Small case for simple systems Two fans installed Supports ITX size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on the desk due to its light weight and fits into any setup thanks to its simple silver design. Cooling The mini-tower already comes with two small fans installed, providing sufficient cooling. Additional fans cannot be installed. For this reason, the tower does not support the installation of graphics cards, as these require more cooling. Nevertheless, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX size motherboards. The CPU cooler should not exceed a height of 38 mm. To store programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, note that only a 1U Flex power supply is possible, which should not exceed 150 mm in length.
Small case for simple systems Two fans installed Supports ITX-size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on a desk thanks to its low weight and fits into any setup with its silver, minimalist design. Cooling The mini-tower already has two small fans installed, providing sufficient cooling. Additional fans are not possible. For this reason, the tower does not support the installation of graphics cards, as they require more cooling. However, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX-size motherboards. The CPU cooler should not exceed a height of 38 mm. For saving programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, make sure only a 1U Flex unit is possible, and it should not be larger than 150 mm.
Black midi tower, extravagant design with panoramic window, for motherboards up to ATX format, exceptionally good airflow, two different motherboard positions, 2x USB-A ports on the I/O panel
Zalman T4 PLUS White The Zalman T4 PLUS Black is a Micro-ATX case with a sophisticated design for efficient cooling and clever space utilization. With its sleek, matte black look, it fits perfectly into any setup—whether home office, gaming, or business PC. Highlights: Optimized air circulation: Pre-installed 120 mm fan at the rear and space for additional fans at the front, top and sides – for reliable cooling. Compact design: Supports Micro-ATX and Mini-ITX motherboards. Ideal for space-saving builds without compromise. Good expandability: space for graphics cards up to 300 mm long and CPU coolers up to 150 mm high. Front ports: 2x USB 2.0, 1x USB 3.0, HD audio – everything at your fingertips. Easy installation: Tool-free mounting for HDDs/SSDs, sophisticated cable management. Whether as an affordable entry-level model or for compact builds – the T4 PLUS offers reliable quality and functionality at a fair price from Aquatuning.
Zalman P30 micro-ATX Case with Tempered Glass and Panoramic View - Black/White The Zalman P30 micro-ATX case in the elegant black/white combination offers an ideal mix of style and functionality for modern PC builds. With a generous panoramic window made of tempered glass, it shows your components in all their glory and ensures a tidy look. The combination of black and white gives the case a timeless elegance that suits any setup. Main features of the Zalman P30 case in black/white: Panoramic Tempered Glass Side Panel : Provides a clear view of the hardware and showcases your setup in style. Compact micro-ATX size : Suitable for micro-ATX and mini-ITX motherboards, ideal for powerful and space-saving builds. Excellent cooling capabilities : Support for multiple fans and water cooling for efficient heat dissipation. Elegant black/white design : The high-contrast design fits perfectly into any environment and gives the case a modern aesthetic. The Zalman P30 case with Panoramic View is ideal for anyone looking for a high-quality and stylish micro-ATX case. The combination of tempered glass and the two-tone black/white finish makes it the perfect choice for demanding PC builds.
The Phanteks XT M3 impresses with a space-saving design that provides you with more than enough room for high-end components. Thanks to effective cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Room for up to nine fans Large Radiator: Installation of a 360 mm radiator at the top is possible Tidy Build: Space for clean cable management Back-Connect Support: Supports motherboards with a back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SF case built for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360 mm radiator can be fitted at the top if you prefer water cooling. Besides fans and a radiator, the mesh on the front also ensures very good airflow, so less hot air accumulates in your case. Your new gaming PC with clean cable management Laying cables neatly isn’t easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also allows for better air circulation. Mini-ITX case built for powerful hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that if you use the maximum length, you cannot install fans at the front. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
Darkflash DB330M Mesh computer case (black)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh BlackHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg
Darkflash TH285M computer case (white)The Darkflash TH285M chassis is a sleek, compact design for gamers and PC gamers looking for the perfect balance of aesthetics, functionality and performance. Three glass panels provide full visibility of the interior, while compatibility with M-ATX and ITX motherboards and support for up to six fans and a 360mm radiator make it a great base for high-performance and stylish PC sets. It's an option for those looking for a case that stands out in both looks and capabilities.Transparent design on three sidesThe case is distinguished by as many as three transparent panels made of tempered glass, which allow you to easily view every detail of your setup. The transparent design not only enhances the aesthetics of your components, but also allows you to easily check the status of your components and cooling efficiency. The thumb screw-mounted side panel facilitates quick access to the case's interior. From now on, your workspace will impress with its futuristic design.Compatibility and space for componentsThe Darkflash TH285M supports M-ATX and ITX format motherboards, offering great flexibility when building a kit. The interior is designed to accommodate larger-sized components - the maximum height of the CPU cooler is 160 mm, and the length of a graphics card can reach up to 415 mm. Thanks to five PCI slots, the installation of even extensive graphics cards runs smoothly.Advanced cooling capabilitiesThe TH285M is designed with optimal airflow in mind. It supports up to six 120 mm or two 140 mm fans, as well as 360 mm water cooling. This configuration keeps temperatures low even under intense system load, making this chassis ideal for gamers and developers who require stable operation of their components.Convenient access to portsOn the front panel, you'll find a clear and organized layout of ports, including one USB 3.0 and two USB 2.0 connectors for quick access to transfer data and charge peripherals. This makes connecting accessories and external memory fast and convenient.Ready for expansionThe well-thought-out, spacious interior layout makes it easy to install and later upgrade the kit. The case is equipped with the INF24T Black fan and is compatible with the D21 Black CPU cooling, providing a solid starting point for further system expansion. With easy cable management and plenty of space inside, assembling the computer is a breeze. It's the perfect choice for any gamer, graphic designer, or computer enthusiast. ManufacturerDarkflashModelTH285MHousing typeMidi TowerSide panelTempered glassMotherboard standardITX, M-ATXPower supply standardAt the bottomSlots for internal drives3.5'HDD x2, 2.5'SSD x3Expansion card slots5Max PSU length240 mmMax length of graphics card415 mmMax height of CPU cooler160 mmMax number of fans6Fan mounting optionsRear: 120 mm x1; Side: 120 mm x2/140 mm x2; Bottom: 120 mm x3Water cooling mounting optionsSide 280 mm, 280 mm; Bottom 240 mm, 360 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.7 mm SPCCColorWhiteHeight373 mmWidth285 mmDepth426 mm
MSI PRO SHIELD M100P. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 80 mm, Understøttede diametre for bagerste ventilatorer: 80,90 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 166 mm, Dybde: 312 mm, Højde: 354 mm. Pakkevægt: 3,58 kg
Strimer Plus V2 Highly customizable addressable RGB extension cables. Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalizing light effects
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height clearance, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who don’t want to compromise: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws air in precisely and reduces flow losses. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, whether you prefer air or water cooling.HAVN BF 360 side viewCooling power for your high-end hardwareThere is room for up to seven fans: 3x front, 3x top, and 1x rear. Alternatively, you can install radiators up to 420 mm at the front. With 195 mm CPU cooler height clearance and a spacious interior, you have plenty of room for large air coolers or custom loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at maximum performance.HAVN BF 360 rear side viewCompatibility without compromisesThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm of room for graphics cards – suitable for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can hold either 2x 2.5-inch or 1x 3.5-inch drives – naturally vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeSimpliCable provides pre-made cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull strap – maintenance and upgrades have never been so easy.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether for gaming or as a workstation.
The IT-8862 ATX case impresses with its modern design, generous features, maximum flexibility, and special extras. With its various connectivity options and high drive capacity, it is ideal for high-performance gaming systems, professional workstations, or storage-intensive applications. Equipped with USB-C 3.2 Gen2 for ultra-fast data transfers, along with an additional USB-C 3.2 Gen1, a USB-A 3.2 Gen1, and a classic USB-A 2.0, the IT-8862 offers full connectivity for both modern and proven peripherals.
The View 380 XL TG ARGB Mid-Tower Case is designed for next-generation motherboards and features a unique layout that supports both standard motherboards and motherboards with hidden connectors from ASUS, MSI, and GIGABYTE. The dual-chamber design offers more space, improved cable management, and increased airflow for greater flexibility. The View 380 XL TG ARGB Mid-Tower Case enhances visibility with tempered glass panels on the front and left side, allowing users to showcase their system. For optimal cooling, users can mount a 360 mm radiator at the top and on the motherboard side. The case comes equipped with three hydraulically mounted 120 mm ARGB-Lite reverse fans on the motherboard side and one hydraulically mounted 120 mm ARGB-Lite fan at the rear. The stunning lighting effects can be controlled through motherboard software from ASUS, GIGABYTE, MSI, and ASRock. The integrated GPU bracket prevents graphics card sag and provides extra support. The View 380 XL TG ARGB Mid-Tower Case offers excellent expansion options, supporting a CPU cooler with a maximum height of 160 mm, GPU installation of up to 420 mm in length, and power supplies up to 180 mm long. The case is optimized for superior cooling performance and comes with four hydraulically mounted 120 mm ARGB-Lite fans, with capacity for up to ten 120 mm fans in total. In terms of storage compatibility, it provides maximum support for up to three 2.5" SSDs or a 3.5" HDD. The lower I/O ports include two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and an HD audio port, making access convenient when the PC case is placed on a desk.
Darkflash M305 Mesh fanless computer case (Black)Darkflash M305 Mesh is a compact M-ATX case that combines futuristic design with practical solutions. It offers a mesh front for better airflow, a tempered glass panel for easy access and presentation of components, the ability to mount as many as 7 fans, support for high-performance graphics cards and CPU (Central Processing Unit, processor) cooling, and a functional I/O panel with a USB 3.0 port (Universal Serial Bus, an interface used for powering and charging devices, as well as for data transfer). Thanks to its well-thought-out design and ample interior space, this model will be perfect for both modern gaming setups and PCs for everyday use.Design and functionalityDarkflash M305 Mesh is an option for those who appreciate minimalist design, functionality and freedom in computer configuration. The front of the case has been made in an industrial style, with a full mesh panel, which first of all provides excellent airflow into the case, but also looks stylish. This solution is especially important for more demanding sets, where proper cooling directly affects the stability of hardware operation.Efficient ventilation and free coolingAlthough the M305 Mesh does not include pre-installed fans, its design has been prepared so that the user can independently select and install up to seven 120mm fans. Such flexibility gives you the opportunity to customize your cooling system - from a basic layout for an office PC to an elaborate gaming setup with advanced cooling. The mesh front not only improves air circulation, but also reduces heat buildup of components even under intense load.Tempered glass for more styleA screw-mounted tempered glass side panel allows you to quickly access the computer's interior without the need for tools. This is especially convenient for frequent kit modifications. At the same time, the transparent panel is great for backlit components, allowing you to expose the computer's interior and create an aesthetically pleasing whole.Compact size that does not limit the possibilitiesThe case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard format) motherboards. Despite its small size (325 × 195 × 387 mm), its interior has been designed for maximum functionality. Inside there will be room for a CPU cooler up to 160 mm high and a graphics card up to 300 mm long. This allows it to accommodate most popular components without worrying about compatibility. The chassis also has room for two SSDs (Solid State Drive, a solid state drive) and two traditional HDDs (Hard Disk Drive, a classic hard drive), giving you plenty of room for storage expansion.Functional I/O panel and modern connectorsThe top of the chassis features a well-placed I/O panel with easy access to the most important ports. The presence of a USB 3.0 connector guarantees fast data transfer and convenient connection of external devices such as flash drives, portable drives or other accessories. The clear layout of the top panel simply makes it more convenient to use the computer on a daily basis.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305 MeshHousing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom of caseSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsSide: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1; Top: 120 mm x2.Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorWhiteHeight387 mmWidth195 mmDepth325 mm
Das UNC-409S-AIO 4U Rackmount-Gehäuse wurde für höchste Zuverlässigkeit und Leistung in anspruchsvollen Industrieumgebungen entwickelt. Gefertigt aus 1,2 mm starkem SGCC-Stahl, bietet es optimalen Schutz der Hardware und stellt eine langlebige, flexible Lösung für verschiedenste Konfigurationen dar. Für eine verbesserte Kühlleistung unterstützt das Gehäuse den Einbau einer 360 mm All-in-One (AIO) Wasserkühlung und ermöglicht so eine effiziente CPU-Wärmeabfuhr. Es ist mit verschiedenen Mainboard-Formfaktoren kompatibel, darunter SSI-EEB, und erlaubt somit leistungsstarke Systemkonfigurationen. Zur Stromversorgung kann wahlweise ein Standard-ATX-Netzteil oder ein Mini-Redundant-Netzteil eingesetzt werden, um auch bei kritischen Anwendungen eine stabile und redundante Stromversorgung sicherzustellen.
The Thermaltake S380 ARGB is a modern and robust PC case specifically designed for gamers and PC enthusiasts. It stands out with its elegant design featuring a high-quality tempered glass panel, which provides a clear view of your hardware and, thanks to integrated ARGB lighting, creates impressive lighting effects. With its spacious interior, the S380 ARGB offers ample room for high-performance components, including large graphics cards and extensive cooling solutions. The advanced airflow design ensures optimal heat dissipation, keeping your system cool and stable even under heavy load. Additionally, the case boasts practical features such as a tool-free drive bay, flexible mounting options, and well-organized cable management, making assembly easy and keeping the interior neat and tidy.
The Viewport Mini in its elegant white version is a mini-tower case featuring front and side panels made of tempered glass, providing a panoramic view of the high-performance interior components. It supports Micro ATX and Mini-ITX motherboards and offers advanced cooling options with 7 fan slots and liquid cooling support for 240/280 mm and 120 mm radiators. The included ARGB fans draw air through mesh ventilation to optimize airflow. Ideal for gaming and high-performance applications, it accommodates GPUs up to 355 mm and CPU coolers up to 165 mm.
The Corsair FRAME 4000X RS PC case was specifically designed for first-class airflow and ensures efficient cooling of your components. Thanks to the well-thought-out mesh panels and optimized airflow design, your PC system stays cool and powerful even under heavy load. Black mid-tower with built-in RGB front Wide range of fan and radiator mounting options for effective cooling performance Motherboards up to E-ATX, including back-connect designs Space for graphics cards up to 405 mm and CPU coolers up to 170 mm high Includes 4x RS120 fans Corsair FRAME 4000X RS: RGB PC case with built-in fans The Corsair FRAME 4000X RS mid-tower offers the perfect balance between size and functionality. With plenty of room for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any workload, up to 13 120 mm fans can be installed in the Corsair FRAME 4000X RS at the same time. The top, front, and side support three 120 mm fans and two 140 mm fans. The top even supports two 200 mm fans. Two additional 120 mm fans can be installed above the power supply shroud, while one more 120 mm or 140 mm fan can be mounted at the rear. An AiO liquid cooler can also be installed without any problems if you prefer to cool your powerful hardware with liquid cooling. Large radiators up to 360 mm can be installed at the top, front, and side, while only 120 mm or 140 mm radiators can be installed at the rear. Four pre-installed fans make it easy to get started: three RS120 fans are mounted at the front, and one more at the rear. Installing your hardware The case offers enough space for powerful gaming hardware. It supports graphics cards up to 405 mm. Motherboards up to the E-ATX form factor are supported, including motherboards with rear-facing connectors. The CPU cooler should not exceed a height of 170 mm. A total of three drives can be installed to store programs and games.
CFV235 Mesh Vision Float in Form. Flow in Function. Visualize in Motion. The CFV235 Mesh Vision is a new kind of PC case featuring the innovative Central Floating Ventilation (CFV) structure. This divides the PSU cabin and main chamber, retooling the open space in between as a cooling advantage by accessing extra ventilation, preserving a compact footprint without compromising architecturally-enhanced cooling. An integrated 9.16-inch IPS TFT LCD panel provides real-time, software-controlled system monitoring in ultra-crisp 1920x 462 resolution at a 60Hz refresh rate, displaying critical data and customizable visuals. Paired with a 3-in-1 front panel module—combining mesh, dual 160mm ARGB PWM fans, and a dust filter into a single pre-assembled unit— and immersive display technology, the CFV235 Mesh Vision empowers airflow beyond ordinary dimensions, visualized. Central Floating Ventilation free-floating separation provides a unique visual identity. True floating void adds an extra dimension of airflow across 270° of access. A 3-in-1 front panel module pre-assembles a dust filter, dual pre-installed 160mm ARGB PWM fans, and mesh panel into a single unit for even easier maintenance. The module uses a pogo pin to connect with the case’s built-in counterpart, minimizing cabling for easy setup and a cleaner view. 9.16-inch IPS TFT LCD delivers real-time readouts and customizable visuals in 1920 x 462 resolution with 60Hz refresh rate, fully accessible from your desktop through control software. The Aurora RGB lighting strip brings the awe and glory of RGB lighting to the free-floating space. Accommodates a maximum GPU length of 400mm. Compatible with Reverse Connector / Mini ITX / Micro ATX / ATX / CEB motherboards. USB 3.2 Gen 2×2 Type-C (20 Gbps) x 1, USB 3.0 Type-A x 2, 4 pole headset audio jack for versatile device connectivity. Houses 2 x 3.5” HDD drives and 2+2 2.5” SSD drives (converted from 3.5” drive bays) Cooling Capacity The CFV235 Mesh Vision has a fan capacity of 3x120mm or 2x140mm on the top, 3x120mm on the floor of the main chamber, 2x160mm fans on the front, and 1x120mm on the rear (2x160mm and rear 120 mm ARGB PWM fans are pre-installed). Water cooling support maxes out at 360mm on the top.
ARGB - Middle Tower | czarna | window | no power supply | 2 x USB 2.0, 2 x USB 3.0, 2 x Jack | 447mm x 220mm x 510mm | 4 x wen 120mm | ARGB backlight (NPC-1518)
