ROSA 3D Filament: ABS+ | 1.75mm | black | 230÷270°C | 1kg | Table temp: 80÷110°C

ABS+ material is a widely applicable engineering plastic with moderate shrinkage (0.4-0.7%).Excellent processing properties such as good flow, bright, vivid colours and very good layer adhesion allow a wide range of applications for this filament. ABS+ has a high impact strength and is impact resistant. ABS+ from ROSA3D gives an elegant semi-matte finish to the surface of prints. It can be smoothed with acetone. APPLICATION- Prototypes of machine parts, gadgets, exhibition models- Parts in electronics- Computer parts- Toys: building blocks, car components, educational aids HOW TO PRINTextrusion temperature: 230-270°C , table temperature: 80-110°CPrinting in a closed chamber on a heated table is recommended. If there are problems with adhesion, we recommend using an adhesion agent. Print cooling is recommended. Its power should be adapted to the capabilities of the printer and the geometry of the model being printed. NOTE: Printing in a well-ventilated room is recommended. Do not stay in the room for long periods of time when printing with an open chamber due to the irritating smell and fumes, which may cause dizziness or headaches in sensitive people. TECHNICAL PARAMETERSDiameter 1.75 mmDiameter tolerance +/- 0,05Oval tolerance +/- 0,02Net weight 1000 g/ 2500 gPrint temperature 230-270 °CBed temperature 80-110 °C PHYSICAL PARAMETERSDensity 1,05 g/cm3Odor irritatingTensile elongation 2,5 %Tensile strength (to break) 44 MPaTensile modulus 2276 MPaThermal deformation temperature 99 Papildymo pakuotė (refill) - komplekte nėra plastikinės ritės - daugkartinę ritę galima atsispausdinti brėžinį galima atsisiųsti iš čia