Võrguseadmed

Meie menuka 4G-ruuteri edule tuginedes on selle täiustatud versioon varustatud mitmekülgse Power over Ethernet (PoE+) funktsiooniga. See töökindel ruuter pakub kahe SIM-kaardi ja eSIM-kaardi toetust, usaldusväärset Wi-Fi-ühendust ja nelja PoE+ Ethernet-porti. RutOS-i platvormil põhinev ja mitmesugusteks IoT-rakendusteks loodud RUT951 PoE+ tagab sujuva andmeedastuse ja lihtsustab ühendatud IoT-lahenduste energiakorraldust.ÜHENDUVUS4G LTE (Cat 4), 3G, 2GKAHE SIM-KAARDI JA eSIMAutomaatse ümberlülitamise, varu-WAN-i ja muude ümberlülitamise stsenaariumidegaPoEKoguvõimsus 90 WWI-FITraadita juurdepääsupunkt koos hotspoti funktsioonigaMobileMobile module4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps3GPP ReleaseRelease 10/11 depending on the hardware versionSIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protectioneSIMConsumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plansStatusIMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNCSMSSMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPPUSSDSupports sending and reading Unstructured Supplementary Service Data messagesBlock/Allow listOperator block/allow list (by country or separate operators)Multiple PDNPossibility to use different PDNs for multiple network access and servicesBand managementBand lock, Used band status displaySIM PIN code managementSIM PIN code management enables setting, changing, or disabling the SIM card's PINAPNAuto APNBridgeDirect connection (bridge) between mobile ISP and device on LANPassthroughRouter assigns its mobile WAN IP address to another device on LANWirelessWireless mode802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)Wi-Fi securityWPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)SSID/ESSIDSSID stealth mode and access control based on MAC addressWi-Fi usersUp to 100 simultaneous connectionsWireless Connectivity FeaturesFast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)Wireless MAC filterAllowlist, blocklistWireless QR code generatorOnce scanned, a user will automatically enter your network without needing to input login informationTravelMateForward Wi-Fi hotspot landing page to a subsequent connected deviceEthernetWAN1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIXLAN3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIXNetworkRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routingNetwork protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLANVoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rules, TTL target customisationFirewall status pageView all your Firewall statistics, rules, and rule countersPorts managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so onNetwork topologyVisual representation of your network, showing which devices are connected to which other devicesHotspotCaptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themesDHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcardsQoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyDNS over HTTPSDNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPSNetwork backupWi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic FailoverLoad balancingBalance Internet traffic over multiple WAN connectionsSSHFSPossibility to mount remote file system via SSH protocolTraffic ManagementReal-time monitoring, wireless signal charts, traffic usage historyPort MirroringMirroring network traffic on Ethernet ports for monitoring and analysisSecurityAuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generatorFirewallPreconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)VLANPort and tag-based VLAN separationMobile quota controlMobile data limit, customizable period, start time, warning limit, phone numberWEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites onlyAccess controlFlexible access control of SSH, Web interface, CLI and TelnetSSL certificate generationLet's Encrypt and SCEP certificate generation methodsVPNOpenVPNMultiple clients and a server can run simultaneously, 27 encryption methodsOpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256IPsecXFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)GREGRE tunnel, GRE tunnel over IPsec supportPPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec supportStunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s codeDMVPNMethod of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub supportSSTPSSTP client instance supportZeroTierZeroTier VPN client supportWireGuardWireGuard VPN client and server supportTincTinc offers encryption, authentication and compression in it's tunnels. Client and server support.OPC UASupported modesClient, ServerSupported connection typesTCPMODBUSSupported modesServer, ClientSupported connection typesTCPCustom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionalitySupported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCIIDATA TO SERVERProtocolHTTP(S), MQTT, Azure MQTTData to serverExtract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server featureMQTT GatewayModbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT brokerDNP3Supported modesStation, OutstationSupported connectionTCPDLMS/COSEMDLMS SupportDLMS - standard protocol for utility meter data exchangeSupported modesClientSupported connection typesTCPAPITeltonika Networks Web API (beta) supportExpand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.comMonitoring & ManagementWEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet statusFOTAFirmware update from server, automatic notificationSSHSSH (v1, v2)SMSSMS status, SMS configurationCallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/offTR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystemMQTTMQTT Broker, MQTT publisherSNMPSNMP (v1, v2, v3), SNMP Trap, Brute force protectionJSON-RPCManagement API over HTTP/HTTPSRMSTeltonika Remote Management System (RMS)IoT PlatformsThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network TypeCumulocity - Cloud of ThingsAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actionsAzure IoT HubCan be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT HubsAWS IoT CoreUtility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionalitySystem CharacteristicsCPUMediatek, 580 MHz, MIPS 24KEcRAM128 MB, DDR2FLASH storage16 MB, SPI FlashFirmware / ConfigurationWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FWRMSUpdate FW/configuration for multiple devices at onceKeep settingsUpdate FW without losing current configurationFactory settings resetA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configurationFIRMWARE CUSTOMISATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with build environment providedGPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needsPackage ManagerThe Package Manager is a service used to install additional software on the devicePOE INPoE portsPort 1 (LAN1)PoE standards802.3af/at compliant PD port (LAN1)POE OUTPoE portsPort 2 - 4 (LAN2, LAN3, WAN)PoE standards802.3af/at compliant PSE ports (LAN2, LAN3, WAN)PoE Max Power per Port (at PSE)30 W MaxPoE Power Budget (at PSE)90 WPowerConnector4-pin industrial DC power socketInput voltage range9 – 57 VDC, reverse polarity protection, surge protection >58 VDC 10us maxPoE-Out input voltage range44 – 57 VDCPower consumptionIdle: < 5 W, Max: < 6.5 W, PoE Max: 100 WPhysical InterfacesEthernet4 x RJ45 ports, 10/100 MbpsI/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connectorStatus LEDs1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x PowerSIM2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional - different hardware required; contact your sales manager)Antennas2 x SMA for LTE, 2 x RP-SMA for Wi-Fi antenna connectorsResetReboot/User default reset/Factory reset buttonPhysical SpecificationCasing materialAluminium housing, plastic panelsDimensions (W x H x D)110 x 50 x 100 mmWeight287 gMounting optionsDIN rail, wall mount, flat surface (all require additional kit)Operating EnvironmentOperating temperature-40 °C to 75 °COperating humidity10% to 90% non-condensingIngress Protection RatingIP30Regulatory & Type ApprovalsRegulatoryCE, UCRF, EAC, UKCA, RCM, WEEEEMC Emissions & ImmunityStandardsEN 55032:2015 + A11:2020EN 55035:2017 + A11:2020EN IEC 61000-3-2:2019 + A1:2021EN 61000-3-3:2013 + A1:2019EN 301 489-1 V2.2.3EN 301 489-17 V3.2.4EN 301 489-52 V1.2.1ESDEN 61000-4-2:2009Radiated ImmunityEN 61000-4-3:2020EFTEN 61000-4-4:2012Surge Immunity (AC Mains Power Port)EN 61000-4-5:2014 + A1:2017CSEN 61000-4-6:2014DIPEN 61000-4-11:2020RFStandardsEN 300 328 V2.2.2EN 301 511 V12.5.1EN 301 908-1 V15.2.1EN 301 908-2 V13.1.1EN 301 908-13 V13.2.1SafetyStandardsCE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017RCM: AS/NZS 62368.1:2022CB: IEC 62368-1:2018

Kompaktne 5G-ruuter Teltonika RUTM20 on ülikompaktne 5G-ruuter, mis on loodud pakkuma kiiret ühendust kaasaegsetele IoT- ja IIoT-rakendustele. Seade töötab ülemaailmse Telit 5G-modemi toel ning toetab nii SA- kui ka NSA-5G-arhitektuure, pakkudes allalaadimiskiirust kuni 3,4 Gbps ja üleslaadimiskiirust kuni 900 Mbps. Laiema ühilduvuse tagamiseks toetab seade ka LTE Cat 19 ja 3G-varuvõimalust, tagades katkematu ühenduse erinevates võrgukeskkondades. Usaldusväärsuse maksimeerimiseks on ruuteril kaks SIM-kaardi pesa ja integreeritud eSIM, mis võimaldab automaatset varundust ja dünaamilist operaatorite vahelist ümberlülitumist. Ümberlülitumist võivad käivitada erinevad tingimused, nagu signaali kadu, andmemahtu piirangud, rändlus või võrgu kättesaamatus. eSIM toetab kuni seitset profiili, võimaldades tsentraliseeritud ja kaugjuhtimist ilma seadmele füüsilise juurdepääsuta. Täiustatud mobiilseire tööriistad pakuvad reaalajas ülevaadet ühenduse kvaliteedist, sealhulgas RSSI, RSRP, SINR ja muudest parameetritest. Sellised funktsioonid nagu sagedusriba lukustamine, mitme PDN-i tugi ja operaatorite kontrollnimekirjad võimaldavad võrgu jõudlust täpselt optimeerida. Lisavõimaluste hulka kuuluvad SMS-i ja USSD-i tugi, mis võimaldab kaugjuhtimist, hoiatusi ja automatiseeritud töövooge. Nende funktsioonidega on RUTM20 ideaalne missioonikriitiliste rakenduste jaoks, nagu transpordisüsteemid, järelevalveinfrastruktuur, nutikate linnade rakendused ja müügipunktide süsteemid, kus stabiilne ja kiire ühendus on hädavajalik. Wi-Fi ja turvalisus RUTM20 pakub ettevõttetasemel võrgustikuvõimalusi kompaktse korpuse sees. Seade toetab nii staatilisi kui ka dünaamilisi marsruutimisprotokolle, sealhulgas BGP, OSPF v2, RIP, EIGRP ja NHRP, võimaldades sujuvat integreerimist keerukatesse võrgustiku arhitektuuridesse. Põhimõtetel põhinev marsruutimine võimaldab täpset liikluse haldamist mitme võrgutee kaudu. Traadita ühenduvust toetab kahe sagedusega Wi-Fi 5 (802.11ac Wave 2), mis pakub kiirust kuni 867 Mbps koos MU-MIMO toega. Ruuter suudab hallata kuni 150 samaaegset traadita ühendust, mis teeb selle sobivaks suure tihedusega keskkondadesse. Täiustatud funktsioonid, nagu võrgustik Mesh (802.11s), kiire rändlus (802.11r) ja raadioressursside haldus (802.11k/v), tagavad stabiilse traadita ühenduse dünaamilistes rakendustes. Võrgu segmentatsioon on võimaldatud tänu VLAN-i toele, mis võimaldab liikluse eraldamist erinevate teenuste või seadmete vahel. QoS ja nutikas järjekorrahaldus (Smart Queue Management) tagavad kriitilise liikluse prioriseerimise, kindlustades viivitusele tundlike rakenduste usaldusväärse toimimise. Turvafunktsioonide hulka kuuluvad konfigureeritav tulemüür koos NAT-i, DMZ-i ja kohandatud reeglitega, samuti kaitse DDoS-rünnakute ja pordiskannimise vastu. Autentimise võimaluste hulka kuuluvad WPA3, X.509 sertifikaadid, TACACS+ ja RADIUS. Seadmel on ka TPM 2.0 moodul, mis tagab parema riistvaratasandi turvalisuse. VPN-tugi hõlmab OpenVPN-i, IPsec-i, WireGuard-i, ZeroTier-i ja muud, võimaldades turvalist kaugjuurdepääsu ja krüpteeritud suhtlust. Lisavõimalused, nagu DNS üle HTTPS-i, hotspot-funktsionaalsus ja koormuse tasakaalustamine, parandavad veelgi võrgu turvalisust ja paindlikkust. Riistvara ja haldus RUTM20 on mõeldud kasutamiseks piiratud ruumiga paigalduskohtades ning selle kompaktne anodeeritud alumiiniumkorpus mõõdab vaid 100 × 30 × 93,7 mm ja kaalub 319 g. Vaatamata oma väiksele suurusele pakub seade tööstuslikku vastupidavust IP30-kaitseklassiga ja töötemperatuurivahemikuga -40 °C kuni +75 °C, mis teeb selle sobivaks kasutamiseks rasketes tingimustes. Ruuteril on kaks Gigabit Etherneti porti (WAN ja LAN) ja mitu antennipistikupesa (4 × SMA mobiilside jaoks ja 2 × RP-SMA Wi-Fi jaoks). Samuti on sellel USB-liides täiendavate ühendusvõimaluste jaoks ning see toetab digitaalset sisendit/väljundit tööstuslikeks juhtimisrakendusteks. RUTM20 peamine eelis on selle Active PoE võime, mis toetab nii PoE sisendit kui ka väljundit (standardid 802.3af/at). See võimaldab seadmel nii toidet vastu võtta kui ka teisi seadmeid toita, lihtsustades paigaldamist ja vähendades kaabeldusvajadusi. Toidet saab edastada ka sisseehitatud kaitsega 4-pin tööstusliku pistikupesa kaudu (9–50 VDC). Ruuter töötab RutOS-i peal, mis on OpenWrt-põhine operatsioonisüsteem, mis toetab kohandamist ja arendamist. Kaugjuhtimine on võimaldatud RMS-i, WebUI-i, SNMP-i, MQTT-i ja TR-069 kaudu, koos FOTA-värskenduste ja üksikasjalike seirevahenditega. See kompaktse disaini, täiustatud toitevalikute ja töökindlate haldusfunktsioonide kombinatsioon teeb RUTM20-st ideaalse lahenduse kaasaegsetele tööstus- ja IoT-rakendustele.

• 8 x 2.5G PoE ports and 2 x 1G/10G SFP+ uplink ports for high-speed industrial networking • High-power PoE++ (IEEE 802.3af/at/bt) with up to 90W per port and a total power budget of 480W • PoE Watchdog automatically detects and restarts unresponsive powered devices • Advanced L3 management with support for RIP, OSPF, and VRRP • 6kV surge protection for reliable operation in harsh environments • Industrial-grade design with a wide operating temperature range of -40°C to 75°C • Flexible installation options, including DIN-rail, wall-mount, and desktop deployment

• Blazing-fast multi-gigabit speeds up to 10G / 5G / 2.5G / 1G / 100 Mbps • Ultra-fast 10G connectivity via USB 3.2 Gen 2x2 for maximum bandwidth performance • Plug & Play with auto-negotiation and auto MDI/MDIX • Energy Efficient Ethernet (IEEE 802.3az) for reduced power consumption • Supports jumbo frames up to 16K bytes for faster data transfer efficiency • Wake-on-LAN (WoL) & Modern Standby for smart power management • Wide compatibility with macOS and Windows systems

• Wired • PCI Express 3.0 Ethernet • Fast Ethernet, Gigabit Ethernet, 2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet 10000 Mbit/s • Internal Component for: Server

• Remotely schedule UPS shutdown, start-up, and reboot • Plug and play installation • User-upgradeable firmware • Secure authentication

• Enhanced Capabilities: Experience unmatched performance and scalability. Built to handle demanding workloads with ease, our device ensures seamless operations and robust reliability. • Remote Monitoring: Stay in control from anywhere. Real-time remote monitoring lets you track device performance and health metrics for proactive management. • Unmatched Security: Design with secure architecture and equip with advanced encryption protocols and innovative design, this device with cybersecure ready. • User-Configurable Firewall: Take control of your network security. Configure and manage firewall settings to suit your unique requirements and keep threats at bay. • Zero-Trust Architecture: Trust no one, verify everything. Our zero-trust model ensures that every access request is authenticated and authorized, minimizing vulnerabilities. • Wake-on-LAN: Power up your devices remotely. Wake-on-LAN functionality ensures accessibility and energy efficiency by enabling devices to be turned on only when needed.