CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Tootekood: DS900 White + fansGTIN: 5905316148963Korpused
Computer case Darkflash DS900 (white) + 7 ARGB FansDarkflash DS900 is a modern solution for demanding users who value both aesthetics and functionality. The distinctive white design with a panoramic design without an A-pillar, equipped with double fully transparent glass walls, not only looks striking, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. In the set you will find 7 ARGB 120 mm fans.Durability and aestheticsThe Darkflash DS900 stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and sturdy construction provide stability and security for all computer components, which is especially important for system expansion.Effective coolingEvery computer needs a good cooling system, and the DS900 provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use.Protection and ease of useThe case is designed to protect the inside of the computer from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900 is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis.IncludedHousing120 mm Fan DM12F x 7ManufacturerDarkflashModelDS900ColorWhiteDimensions434 x 218 x 454 mmMaterial0.5 mm SPCCCompatible motherboardsATX/M-ATX/ITXHDD/SDD2/2Number of additional slots7Maximum VGA length425 mmMaximum CPU height170 mmPower supplyATX at the bottomHeatsink systemSide: 120 mm x 3; Rear: 120 mm x 1; Top: 120 mm x3/140 mm x 2; PSU: 120 mm x 2; HDD: 120 mm x 1.Front panelTempered glassLeft panelTempered glassI/OUSB 3.0 x 1/ USB 2.0 x 1/ LED/Power/Reset/HD Audio switch
Tootekood: Z9 Iceberg MS WhiteGTIN: 8809213765216Korpused
Zalman Z9 Iceberg MS ATX Case - White, Tempered Glass The Zalman Z9 Iceberg MS ATX case in stylish white brings together modern design and innovative functions for PC enthusiasts and gamers. With the high-quality tempered glass side window, this case offers a perfect presentation of the installed hardware and allows RGB components to be shown off to their best advantage. This versatile midi tower case supports ATX, Micro-ATX and Mini-ITX motherboards , making it suitable for a wide range of PC builds. Thanks to the sophisticated airflow structure with generous ventilation openings and the option to install up to 6 fans , the system remains optimally cooled even during intensive use. In addition, integrated dust filters protect the hardware and ensure a clean interior. The case's I/O panel offers practical ports such as USB 3.0, USB 2.0 and HD Audio , which increase convenience and connectivity. With its minimalist, elegant design in white, the Zalman Z9 Iceberg blends seamlessly into any environment and is guaranteed to be an eye-catcher. Main features of the Zalman Z9 Iceberg MS ATX case in white: Elegant tempered glass side window for best hardware visibility Support for ATX, Micro-ATX and Mini-ITX motherboards Maximum cooling with space for up to 6 fans Integrated dust filters for a clean interior Stylish white design for a modern look Choose the Zalman Z9 Iceberg MS ATX case in white if you value style and performance. Ideal for gamers, PC builders and anyone looking for an aesthetic and powerful solution!
Tootekood: SKY TWO GX (W)GTIN: 4710562747768Korpused
Elegant airflow case in white by Montech, supports motherboards up to E-ATX, radiators up to 360 mm, tempered glass side panel with hinges, three pre-installed 140 mm ARGB fans.
COUGAR | FV270 Black | PC Case | Mid tower / Tempered, Curved Glass Perimeter / Quick Detachable Air Filters / Up to 9 Fans (1x120mm RGB Preinstalled) / Black
Nanoxia DS-9ARGB-W. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 3.5", SSD-formfaktor: 2.5". Bredde: 215 mm, Dybde: 460 mm, Højde: 455 mm
Showcase case in white, with curved tempered glass, up to 11x 140mm fans, space for three 420mm radiators simultaneously, motherboards up to E-ATX and GPUs up to 480mm, includes two PWM fan hubs
Das AeroCool D301A Mini-Tower-Gehäuse kombiniert ein trendiges Mesh-Design mit Holzakzenten an der Front mit einer robusten SPCC-Konstruktion für Langlebigkeit. Es unterstützt ASUS- und MSI-m-ATX-Motherboards mit rückwärts gerichteten Anschlüssen, Flüssigkeitskühler bis zu 360 mm und GPUs bis zu 410 mm und bietet so ein leistungsstarkes PC-Baupotenzial in kompakter Form. Mit 11 Lüftersteckplätzen für optimale Kühlung, vielseitigen Speicheroptionen und praktischen E/A-Anschlüssen, einschließlich USB Typ C und USB3.0, ist dieses Gehäuse auf Leistung und Benutzerfreundlichkeit ausgelegt.
Darkflash DB330M Mesh computer case (black)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh BlackHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg
Professional gaming PC case NOCTIS GLASS RGB X1 NOCTIS GLASS RGB X1 a case that combines gaming style with stable performance NOCTIS GLASS RGB X1 is a case designed for gamers who value not only high functionality but also impressive, modern aesthetics.The front panel made entirely of tempered glass highlights the RGB (Red Green Blue) lighting of the fans and creates a minimalist, clean design. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are also highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In NOCTIS GLASS RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated zone next to the motherboard.This allows you to prepare a setup that best suits your graphics card, processor, and gaming style. NOCTIS GLASS RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm front: 120 / 240 / 280 / 360 mm next to the motherboard: 120 / 240 mm rear: 120 mm This flexible solution lets you tailor the cooling system to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that delivers the best performance without worrying about fitting issues. Optimized airflow layout up to 10 fans NOCTIS GLASS RGB X1 allows you to configure cooling that fits your style of gameplay: maximum airflow maximum silence perfectly balanced operation With up to 10 fan mounting spots, you have full control over your temperature management. Available positions: 3 × front 2 × top 1 × rear 2 × next to the motherboard 2 × in the PSU chamber This layout makes it easy to achieve the perfect balance between cooling efficiency and acoustic comfort. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard formats: ATX (Advanced Technology eXtended) full-size, most expandable mATX (Micro ATX) compact but still highly functional Mini-ITX smallest, ideal for compact gaming builds Flexible drive system configuration tailored to the user Adapt your storage configuration to your game library and workflow: more SSDs faster load times and system responsiveness more HDDs more space for projects, recordings, or streaming archives The choice is yours the case supports both setups. NOCTIS GLASS RGB allows installing: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5 A practical solution to expand storage for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend the lifespan of your hardware. The tempered-glass front panel is complemented by additional dust filters: top PSU chamber As a result, the inside of your PC stays clean, and components run longer and more reliably. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 2 × USB-A 2.0 HD Audio The ports are easily accessible, making it convenient to connect USB drives, accessories, or headphones without reaching behind the computer.
The HYTE X50 is a stylish midi-tower case designed for demanding PC enthusiasts who want to combine design and functionality. With its innovative internal structure and high-quality workmanship, it targets gamers, streamers, and builders with an eye for detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for exceptional cooling performance 360 mm radiator support on the top and bottom for powerful water cooling Panoramic glass side panel showcases your setup Magnetic cable management system for clean, effortless builds HYTE X50: Innovative cooling concept with clear separation The HYTE X50 utilizes an intelligent three-chamber design that physically separates the GPU, motherboard, and power supply. This allows for unobstructed airflow that efficiently expels heat from the case. With direct airflow to your graphics card, you can keep it cool even in graphically demanding games or during 3D rendering, ensuring it gets consistent air supply. Design meets functionality The case impresses with a curved glass side panel that elegantly showcases your system. The clean, symmetrical design is not only an eye-catcher but also thoughtfully constructed. Radiators up to 360 mm can be installed at the top and bottom, making room for even high-end water cooling systems. Modular interior and easy installation Building your system is made easy thanks to thoughtful features such as magnetically closable cable guides, tool-less front and side panels, and flexible mounting options. In addition, the USB-C port on the front offers lightning-fast access with speeds up to 20 Gbit/s—ideal for modern peripherals and rapid data transfers.
HYTE Y70 Milk. Formfaktor: Midi Tower, Type: PC, Produktfarve: Lyserød. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 320 mm, Dybde: 470 mm, Højde: 470 mm
Volcano Space XL Full Tower Case black Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more.
COUGAR CFV235 Vision is a black ATX Midi Tower case with glass construction and ARGB lighting. It supports graphics cards up to 43 cm long, CPU coolers up to 17.5 cm high, and power supplies up to 20 cm long. The case provides two internal 2.5" drive bays. It supports up to three top fans and includes one 120 mm rear fan. Its dimensions are 235 mm wide, 493 mm high, and 460 mm deep, with a net weight of 10 kg.
