Brother TN2510 laser toner on kõrge kvaliteediga toonerikassett, mis on mõeldud kasutamiseks teatud Brotheri laserprinteritega. See tooner on ideaalne valik kontoritele ja kodukasutajatele, kes vajavad usaldusväärset ja kvaliteetset printimist. TN2510 tagab teravad ja selged must-valge trükised, olles sobiv valik dokumentide, aruannete ja muude oluliste materjalide printimiseks. Brotheri originaal toonerikassetid on tuntud oma vastupidavuse ja kõrge lehekülgede väljatrüki mahuga, pakkudes kasutajatele pikaajalist ja murevaba printimiskogemust.
Creality SpacePi X4 Filament DryerCreality SpacePi X4 is a powerful dual-chamber filament dryer, allowing you to dry as many as 4 spools simultaneously with full temperature control from 45 to 85°C. Thanks to the active drying technology, fast heating and quiet operation, you will prepare PLA, PETG, TPU, ABS or PA-CF filaments for printing in a reproducible and stable way, eliminating the problem of moisture, bubbles and shagging during printing.Dry a variety of filamentsThe device features two independently controlled heating chambers, allowing you to set different temperatures for different filaments (e.g. 50°C for PLA and 85°C for PA-CF). You can use one or both chambers as needed, which saves time and energy in a small workshop or when working with different materials at the same time.Speed and uniformityWith 200W + 200W PTC heaters, SpacePi X4 heats up to 85°C in about 20 minutes. The 360° air circulation ensures even heat distribution, and the SpaceDry 4.0 technology with active dehumidification and desiccant regeneration guarantees effective moisture removal without changing cartridges.Quiet, cheap, efficientThe Active Silent system keeps noise levels to just 43-46 dB, allowing you to work comfortably at home and in the workshop. The Creality SpacePi X4 offers energy-efficient operation with an energy consumption of 0.124 kWh in single-chamber mode and 0.208 kWh in dual-chamber mode, reducing the cost of preparing filaments for printing.Wide compatibilityThe Creality SpacePi X4 filament dryer supports spools up to 200 mm in diameter and 150 mm in width with 1.75 mm and 2.85 mm diameter filaments. So you can dry both standard 1 kg spools and larger spools weighing 2 kg.Safe operationThe Creality SpacePi X4's triple protection system includes fan control, heater temperature protection and sensors that monitor the temperature in the chambers. This allows you to use the device without worrying about overheating or damaging the filaments.Everyday convenienceThe dryer is equipped with a chamber backlight, a sliding lock, anti-burn rollers and a moisture-proof seal to ensure comfort. In addition, the device signals the end of drying with a sound, making it easy to use.You control as you pleaseThe EDry UI panel allows you to precisely control drying parameters, including temperature, drying time (1-48 hours) and threshold humidity. You can use automatic modes or custom settings to tailor the drying process to the requirements of your specific filament.Included:Filament dryerPower cordUser manual ManufacturerCrealityModelSpacePi X4Manufacturer code4005010100Rated power360WTemperature range45~85°CDrying time1-48 hInput voltage220-240V50/60HzSupported filamentSpool diameter: ≤200 mmWidth: ≤150 mmFilament diameter: 1.75 / 2.85 mmDimensions382 × 290 × 270 mmWeight5 kg
Brother TN2510 laser toner on kõrge kvaliteediga toonerikassett, mis on mõeldud kasutamiseks teatud Brotheri laserprinteritega. See tooner on ideaalne valik kontoritele ja kodukasutajatele, kes vajavad usaldusväärset ja kvaliteetset printimist. TN2510 tagab teravad ja selged must-valge trükised, olles sobiv valik dokumentide, aruannete ja muude oluliste materjalide printimiseks. Brotheri originaal toonerikassetid on tuntud oma vastupidavuse ja kõrge lehekülgede väljatrüki mahuga, pakkudes kasutajatele pikaajalist ja murevaba printimiskogemust.
Brother BTD100BK. Tüüp: Originaal, Printimisvärvid: Must, Brändiühilduvus: Brother. Kogus pakis: 1 tk, Mõõdud (l x s x k): 56 x 123 x 55,5 mm, Pakendi kaal: 180 g
LEXMARK CS/X73x 28K must reflow programmikassett on suure võimsusega laserprinterikassett, mis on mõeldud suure printimiskvaliteediga printimiseks suure mahuga trükikeskkondades. Spetsiaalselt Lexmark CS- ja X-seeria printeritele mõeldud kassett pakub silmapaistvat 28 000 lehekülje tootlikkust, mis teeb sellest kulutõhusa valiku ettevõtetele, kes vajavad printimistööde puhul tõhusust ja vastupidavust. Must tooner tagab rikkalikud, sügavad mustad toonid ja elava teksti, nii et iga trükitud dokument on professionaalsete standardite kohane. See kassett on osa Lexmarki tagasivõtuprogrammist, mis on jätkusuutlik algatus, mis võimaldab tarbijatel säästa raha, aidates samal ajal kasutatud kassettide taaskasutamise kaudu keskkonda kaitsta. Lihtsalt paigaldatav disain tagab minimaalse seisakuaja, nii et saate säilitada tootlikkuse muretult. Olenemata sellest, kas trükite aruandeid, suure mahuga dokumente või turundusmaterjale, on LEXMARK CS/X73x must 28K tagastusprogrammi kassett loodud nii, et see tagab iga kord ühtlase jõudluse ja kvaliteetsed tulemused.
