Classic 19" Rack with a lot of space for different drivesYou can remove the HDD cages with a few steps for easy mounting of internal devices.5 mounting slots with full height and the possibility to mount an ATX PSU ensures a professional and cost efficient solution.The lockable doors in front of the slots prevent, unauthorized access.Integrated air filters ensure clean air and a flawless cooling.KujutegurPüstikTüüpServerMaterjalTeras5,25" lahtrite arv43,5" lahtrite arv5Emaplaadi toetatud kujuteguridATX,Micro-ATX,uATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv5Väliste 5,25" kettalahtrite arv4Püstikmontaaž3UMaterjali paksus1,2 mmSertifikaatRoHS, CEKaasas toiteplokkEiUSB 2.0 portide arv2AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid2x 80 mmMaksimaalne tagaventilaatorite arv2Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"LED-indikaatoridVõimsus, HDDLähtestusnuppJahLaius485 mmSügavus530 mmKõrgus133 mmKaal9,34 kgPakendi laius560 mmPakendi sügavus630 mmPakendi kõrgus225 mmPakendi kaal11,1 kg
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - Side panel with window YES- Filter under the YES power supply- Filter on the upper panel YES- Filter on the front panel YES- Steel thickness: 0.7 mm- Space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - PSU mounting location: bottom of the housing- Power supply tunnel: YES- CPU cooling height: 163 mm- Maximum length of the graphics card: 395 mm- Side panel with a window: YES, made of tempered glass- Filter under the power supply: YES- Filter on the upper panel: YES- Filter on the front panel: YES- Steel thickness: 0.7 mm- Increased space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
Form factor: mATX, Dimension (DxWxH): 425mm x 180mm x 352mm (Stand +3mm), Weight: 4, 5 kg w/o psu, Drive Bays ext.: 2x 5, 25" / 1x 3, 5", Drive Bays int.: 2x 3, 5" / 1x 2, 5", Power Supply: 350Watt (GPB-350S), Front I/O: 2x USB3.0 (USB3.1 Gen 1), 2x USB 2.0, Mic-in, Audio-out (AZALIA / HD-Audio), Scope of delivery: Set of screws, Material: SECC, 0, 5mm, Cooling (opt.): 1x 80mm or 90mm or 120mm on the front, 1x 80mm or 90mm or 120mm on the rear, CPU cooler height (max.): 140mm, VGA card lenght (max.): 340mm, CT-04B-OP
No. of drive bays: 9 MOLEX power connectors: 3 Floppy power connectors: 0 SATA power connectors: 5 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 1 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 1 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Dimensions: 368mm x 173mm x 365mm Weight: 4.1
Darkflash A290 computer case (white) Want to build yourself the perfect computer for work or gaming? The Darkflash A290 case will help you do it! It is compatible with many types of components and allows you to create a powerful cooling system. It also offers several key ports and buttons, including USB 3.0, USB 2.0 and a headphone/speaker output. It is also distinguished by a modern, stylish design - a tempered glass side panel will give you stunning visual effects. Plenty of expansion possibilities The A290 chassis is compatible with a range of components, so you can easily build exactly the computer of your dreams. The product supports such motherboard standards as ATX, M-ATX and ITX, and allows you to mount a graphics card with a maximum length of 260mm. You'll also have room for CPU cooling up to 160mm in height. Efficient cooling Don't worry about your computer overheating. The well-thought-out design of the A290 case allows for efficient heat dissipation, and there is also the possibility to install 5 120mm fans. You can also install 240mm water cooling. Now you can play even the most dynamic game or use demanding software without any problems! In addition, the kit includes 3 CL6 fans. Thoughtful design The side panel of the case is made of tempered glass. This favors the display of components equipped with backlighting, emphasizing the gaming character of your configuration. What's more, the A290 is distinguished by a modern finish, which further enhances the visual appeal of the hardware. The case is also equipped with a dust filter, which can be easily removed and cleaned. This makes it effortless to keep your equipment in excellent condition. More amenities You can place an HDD or SSD in the case. When you choose the A290, you'll also gain access to an interface with a USB3.0 port, which features outstanding speed. And when you want to expand your hardware configuration, 7 expansion card slots will help. A290 computer case 3x CL6 fan BrandDarkflashModelA290ColorWhiteMotherboard standardATX, M-ATX, ITXSide panelTempered glassDimensions320x190x433mmDisk mounting spacesHDD x1;SSD x1;Expansion card slots7Max graphics card length260mmMax CPU cooling height160mmPower source mounting locationBottomCooling mounting optionsFront: 120mm fan x2;Rear: 120mm fan x1;Top: 120mm fan x2;Front panel connectorsUSB 3.0 x 1, USB 2.0 x 2 Headphone/speaker output, Power, Reset
The CORSAIR iCUE LINK 2500X RGB mid-tower is a marvel of system cabinet design, blending functionality with aesthetic appeal. This chassis supports a wide range of motherboards, from Mini-ITX to microATX, and accommodates video cards up to 400 mm in length, ensuring compatibility with gaming setups. The case's cooling system offers various configurations for fans and radiators to keep your components at optimal temperatures. With a tempered-glass side panel, your system's RGB lighting and meticulous build are on full display, complemented by the ease of cable management thanks to its dual chamber layout. Whether for gaming, content creation, or everyday use, the CORSAIR iCUE LINK 2500X RGB offers a solid foundation for any PC.
CTE C750 TG ARGB Snow Full Tower case The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB Snow is a high-end presentation case that allows you to imagine something outside the box. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Snow Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance.
Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
This is proof that the unique appearance of a computer case can go hand in hand with excellent air circulation and capacity useful when creating your own hardware configuration. Krux Vako White RGB is a white version of the legendary Vako housing without even the slightest compromise. Arctic cold inside Excellent airflow in the white Vako is ensured by three efficient, factory-installed RGB fans. They help maintain a low temperature of components, and thus promote quieter operation. Two 140 mm front fans draw cool air into the case, while one with a diameter of 120 mm exhausts it from the back. Snow Queen What undeniably distinguishes Krux Vako White RGB from other housings is its crystal white color. Such a white tower will be a great culmination of an aesthetic streaming setup, or it will better fit into the bright decor of the room. No matter how you use it, it will always soothe your eye with its cool whiteness. Aurora in the fan White is not the only visual advantage of this housing. Pre-installed zone-illuminated RGB fans enhance the appearance of both the external panels and the components inside. Their power supply and backlight are connected with 3-pin plugs, which facilitates compatibility with the power supply. Look inside Like through a crystal ball, you can look through the tempered glass side panel into the Krux Vako White RGB case and admire the beauty of your setup. Moreover, this panel is mounted on magnetic latches. Disassembly and reassembly become very simple, so you don't have to worry about scratches and breaks. Space and accessibility Krux Vako White RGB has great capacity for its size. It can accommodate an ATX motherboard up to 240 mm AIO, and next to it there can be a graphics card up to 310 mm long. There are also four places for drives, and on the floor there is space for a power supply up to 160 mm. The external, upper panel of the housing gives access to three USB ports (including one in the 3.0 standard) and the most necessary audio ports. Krux Vako White RGB - main features: Aesthetic, white casing color Two 140 mm fans behind the front panel and one 120 mm fan with back of the housing Zone RGB lighting Roomy interior Design that ensures good air circulation
