ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: blue Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:
ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: gray Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:
ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: red Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:
ASA (acrylonitrile-styrene-acrylic) filament from ROSA3D is a polymer resistant to UV radiation, moisture and heat. ASA‘s resistance to UV radiation makes it a suitable material for outdoor applications, e.g. parts that will be intensively exposed to the sun and various weather conditions. ASA is ideal when you need a high-performance material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less irritating. The softening point of ASA prints is higher compared to PLA and PET-G, there is no signs of deformation up to a temperature of approx. 94 ° C. The unique mechanical and thermal properties of ASA together with excellent resistance to UV radiation make it a great choice for automotive, marine and exterior applications such as mirror, radiator or sensor covers. Recommended printing parameters: extrusion temperature 220-250°C bed temperature: 90-110°C The adhesion of the first layer can be improved with ASA slurry (ASA material dissolved in acetone).It is recommended to print in a closed chamber. PRODUCT PARAMETERS Color: white Diameter: 1.75 mm Weight: 1000 g (vacuum packed) Density: 1.07 g/cm3 Odor: almost odorless Vicat softening point: 94 ° C (ASTM 1525) Diameter tolerance: +/- 0,05 Oval tolerance: +/- 0,02 Tensile elongation: 35 % Tensile strength (to break): 40 MPa Printable model for refill spool sides you can download here:
BioWOOD by Rosa3D is an easy to print FILAMENT recommended for both professionals and beginners. The material displays very minor moulding shrinkage in printing, and can be printed in an open device.BioWOOD printouts can be subjected to mechanical treatment (such as sanding, lathing, drilling, etc.) as well as painting and lacquering, like wooden elements.BioWOOD is manufactured from a biopolymer consisting of 100% natural and 100% renewable resources. They decompose in a natural oxygen-free environment (compost).BioWOOD smells like natural wood. The material from which the BioWood filament is made is approved for contact with food. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product.APPLICATIONDecorative elements, dishes (bowls, plates, cups, cutlery), toys, musical instruments, furniture also renovate wooden elements.HOW TO PRINTRecommended printing temperature 170-210°C.Recommended bed temperature: 30-50°C.For non-heated beds, it is recommended to use an adhesive agent.Recommended nozzle size: 0,5mm (due to the contents of wood particles).
BioWOOD by Rosa3D is an easy to print FILAMENT recommended for both professionals and beginners. The material displays very minor moulding shrinkage in printing, and can be printed in an open device.BioWOOD printouts can be subjected to mechanical treatment (such as sanding, lathing, drilling, etc.) as well as painting and lacquering, like wooden elements.BioWOOD is manufactured from a biopolymer consisting of 100% natural and 100% renewable resources. They decompose in a natural oxygen-free environment (compost).BioWOOD smells like natural wood. The material from which the BioWood filament is made is approved for contact with food. However, in case of products that come into contact with food, certification lies with the manufacturer of the final product.APPLICATIONDecorative elements, dishes (bowls, plates, cups, cutlery), toys, musical instruments, furniture also renovate wooden elements.HOW TO PRINTRecommended printing temperature 170-210°C.Recommended bed temperature: 30-50°C.For non-heated beds, it is recommended to use an adhesive agent.Recommended nozzle size: 0,5mm (due to the contents of wood particles).
<div class="descr"> <h3 class="red">Filament, matte PLA, military green, 1.75 mm, 1 kg</h3> <ul class="red-list"> <li>VERSATILE & EASY TO USE</li> <li>PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.</li> <li>It has no odor, a lower melting point and good flowbility, no need to post-treatment</li> <li>The material is composed of PLA and ester</li> <li>Matte surface</li> </ul> </div> <div id="slider2"> <div class="thumbelina-but vert bottom disabled" id="fwd3"></div> </div>
<ul class="red-list"> <li>VERSATILE & EASY TO USE</li> <li>PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.</li> <li>It has no odor, a lower melting point and good flowbility, no need to post-treatment</li> <li>The material is composed of PLA and ester</li> <li>Matte surface</li> </ul> <table class="tbldata" width="100%"> <tbody> <tr> <td>Material: PLA, 1.75 mm diameter</td> </tr> <tr> <td>Weight: 1 kg/spool (2.2 lbs)</td> </tr> <tr> <td>Length: approx. 340 m</td> </tr> <tr> <td>Density at 21.5 °C: 1.21 g/cm3</td> </tr> <tr> <td>Melt Flow Index at 10min, 2.16kg: 6...8</td> </tr> <tr> <td>Melt Point: 190 - 220 °C</td> </tr> <tr> <td>Heat-Deflection-Temperature at 0.455 MPa: 50 °C</td> </tr> <tr> <td>Yield Strength at 5mm/min: > 30 MPa</td> </tr> <tr> <td>Impact Strength: 5 KJ/m2</td> </tr> <tr> <td>Tensile Break: 20 %</td> </tr> <tr> <td>Diameter: 1.75 ± 0.05 mm</td> </tr> <tr> <td>Spool dimensions: 200 mm diameter x 67 mm height x 60 mm central hole</td> </tr> </tbody> </table> <p> </p>
<ul class="red-list"> <li>VERSATILE & EASY TO USE</li> <li>PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.</li> <li>It has no odor, a lower melting point and good flowbility, no need to post-treatment</li> <li>The material is composed of PLA and ester</li> <li>Matte surface</li> </ul> <table class="tbldata" width="100%"> <tbody> <tr> <td>Material: PLA, 1.75 mm diameter</td> </tr> <tr> <td>Weight: 1 kg/spool (2.2 lbs)</td> </tr> <tr> <td>Length: approx. 340 m</td> </tr> <tr> <td>Density at 21.5 °C: 1.21 g/cm3</td> </tr> <tr> <td>Melt Flow Index at 10min, 2.16kg: 6...8</td> </tr> <tr> <td>Melt Point: 190 - 220 °C</td> </tr> <tr> <td>Heat-Deflection-Temperature at 0.455 MPa: 50 °C</td> </tr> <tr> <td>Yield Strength at 5mm/min: > 30 MPa</td> </tr> <tr> <td>Impact Strength: 5 KJ/m2</td> </tr> <tr> <td>Tensile Break: 20 %</td> </tr> <tr> <td>Diameter: 1.75 ± 0.05 mm</td> </tr> <tr> <td>Spool dimensions: 200 mm diameter x 67 mm height x 60 mm central hole</td> </tr> </tbody> </table> <p> </p>
<ul class="red-list"> <li>VERSATILE & EASY TO USE</li> <li>PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.</li> <li>It has no odor, a lower melting point and good flowbility, no need to post-treatment</li> <li>The material is composed of PLA and ester</li> <li>Matte surface</li> </ul> <table class="tbldata" width="100%"> <tbody> <tr> <td>Material: PLA, 1.75 mm diameter</td> </tr> <tr> <td>Weight: 1 kg/spool (2.2 lbs)</td> </tr> <tr> <td>Length: approx. 340 m</td> </tr> <tr> <td>Density at 21.5 °C: 1.21 g/cm3</td> </tr> <tr> <td>Melt Flow Index at 10min, 2.16kg: 6...8</td> </tr> <tr> <td>Melt Point: 190 - 220 °C</td> </tr> <tr> <td>Heat-Deflection-Temperature at 0.455 MPa: 50 °C</td> </tr> <tr> <td>Yield Strength at 5mm/min: > 30 MPa</td> </tr> <tr> <td>Impact Strength: 5 KJ/m2</td> </tr> <tr> <td>Tensile Break: 20 %</td> </tr> <tr> <td>Diameter: 1.75 ± 0.05 mm</td> </tr> <tr> <td>Spool dimensions: 200 mm diameter x 67 mm height x 60 mm central hole</td> </tr> </tbody> </table> <p> </p>
<ul class="red-list"> <li>VERSATILE & EASY TO USE</li> <li>PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.</li> <li>It has no odor, a lower melting point and good flowbility, no need to post-treatment</li> <li>The surface shows a metal texture after polishing.</li> <li>Carbon fiber is a mixture of carbon and PLA polymer.</li> </ul>
<ul class="red-list"> <li>VERSATILE & EASY TO USE</li> <li>PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.</li> <li>It has no odor, a lower melting point and good flowbility, no need to post-treatment</li> <li>The material is composed of PLA and ester</li> <li>The effect of "silk" on the surface</li> </ul> <div class="tab3"> <table class="tbldata" width="100%"> <tbody> <tr> <td>Material: PLA, 1.75 mm diameter</td> </tr> <tr> <td>Weight: 1 kg/spool (2.2 lbs)</td> </tr> <tr> <td>Length: approx. 340 m</td> </tr> <tr> <td>Density at 21.5 °C: 1.21 g/cm3</td> </tr> <tr> <td>Melt Flow Index at 10min, 2.16kg: 6...8</td> </tr> <tr> <td>Melt Point: 190 - 220 °C</td> </tr> <tr> <td>Heat-Deflection-Temperature at 0.455 MPa: 50 °C</td> </tr> <tr> <td>Yield Strength at 5mm/min: > 30 MPa</td> </tr> <tr> <td>Impact Strength: 5 KJ/m2</td> </tr> <tr> <td>Tensile Break: 20 %</td> </tr> <tr> <td>Diameter: 1.75 ± 0.05 mm</td> </tr> <tr> <td>Spool dimensions: 200 mm diameter x 67 mm height x 60 mm central hole</td> </tr> </tbody> </table> </div> <p> </p> <div class="tab3"> <table class="tbldata" width="100%"> <tbody> <tr> <th>System requirements</th> </tr> <tr> <td>A 3D printer with 1.75 mm extruder of temperature around 200 °, suitable for PLA filament</td> </tr> </tbody> </table> </div> <h3> </h3>
<div class="descr"> <ul class="red-list"> <li>VERSATILE & EASY TO USE</li> <li>PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.</li> <li>It has no odor, a lower melting point and good flowbility, no need to post-treatment</li> <li>The material is composed of PLA and ester</li> <li>The effect of "silk" on the surface</li> </ul> <table class="tbldata" width="100%"> <tbody> <tr> <td>Material: PLA, 1.75 mm diameter</td> </tr> <tr> <td>Weight: 1 kg/spool (2.2 lbs)</td> </tr> <tr> <td>Length: approx. 340 m</td> </tr> <tr> <td>Density at 21.5 °C: 1.21 g/cm3</td> </tr> <tr> <td>Melt Flow Index at 10min, 2.16kg: 6...8</td> </tr> <tr> <td>Melt Point: 190 - 220 °C</td> </tr> <tr> <td>Heat-Deflection-Temperature at 0.455 MPa: 50 °C</td> </tr> <tr> <td>Yield Strength at 5mm/min: > 30 MPa</td> </tr> <tr> <td>Impact Strength: 5 KJ/m2</td> </tr> <tr> <td>Tensile Break: 20 %</td> </tr> <tr> <td>Diameter: 1.75 ± 0.05 mm</td> </tr> <tr> <td>Spool dimensions: 200 mm diameter x 67 mm height x 60 mm central hole</td> </tr> </tbody> </table> </div> <div id="imgView"></div>
<ul class="red-list"> <li>VERSATILE & EASY TO USE</li> <li>PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.</li> <li>It has no odor, a lower melting point and good flowbility, no need to post-treatment</li> <li>The material is composed of PLA and ester</li> <li>The effect of "silk" on the surface</li> </ul> <div class="tab3"> <table class="tbldata" width="100%"> <tbody> <tr> <td>Material: PLA, 1.75 mm diameter</td> </tr> <tr> <td>Weight: 1 kg/spool (2.2 lbs)</td> </tr> <tr> <td>Length: approx. 340 m</td> </tr> <tr> <td>Density at 21.5 °C: 1.21 g/cm3</td> </tr> <tr> <td>Melt Flow Index at 10min, 2.16kg: 6...8</td> </tr> <tr> <td>Melt Point: 190 - 220 °C</td> </tr> <tr> <td>Heat-Deflection-Temperature at 0.455 MPa: 50 °C</td> </tr> <tr> <td>Yield Strength at 5mm/min: > 30 MPa</td> </tr> <tr> <td>Impact Strength: 5 KJ/m2</td> </tr> <tr> <td>Tensile Break: 20 %</td> </tr> <tr> <td>Diameter: 1.75 ± 0.05 mm</td> </tr> <tr> <td>Spool dimensions: 200 mm diameter x 67 mm height x 60 mm central hole</td> </tr> </tbody> </table> </div> <p> </p> <div class="tab3"> <table class="tbldata" width="100%"> <tbody> <tr> <th>System requirements</th> </tr> <tr> <td>A 3D printer with 1.75 mm extruder of temperature around 200 °, suitable for PLA filament</td> </tr> </tbody> </table> </div> <h3> </h3>
