting effects and is easy to install and comes with an integrated LCD for displaying system information or individual graphics.Connection System for Seamless Fan ClustersThe installation of the Lian Li UNI FAN TL Wireless series follows the smart concept of other Lian Li fans: The fans are equipped with contact points and are easily connected through the practical connection system. Multiple fans can be joined together into a cluster.UNI FAN TL Wireless LCD: Easy Installation and Full ControlThe UNI FAN TL Wireless LCD can be easily installed and controlled thanks to the L-Wireless controller. Through the wireless connection, you control both RGB lighting and fan speed directly through your motherboard, without the need for unnecessary cables.Adjustable Display and Quiet PerformanceThe LCD version of the UNI FAN TL Wireless allows you to customize the content on the built-in 1.6-inch IPS display. With the L-Connect 3 software, you can display your own videos, images, and system information. Thanks to Fluid Dynamic Bearing (FDB) technology, the fans run quietly and efficiently, even at high speeds of up to 1,900 RPM. This provides powerful cooling and an aesthetically pleasing solution for your PC, making traditional fans fade into the background compared to UNI FAN TL Wireless LCD!
The Lian Li UNI FAN TL LCD Wireless fans impress with their elegant look, visually enhancing any setup. The LCD display allows for extensive personalization of your gaming PC, while the fans keep your hardware cool—even under heavy load. 140 mm PWM fan with LCD display Less cable clutter thanks to a practical plug-in system and daisy-chain connection Full control over fans and display via the L-Connect 3 software Infinity mirror and LED strips on the side provide an elegant look High airflow at 115.7 m³/h and static pressure up to 3.5 mmH2O Lian Li UNI FAN TL LCD Wireless: Fan with display and stylish design The Lian Li UNI FAN TL LED Wireless is a 140 mm fan with standard-oriented fan blades in black. Thanks to its high cooling performance, this PC fan is also suitable for high-end systems. Personalize your build with the LCD display A special highlight of the UNI FAN TL LCD Wireless is the display in the center of the fan. The 1.6-inch screen with a resolution of 400 x 400 pixels can be fully customized to your preferences via L-Connect 3 software—you can display information such as temperature or fan speeds. You can also display your own images, GIFs, or even videos, giving your gaming setup an individualized appearance. Impressive cooling performance High airflow up to 115.7 m³/h and a maximum static pressure of 3.5 mmH2O, combined with speeds of up to 1,600 RPM, result in effective cooling for your gaming hardware. The increased height of 28 mm further encourages cooler temperatures. With a noise level of no more than 28.5 dB(A), the fan remains barely audible even under full load despite its strong cooling performance. Smart plug-in system and daisy-chaining Thanks to the practical plug-in system, individual fans are easy to connect together. You need fewer cables for installation, which keeps your build much cleaner. The Lian Li Wireless Controller, which connects to the motherboard and can be paired with the fans, minimizes cable clutter even further. Please note that the Wireless Controller must be purchased separately. You can also combine the LCD version with the LED version fans, as long as you connect no more than four fans to one controller. The plug-in system is not only practical, but also enables a seamless connection between fans. This particularly benefits the LED strips on the edges—when connected, you can set up striking RGB lighting effects. The infinity mirror also gives the fan a visually appealing look.
3-pack of 120mm PWM intake fans in black with aluminum frame Convenient plug-in system for less cabling 40 digitally addressable RGB LEDs and infinity mirror effect Speed and lighting controllable via software Max. 2,100 RPM at 32 dB(A) 108.05 m³/h maximum airflow and max. 2.02 mmH2O static pressure Rubber dampers for vibration reduction Note: The plug-in system is only compatible with LULI-028, LULI-029, LULI-030, or LULI-031 The Lian Li UNI FAN SL-INF 120 Reverse Blade: Intake fan with extra power! The Lian Li UNI FAN SL-INF 120 Reverse Blade is a 120 mm PWM intake fan. The reverse blade version intake fans allow you to create a uniform look when used with conventional UNI FAN SL-INF fans. With the reverse blade fans, you can create an airflow in the opposite direction while still displaying the stylish side with the infinity mirrors. This ensures that, even with reversed airflow, you always see the aesthetic side of the fan—for a consistent look in your case. As a further development of the UNI FAN SL, it features improved airflow over the UNI FAN SL-INF and is excellent for use on radiators, but also looks great as a case fan. The innovative daisy-chain plug-in system provides a tidy look with minimal cable clutter. A true highlight of the Lian Li UNI FAN SL-INF 120 Reverse Blade is the strong ARGB lighting, which, especially in combination with the infinity mirrors, creates spectacular lighting effects. Installation of the Lian Li UNI FAN SL-INF 120 series follows a clever and unique concept: The fans have pin contacts and are connected via a practical plug-in system. Multiple UNI FAN SL-INF 120 mm fans are connected to form a cluster and no longer need to be connected individually by cable—this saves a lot of time and prevents cable clutter. The pin contacts transmit both power and PWM and ARGB signals. Revised plug-in system for the Lian Li UNI FAN SL-INF 120 series The plug-in system introduced with the UNI FAN SL and AL series has been further improved with the UNI FAN SL-INF 120 series. For one thing, the plug is now removable, which avoids possible collisions with radiator connections and provides a cleaner look. The cable module connector has also been made smaller and relocated to the center of the frame, further facilitating radiator use. The previously separate cables for power and ARGB have been combined into a 7-pin cable that can be oriented in two directions. An adapter to separate the two strands for direct connection to the motherboard is included with the single-version fan. Note: The connectors of the SL-INF series are not compatible with the SL and AL series! Suitable for cases, radiators, and CPU air coolers The hydrodynamic bearing of the Lian Li UNI FAN SL-INF 120 Reverse Blade ensures high smoothness and long lifespan. Thanks to reduced friction losses, higher speeds are achieved at the same power consumption compared to conventional fans. The effective speed ranges from 200 to 2,100 RPM. If desired, the fans can be completely switched off via software. With up to 32 dB(A) at full load, the UNI FAN SL-INF 120 Reverse Blade is not excessively loud and, with a 108.05 m³/h airflow and 2.02 mmH2O static pressure at full speed, offers strong performance values. Strong ARGB lighting and infinity mirrors The Lian Li UNI FAN SL-INF 120 Reverse Blade is equipped with a total of 40 digitally addressable RGB LEDs. They are distributed across the rotor hub and two slim strips in the aluminum frame. On the front of the hub and on two sides, there are also infinity mirrors that uniquely enhance the lighting effects. To control the speed and ARGB lighting, you can connect fan clusters directly to the motherboard via an adapter. They are recognized by the free L-Connect 3 software and can be configured there. Alternatively, you can connect the 7-pin cable to one of the two ports on the L-Connect 3 controller, which is included with the 3-pack versions of the UNI FAN SL-INF fans (LULI-028, LULI-029).
AiO water cooling with a 240 mm large and 30 mm thick radiator High-performance 8th-generation Asetek pump with 2,600 RPM 2x 120 mm ROTA-ARGB fans with high airflow and static pressure Anamorphic 3D AMOLED display with 2K resolution and 60 Hz Simple setup: control fans, pump, and display via KANALI software Compatible with AMD Socket AM5 / AM4 and Intel LGA 1851 / 1700 TRYX PANORAMA ARGB 240: Complete water cooling with unique display The TRYX PANORAMA ARGB AiO water cooling combines advanced technology, customizable ARGB lighting, and a unique 3D AMOLED display to set new standards for your gaming PC both visually and in terms of performance. With a 30 mm thick 240 mm radiator, high-performance ARGB PWM fans, and a reliable 8th-generation Asetek pump, this all-in-one solution delivers excellent cooling for your hardware. Thanks to its thoughtful and flexible design, installation is quick and uncomplicated. Curved 3D AMOLED display ensures unparalleled visuals The main highlight of the TRYX PANORAMA AiO is the anamorphic 3D AMOLED display. This scratch-resistant screen offers you never-before-seen features: Fascinating technology, breathtaking images The curved 3D AMOLED display stands out from anything you have seen before. It creates a stunning 3D depth effect directly in your gaming PC—without the need for cumbersome glasses. The content appears vivid and tangible, whether it's animated wallpapers, breathtaking graphics, or system information. With the KANALI software, you can bring your own 3D images and videos to life directly on the display in full brilliance. The best part? The software is continually updated with new, fascinating content, giving you ever-expanding options to customize your setup. With this water cooling system, every look at your PC becomes a real experience. Efficient performance and reliable cooling The TRYX PANORAMA 240 uses a robust aluminum radiator that ensures effective heat dissipation. The circulating coolant is driven by a high-performance 8th-generation Asetek pump, which, despite its high performance and integrated 30 mm VRM fan, remains especially quiet at just 25.3 dB(A). Thanks to the high-volume tubing, the coolant circulates efficiently, resulting in low and stable temperatures for your components. Powerful and quiet fans with stylish lighting The two included 120 mm fans with customizable A-RGB lighting provide optimal airflow. With a maximum airflow of 112.3 m³/h and a static pressure of 1.88 mmH2O, these fans enable efficient cooling even under intensive use. Despite this, the noise level remains extremely low at just 27.86 dB(A), so you’ll barely hear your high-performance cooling system. Intuitive software integration With KANALI software, the TRYX PANORAMA AiO offers an intuitive control platform. The software allows you to configure display modes and content for the AMOLED display, as well as adjust the A-RGB lighting, fan, and pump speed to your preferences. The software is easy to use and enables you to precisely control and monitor your system. Whether you prefer whisper-quiet operation for office work or maximum cooling performance for demanding gaming sessions—the KANALI software gives you full control.
The classical NF-P12 120mm fan was specially designed for use on CPU coolers and other applications which require high static pressure. This fan has greatly contributed to the reputation of Nuctua for being one of the leading manufacturers of noise.reduced premium components. It continoues to impress users with its excellently smooth and quiet operation as well as excellent performance. The new PWM version is equipped with Noctuas new, especially designed PWM IC for fully automatic control and low power consumption. The renowned SSO bearing and a manufacturer's warranty of 6 years round off the quality concept, making the NF-P12 PWM a reliable premium solution for even the highest requirements. An overview of all features can be found here Technical specifications: Dimensions: 120x120x25mm Colour: Frame: beige/brown, fan blades: brown Connector: 4Pin PWM Voltage operating range: 3,5-14V Airflow: 92,3 m³/h / 54 CFM Airflow with LNA: 63,4 / 37 CFM Nominal speed: 1500 +/- 10% RPM Nominal speed with LNA: 900 +/- 10% RPM Minimum speed: 300 RPM Noise emissions: 19,8 dBA Noise emissions with LNA: 12,6 dBA Static pressure: 1,68 mm H2O Static pressure with LNA: 1,21 mm H2O Current draw: 0,05 A Power consumption: 0,6 W Operating voltage: 12 V An English mounting manual can be found here . This way to an information sheet. Extent of delivery: 1x Noctua NF-P12 PWM ( 120x120x25mm ) Low-Noise adaptor(L.N.A.) 4-Pin Y-cable 30cm cable extension 4x vibration compensators 4x Fan screws Please note the difference between a 4-Pin power connector (Molex) and a 4-Pin fan connector (PWM)
The new generation of compact fan technology is on the market. Multiframe® fans have completely unique multi-piece chassis, which eliminates vibration already inside of the fan. Therefore resonance throughout the system is reduced. Additional measures for noise reduction such as the use of decoupling kits or insulation mats can be spared with these fans. Depending on the case used, Multiframe® fans are able to reduce the fan-induced noise below the noise from the airflow itself. Multiframe® fans are than "more silent than the air". The new Multiframe® technology has a array of new features: The integrated vibration absorbers are just one of the new features that all contribute to noise reduction. For example the vibration absorbers are wider than the chassis to avoid any contact between case and vibrating parts. The use of massive and heavy materials in the fan leads to a lowering of the noise's frequencies, therefore making it less audible and more comfortable to the human ear. Aerodynamic optimization of frame and strutting also reduce noise by air swirling. This reduces a majority of the noise through airflow and therefore a large part of the overall noise level of the fan. The other parts of the Multiframe® fan series are also on the highest technological level. The improved EKAplus motor is voltage-independent extremely quiet and has an especially low starting voltage. The bearing used is the new NB-NanoSLI® bearing, which is especially quiet and has a long lifespan thanks to a special lubrication system. The fan is also equipped with a reliable auto-restart mechanism and is protected against polarity reversal. Interesting is the fact that the noise level of the Multiframe® series is almost completely dependent from the case they are installed in, as noise produced directly by the is reduced to a minimum and usually below the noise level of the airflow. Thereby these fans are more quiet than their airflow. With this new generation and advance in noise reduction more and more responsibility for noise reduction is in the hands f the case manufacturers. If full advantage is to be taken of these fans an aerodynamically optimized case has to be used, which does not obstruct airflow with tight meshes or other obstructions. Technical details: Dimensions: 80x80x25mm Speed (+- 10%): 1700rpm Airflow: 47m³/h Noise level: 14 dB(A) Voltage range: 4,5-13,8V Starting voltage: 4,5V Power consumption: 1,2W Warranty: 6 years
