CTE C750 TG ARGB Snow Full Tower case The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB Snow is a high-end presentation case that allows you to imagine something outside the box. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Snow Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance.
Midi-Tower PC case, tempered glass side panel, mesh front, 5x Kolink Umbra ARGB PWM fans, supports GPUs up to 330 mm, power supply shroud, compatible with ATX motherboards
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
White midi-tower with wood decor, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel, with wood front.
Compact white mini-caseUp to five fans and breathable mesh ensure efficient airflowSupports motherboards up to Micro-ATXSpace for graphics cards up to 335 mm and CPU coolers up to 170 mm in heightConvenient carrying handle for transportThe Jonsbo C6 MAX: Portable mini-case with surprisingly ample spaceThe Jonsbo C6 MAX is a mini-case that provides enough space for high-end components despite its small size. Fans and breathable mesh on multiple sides ensure excellent airflow, efficiently cooling your hardware. Additionally, the tower is easy to transport with the practical carrying handle. If you have always wanted to take your gaming PC everywhere, the C6 MAX is worth a look!Efficient cooling with fans and radiatorsGood airflow is especially important in a small tower. Therefore, the C6 MAX can accommodate up to five fans. The top can hold either two 120 mm fans or one 140 mm fan, while the bottom can accommodate two additional 120 mm fans. The rear also supports a 120 mm fan. Together with the mesh on the top and front, this ensures that your hardware remains cool even in performance-intensive games.Space for your high-end hardwareThe mini-tower supports the installation of graphics cards up to 335 mm in size. Motherboards up to the Micro-ATX format are possible.The CPU cooler should not exceed a height of 170 mm, while the power supply can be up to 220 mm. A 2.5-inch or 3.5-inch drive can be installed for storing programs and games. Note that the fans on the bottom cannot be installed if you choose the 3.5-inch drive.
Evolv X2 Redefine the desktop computer The Evolv X2 redefines the desktop computer with its see-through glass design, aluminum interior, and powerful vertical cooling solution. The entire chassis floats above its base, drawing in surrounding air and channeling it efficiently through the GPU and CPU. Hot air is expelled through the top ventilation, enhancing thermal performance. The interior of the Evolv X2 has been carefully designed to blend with the hardware components for a fully integrated look, with all cooling components sitting flush into the top and base. The integrated lighting and high-quality aluminum internal panels add flair to your system.
The Lian Li Vector V100 combines a stylish yet minimalist design with high compatibility and a special cutout for extra individuality. With this desktop case, you get the perfect frame for your next gaming PC. Black midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Room for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm RGB fans included Cutout with removable cover for collectibles The Lian Li Vector V100: A midi-tower with stylish design and plenty of space for hardware With the Vector V100, you can express your personality. Thanks to tempered glass on the side and front, you have an unobstructed view inside your tower, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles – you can showcase your interests here. If you don't need the cutout, you can simply cover it with the removable lid. Extensive cooling options Four 120 mm ARGB fans are pre-installed in the case – three reverse fans on the side and one standard fan at the rear. Thanks to their reverse fan blades, the side-mounted fans provide efficient airflow – and look just like regular fans. Additional options for installing extra fans can be found on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top. The dust filter at the bottom is easy to remove, so you can clean it whenever necessary. Easy installation of your gaming hardware The Vector V100 offers ample space for your components – even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, you’ll make your build a real eye-catcher.
Darkflash DS900WD computer case (black) + 4 fansDarkflash DS900WD is a modern solution for demanding users who value both aesthetics and functionality. The distinctive design with a panoramic design without an A-pillar, equipped with a single transparent glass wall and a wooden front, not only looks impressive, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. The kit includes 4 fans.Durability and aestheticsThe Darkflash DS900WD stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and solid construction ensure stability and security for all computer components, which is especially important when expanding the system.Effective coolingEvery computer needs a good cooling system, and the DS900WD provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use. In addition, 4 high-performance fans are included, which blend perfectly with the interior of the case.Protection and ease of useThe case is designed to protect the computer's interior from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900WD is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis. ManufacturerDarkflashModelDS900Enclosure typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x2Expansion card slots7Max PSU length250 mmMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10 (120 mm) or 2 (140 mm)Fan mounting optionsTop: 120 mm fan x3 or 140 mm fan x2; Rear: 120 mm fan x1; Side: 120 mm fan x3; Bottom: 120 mm x3Water cooling mounting optionsTop: 240 / 360 mm; Side: 240 mmNumber of fans installed4Type of installed fansARGBButtons and controlsPower, Reset, LEDConnectorsUSB 3.0 x1, USB2.0 x2, HD AudioMaterialTempered glass, 0.5 mm SPCC, woodColorblackHeight454 mmWidth218 mmDepth434 mmWeight6.53 kg
The Jonsbo Z20 Mesh is a stylish and functional Micro-ATX case, specially designed for PC enthusiasts who value a compact design and optimal cooling. With its mesh front and side panel, it offers excellent airflow. Mesh front and side panels allow for optimal cooling Compact size with carrying handle – Perfect for on the go Supports graphics cards up to 363 mm in length for high-end GPUs USB 3.1 Type-C port on the front for fast data transfer Compact dimensions save space without compromising performance Efficient Cooling and Modern Design The Z20 Mesh is specially designed for first-class airflow and ensures efficient cooling of your components. Thanks to its well-designed mesh panels and optimized air guidance, your PC system stays cool and powerful even under heavy load. Benefit from high compatibility despite its compact build. The case offers space for large GPUs, powerful cooling systems, and cable management – without appearing bulky. Versatile Compatibility and Easy Installation This case supports both Mini-ITX and Micro-ATX motherboards and offers flexible mounting options for various hardware configurations. The thought-out interior design makes installation and cable management easy. User-Friendly Front Ports With a USB 3.1 Type-C port, a USB 3.1 Type-A port, and headphone and microphone jacks on the front, the Z20 Mesh provides fast and convenient access to important connections for your peripherals. The integrated carrying handle makes the Z20 Mesh perfect for easy transport – ideal for LAN parties, events, or flexible setups.
Spacious mid-tower case with tempered glass side panel, supports up to 6 fans, space for radiators up to 360 mm, compatible with motherboards up to Micro-ATX, accommodates GPUs up to 365 mm long and CPU coolers up to 163.5 mm tall, supports up to three drives, and includes four 120 mm ARGB fans.The Cooler Master Elite 302 is a versatile mid-tower case designed for budget-friendly PC builds that prioritize efficient airflow, contemporary interfaces, and ample room for today’s hardware. Perfect for compact gaming or all-purpose systems. Fine mesh front panel maximizes internal airflow Compatible with Micro-ATX and Mini-ITX motherboards Supports graphics cards up to 365 mm and CPU coolers up to 163 mm Room for up to 6 fans or a 360 mm front radiator Front panel with USB 3.1 and HD audio ports Compact design with effective ventilation The Elite 302 features an open mesh front that significantly enhances airflow to both CPU and GPU. Four 120 mm fans come pre-installed, and there is space to add up to two additional fans or mount a 360 mm radiator at the front. Spacious interior despite compact footprint With support for graphics cards up to 365 mm in length and ATX motherboards, the case provides sufficient room for modern components. CPU coolers up to 163 mm high and power supplies up to 160 mm long can be easily accommodated. Robust features for modern setups The case front comes equipped with two USB 3.1 ports and HD audio. Dust filters on the bottom, front, and top keep your system clean, while the minimalist design and white finish blend into any environment.
