Jahutid ja lisad

The Phorcys Evo water cooling set from Raijintek offers everything you need for CPU water cooling. The Phorcys Evo is ideal as an entry point or as the foundation stone for a water cooling system. Due to its modular design, it can also be easily expanded and due to the high-quality components it is also something from which the user benefits for a long time. The CWB-RGB cooler can handle even a hot CPU without any problems, while the Calore C240D Radiator, with its two 120mm iris fans, effectively cools down the water temperatures. The fans have addressable RGB LEDs. The flow is provided by the stylish D5 RBW pump with equalizing tank. The pump also has addressable RGB LED lighting. The components are connected to the Raitubo-Hard Tubes and the fittings. Raijintek has also thought of an individual design for the set. Two Raiaqua bottles are included, the crystal-clear liquid of which can be adjusted as required using the colouring agents supplied. Since the pump, the CPU cooler and the fans have RGB LED lighting, they can be synchronized and controlled with the included controller. Up to 16.8 million colours and many effects are available. Technical Data: Radiator: Dimensions: 282.5 x 119 x 65.5 mm (W x D x H) Material: Copper Color: Black Weight: 1191 g Pump/Tank: Dimensions (Total): 87,4 x 280,6 x 91,2 mm (W x H x D) Dimensions (Tank): 64 x 205 mm (Ø x H) Material: POM + PMMA, Steel, Plastic Color: Black (pump), Transparent (expansion tank) Throughput: 900 L/h Pressure: max. 50 PSI Volume: max. 30 dB(A) Revolutions: 1.800, 2.500, 3.200, 3.900, 4.500 rpm Voltage: 12 V Current: 1,8 A Lighting: Addressable RGB Life: 50.000 h Weight: 790 g Fan: Dimensions: 120 x 25 x 120 mm (W x H x D) Colour: Black / Transparent (frame) / RGB (LEDs) Bearing Type: Plain Bearing Speed: 1.800 rpm Delivery Volume: max. 71.65 m³/h Static Pressure: max. 1.7 mm H2O Volume: max. 26.5 dB(A) Voltage: 12 V Starting voltage: 6 V Connection: 4-Pin PWM Life expectancy: 40.000 hours Scope of delivery: 1x CWB-RGB CPU cooler, 1x Antila D5 RBW pump/reservoir, 1x Calore C240D Dual Radiator (240 mm), 2x Iris 12 RBW ADD 120 mm fan, 4x Raitubo-H14 Hard-Tubes, 14/10 mm - transparent, 6x G1/4" to 14/10 mm outer/inner diameter (OD/ID) Hard-Tube connectors, 90° angle - black, 6x G1/4 in. to 14/10 mm OD/ID Hard Tube Connections, straight - black, 2x Raiaqua-T1 coolant, 500 ml each, 6x colorant (2x blue, green, red), 1x 8-port RGB controller for addressable LEDs incl. remote control, 1x thermal compound, Mounting material for radiator, fan, AMD and Intel socket Compatibility: Intel socket: LGA 775, 115x, 1366, 201x, 2066, AMD socket: AM2(+), AM3(+), AM4, FM1, FM2(+)

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3080/3080 Ti/3090 ROG-Strix-Grafikkarten von ASUS, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

GPU-Wasserkühler im Full-Block-Design, für ASUS Strix/TUF RTX 4090-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus transparentem Acryl, integrierte D-RGB-Beleuchtung

All-In-One Full-Cover-Wasserkühlung von Alphacool, für RTX 3080/3080 Ti/3090 TUF-Gaming-Grafikkarten von ASUS, mit 360-mm-Vollkupfer-Radiator, drei 120-mm-RGB-Lüfter, vernickelter Kühlerboden + Acryldeckel, eingebaute DC-LT-2-Pumpe, digital adressierbare RGB-LED-Beleuchtung, erweiterbar durch Schnellverschlüsse

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.Fullcover Waterblock?The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.Chrome-plated copperThe cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.PumpThe Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.Fittings and TubingAs with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.ExpandabilityBy using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.Lighting and fansThe Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.NexXxoS RadiatorAs with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.Technical note!Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility:- XFX Speedster MERC 310 Radeon RX 7900 XT Black Edition, 20GB GDDR6 (RX-79TMERCB9)- XFX Speedster MERC 310 Radeon RX 7900 XT, 20GB GDDR6 (RX-79TMERCU9)- XFX Speedster MERC 310 Radeon RX 7900 XTX Black Edition, 24GB GDDR6 (RX-79XMERCB9) Technical data radiatorDimensions (L x W x H)395 x 124 x 30mm (+/- 3%)Material cooling fins, chambers & channelsCopperMaterial threadsBrassMaterial outer housingstainless steelG 1/4“ threads2 x for tubes (+ 1x Fillport G1/4“)For fan size120 mmOptions for fan assembly3 x one-sided / 6 x both-sidedTechnical data cooler and pumpDimensions (L x W x H)287,10 x 145,00 x 71,43mmMaterial cooler bottomChrome plated copperMaterial cooler topacrylicThreads2 x G1/4“Pump typeDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13.5V DCPower consumption3.2WMTBF50.000 hTechnical data liquidColorclearIngredient 1Destilled water (CAS-number 7732-18-5)Ingredient 2Glysantin (CAS-number 1017-21-1)Working temperatures-15 C° / +90 °CTechnical data quick fastenersDimensions (L x D)95 x 27mmMaterialNylonFor tube size12,7 / 7,6mmColorBlackTechnical data fittingsL x D straight fitting24 x 18mmQuantity straight fittings2xL x B x H 90° fitting35 x 27 x 17mmQuantity 90° fittings2xFor tube size12,7 / 7,6mmMaterial fittingsBrassTechnical data tubeLength50cmMaterial tubeTPV (EPDM/PP)ColorMatt blackTube size12,7 / 7,6mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VDimensions (L x W x H)120 x 120 x 25mmNet weight187gMax working temperature60°C

ASUS ROG Strix LC 360 RGB White Edition.

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS XT45 Full Copper 360mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 391,5 x 124 x 45mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 12 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 420mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 140mm fans The fans can be controlled from 0 to 2000 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (154.1 m3/h) coupled with high static pressure (2.20 mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 24 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 455,5 x 144 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 140mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 140 x 140 x 25mm Speed 0 - 2000 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 6,6 Watt (max) Static pressure 2,20 mm/H2O Max. air flow 154,1 m³/h Noise max. 38,4 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 24 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

All new Flat (FLT) series EK-Quantum Kinetic FLT DDC pump-reservoir units! The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine DDC pump! Each unit is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of six G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.EK-Quantum Kinetic FLT DDC series pump-reservoir units are equipped with genuine DDC 3.25 pumps, made in Europe, which are capable of delivering flow rates of 1000 liters per hour with a maximum head pressure up to 5.2 meters! These new FLT series combo units are available in three different sizes of 120mm, 240mm, and 360mm.The new flat-shaped pump-reservoir units are to revolutionize the way you were thinking about combo units and loop building. Since 120mm fan mounting patterns are the most dominant mounting options inside PC cases these days, these new Kinetic FLT DDC combo units will allow greater flexibility for installation since they don't require drilling of new mounting holes on your case.The combo unit is equipped with a total of six industry-standard G1/4" ports, which can be, based on the orientation of the unit, used as inlet and outlet ports, as well as fill and drain ports.The reservoir is manufactured of premium quality acrylic material, machined to perfection, while the sealing is performed by a quality EPDM o-ring. Alongside the reservoir is a black anodized aluminum cover under which the Addressable D-RGB LED strip is placed. Proper LED implementation is one of the main focus points of EK so that there are as few visible "LED hotspots" as possible.Pump electrical and mechanical properties:- Motor: Electronically commuted ball bearing motor- Rated voltage: 12 V DC- Power consumption: 18 W- Maximum head pressure: up to 5.2m- Maximum flow rate: up to 1000 L/h- Maximum liquid temperature: 60 °C- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal- Power connector: 4-Pin Molex- and 4-Pin PWM FAN connectorOperational regime:- PWM duty cycle: ~ 20-100%- Default behavior: Runs at 100% duty cycle when no PWM feedback signal is presentEnclosed:- EK-Quantum Kinetic FLT 120 PWM D-RGB- Mounting mechanism with all necessary screws for 120mm fan mounting- Pair of EK reservoir holders with mounting screws- 4 × G1/4 Plugs - 1 × Allen key for reservoir holdersMade in Slovenia - EU!Pump motor made in Hungary - EU!PLEASE NOTE:Do not clean the reservoir with alcohol derivates or other solvents as the acrylic may crack!Coolant and additional plugs are just for showcase and are not delivered with the product!The DDC pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry.

Wärmeleitpad für Höchstleistungen, 3 mm Stärke, 100 x 100 mm Größe

High-End-CPU-Wasserkühler für Enthusiasten, speziell für AMD sTRX4-Sockel, Kühlerboden aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, hochwertige Verarbeitung und edles Design, modulare Konstruktion mit austauschbaren Komponenten, integrierte D-RGB-Beleuchtung

Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung

Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung

NZXT Liquid Cooler with LCD Display Kraken Z53

NZXT CPU water cooling Kraken Elite 360 RGB LCD

Product kirjeldus: Fractal Design Lumen S36 RGB - protsessor liquid cooling system Product Type: protsessor liquid cooling system Package Content: ARGB kaabel, 3 Aspect 12 RGB fans Compatibility: LGA1156 Socket, Socket AM2, Socket AM2+, LGA1366 Socket, Socket AM3, LGA1155 Socket, Socket AM3+, LGA2011 Socket, Socket FM1, Socket FM2, LGA1150 Socket, Socket FM2+, LGA2011-3 Socket, LGA1151 Socket, Socket AM4, LGA2066 Socket, LGA1200 Socket Fans kogus: Triple Fan Diameter: 120 mm Fan Bearing: Rifle bearing pöördekiirus: 500-2000 pööret minutis õhuvool: 13-56 cfm müratase: 10 - 33.2 dBA nominaalpinge: 12 V Features: Copper coldplate, pre-applied thermal compound, PWM control, kummist tubes(400 mm), addressable RGB LED 6-32 thread, ASUS Aura Sync technology, MSI Mystic Light Sync toetatud, sleeved tubes, Razer Chroma toetatud, GIGABYTE RGB Fusion 2.0 toetatud, ASRock Polychrome Sync toetatud Manufacturer Warranty: 5-year garantii

Full-Cover-Waterblock von EK Water Blocks, für NVIDIA GeForce RTX 3090 Ti Founders Edition-Karten, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung

GPU-Wasserkühler im Full-Bock-Design, für NVIDIA GeForce RTX 3090 Founders Edition-Grafikkarten, transparenter Acrylglas-Deckel, Kühlkörper aus vernickeltem Kupfer, integrierte und adressierbare D-RGB-Beleuchtung, inkl. Backplate und zwei Anschlussterminals

NZXT Kraken Z63 - 280mm AIO Liquid Cooler with RGB LED

Full-Block-Wasserkühler in Schwarz, für NVIDIA RTX 3090 FE-Grafikkarten, inklusive Backplate, austauschbare Terminals

AMD Radeon Edition

This is a Special Edition Black EK water block enclosure engineered for the latest NVIDIA® GeForce® RTX ™ 3090 Founders Edition graphics cards. The cooling engine is the evolution of the 2nd generation EK® Quantum Vector GPU water blocks. This water block enclosure is only compatible with GeForce® RTX™ 3090 Founders Edition graphics cards. Special Edition EK Water Block for Nvidia FE GeForce RTX 3090 The EK-Quantum Vector FE RTX 3090 D-RGB water block enclosure is the most complex GPU cooling solution developed by EK to date. Aside from the small form factor and unique shape of the RTX 3090 Founders Edition PCB, EK has built a hybrid cooling solution for the backplate that is so far unique to the EK-Quantum Vector FE RTX 3090 water blocks and their backplates. The water block is purpose-designed with an extremely thick copper base for high-performance, allowing it to clear all components of the densely-packed PCB and adding more heat capacity in the process. The cooling engine used in this water block is the largest we've built to date, having roughly 30% more surface area than the rest of the Vector water blocks. Build Quality Like the Magnitude CPU water block, the entirety of this water block is CNC-machined without mass-production techniques. The block's base is milled out of a 12 mm thick piece of pure electrolytic copper sourced from Europe, which is then nickel-plated, while its top is CNC-machined out of a glass-like cast Acrylic material. The external enclosure, which is not in any contact with the coolant, is machined out of a 20 mm thick solid piece of aluminum, which is afterward anodized into a black color. The included single-slot I/O shield is supplied with special screws for attaching it to the aluminum enclosure in order to even out the entire water block's weight distribution. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. Cooling Engine This Special Edition Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as cooling liquid is channeled right over these critical areas. The water block is in contact with MOSFETs and chokes to maximize cooling and minimize the chances of unwanted coil whine. The flow paths are optimized to reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The integrated Open Split-Flow cooling engine design proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry are optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. Fin array is populated by 31 microfins with 0.6 mm wide microchannels that provide exceptional cooling performance without unnecessary flow restrictions or clogging hazards. Hybrid Backplate This water block comes with an included backplate that makes sure the entire graphics card is enclosed and not at all visible. The aluminum CNC-machined backplate has a ribbed texture in order to increase surface area for additional passive cooling power. The "active" cooling part is achieved through a section of the backplate contacting the coldplate, which is then directly cooled by the liquid. The Black variant of this Special Edition water block has a natural anodized aluminum backplate. Special Terminal Design The water block is delivered with a set of connection terminals, allowing users to swap them out based on their needs. One terminal has two direct G1/4" ports on the side, while the other one is more conventional, having four G1/4" ports going through the terminal. The new design allows terminals to be directly attached to the copper cold plate of the GPU water block, making it more rigid and reducing the chances of damage. The terminal is neatly located between two prongs on the PCB, utilizing minimal space. This kind of design allows for incredible versatility, especially for Small Form Factor builds, and of course, more interesting aesthetics. D-RGB Lighting on the EK-Quantum Vector FE RTX 3090 D-RGB Water Block This water block boasts a whopping 23 individually addressable D-RGB LEDs that illuminate both the water block's interior and the terminal itself. It is compatible with all popular RGB Sync technologies from major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Technical Specification Dimensions: (LxHxW) - 213x122x29mm D-RGB cable length: 500mm D-RGB LED count: 23 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Thermaltake vesijahutus - Pacific C360 DDC LCS RGB (120mm*3, copper, Soft Tube,läbipaistev coolant)

SCYLLA PRO CA240, Raijintek’s Komplettset an Hardtube-Watercooling Kit. Eine erstklassige DIY Water Cooling Solution in Premiumqualität für Ihre Maschine. Ein Vollkupfer-FORKIS PRO RBW-CPU-Wasserblock, eine leistungsstarke ANTILA D5 EVO RBW ADD-Pumpe / Reservoir-Kombination, einen Vollkupfer 240-mm-Radiator, 2 Flaschen 500 mml RAIAQUA-T1 Pure Clear Premium-Coolant, 3 EOS 12 ADD PWM-Lüfter mit einem hohen statischen Druck, 12 Vollkupfer-Fittings 90° * 6 & 180° * 6, 4 * 500 mm PETG-Hartrohren und ein 5-Port-5-V-adressierbarer (Rainbow) CONTROL HUB mit einem 5-Port-PWM und Fernbedienung, einem M / B-Anschluss Kabel zur Synchronisation mit Ihrem M / B oder per Fernbedienung. Raijintek bietet allen Enthusiasten das beste Erlebnis beim Bauen mit DIY WATER COOLING SYSTEMEN. Technische Daten: Radiator: Typ: Calore Elite CA240 Maße: 273 x 120 x 27 mm (L x B x H) Gewicht: 571 g Material: Kupfer Farbe: Schwarz Finnendichte (FPI): 17 Pumpe/Ausgleichsbehälter: Typ: ANTILA D5 RBW Maße (insgesamt): 80 x 305 x 95 mm (B x H x T) Maße (Ausgleichsbehälter): 60 x 220 mm (Ø x H) Gewicht: 1.260 g Material: POM, Glas, Aluminium, Stahl Farbe: Schwarz (Pumpe), Transparent (Ausgleichsbehälter) Förderhöhe: 4 m Durchsatz: 1.500 L/h Druck: max. 50 PSI Lautstärke: max. 40 dB(A) Umdrehungen: 1.800, 2.500, 3.300, 4.000, 4.800 U/min Anschluss: 4-Pin Molex, 2510-3P (3-Pin Lüfter) Spannung: 12 V Stromstärke: 2,5 A Beleuchtung: ARGB Lebensdauer: 50.000 h Kühler: Typ: FORKIS PRO RBW Maße: 82 x 16 x 82 mm (B x H x T) Gewicht: 720 g Material: vernickeltes Kupfer (Kühlerboden), Aluminium (Cover), Acrylglas (PMMA, Deckel) Farbe: Schwarz, Transparent Kompatibilität: Intel-Sockel: LGA 775, 115x, 1366, 201x, 2066 AMD-Sockel: AM2(+), AM3(+), AM4 RGB/Lüfter-Controller: Typ: ARGB, 3-Pin RGB (5VDG, 5V) Anschlüsse: 5x ARGB, 5x 4-Pin PWM Lüfter: Typ: EOS 12 RBW ADD Anzahl: 2 Stück Maße: 120 x 25 x 120 mm (B x H x T) Gewicht: ca. 260 g Farbe: Schwarz, Weiß Lagertyp: Gleitlager Drehzahl: 800 bis 1.800 U/Min Fördervolumen: max. 127,4 m³/h Statischer Druck: max. 2,3 mmH2O Lautstärke: max. 28 dB(A) Spannung: 12 V Startspannung: 7 V Anschluss: 4-Pin PWM, 5V ADD Header Lebenserwartung: 40.000 h Lieferumfang: 1x FORKIS PRO RBW CPU-Kühler 1x ANTILA D5 RBW Pumpe/Reservoir 1x Calore Elite CA240 Dual Radiator (240 mm) 2x EOS 12 RBW ADD 120-mm-Lüfter 4x RAITUBO-H14 Hard-Tubes, 14/10 mm (OD/ID), 500 mm - transparent 6x 14/10 auf 14/10 mm Außen-/Innendurchmesser (OD/ID) Hard-Tube Anschlüsse, 90°-Winkel - schwarz 6x G1/4 Zoll auf 14/10 mm Außen-/Innendurchmesser (OD/ID) Hard-Tube Anschlüsse - schwarz 2x RAIAQUA-T1 Kühlflüssigkeit, je 500 ml 1x 5-Port ARGB-Controller inkl. Fernbedienung 1x Wärmeleitpaste Montagematerial für Radiator, Lüfter, AMD- und Intel-Sockel

GPU-Wasserkühler mit aktiver Backplate, für RTX 3080/3090-Grafikkarten im Referenz-Design, Kühlkörper aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, integrierte D-RGB-Beleuchtung

Fan speed (max): 1500 Fan speed (min): 500 Number of fans: 3

Wasserkühler für Sockel 3647 Narrow P für High-End-CPUs von Intel, inklusive Waterblock für VRMs auf dem Mainboard ASUS ROG Dominus Extreme, für Custom-Wasserkühlungen, vernickelter Vollkupfer-Heatsink + transparenter Acryldeckel, integrierte digital adressierbare RGB-LED-Beleuchtung

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 360mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 391,5 x 124 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für MSI Trio und Suprim 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (current models such as GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Note regarding shipping: This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications: Power: 1/2 PS Cooling capacity: 110W Recommended coolant flow: 200-1000 l/h Weight: 9,2kg Cooling agent: R134A Dimensions: 338x218x325mm (LxWxH) Connector outside diameter: 11-13mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 0.8 A (50 Hz) current drain: 184 W Scope of Delivery 1x Waterchiller Hailea Ultra Titan 150 2x 45° angle with rubber seal 2x 45° angle without rubber seal 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen

Kühlblock und Backplate mit aktiver Kühlung, für ASUS Strix/TUF GeForce RTX 4090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung

The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Notes regarding shipment: For shipping via parcel delivery (GLS) we have manufactured a specially padded carton. For handling and packaging we must charge 15€ incl. VAT. This charge is not charged when the Chiller is picked up or with pallet shipment if the chiller is shipped without the special packaging. Note regarding shipping: This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications: Power: 1/10 PS Cooling capacity: 165W Recommended coolant flow: 250-1200 l/h Weight: 15kg Cooling agent: R134A Dimensions: 420x248x365mm (LxWxH) Connector outside diameter: 11-13mm and 14-17mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 1.1 A (50 Hz) current drain: 253 W Scope of Delivery 1x Waterchiller Hailea Ultra Titan 200 2x 45° angle with rubber seal (11-13mm) 2x 45° angle with rubber seal (14-17mm) 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx

Thermaltake CL-W242-CU12SW-A

NZXT Kraken Z73 - 360mm AIO Liquid Cooler with RGB LED

With the Core Hurrican HardTube water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Eisblock XPX Aurora Edge CPU CoolerAlphacool's Eisblock XPX Aurora Edge CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel.Eisbecher Aurora D5 250mm & VPP Apex PumpThe Alphacool Eisbecher Aurora glass reservoir uses a real glass tube rather than the usual plastic tube that Alphacool usually relies on. The embedded 5V digital RGB LED ring and the new design makes the reservoir look magnificent. Of course, the Lighttower water effect is used again. The mounting can be done via feet but also mounted on 120 or 140mm fan mounts or even directly to a radiator. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. Via the 4-pin fan connector, the speed of the pump can be read and controlled via PWM signal. The Apex VPP is supplied with power via the SATA connector.NexXxoS XT45 Full Copper 360mm Radiator V.2All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop.Rise Aurora 120mm fansThe fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan.Eisrohr 16/13mm PETG HardTubeThe Alphacool Eisrohr PETG HardTube givse the user the possibility to create a very special look. With a wall thickness of 3 mm, the tubes are very strong, but can still be bent without great effort and they are easy to fit. The HardTubes are clear and will look great in almost every water cooling loop. When cutting the tubes, make sure to chamfer the edges with fine file or a hose deburrer, as sharp edges can damage the O-rings of fittings.Eiszapfen 16/13mm G1/4" ConnectionsAll the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off.Thermal Paste & CoolantThe included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle.aRGB Controller, Cables, Tools & AccessoriesAll cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like filling bottle, deburrer and pit saw. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility:Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data CPU coolerDimensions (L x W x H)70 x 70 x 32,5mmMaterial coolernickel-plated copperMaterial housingbrass, acrylicThreads2 x G1/4“Illumination3-Pin 5V, 15 digital aRGB LEDsMax working temperature60°CPressure tested0,8 BarTechnical data reservoirDimensions (L x W x H)77 x 77 x 242mmCapacity250mlMaterial housingAcetalMaterial tubeGlassMaterial framing barAluminiumThreads1x G1/4“ IT IN | 4x G1/4“ IT OUTIllumination5V digital addressable LED‘s (0,3A)Max working temperature60°CPressure tested0,8 BarTechnical data pumpDimensions (L x W x H)65 x 65 x 41mmMaterialsynthetic material, aluminium, ceramicsThreads4Pin PWM I SATARotational speed2500 - 4500 RPMOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25mMaximum flow rate340L/hMax working temperature60°CPressure tested0,8 BarTechnical data radiatorDimensions (L x W x H)391,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4"Possible fan size120mmPossible fan assembly3x one-sided / 6x both-sidedFin density12Max working temperature60°CPressure tested0,8 BarTechnical data fanDimensions (L x W x H)120 x 120 x 25mmSpeed0-2500 rpm (+/-10%)Threads4-Pin PWMVoltage12V DCCurrent consumption0,65A (0.72A max)Static pressure3,17 mm/H2OMax. air flow118,9 m³/hNoisemax. 31,5 dB(A)Speedometer signalyesAuto-RestartyesIllumination3-Pin 5V, 20 digital aRGB LEDsTechnical data tubeDimensions (outer/inner)16/13mmMaterialPETGLength4x 60cmColorclearTechnical data 16/13mm G1/4" fittingsMaterialbrassThreads1x G1/4" OTColorblackTechnical data coolantIngredientsosmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%)Boiling point105°CFreezing point-10°CPackaging unit1L bottleColorclear (not UV-active)Technical thermal greaseViscosity (mPa. s)3.000.000Specific Gravity (g/cm³)2,7Thermal Conductivity (w/m-K)16Temperature Stability (Degree Celcius)-50 ~ 200Colorgray

105 W 5,6GHz AM5 140MB Cache Tray