PLA Starter filament by Rosa3D was created for beginners of 3D printng. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: blackDiameter: 1.75 mmWeight: 3 kg (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PC/PBT (HT-UV-IMPACT) is a filament for industrial and automotive applications. The material has been modified for impact strength and heat resistance, and infused with an anti-UV stabiliser. The addition of polybutylene terephthalate (PBT) to Polycarbonate means less deformation on 3D printed parts than with pure PC.[more]The material is easier to print than PC and most common PC/ABS blends, does not emit unpleasant odours during printing has relatively low shrinkage for this group of materials (up to 1%) and very good adhesion to the table. Its excellent mechanical properties, very good impact strength and resilience, combined with the ability to be used outdoors (UV resistant) and the possibility of operating at relatively high temperatures (90-110C), make it an excellent construction material with a wide range of applications. Both in terms of impact strength and temperature resistance, the material performs better than the popular PET-G and ABS, while it is easier to print than PC and PC-ABS.Recommended printing parametersextrusion temperature 240-260°Cbed temperature: 90-110°Cchamber temperature: 50-80°Cair supply: 0-20% (depends on model geometry)compatible worktables: glass, smooth PEI, textured PEI, The filament can be printed on both direct and Bowden feed printers. We recommend closing the chamber. If there are problems with adhesion, we recommend using adhesion formulations. Due to the high printing temperatures, it will be necessary to fit a full-metal heatbreak (without the Teflon tube inside).PRODUCT PARAMETERSColor: blackDiameter: 1.75 mmWeight: 500 g ( vacuum packed)Density: 1.20 g/cm3Odor: odourlessVicat softening point: 120°C (50N, 50°C/h)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,02
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product.Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: blackDiameter: 1.75 mmWeight: 1000 g (vacuum packed)Density: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
PET-G (poly(ethylene terephthalate) with addition of glycol) is a material that is easy to print, has high transparency and is odourless. Applications: prototyping, large-format printing, lampshades/enclosures. PET-G Standard filament from ROSA3D is characterised by an ease of printing comparable to PLA. It is dedicated for users who deal with amateur and professional 3D printing. Details made from PET-G Standard are feature precise details, good adhesion to the bed, no odour and a low level of shrinkage. Prints made from PET-G Standard are distinguished by their high chemical resistance. They can be subjected to sandblasting, drilling, sawing, grinding, cutting and painting without compromising the structural integrity of the component. PET-G Standard filament was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Recommended printing parameters extrusion temperature 220-250°C bed temperature: 60-80°C fan: 0-60% Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: Neon Yellow Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.29 g/cm3 Odor: odourless Heat distortion temperature: 78°C (ISO 306) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 6 % Tensile strength (to break): 20 MPa
Creality K2 Plus Combo16 värvi, tõstke oma loovustCFS on varustatud tagaküljel oleva ühenduskeskusega. Ühendades kokku kuni neli CFS-seadet, saate printida 16 värvi* hiilguses. Säästab vajaduse täiendava värvimise järele.*K2 Plus
Kõrge soojusjuhtivusega ühtlane küteTäismetallist soojuspurt, kõrge temperatuurikindlus kuni 300 ℃Töötlemise täiendamine parema printimise jaoks32 mm³/s kõrge voolu, 600 mm/s kiire printimise toetamineÜhildub K1, K1 Maxiga
Creality K1-SE 3D PrinterThe Creality K1-SE is an exceptionally powerful 3D printer that reaches speeds of up to 600 mm/sec and acceleration of 20,000 mm/sec², the K1-SE allows you to print much faster than most competing models. Its robust design makes it suitable for both home workshops and studios. Thanks to factory calibration and quick setup, the device is ready to use in just a few after unpacking.Dual extruder - fewer jams, better material flowThe dual extruder drive system used in the K1-SE ensures stable feeding of the filament, resulting in fewer jams and better control over material flow. The ceramic heating element heats up very quickly, reducing prepress time. In addition, the titanium tube and high-strength steel nozzle ensure long life.Stability and printing accuracyThe designers of the K1-SE relied on the combination of a lightweight print head and a metal frame. The rigidity of the structure and the G-sensor used eliminate micro-vibrations generated during high-speed operation, resulting in higher detail accuracy. The entire mechanics work smoothly and stably, allowing the printer to work efficiently even with more complex models.Printing without calibrationThe Creality K1-SE has been assembled and calibrated already at the production stage. This means that after taking it out of the package, all you have to do is plug it in, load the filament and start printing. In addition, the device is equipped with an automatic table calibration function that adjusts the height of the working platform on its own.Customize the K1-SE to suit your needsThe K1 SE offers a barebone 3D printing solution that can be easily modified by adding printed side panels, a side spool holder, etc. The reserved USB ports are perfect for connecting a webcam or other accessories.Smart features and user-friendly interfaceCreality OS, which runs on Klipper, enables many advanced functions such as linear progress and input shaping. In addition, Creality Print 5.0 software offers a variety of features to increase productivity and print quality. Creality Cloud, on the other hand, is a platform for accessing countless models in various categories, printing in the cloud and connecting with other 3D printing enthusiasts.Included3D printertouchscreenfilamentwrench and screwdriverspatulafilament holderpliersflash drivepower cableM6 socket wrenchuser manualcleaning nozzle 1.2 mm ManufacturerCrealityModelK1-SEPrinting technologyFDMPrint size220 x 220 x 250 mmPrinter dimensions355 x 355 x 482 mmWeight10.24 kgPrinting speed≤600 mm/secAcceleration≤20000 mm/s²Printing accuracy100±0.1 mmLayer height0.1-0.35mmExtruderwith direct drive with double transmissionFilament diameter1.75mmNozzle diameter0.4 mmNozzle temperature≤300℃Temperature of heated platform≤100℃Printing platformEpoxy resin structural plateLeveling modeAutomaticFile transferflash drive, Wi-FiScreentouch screen, colorCameraoptionalPower loss recoveryyesFilament exhaustion sensoryesAir cleanernoInput shapingyesLighting setyesSleep modeyesRated voltage100-120V~, 200-240V~, 50/60HzRated power350 WPrinting materialsHyper PLA/PLA/PETG/TPUSupported file formatG-CodeSoftwareCreality Print 5.0, Cura, PrusaSlicerSupported file format for printingSTL, OBJ, 3MFInterface languagesEnglish, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Korean, Chinese
Schneller 3D-Druck, beeindruckende Ergebnisse: Das CR-PLA Matte Navy Blue von Creality zeichnet sich besonders durch seine matte Oberfläche aus. Die bedruckte Oberfläche dieses 3D-Filaments streut das Licht und verleiht gedruckten Objekten ein mattes Aussehen - für einen eleganten und professionellen Look mit angenehmer Textur. Diese Rolle enthält 1 Kilogramm Filament in marineblau.
ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: gray Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:
ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: white Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:
PLA-Silk is a durable and easy to use filament characterized by intense color and exceptional gloss. Prints made with the PLA-Silk product line filament have an eye-catching luminous surface. Application decorations elements of interior design, luminous sculptures, toys, figurines gadgets (e.g. pendants, key rings) PLA Silk is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. Printable model for refill spool sides you can download here: PRODUCT PARAMETERS Color: silk silver Diameter: 1.75 mm Weight: 1000 g (vacuum packed) (refill packing (without plastic spool) Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors. PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here: Recommended printing parameters: extrusion temperature 185-225°C bed temperature: 40-60°C fan: 50-100% print speed: 60-80 mm/s The filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive. PRODUCT PARAMETERS Color: light brown Diameter: 1.75 mm Weight: 1000 g (vacuum packed) refill packing without plastic spool Density: 1.24 g/cm3 Odor: odorless Heat deformation temperature: 55°C (ASTM E2092) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,05 Tensile elongation: 6 % Tensile strength (to break): 53 MPa
PCTG is an advanced 3D printing filament, belonging to the same polyester family as the popular PET-G. Compared to PET-G, PCTG has higher impact strength, heat resistance (up to 76°C) and transparency. It offers an interesting alternative to PET-G. Like PET-G, PCTG does not require a heated print chamber, making it an excellent choice if you plan to print on open hobby printers.PCTG is characterized by high flexibility, strong adhesion between layers, high viscosity and minimal shrinkage. Its characteristics enable easy and efficient printing, even for those without much 3D printing experience. 3D printing using PCTG is widely used in various sectors. In industry, it is an ideal choice for creating parts, small batch production and usable models, confirming the versatility of this material. The automotive sector also benefits from the advantages of PCTG, using it to print accessories, components in the engine compartment, vehicle component housings, as well as components such as air intakes and fluid inlets (chemical resistance). In the world of sport, PCTG proves its value in the production of various types of accessories, protectors, etc. The properties of this material guarantee not only the high durability of the finished prints, but also their aesthetics and functionality. APPLICATION- spare parts,- small batch production,- utility models,- engine compartment accessories and components,- vehicle component housings,- air intakes,- service fluid inlets,- sports accessories, protectors, etc. HOW TO PRINTRecommended printing temperature 240-270°C.Recommended table temperature: 60-80°C.Heated table required TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 1000g Print temperature 240-270 °CBed temperature 60-80 °C PHYSICAL PARAMETERS Density 1,24 g/cm3Odor OdorlessTensile strength (to break) 46 MPaNotched Izod impact strength 92 kJ/m2Vicat softening point 76/64 °C (0,455 MPa/1,82 Mpa) Printable model for refill spool sides you can download here: Recommended printing parameters:
ROSA-Flex 96A is a thermoplastic polyurethane (TPU). It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum). ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors. ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product. APPLICATIONHobby: smartphone cases, drone elements, elements for RC carsTechnical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses HOW TO PRINTRecommended printing temperature 220-250°CRecommended bed temperature: 30-60°CRecommended cooling:50-100% (depends on the geometry of the model)Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)Compatible bed materials: glass, smooth PEI, textured PEI, alluminum. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0.05 mmOval tolerance +/- 0.02 mmNet weight 500 gPrint temperature 220-250 °CBed temperature 30-60 °C HYSICAL PARAMETERSDensity 1,22 g/cm3Odor OdorlessTensile elongation 350 % (EN 12803)Vicat softening point 126°C (ISO 306)
1064 nm 2W Infrared Laser Module for xTool S1The xTool infrared laser module with a wavelength of 1064 nm and a power of 2 W is a precision tool designed for marking and engraving metals and everyday objects. It operates at speeds of up to 600 mm/s and performs exceptionally well on materials such as gold, silver, copper, and titanium, allowing you to create detailed designs on jewelry, accessories, and other metal surfaces. Thanks to its high operating speed, the product accelerates project completion while maintaining precision and detail quality. This is the solution for those who want to expand their device’s capabilities with precise and efficient infrared laser engraving. The module is compatible with the xTool S1 engraver. ManufacturerxToolModelP5010248Laser TypeInfraredWavelength1064 nmPower2 WCompatibilityxTool S1Working SpeedUp to 600 mm/s
• Roheline Polülaktiid (PLA) • 1 kg 2,85 mm • Brändiühilduvus: Kõik tootjad • Väljumistemperatuur: 210 °C Tõmbemoodul: 63 MPa • 1 tk Verbatim 55334, 1 tk, 1 kg
eSun ABS+ 1.75mm 1kg Cold White filament – valge eSun on tuntud bränd 3D printerite kasutajate ja tootjate seas. Oma tegevust alustas eSun juba aastal 2007. eSun on ROHS, REACH, FDA, ja EN71-3 sertifitseeritud tootja. Tuntud ka oma hea kvaliteedi ja hinna suhtega materjalide poolest. Tehnilised andmed: Kaal: 1KG/Spool Diameeter: 1.75MM Printimise temperatuur: :220-260℃ Soojendatava aluse temperatuur: 90-110℃ Soovitatav printimise kiirus: 40-100mm/s Tõmbetugevus (MPa): 40 Pikenemine purunemisel (%): 30 Paindetugevus (MPa): 68 Paindemoodul (MPa): : 2443 IZOD (KJ/M2): 42
PLA Starter filament by Rosa3D was created for beginners of 3D printing. The simplicity of printing with our PLA Starter will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects. The PLA Starter filament is available in a wide range of colors.PLA Starter is characterized by low shrinkage and no unpleasant odor. Printouts from PLA Starter are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food. In the case of products that come into contact with food, certification is the responsibility of the manufacturer of the final product. Printable model for refill spool sides you can download here:Recommended printing parameters:extrusion temperature 185-225°Cbed temperature: 40-60°Cfan: 50-100%print speed: 60-80 mm/sThe filament can be printed on unheated tables. In case of problems with adhesion, we recommend the use of an adhesive.PRODUCT PARAMETERSColor: karmin redDiameter: 1.75 mmWeight: 1000 g (vacuum packed) refill packing without plastic spoolDensity: 1.24 g/cm3Odor: odorlessHeat deformation temperature: 55°C (ASTM E2092)Diameter tolerance: +/- 0,05Oval tolerance: +/- 0,05Tensile elongation: 6 %Tensile strength (to break): 53 MPa
