TRENDnet’s Corner Mount Bracket, model TV-HN400, installs a TRENDnet SpeedDome series network camera 30 cm (12 in.) off of an outside corner surface. This rugged powder-coated aluminum mount features a suspension point from which to hang the camera during installation and mounting hardware.- InstallationInstalls on outdoor ceiling or horizontal surface- CompatibilityCompatible with TRENDnet SpeedDome series network cameras- ConstructionRugged powder-coated aluminum construction- Seal RingSeal ring maintains waterproof seal against flat surface- Suspension PointOffers a suspension point from which to hang the camera during installation- Mounting HardwareMounting hardware includedToote värvValgeÜhilduvad tootedTV-IP450P, TV-IP450PI, TV-IP430P, TV-IP430PIKaal2,2 kgLaius419,5 mmSügavus194 mmKõrgus176,8 mm
Cambium Networks has deployed more than five million radios around the world achieving unparalleled degrees of scalability. Continuing the tradition of designing and manufacturing industry leading antenna solutions, the 4×4 ePMP 3000 Sector Antenna encompasses all the key diff erentiations of the Cambium Antenna line and adds 4X4 Multi User MIMO Capability. Designed to work in 5 GHz spectrum and 90 degree coverage, the antenna is an integral part of the ePMP 3000 Access Point and allows for Multi User MIMO Operation.• Frequency Re-use: Designed for ABAB channel re-use (two channels covering four sectors), the sector antenna has a minimum 30 dB front to back ratio over a wide rear facing aperture.• Channel Flexibility: Consistent gain from 4.9 to 6.0 GHz allows the operator to select a channel anywhere in the band and achieve the expected performance.• Consistent Coverage: Excellent null fi ll capabilities of the antenna allow for broad geographical coverage within a sector even near the base of the tower and the edges of the sector.• Designed for the Installer: Small, compact design, integrated ePMP radio mount and GPS antenna integration.• Predictable Performance: The sector antenna is integrated into Cambium Networks LINKPlanner. The 3D model shows coverage at all elevations and across the azimuth.
Cat.6A U/FTP flat network cable with support for bandwidth up to 500MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat 6A cable, for operating frequencies up to 500MHz, shielded with foil shielded with single pair shielding (U/FTP). Designed as flat ribbon cable for use in environments with restricted or limited installation space. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The very fleixible and thin ribbon cable construction allows the cables to be installed in restricted or limited spaces.Available lengths: 0.3m, 1m, 2m, 3m, 5m, 10m.Available colours: Black, White.
Wi-Fi has to be fast, reliable, easy to manage, it must reach every room and every corner. That is exactly what Audience devices can deliver in grand style – even in the biggest houses! Audience LTE6 kit is a tri-band (one 2.4 GHz & two 5 GHz ) home access point with LTE support and meshing technology. If you need Wi-Fi in a huge building with all kinds of obstacles, simply add more Audience devices to your network – with a press of a button they will sync seamlessly and create a single Wi-Fi network to cover the whole premises. The initial setup is also very simple – download the iOS or Android MikroTik app, it will connect to the router and guide you through a quick setup process. In some cases a single Audience unit might be able to replace several other routers – in our tests it covered 1858 m² (20000 square feet) easily. It depends on the amount of obstacles, Wi-Fi clients and interference, so results may vary. Cables can no longer limit you. CAT6 LTE delivers speed up to 300 Mbps with low latency, so having a traditional Ethernet connection is not a must-have for streaming high quality videos or gaming. Alternatively, you can use the two Gigabit Ethernet ports and keep the LTE option for backup. One of the Ethernet ports supports PoE for powering the device. Dual-chain 2.4 GHz and 5 GHz wireless coverage will solve most interference issues in a crowded environment. For example, you can simultaneously use the 2.4 GHz channel for all your household mobile devices and reserve the 5 GHz channel for your PC or TV. Order your Audience today and start living in the future. The future of easy and elegant networking.Wireless specifications 2.4 GHz Transmit (dBm) Receive Sensitivity 1MBit/s 26 -100 11MBit/s 26 -94 6MBit/s 29 -96 54MBit/s 26 -80 MCS0 29 -96 MCS7 25 -75 5 GHz Transmit (dBm) Receive Sensitivity 6MBit/s 28 -95 54MBit/s 24 -78 MCS0 28 -95 MCS7 23 -75 MCS9 21 -70 5 GHz Transmit (dBm) Receive Sensitivity 6MBit/s 32 -96 54MBit/s 28 -80 MCS0 32 -96 MCS7 27 -77 MCS9 25 -72
he A.I.M. management server (AIM-24) is a control suite which transforms ADDERLink INFINITY extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co-operative sharing of computers and the multicasting of video to any destination. Includes 24 End Point licenses (expandable up to infinite primary & failover end points) Intuitive, multi-lingual user interface Multiple switching methods Configurable user access rights Full audit trail Easy centralized management of Adder INFINITY Transmitters & Receivers Open API for 3rd party control Sun, PC and Mac compatible RJ45 Interface Hourly to Weekly automatic database backups Centralized Firmware Updates - Push updates to hundreds of devices, system-wide in minutes Adder INFINITY Manager Features - System administration Infinite Flexibility With the ADDERLink INFINITY management system (A.I.M.), you can turn multiple INFINITY point-to-point extenders into a truly scalable digital KVM matrix system that allows any workstation to link with any computer connected to the network. Point-to-point extension (local / over-IP) AV / KVM Switch multi-point matrix (over-IP) Sharing a single target (over-IP) Multicasting to many receivers (over-IP) Command Center / Video Wall Controller (over-IP) Learn more Easy centralized management of Unlimited end-points Accessed via a web browser, the INFINITY dashboard gives a real time overview of system connections and users. Tabs enable you to navigate between settings and device or user sub-menus. Secure access and communications Using TLS (transport layer security) and HTTPS ensures communications between Adder INFINITY units and A.I.M. and between A.I.M. and the outside world are all secure. Built-in security measures are compliant with universal enterprise grade security standards including SNMPv3, AES/DES encryption, and MD5/SHA authentication User access management and audit trails Each user can be granted different access permissions on a per computer basis. Administrators can also select which levels of control will be available, allowing users to choose between View only, Shared, Exclusive or Private connection modes. Reports showing the history of devices, user logins and device connections can be viewed and exported to a CSV file or via SYSLOG. Control End-points and set presets A.I.M. is used to facilitate connections between INFINITY transmitter and receiver devices through a easy centralized management system. Using Presets, a list of pre-defined connections, multiscreen, video wall or signage setups can be brought up with a single click. Redundant network operation To ensure 24/7 uptime, a second A.I.M. can be added for redundant network. The units will automatically change to the second network port if they detect a failure. Most INFINITY Transmitters and Receivers also feature dual NIC network interfaces, allowing your full solution to be easily designed for maximum resilience. Easy matrix setup The A.I.M. automatically obtains the MAC addresses of extender transmitters & receivers as they are attached to the network using Zero Configuration networking. The administrator allocates IP addresses, names and locations so that devices are easy to identify, configure and control. Open API for 3rd party control systems Adder Technology publishes a simple API structure that allows easy integration with other 3rd-party control systems supplied by companies like AMX, Crestron, HRS or MediaLon at a HTTP level. Adder INFINITY Manager Features - Intuitive user interface On-screen-display (OSD) at each user station After logging in, users choose channel connections from an intuitive OSD similar to that of a Digital TV. Users can also use Presets to change channels for multiple screens across multiple receivers. Remote OSD The remote OSD allows the user to "push" video and control to another station or to a video wall or projector. Favorites & Fast hotkey switching Video and USB switching time between computer sources is less than 1 second to provide a quality user experience. Each user can also select their favorite channels within the OSD and allocate a hotkey for faster switching between channels. USB device sharing USB sharing allows multiple users to connect to and control a single computer at the same time. Each transmitter can report 12 unique USB devices (identified by VID/PID codes) but will merge devices with the same ID to allow many more. Virtual KVM Transmitter Channels A Virtual Transmitter Channel can be setup via the management software to combine video, audio and USB from different transmitters as a single source. Ideal application where audio alerts or mixed video sources are required. LDAP integration LDAP allows integration and user authentication with a directory server such MS Active Directory, OpenLDAP or OpenDJ. To help ease setup, the systems LDAP interface can easily import users and passwords from other systems. SNMP v3 get / walk External machines can check status of the AdderLink Infinity network and units through the A.I.M. SNMP v3 security is implemented, supporting AES/DES transport with MD5/SHA authentication. External NTP server support - NTPv4.2 Connect up to 3 NTP servers with authenticated connections using MD5 and Key ID as defined in the NTP standards. All AdderLink Infinity units in an A.I.M. network now get time using authenticated NTP from A.I.M. Centralized firmware upgrades As well as managing its own firmware upgrade, A.I.M. manages the upgrade of each device on the network and can deploy firmware to hundreds of devices at the same time, meaning a system-wide upgrade takes only a few minutes. System backups Backups of the database can be saved internally, externally or emailed automatically. Automatic updates can be scheduled on an hourly, daily or weekly basis. AIM-24 Package Contents (1) AIM-24 A.I.M. server unit with integral rack brackets (1) PSU-IEC-12VDC-5A 12V, 5A Power supply + US mains cable (4) Self-adhesive rubber feet (1) Quick start guide and Safety document (1) 2-Year Limited Warranty & Lifetime World Class Support - Expandable up to 5-years
Selle aktiivse USB 2.0 kaabli abil on võimalik pikendada USB kaablit 15m võrra. Vajadusel on võimalik kasutades kahete pikenduskaablit võimendiga kuni 30m.
This spiral hose by Delock can be used to bundle exposed cables and protects them from dirt or damage. Simple mounting The delivery content includes a pulling tool, which allows easy threading of the cables. Reusable The cables can be easily added or removed. Multifunctional application The spiral hose can be used in the office or at home, to ensure an orderly and clearly cable installation. Note The spiral hose should be loosened beforehand by first pulling the pulling tool through the hose without cable. The pulling tool can then be pulled through the spiral hose with the cables more easily. Specification • Length: ca. 2.5 m • Diameter: ca. 30 mm • Reusable • Material: PE • Colour: black Package content • Spiral hose • Pull-in tool
Delocki PCI Express kaart pakub ühte võrguporti, mille andmeedastuskiirus on kuni 2500 Mbit/s. NBASE-T suuremaks kiiruseks Kaasaegsed teenused ja uued tehnoloogiad nõuavad suuremat ribalaiust. NBASE-T tehnoloogia võimaldab tavapäraste võrgukaablitega kiirusi 1 Gbit/s ja 2,5 Gbit/s. Parim võimalik ülekandekiirus määratakse automaatselt. Spetsifikatsioon - Liitmikud: välised: 1 x 2,5 Gigabit LAN RJ45 pesa: 1 x 2,5 Gigabit LAN RJ45 pesa sisemine: 1 x PCI Express x1, V2.1 - Kiibistik: Realtek RTL8125B - Andmeedastuskiirus: Ethernet kuni 10 Mbit/s (pool-/täielik dupleks) Fast Ethernet kuni 100 Mbit/s (pool-/täielik dupleks) Gigabit Ethernet kuni 1000 Mbit/s (pool-/täielik dupleks) NBASE-T kuni 2,5 Gbit/s (pool-/täielik dupleks) PCI Express x1 kuni 2,5 Gbit/s - Ühildub IEEE 802.3, IEEE 802.3u ja IEEE 802.3ab standarditega. - Toetab Wake On LAN (WOL) - Toetab IEEE 802.1P 2. kihi prioriteedi kodeerimist - Toetab IEEE 802.3x täisdupleksset voojuhtimist - Toetab IEEE 802.1Q virtuaalset LANi (VLAN) - Toetab 9k Jumbo raame - LED-indikaator linki ja aktiivsuse kohta Süsteeminõuded - Windows 8.1/8.1-64/10/10-64 - Arvuti, millel on üks vaba PCI Express pesa Paketi sisu - PCI Express kaart - Madala profiiliga klamber - Draiveri CD - Kasutusjuhend
