The TL-SF1008P 8-port 10/100M Desktop PoE Switch provides the seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities.With four PoE ports, transfers data and power on one single cableWorking with IEEE 802.3af compliant PDs, expands home and office networkRequires no configuration and installation
The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. IEEE 802.3af compliant Adjustable output power Plug-and-Play installation
USB 3.0 3-Port Hub & Gigabit Ethernet Adapter 2 in 1 USB Adapter Adds 3 additional USB 3.0^ ports that support transfer speed up to 5Gbps, 10 times faster than USB 2.0 Adds Gigabit Ethernet network connectivity that supports transfer speed up to 1000Mbps. Compact and light. Plug and Play* Enhanced Stability and compatibility
Wireless Router, Available bandwidth 300 Mbps, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, 1 WAN, 4x10/100M, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Omni-Directional, Number of antennas 2, Wireless Frequency Range 2.412~2.472 GHz, Windows 10, Windows 8, Windows 7, MacOS, Windows 98, Windows 2000, Windows NT, Windows XP, Windows Vista, Power supply requirements 5VDC / 0.6A, Dimensions 115 x 106.7 x 24.3 mm
USP-RPSThe UniFi® SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure. The USP-RPS continually monitors all attached devices. In the event of an internal AC/DC power supply failure, failover is automatic so your network continues to operate with no interruption in service. With a 950W DC power budget, the USP-RPS can protect a variety of high-power devices, including UniFi PoE switches. An integrated 1.3" color touchscreen LCM displays system information for convenient monitoring.
8-Port 10/100/1,000 Mbps Desktop Switch Eight 10/100/1,000 Mbps auto-negotiation RJ45 ports with auto MDI / MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required Green Ethernet technology saves power by up to 82%
This table microphone by Delock is suitable for use in conferences. Optimal recordings The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded. Touch mute button & status LED The touch mute button quickly mutes the microphone. The LED is red when muted and green when recording. Headphone output The microphone has a 3.5 mm stereo jack output for connecting headphones or speakers. Plug & Play Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux. Specification • Connectors: 1 x USB 2.0 Type-A male 1 x 3.5 mm 3 pin stereo jack female • Directivity: omnidirectional • Sensitivity: -16 dB +/- 3 dB • Frequency range: 100 Hz - 10 kHz • Sample rate: 16 Bit / 44.1 kHz • Signal-to-noise ratio (SNR): ca. 65 dB • Mute-Button • Status LED • Cable length: ca. 1.5 m • Colour: black • Dimensions (Ø x H): ca. 75 x 19 mm • USB bus powered • Plug & Play System requirements • Chrome OS • Linux Kernel 4.4 or above • Mac OS 10.9 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • USB microphone • User manual
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
- Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all! - With advanced Deco Mesh Technology, units work together to form a unified network with a single network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds. - A Deco M4 three-pack delivers Wi-Fi to an area of up to 5,500 square feet (US version). And if that’s not enough, simply add more Decos to the network anytime to increase coverage. - Deco M4 provides fast and stable connections with speeds of up to 1167 Mbps and works with major internet service provider (ISP) and modem. - Deco can handle traffic from even the busiest of networks, providing lag-free connections for up to 100 devices. - Parental Controls limits online time and block inappropriate websites according to unique profiles created for each family member. - Setup is easier than ever with the Deco app there to walk you through every step. Wireless Router 3-pack, Available bandwidth 1200 Mbps
AX3000 Indoor/Outdoor WiFi 6 Access Point - Superior WiFi 6 Speeds: Delivers dual band speeds of up to 3 Gbps powered by the latest WiFi 6 technology. - Higher Network Efficiency: Enjoy faster speeds on more devices with less lag with OFDMA and MU-MIMO. - 160 MHz Bandwidth Channel: Double the data at peak transmission times on a single stream with HE160. - Long-Range Coverage: Dedicated high-power amplifier and professional antennas with an IP67 weatherproof enclosure. - Omada Mesh Technology: Enables wireless connectivity between access points for extended range and flexible deployment. - Stay Smooth with Seamless Roaming: Users can enjoy seamless streaming across the property with their devices switching effortlessly between access points.3 - PoE Powered: : Supports both 802.3at PoE+ and Passive PoE (adapter included) power supply for flexible installation. - Centralized Cloud Management: Omada SDN integration manages the whole network locally or from the cloud via web UI or the Omada app. EAP650-Outdoor Type Wireless Access Point, Data transmission speed 3000 Mbps IEEE 802.11a/b/g, IEEE 802.11n IEEE 802.11ac, IEEE 802.11ax 1x10/100/1000M, Wireless Frequency Range 2.4 GHz, 5 GHz Included Accessories • Passive PoE Adapter• Power Cord• Mounting Kits• Installation Guide, Power supply requirements 802.3at PoE / 48V Passive PoE (PoE Adapter Included) Dimensions 280.4×106.5×56.8 mm
TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+ - 9× gigabit RJ45 ports and 1× combo gigabit SFP/RJ45 port - Equipped with eight 802.3af/at PoE+ ports with up to 30 W for each port, the switch can transfer data and power via one single cable - Supports PoE power up to 123 W for all PoE ports* - Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery - Simple network set-up on top of plug-and-play connectivity - Web-based user interface and Easy Smart Configuration Utility simplify configuration - Fanless design lowers energy consumption and eliminates operating noise
Xiaomi Mesh System | AC1200 EU (2-pack) | 802.11ac | 867 Mbit/s | 10/100/1000 Mbit/s | Ethernet LAN (RJ-45) ports 2 | Mesh Support Yes | MU-MiMO No | No mobile broadband | Antenna type Internal
The Ubiquiti UniFi U7 Pro Wall redefines the standard for wireless network performance and security. Designed to cater to the demands of high-density environments, it supports over 300 connected devices and delivers extensive Wi-Fi coverage across up to 140 sq.m. With the integration of Wi-Fi 6E technology, users can experience speeds up to 5.7 Gbps, ensuring smooth streaming, gaming, and downloading across all connected devices.Security is a priority, and the U7 Pro Wall addresses this with advanced encryption protocols including WPA3, alongside features like Guest Isolation and Private Pre-Shared Key (PPSK), safeguarding your network against unauthorized access. Its wall-mountable design, powered by PoE+, offers a sleek, space-saving solution that is easy to install and manage, making it an ideal choice for businesses, educational institutions, and large residential spaces seeking a reliable, high-performance wireless access point.
D-Link G536 5G NR BE3600 Wi-Fi 7: a modern router that allows you to share a fast 5G or 4G/LTE cellular connection with wired and wireless devices. Just insert a Nano SIM card to create a home or business network without the need to install a permanent cable connection. The router can also use a wired WAN connection and automatically switch between mobile Internet and Ethernet in the event of a primary link failure. The 5G NR modem provides theoretical download speeds of up to 4.67 Gb/s and upload speeds of up to 1.25 Gb/s in SA mode. If there is no 5G coverage, the device can automatically use the 4G/LTE network, offering download speeds of up to 1.6 Gb/s. Two cellular antennas can be replaced with optional external antennas connected to SMA connectors, which allows you to improve signal quality in rooms with weaker coverage. The dual-band Wi-Fi 7 BE3600 network reaches total speeds of up to 3,600 Mb/s: up to 2,882 Mb/s in the 5 GHz band and up to 688 Mb/s in the 2.4 GHz band. Multi-Link Operation and 4K-QAM technologies improve bandwidth utilization, reduce latency and increase connection stability when streaming, gaming, video conferencing and working with multiple devices. The router can support up to 128 devices simultaneously. Two 2.5 Gb/s Ethernet ports allow you to connect computers, switches, NAS servers and other devices that require a fast wired connection. One of the ports can function as WAN or LAN, providing flexible network configuration and the ability to use a wired backup connection. The network can be configured and controlled using the D-Link FALCON application for Android and iOS devices or through the browser-based administration panel. The router supports WPA3 encryption, guest network, parental controls, SPI firewall, IP address filtering and DMZ function. Compatible with select D-Link Wi-Fi Mesh devices to extend your wireless coverage. Device type 5G NR Router with Wi-Fi 7 Manufacturer number G536/E D-Link G536 model Cellular network standard 5G NR, 4G LTE and 3G 5G SA and NSA modes Maximum 5G SA download speed Up to 4.67 Gb/s 5G SA maximum upload speed Up to 1.25 Gb/s 5G NSA maximum download speed Up to 4.67 Gb/s 5G NSA maximum upload speed Up to 836 Mb/s LTE maximum download speed Up to 1.6 Gb/s Maximum upload speed LTE Up to 211 Mbps SIM card type Nano SIM, 4FF format Number of SIM slots 1 Wi-Fi standard Wi-Fi 7, IEEE 802.11be Supported Wi-Fi standards IEEE 802.11be, 802.11ax, 802.11ac, 802.11n, 802.11g, 802.11b and 802.11a Wi-Fi Class BE3600 2.4 GHz and 5 GHz Wi-Fi bands Maximum combined Wi-Fi speed 3600 Mbps Maximum speed on the 5 GHz band 2882 Mbps Maximum speed on the band 2.4 GHz 688 Mb/s Multi-Link Operation Yes 4K-QAM Yes Maximum number of connected devices 128 Ethernet ports 1x 2.5GbE WAN/LAN and 1x 2.5GbE LAN Automatic link switching Yes, between cellular and Ethernet WAN Number of cellular antennas 8 internal External antenna connectors 2x SMA Number of Wi-Fi antennas 5 internal D-Link Wi-Fi Mesh Supported with selected devices Wi-Fi WPA, WPA2 and WPA3 encryption WPS fast connection Stateful Packet Inspection firewall Spoofing protection Anti-spoofing IP address filtering Yes DMZ Yes Guest network Yes Parental controls Yes Management D-Link FALCON application and browser-based administration panel Supported application systems Android and iOS Power, WPS and Reset buttons LED indicator Power, device status and WPS 12 V power supply / 2 A Operating temperature From 0°C to 40°C Operating humidity From 10% to 90%, non-condensing Dimensions 137 x 146 x 205 mm Weight 684 g Color White
This robust industrial router is equipped with 4 x Gigabit Ethernet ports, Quad-core CPU and 256 MB of RAM. These powerful specifications combined with core RutOS software features such as advanced Firewall and RMS support makes this device a superb Industrial performer where no Cellular or WiFi connectivity is required.ETHERNETWAN1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPPVoIP passthrough supportH.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP RelaydQoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRPSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)MONITORING & MANAGEMENTWEB UIHTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notification.SSHSSH (v1, v2)TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystemsSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTPMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717MHzRAM256MB, DDR2FLASH memory256MB SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)Output1 x Digital Output (open collector type, 30V@0.3A)EventsEMAIL, RMSUSBData rateUSB 2.0ApplicationsSamba share, custom scriptsExternal devicesPossibility to connect external HDD, flash drive, additional modem, printerStorage formatsFAT, FAT32, NTFSPOWERConnector4 pin industrial DC power socketInput voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standardsPower consumption11W Max.PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)Ethernet4 x RJ45 ports, 10/100/1000 MbpsStatus LEDs3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LEDPower4 pin industrial DC power socketUSBUSB A socket for external devicesResetReset/restore to default buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions115 mm x 95 mm x 32 mm (H x W x D)Weight357 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10% to 90% non-condensingIngress Protection RatingIP30
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
Wireless Router, Available bandwidth 1167 Mbps, Mesh, IEEE 802.11ac, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, Antenna Type Built-in, Number of antennas 2, Wireless Frequency Range 2.4 GHz and 5 GHz