Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
CRS317-1G-16S+RM The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features,it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance forall sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning TreeProtocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for yourdemanding network. The unit has dual redundant power supplies and passive cooling case, so it’s completely silent - for hotenvironments two redundant fans will automatically keep the system cool if needed. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding,apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IPheader fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features Boot option for SwOS or RouterOS • Non-blocking Layer 2 switching capacity• 16K host table• IEEE 802.1Q VLAN• Supports up to 4K simultaneous VLANs• Port isolation• Port security• Web-based GUI• 800 Mhz CPU• Broadcast storm control• Port mirroring of ingress/egress traffic• Rapid Spanning Tree Protocol• Link Aggregation (LACP)• Access Control List• MikroTik neighbour discovery• SNMP v2/v3• rackmount and tabletop Switching resultsCRS317-1G-16S+RM ModeConfiguration64 byte512 byte1518 bytekppsMbpskppsMbpskppsMbpsSwitchingNon blocking Layer 2 throughput239,583.3122,666.737,828.9154,947.413,085.2158,906.4SwitchingNon blocking Layer 2 capacity239,583.3245,333.337,828.9309,894.713,085.2317,812.7SwitchingNon blocking Layer 1 throughput239,583.3161,000.037,828.9161,000.013,085.2161,000.0SwitchingNon blocking Layer 1 capacity239,583.3322,000.037,828.9322,000.013,085.2322,000.0
TRM250TRM250 is an Industrial Cellular modem with multiple LPWAN connectivity options. It features NB-IoT, LTE Cat-M1 and is backwards compatible with EGPRS (2G). It offers an extremely long lifecycle and is the most flexible option when upgrading the connectivity of existing industrial equipment. TRM250 is equipped with a USB interface, a rugged aluminium housing and is designed for large scale IIoT deployments. The Industrial Cellular Modem TRM250 is a rugged, compact and extremely versatile connectivity device is able to provide cellular capabilities to equipment across IoT and Industrial IoT applications. This futureproof product features both NB-IoT and LTE Cat-M1 LPWAN communication options and is backwards compatible with 2G. This means that you can upgrade your existing infrastructure with a cost-efficient and reliable connectivity device which will adapt to the changing telecommunications environment and will enable you to use the best cellular M2M technologies for many years to come. Easy to deploy, easy to use and even easier to maintain, TRM250 comes with a USB interface for power & communication, drivers supporting all relevant platforms and one SMA connector for an external antenna to obtain better signal coverage.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
Tootekirjeldus inglise keeles: PFS3006-4ET-604-Port Fast Ethernet PoE Switch> Layer two commercial switch> Supports IEEE802.3, IEEE802.3u and IEEE802.3X standards> MAC auto learning, aging, MAC address capacity is 2K> Supports MDI/MDIX self-adaptation> RJ45 port supports 10/100 Mbps self-adaptation> Supports IEEE802.3af and IEEE803.3at power supply standards > Adopts metal enclosure> Supports Hi-PoE 60W> Supports DC 48-57V power supplyTechnical SpecificationModelPFS3006-4ET-60Ethernet Port2*10/100Mbps Uplink ports4*10/100 Mbps PoE portsPoE Power ConsumptionPort1≤60W, Port2-4≤30W, Total≤60WPoE ProtocolIEEE802.3af (PoE), IEEE802.3at (PoE+), Hi-PoESwitching Capacity1.8GbpsPacket Forwarding Rate890kppsPacket Buffer Memory768KbMAC Table Size2KFlow ControlEnable by defaultApplication Humidity10%~90%PowerDC48~57V power adapterLightning ProtectionCommon Mode 2KVDifferential Mode 0.5KVWorking Temperature-10°C~+55°CWeight0.3kgDimension(W×D×H)130mm×85mm×26mm
RUT951 took the best features from one of the most popular Teltonika Networks cellular routers - RUT950. This device features dual SIM 4G cellular connectivity combined with Wi-Fi and 4 Ethernet interfaces to meet the needs of the most varied IoT solutions. Automatic WAN failover to an available backup connection ensures network continuity and eliminates downtime. Powered by RutOS that offers customization options for professional use, automation features, and top-level security for your solution. Compatible with the Teltonika Networks Remote Management System (RMS) enables secure remote management to save time and expenses.
Type Wireless networking USB adapter, Data transmission speed 600 Mbps, IEEE 802.11a/b/g/n/ac, USB 2.0, 64, 128-bit WEP, WPA2 - Wi-Fi Protected Access, Antenna Type Omni-Directional
The ceiling AP on steroids! Mikrotik bestseller cAP is back – juiced up and stronger than ever. Compared to the previous cAP models the improved high-gain antenna increases the covered area by up to 100%!Need a nice-looking access point that won’t get in your way? Or perhaps you’re managing the network in a crowded place and don’t want everyone to have physical access to the device? Either way – ceiling is the answer! The device itself is pretty sleek - the low profile attracts less attention than a smoke detector. Your clients guests or colleagues won’t even notice it. But they will definitely notice the blazing fast wireless connection all across the premises.The new design features a larger high-gain antenna higher sensitivity and a built-in reflector. These improvements allow increasing the covered area by up to 100% compared to the previous cAP models!The dual-band dual-chain 2.4 and 5 GHz wireless radio provides a strong coverage in 360 degrees around it so you don’t have to worry about the placement of the device so much. Putting it on the ceiling eliminates many signal absorption problems such as the signal being blocked by large TV sets metal cubicle walls in open space offices etc.Even though the radio supports repeater mode the two Gigabit Ethernet ports give you the ability to extend your network with cables even if PoE power is required: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.
5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
POE+ 8x PoE porti 802.3af ja 802.3at toega SFP 2 x SFP-porti pikamaa valguskaabelühenduseks ETHERNET 8 x Gigabit Ethernet kiirusega kuni 1000 Mbit/s VÄLJAPIDAMINE VÄLJAPIDAMINE Koguvõimsuse eelarve PSE-s kuni 240 W KESTVUS Vastupidav alumiiniumist korpus KORRALDUS DIN-riba ja pinnapealse paigalduse võimalused TSW200 on Teltonika Networks'i tööstuslik haldamata kommutaator. TSW200 on varustatud 2 SFP-portiga kaugoptilise side jaoks ja 8 Gigabit Ethernet porti, mis toetavad IEEE802.3af ja IEE802.3at Power-over-Ethernet standardeid. See on klassifitseeritud toiteallikaseadmeks (PSE), mis võimaldab tsentraliseerida toiteallika, pakkudes kuni 30 vatti ühe pordi kohta ja vähendades toiteallika paigaldamisega seotud jõupingutusi. Sellel on 10/100/1000 Mbit/s Ethernet-portid, mis pakuvad ökonoomset suure ribalaiusega lahendust teie tööstuslikule Ethernet-võrgule. See töökindel haldamata tööstuslüliti sobib ideaalselt professionaalseteks suure ribalaiusega rakendusteks, kus on vaja pakkuda nii: usaldusväärset andmesideühendust kui ka toiteallikat.
First industrial unmanaged switch from Teltonika Networks. TSW100 is equipped with five Gigabit Ethernet ports, four of which support IEEE802.3af and IEEE802.3at Power-over-Ethernet standards (PoE). This rugged industrial switch is ideal for professional high bandwidth applications where it is necessary to provide both: reliable data connection and power supply. TSW100 – 5-port, unmanaged full Gigabit Ethernet switch supporting Power-over-Ethernet (802.3af and 802.3at standards). This device is classified as power source equipment (PSE), and when used in this way, TSW100 switch enables centralization of the power supply, providing up to 30 watts of power per port and reducing the effort for installing power. It has 10/100/1000 Mbps Ethernet ports to provide an economical high-bandwidth solution for your industrial Ethernet network.
AC1900 Whole Home Mesh Wi-Fi System - One Unified Network – With advanced Mesh Technology, Halo units work together to form a single unified whole-home network with one WiFi name and password. - Seamless Roaming – Automatically switch between Halos as you move around your home, always getting the best signal to enjoy the fastest connections for all your devices. - Whole-Home Coverage – Blanket up to 350 m² with high-speed WiFi, eliminating WiFi dead zones at your home. - 1.9 Gbps Dual Band WiFi – Halo H50G provides fast and stable connections for over 100 devices with speeds of up to 1,900 Mbps and works with major internet service providers (ISPs) and modems. - Easy App Control – Use the MERCUSYS App to quickly set up and manage your WiFi. - Full Gigabit Ports – 3× Gigabit ports per Halo unit for lightning-fast wired connections
Chateau LTE6 ax | Type Wireless Access Point | Wi-Fi 6 | USB | 4x10/100/1000M | 1x2.5GbE | Number of antennas 2 | Wireless Frequency Range 2.4-5Ghz | Dimensions 240 x 156 x 44 mm
AX3000 Whole Home Mesh WiFi 6 System with PoE - AX3000 Dual-Band WiFi – 2402 Mbps (5 GHz) + 574 Mbps (2.4 GHz). - Multiple Installation Options – Place it on a tabletop or install it on a ceiling or wall with the adaptive accessories. - PoE Supported – Power over Ethernet for simplified network deployment. - Multi-Gig 2.5 Gbps Wired Network – 1× 2.5 Gbps port + 1× Gigabit Port. - Seamless AI-Driven Mesh – Intelligently learns your network environment to provide the ideal WiFi unique to your home. - TP-Link HomeShield – Provides comprehensive network protection, robust parental controls, and real-time IoT security. - Universal Compatibility – Backward compatible with all WiFi generations and works with any internet service provider (ISP) and modem. - Setup Made Easier Than Ever – The Deco app walks you through setup step-by-step.
