A longer version of our 100 Gigabit QSFP28 direct attach cable. This cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices apart or on top of each other.
This table microphone by Delock is suitable for use in conferences. Optimal recordings The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded. Touch mute button & status LED The touch mute button quickly mutes the microphone. The LED is red when muted and green when recording. Headphone output The microphone has a 3.5 mm stereo jack output for connecting headphones or speakers. Plug & Play Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux. Specification • Connectors: 1 x USB 2.0 Type-A male 1 x 3.5 mm 3 pin stereo jack female • Directivity: omnidirectional • Sensitivity: -16 dB +/- 3 dB • Frequency range: 100 Hz - 10 kHz • Sample rate: 16 Bit / 44.1 kHz • Signal-to-noise ratio (SNR): ca. 65 dB • Mute-Button • Status LED • Cable length: ca. 1.5 m • Colour: black • Dimensions (Ø x H): ca. 75 x 19 mm • USB bus powered • Plug & Play System requirements • Chrome OS • Linux Kernel 4.4 or above • Mac OS 10.9 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • USB microphone • User manual
AX3000 Wall Plate WiFi 6 Access Point Blazing-Fast AX3000 WiFi 6 Speeds:: Simultaneous 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz totals 2976 Mbps WiFi speeds.† Higher Network Efficiency: Deliver data to more devices at the same time with less lag.‡ Complete In-Room WiFi Coverage: Guaranteed strong signals and corner-to-corner WiFi coverage. Gigabit Port: Connect wired devices with one downlink gigabit port. Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management. Secure Guest Network: Implement multiple authentication options (SMS/Facebook Wi-Fi/ Voucher) packed with high-quality wireless security technologies.§ Easy Installation and PoE Support: Easy-to-install design, compatible with 86 mm & EU standard junction box, and 802.3af/at PoE support. AX3000 Wall Plate WiFi 6 Access Point Blazing-Fast AX3000 WiFi 6 Speeds:: Simultaneous 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz totals 2976 Mbps WiFi speeds.† Higher Network Efficiency: Deliver data to more devices at the same time with less lag.‡ Complete In-Room WiFi Coverage: Guaranteed strong signals and corner-to-corner WiFi coverage. Gigabit Port: Connect wired devices with one downlink gigabit port. Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management. Secure Guest Network: Implement multiple authentication options (SMS/Facebook Wi-Fi/ Voucher) packed with high-quality wireless security technologies.§ Easy Installation and PoE Support: Easy-to-install design, compatible with 86 mm & EU standard junction box, and 802.3af/at PoE support.
The Ubiquiti repeater and transceiver is designed to meet the demands of modern networking. This device offers a data transfer rate of 10 Gbps and supports 10 Gigabit Ethernet, making it suitable for environments requiring high-speed data transmission. With LC multi-mode connectors, it ensures a secure and efficient connection, while its ability to extend up to 300 m makes it versatile for various networking setups. Its plug-in module form factor allows for straightforward installation, integrating seamlessly into existing network infrastructures. Whether for business or advanced home networks, this Ubiquiti product is engineered to provide reliable, high-performance connectivity.
Wi-Fi Access Point 6 AX1800 PoE DAP-X2810 Wi-Fi 6 AX1800, up to 1.8Gbps Dual-band, 2x2 MIMO, airtime fairness and bandwidth control functions Free software and Nuclias Connect app Convenient installation with PoE Configurable captive portal D-Link Lifetime Limited warranty Scalable and easy to manage corporate WiFi network 6. The DAP-X2810 with Wi-Fi 6 networking provides businesses of all sizes with fast connections, significantly increased capacity and interference-free coverage, all combined with centralised management via Nuclias Connect. Easy management of your corporate network The DAP-X2810 works with Nuclias Connect, a software-based management platform (with optional hardware controller). This enables you to manage and control your business network from anywhere via the Internet, providing easy access, automation and network scalability. Easy network management with Nuclias Connect Easily automate, monitor, manage and scale your network according to your business needs at no additional cost through the centrally managed Nuclias Connect platform. Next generation - Wi-Fi 6 Greater network performance and lower latency, with almost four times the capacity of previous Wi-Fi standards Secure performance WPA3 encryption provides security with high throughput with dual-band 2x2 MU-MIMO technology, bandwidth control and airtime fairness to intelligently manage users. Flexible deployment with PoE Support for Power over Ethernet (802.3at) simplifies installation with less cable clutter. The design allows easy installation on Ethernet wall sockets. No licence required Work as a standalone access point or as part of a centralised, scalable multi-device deployment according to the needs of the business. More efficient administrative tasks Administrators can work more efficiently and effectively with role-based options for delegated access across the network. Deployment, configuration, upgrading and expansion is possible from multiple locations using an intuitive dashboard. Captive portal Captive Portal, the industry standard for authentication, streamlines access management with the ability to add brand information. Free software and application Quickly configure, manage and monitor access points locally via a free management tool or remotely via the Nucliast Connect app. Next-generation WiFi 6 performance with huge speed improvements Combined Wi-Fi 6 802.11ax connection speeds of up to 1,800 Mbps provide the DAP-X2810 with lightning-fast transfer rates, enabling large amounts of data and efficient video streaming, even in high-density environments Next-generation Wi-Fi 6 connections deliver higher network performance and lower latency, and nearly four times the capacity of previous Wi-Fi standards. Optimised Wi-Fi for convenient connections The DAP-X2810 supports 2x2 MU-MIMO bandwidth control and beamforming functions, which are designed to reduce network congestion. In addition, load-balancing technology and Airtime Fairness manage access point loads to optimise resource utilisation. This ensures that each device connected to the network connects at peak performance without overloading the entire network. Multiple modes of operation The DAP-X2810 can be configured to suit your network needs and optimise network performance. Access point Wireless distribution system (WDS) with access point WDS/bridge (without AP broadcast) Wireless client Easy and hassle-free installation anywhere. The DAP-X2810 can be placed on a desk, ceiling or wall mounted. The PoE function makes installation quicker and easier as there is no need to lay additional power cables. This is ideal for extensive deployments in locations where power sockets are not readily available. Corporate network management with advanced control mechanisms Nuclias Connect enables you to manage and control your network from anywhere. It provides insight into network performance and user activity through traffic analysis and status reports, available in a browser or free app. Detailed data from network traffic analysis, which can be displayed for the entire network down to the single access point level, can be used to create business value. Comprehensive on-site network management Nuclias Connect, compared to traditional hardware-based unified management systems, offers a great deal of flexibility. Easy configuration, remote access and an intuitive dashboard provide administrators with management efficiency and convenience, while functionality and automated network tools such as airtime fairness, throttling location and load balancing improve the user experience. Scale up your WiFi network as your business grows Nuclias Connect enables unlimited scalability, allowing you to adapt the size of your network to suit your business requirements. Expanding or setting up a network in a new location is quick and easy. Management and configuration is done via the cloud, and access points and surveillance cameras are automatically detected and ready for deployment right out of the box. Greater brand awareness with captive portal Guest web visitors are not only able to connect using an email address, Facebook or Google account. Captive portal enables increased brand awareness, the placement of advertisements and promotions, and the collection of user information to gain a better understanding of customer behaviour.
The ASUS ZenWiFi BT10 offers a blend of performance, security, and convenience. This Wi-Fi system supports a wide range of wireless protocols, ensuring broad compatibility with devices and high-speed Internet access. With VPN support, users gain an extra layer of security, making it suitable for both work and leisure activities that require privacy and data protection. Its dual connectivity options cater to all scenarios, providing reliable wired connections and the freedom of wireless access. Designed to fit any space, its desktop form factor allows for easy integration into your home or office environment. Experience seamless Internet with the ASUS ZenWiFi BT10.
The Zyxel XMG-105 switch is designed to meet diverse networking needs with an unmanaged setup that streamlines connections. With a packet buffer size of 1 MB, it ensures efficient data handling. The compact design allows for desktop or wall-mountable placement, making it a versatile choice for any environment.Operating within a temperature range from -20°C to 40°C, the Zyxel XMG-105 performs reliably in various conditions. Its fanless technology minimizes noise, making it suitable for office settings. Moreover, the switch operates effectively in high humidity ranging from 10% to 95%, ensuring connectivity in challenging environments. Features such as auto-uplink providing seamless connectivity and loop detection enhancing network reliability contribute to creating a stable networking experience.
EC25-EU&KNe | LAN \ WAN ports 1 | PoE ports 1 | Memory (RAM) 256MB | Flash memory capacity 512MB | Included Accessories K-91 Fastening set5 V 0.8 A power adapter | Operating temperature range -40°C to 70°C
Highly intuitive, the Smart Managed Switch can manage local networks. With the DoLynk Care platform, it can also perform cloud management. The switch performs operation and maintenance using topology visualization on front-end, transmission and back-end storage devices that are in the security system and IT system. With its full metal design, the switch has great heat dissipation and can operate in temperatures ranging -10°C to 55°C. It offers EMC and has protection against overvoltage, overcurrent, static electricity, lightning strikes, pulses and other types of interference. For the PoE series Smart Managed Switch, power is supplied up to 250 meters away. The orange port supplies up to 60 W and the red port provides up to 90 W. Also, link aggregation and STP are available on select models to ensure the network remains stable. The switch can be used in small and medium-sized businesses such as supermarkets, offices, restaurants, cafés and hotels. Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof
wAP ax LTE7 kit The new wAP LTE7 kit is an evolution of the popular wAP ac LTE6. Now – with Wi-Fi 6, CAT7 LTE, a stronger ARM platform, and improved antenna gain. The unit comes in our improved next-gen IP66 weatherproof enclosure. wAP ax LTE7 kit brings fast and reliable Wi-Fi 6 to your countryside getaway or any other challenging environment – like a rural gas station or a bus stop. The updated enclosure enhances durability even further and features a concealed anti-vandal screw behind the MikroTik logo for added security.Now upgraded with a CAT7 LTE modem, doubled upload speeds, and a more powerful ARM platform, this generation raises the performance bar without changing what people love about wAP or raising the price. A mighty dual-band, dual-chain (2x2 MIMO) radio ensures strong wireless coverage across your home, yard, or business premises – enhanced by higher antenna gain and a redesigned LTE antenna system for improved signal quality, greater range, and better stability in challenging environments. Enhanced Hardware for Uninterrupted Connectivity and Simple Management This compact access point is equipped with a modern dual-core ARM CPU and runs on RouterOS v7, ensuring stable internet and excellent VPN performance across your property. The wAP ax LTE7 kit also supports our new CAPsMAN for easy centralized management of multiple devices with just a few clicks. The device features two Gigabit Ethernet ports, with PoE-in on one for flexible powering options. You can also use the standard DC jack – because we believe in giving you options. Stealthy Design – Weatherproof and Vandalproof wAP ax LTE7 kit is designed to blend into any environment. Its simple, elegant design doesn’t attract any unwanted attention, making it perfect for busy public spaces or private properties alike. wAP can be securely fixed to any external wall or roof from the inside of the case. A designated indentation at the back of the enclosure marks the drill point for a cable pass-through, enabling discreet and secure wall-mounted installations.
Extender switch PoE DIN-FE4-AT-30W LanbergPoE extender (often referred to as a PoE repeater or "amplifier") is a practical component in installations where we need to run devices far from the telecommunications cabinet, and the classic 100 m limitation on Ethernet and PoE power becomes a barrier. Such a PoE switch acts as an active splitter: it regenerates the signal and transmits PoE power further, allowing you to safely "extend" power and transmission to subsequent points in the LAN without an additional power supply in the field and without having to deal with intermediate power sockets.Key features of DIN-FE4-AT-30W that really help installers and LAN administrators 4-port RJ45 layout: 1x input port + 3 PoE output ports (ideal when you need to add a "branch" to the installation). PWR and Link/Act LED indicators on ports quick diagnostics and field service. Extension of LAN and PoE power by another 100 m on a single UTP twisted pair (i.e., still "one cable"). DIN mounting on a TS-35 rail with a metal clip convenient, secure, and "rack-mounted." Extend the range of PoE power and network signal in your LAN by 100 mThis is the most common scenario: surveillance cameras, access controllers, alarm components, Wi-Fi/access points, and other PoE-powered network devices are "too far" from the main network switch in the rack. Instead of installing a 230 V power supply along the way, you insert a PoE extender into the path.The DIN-FE4-AT-30W works in a simple, practical way: it receives data and PoE power at the PoE input, and then provides a fresh Ethernet signal and PoE at the outputs - meaning you can effectively extend the range of your installation by another 100 m. This is a great solution when you need to run several PoE receivers, e.g., several cameras in a hall, parking lot, or long corridor, and the power supply and transmission are to go through a single UTP cable.4-port PoE extender switch with cascading capabilityIn practice, you gain the most when the extender works not only as a single module, but also in a serial arrangement. Both models can operate as an extender in a single configuration and in a cascaded connection.How does this work in the field? You connect the first extender (PoE IN) to the PoE switch, and then you can add another and another - up to 3 devices in series (i.e., a 3-level/three-level cascade). Each extender "adds" another 100 m, so you gain a maximum of +300 m in relation to the nominal range. At each stage, apart from the next extender, there is room for an additional network branch: you can connect 2 cameras or other peripherals (e.g., an IP sensor, a small AP) - that is, exactly when you have points "along the way" that you want to power with PoE. This is convenient when you are expanding your LAN in stages and want your infrastructure to be flexible and easy to maintain.Advanced PoE extender ready for any taskThe DIN-FE4-AT-30W is a compact Layer 2 switch that makes life easier in PoE installations thanks to proven transmission mechanisms: Automatic MDI/MDI-X - the ports select the pairing method themselves, so you don't have to worry about the type of cable (patch cord/crossover). Flow control (IEEE 802.3x) - flow control reduces losses and overloads during peak traffic. MAC auto-learning + 2K MAC table - automatic address learning speeds up operation and stabilizes switching in small LAN segments. The DIN-FE4-AT-30W version supports IEEE 802.3i (10Base-T) and IEEE 802.3u (100Base-TX) wired standards and PoE+ compliant with 802.3af and 802.3at. This is an important distinction, because in installations you will also encounter passive PoE solutions here we are talking about standard, negotiated PoE. At the same time, the device has passive cooling (no fan) and very low power consumption approx. 1.6 W, so it is suitable for continuous operation.Robust, durable housing and convenient mounting on a TS-35 DIN rail with a metal clipIn industrial and technical installations, it is not only the PoE function that counts, but also the installation. That is why the housing and metal clip for the TS-35 DIN rail are more than just a detail: they save time and keep the switchboard tidy.Advantages of DIN rail mounting for the installer/administrator: Quick and easy installation (snap-on) Space saving Easy modification and maintenance Versatility and standardization Neat cabling Durability and safety Cost reduction If your LAN infrastructure has areas where the network needs to be extended beyond the standard 100 m, and you also have PoE-powered devices (e.g., IP cameras and other devices, access points, etc.), the DIN-FE4-AT-30W is designed as an extender for such tasks. Choose the model according to your power requirements: PoE+ for typical peripherals or PoE++ where you need a larger PoE budget and gigabit transmission.
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation• Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUI
The CS22D 2-Port USB DVI KVM Switch is a control unit that allows access to two computers from a single USB and DVI console (keyboard, video and mouse). With the CS22D, you can access the computers conveniently via a Remote Port Selector.- One DVI-D video console controls two DVI-D USB interface computers.- Computer Selection via Remote Port Selector.- OS Support: Windows 2000, Windows XP, Windows Vista, 7, Mac, Sun and Linux.- Superior video quality- up to 1920 x 1200@60Hz.- Supports USB hot-plugging.- Non-powered.- Supports USB 2.0 device.DesignNumber of Hosts 2Supported Maximum Resolution 1920 x 1200 Resolution (pixels)Device Switchoveron the DeviceLEDPort 2Terminal-Device ConnectionsUSB 2DVI-I 1Connections per ComputerUSB 1DVI-D 1Product dimensions 100 x 30 x 94 mmWeight 330 grams
5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
