The wAP R is a small weatherproof 2.4Ghz wireless access point with a miniPCI-e slot (so you can use your own LTE card) and LTE antennas. Unit comes with one 10/100 Ethernet LAN port for your wired devices. The weatherproof device can be mounted outside your house, in the vehicle, on your porch or anywhere else where you need wireless access from your phone or computer. It also includes a desktop stand so you can put it inside the building near a window. Unit has the several powering options - 9-30V PoE-in by Ethernet port, DC jack and automotive connector, very handy in mobile devices like car, bus or train. RBwAPR-2nD - wAP R - Included Parts Ethernet test resultsRBwAPR-2nDQCA9531 100M one port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)8.198.423.596.3173.688.9Bridging25 bridge filter rules8.198.423.596.370.936.3Routingnone (fast path)8.198.423.596.3160.882.3Routing25 simple queues8.198.423.596.390.846.5Routing25 ip filter rules8.198.423.596.343.222.1
Improved Noise Immunity The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Innovative Mechanical Design • Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. • Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole. • Easy removal The antenna feed can be detached with the push of a button. Corrosion Resistance • Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
The wAP 60G and wAP 60G AP are weatherproof integrated 60GHz wireless units, that can be used indoors or outdoors in different scenarios - Base Station (only wAP 60G AP), Point-to-Point and CPE (wAP 60G AP and wAP 60G). The box includes a wall mounting kit, straps for pole mounting, power supply, PoE injector and also table stand for using the device indoors. Penetrates some windows depending on material. wAP 60G AP and wAP 60G allows to create high-speed Point-to-Multipoint setup setup in 60 GHz frequency that is not affected by the crowded WiFi spectrum. In such scenario, wAP 60G AP (comes with RouterOS L4 license for AP connections and 60 degrees antenna) can be used as Base Station / Access Point. wAP 60G AP supports up to eight simultaneous clients (wAP 60G with L3 license) on distances of 100m+. RBwAPG-60ad-A - Included Parts
mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
The LHG mount is a basic pole mount adapter for LHG series products.• Simple and low cost.• Supports all LHG series, products, including LHG XL.• Made from metal.• Package also includes a U-bolt and a K-58 mounting kit.
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: Product spetsifikatsioon:, Category värv: must
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 0.25 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: must
Lanberg’s crimping tool for pass-through RJ45 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring. This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45 and RJ-45 pass through. On top of that, this convenient tool has a built-in additional insulation stripper intended. Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented. All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.
Netgear 10 Gigabit SR SFP+ Module. Andmete edastamise maksimaalne määr: 10000 Mbit/s, Kaabeldustehnoloogia: 10Gbase-SR. Ühenduvustehnoloogia: Juhtmega ühendatud. Maksimaalne ülekandekaugus: 300 m. Liides: LC
The newest addition to the MikroTik IoT product family – KNOT – is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost low bandwidth cellular connection it is supported by countless mobile operators around the globe.KNOT can monitor onboard GPIOs convert Modbus protocol to TCP and even forward Bluetooth packets to TCP/IP network via HTTPS and MQTT. You can use the KNOT as a TCP bridge from wired Modbus sensors to send readings to a Modbus server. Yes the KNOT brings wireless connectivity to wired sensors such as electricity meters and relays. It could be used as a backup connection for the Ethernet or as a management channel for your network. NB/CAT-M monthly plan is much cheaper than LTE. Why spend extra money on bandwidth you don’t need? For example you can manage a KNOT-powered vending machine with temperature and liquid sensors with only a few megabytes per day!KNOT features so many protocol support and connectivity options: 2.4 GHz wireless Bluetooth 2x 100 Mbps Ethernet ports with PoE-in and PoE-out Micro-USB. Maximum convenience at the lowest cost! With the Bluetooth interface you can use the KNOT for asset tracking and telemetry based on Bluetooth advertisement packets. KNOT supports any BLE tag that sends advertisement data. iBeacon Eddystone or any other format. It has powerful filters for forwarding only relevant packets and ignoring others.KNOT is a great tool for most outdoor cabinet IoT applications as well. It comes with a DIN rail mount that allows easy integration with all kinds of setups: from agriculture and asset tracking to cold chain monitoring industrial manufacturing and so on.
A longer version of our 100 Gigabit QSFP28 direct attach cable. This cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices apart or on top of each other.
"26-Port Cloud Managed Desktop Switch with 24-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof."
Our 100 Gigabit family keeps expanding – you’ve already seen the incredible CCR2216 100 Gigabit router. Now it’s time for a matching switch – the CRS504-4XQ-IN. The small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups. This speed is no longer limited to data centers, ISPs, and large offices. You too can upgrade your 10 or 25 Gigabit network and join the one hundred club! There are four 100 Gigabit QSFP28 ports. Use them to connect other 100 Gigabit devices or grab a breakout cable to connect multiple 25 Gigabit devices: each port is connected to four 25 Gigabit lines, allowing you to connect 16 x 25 Gigabit devices. In fact, you can mix and match all kinds of connections this way: 100 Gigabits on one port, 40 Gigabits on the other, 4x25 Gigabits on the third, and maybe even some 10G or 1G cables on the fourth. Obviously, there is an Ethernet port for management purposes as well. We’ve been using this switch for quite some time now in the Genomics Data Network project. A high-capacity data network for our local scientists working on ground-breaking cancer treatments. Genome data can take up a lot of space, so you need exceptionally fast connections there. Also, with these devices, Latvia became the first Baltic country to establish a 100 Gigabit connection to the pan-European research network. With multiple powering options and the ability to be mounted on the wall, this switch will make any system administrator happy.
