Kõik hinnakirjad

4Pin, mis on pühendatud ARGB PWM -i fännidele jaoturi kontrolleri PWM -šassii fännidele emaplaadi adapter

5 pordiga pwm ventilaatori hub pc ventilaatori hub, 4-kontaktiline pwm cpu jahutusventilaatori jagaja hub adapterikaabel 1 emane kuni 5 isane pwm ventilaatori jagaja hub adapterikaabel 12 v lauaarvuti jahuti korpuse ventilaatorile

Alphacool's Core 120mm is a quiet and efficient fan with a wide control range up to 3000 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 120mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 3000 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 93.6 CFM combined with a high static pressure of 7.83mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)120 x 120 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing TypeTwo Ball BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.25 (Max: 0.38) ARated Power3.0 (Max: 4.56) WRated Speed0 - 3000 rpm ±10%Max. Air Flow93.6 CFMMax. Static Pressure7.83mm-H2ONoise level43.0 (Max:45.0) dBALife Expectance70000 h at 40 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+70 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years???? Warranty Terms

Alphacool's Core 120mm is a quiet and efficient fan with a wide control range up to 4000 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 120mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 4000 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 119.8 CFM combined with a high static pressure of 12.67 mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)120 x 120 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing TypeTwo Ball BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.53 (Max: 0.67) ARated Power6.36 (Max: 8.04) WRated Speed0 - 4000 rpm ±10%Max. Air Flow119.8 CFMMax. Static Pressure12.67 mm/H2ONoise level49.5 (Max: 51.5) dBALife Expectance70000 h at 40 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+70 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years???? Warranty Terms

Alphacool's Core 140mm is a quiet and efficient fan with a wide control range up to 2500 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 140mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 115.56 CFM combined with a high static pressure of 3.96 mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)140 x 140 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing TypeTwo Ball BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.4 (Max: 0.5) ARated Power4.8 (Max: 6.00) WRated Speed0 - 2500 rpm ±10%Max. Air Flow115.56 CFMMax. Static Pressure3.96 mm/H2ONoise level43.3 (Max: 45.0) dBALife Expectance70000 h at 40 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+70 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years???? Warranty Terms

Alphacool's Core 140mm is a quiet and efficient fan with a wide control range up to 3200 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 140mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 3200 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 153.9 CFM combined with a high static pressure of 6.99 mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)140 x 140 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing TypeTwo Ball BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.66 (Max: 0.75) ARated Power7.92 (Max: 9.00) WRated Speed0 - 3200 rpm ±10%Max. Air Flow153.9 CFMMax. Static Pressure6.99 mm/H2ONoise level51.0 (Max: 53.0) dBALife Expectance70000 h at 40 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+70 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years???? Warranty Terms

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel.Aluminium RadiatorCompared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU.Core fanThe fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system.Cooler & PumpAs with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored.Hoses & ConnectionsThe FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case.Illumination12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.Thermal compoundThe thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility:AMD: AM4 / AM5Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2066 Technical data radiatorL x W x H153 x 120 x 38mmMaterial cooling fins, channels & prechamber3003 AluminiumMaterial outer housing & threads3003 AluminiumFins per Inch19Fan size120mmFan slots1 one-sided / 2 double-sidedColorblackTechnical data fansL x W x H120 x 120 x 25mmBearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.23 (Max. 0.4) ARated Power2.76 (Max. 4.8) WRated Speed0 - 2500rpm/min (±10%)Max. Air Flow62.8CFMMax.Static Pressure2.13mm-H2ONoise level (rated voltage, mute room, distance 1m)33.0 (Max. 34.3) dBAMTBF50000hrs at 25°CSpeed Control ModePWMConnection & control4-pin PWM (cable 40cm)Auto-RestartyesTachometer OutputyesColorblackTechnical data cooler & pumpL x W x H70,2 x 70,2 x 46mmMaterial cooler bottomcopperMaterial pump housingSynthetic material (ABS+PC)Fin structure cooler bottom0,1 x 0,1mmMaterial pump bearing & shaftceramicsStarting voltage> DC 6VRated power7.1WNoise level35DbRated Current0.59A (±10% MAX)Speed2500~3500 (±10% RPM)Power supply Digital aRGB3-pin 5V (male & female, cable length 30cm)Number of aRGB LEDs12Power supply pump4-Pin JST (Kabellänge 30cm)Technical data tubesMaterialFEP, black with weave coverLength350mmWarranty: 3 years???? Warranty Terms

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel.Aluminium RadiatorCompared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU.Core fanThe fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system.Cooler & PumpAs with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored.Hoses & ConnectionsThe FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case.Illumination12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.Thermal compoundThe thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility:AMD: AM4 / AM5Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2066 Technical data radiatorL x W x H279 x 120 x 38mmMaterial cooling fins, channels & prechamber3003 AluminiumMaterial outer housing & threads3003 AluminiumFins per Inch19Fan size120mmFan slots2 one-sided / 4 double-sidedColorblackTechnical data fansL x W x H120 x 120 x 25mmBearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.23 (Max. 0.4) ARated Power2.76 (Max. 4.8) WRated Speed0 - 2500rpm/min (±10%)Max. Air Flow62.8CFMMax.Static Pressure2.13mm-H2ONoise level (rated voltage, mute room, distance 1m)33.0 (Max. 34.3) dBAMTBF50000hrs at 25°CSpeed Control ModePWMConnection & control4-pin PWM (cable 40cm)Auto-RestartyesTachometer OutputyesColorblackTechnical data cooler & pumpL x W x H70,2 x 70,2 x 46mmMaterial cooler bottomcopperMaterial pump housingSynthetic material (ABS+PC)Fin structure cooler bottom0,1 x 0,1mmMaterial pump bearing & shaftceramicsStarting voltage> DC 6VRated power7.1WNoise level35DbRated Current0.59A (±10% MAX)Speed2500~3500 (±10% RPM)Power supply Digital aRGB3-pin 5V (male & female, cable length 30cm)Number of aRGB LEDs12Power supply pump4-Pin JST (Kabellänge 30cm)Technical data tubesMaterialFEP, black with weave coverLength400mmWarranty: 3 years???? Warranty Terms

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 315 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel.Aluminium RadiatorCompared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU.Core fanThe fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system.Cooler & PumpAs with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored.Hoses & ConnectionsThe FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case.Illumination12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.Thermal compoundThe thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility:AMD: AM4 / AM5Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2066 Technical data radiatorL x W x H460 x 140 x 38mmMaterial cooling fins, channels & prechamber3003 AluminiumMaterial outer housing & threads3003 AluminiumFins per Inch20Fan size140mmFan slots3 one-sided / 6 double-sidedColorblackTechnical data fansL x W x H140 x 140 x 25mmBearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.26 (Max. 0.3) ARated Power3.12 (Max. 3.6) WRated Speed0 - 2000rpm/min (±10%)Max. Air Flow92.3CFMMax.Static Pressure2.53mm-H2ONoise level (rated voltage, mute room, distance 1m)34.3 (Max. 36) dBAMTBF50000hrs at 25°CSpeed Control ModePWMConnection & control4-pin PWM (cable 40cm)Auto-RestartyesTachometer OutputyesColorblackTechnical data cooler & pumpL x W x H70,2 x 70,2 x 46mmMaterial cooler bottomcopperMaterial pump housingSynthetic material (ABS+PC)Fin structure cooler bottom0,1 x 0,1mmMaterial pump bearing & shaftceramicsStarting voltage> DC 6VRated power7.1WNoise level35DbRated Current0.59A (±10% MAX)Speed2500~3500 (±10% RPM)Power supply Digital aRGB3-pin 5V (male & female, cable length 30cm)Number of aRGB LEDs12Power supply pump4-Pin JST (Kabellänge 30cm)Technical data tubesMaterialFEP, black with weave coverLength400mmWarranty: 3 years???? Warranty Terms

The Alphacool Eisbaer Aurora AIO CPU water cooler is a latest development of the popular and well-known Eisbaer cooler. Alphacool has improved many features but the ability to expand the cooler via the quick release fasteners and the famous high-quality copper radiators have been retained. The large capacity reservoir and the ability to refill the cooler has also been kept the same.The Heart of the AiOThe pump, CPU cooler and reservoir combo is the heart of the Eisbaer Aurora. The cooler base is made of high-quality copper and has a fine slotted structure. The surface area has been further expanded compared to the previous model to completely cover the larger DIE areas of AMD and Intel processors. The DC-LT pump has also been redesigned and is now almost 10% more powerful at a reduced noise level. The reservoir is many times larger compared to standard AIO systems ensuring a longer service life. In addition, the unit also has a fill port which can be used to refill if necessary. This is especially important if you want to extend the loop via the quick release fasteners.Custom Cooling Components!A great advantage of the Eisbaer Aurora series is the expandability via the aptly named ‘Eisbaer-Ready’ quick release fasteners. These have also been redesigned and are now smoother and more unobtrusive than those of the previous model. Nevertheless, these quick-release fasteners are 100% compatible with all Eisbaer Ready products such as prefilled radiators, the Eiswolf AIO water cooler for graphics cards and the well-known Alphacool HF quick-release fasteners, which are available separately for normal DIY water cooling systems. The fittings are from the Enterprise Solution series from Alphacool. They have a standard G1/4" thread and can be exchanged for any other fittings if you wish. The TPV hose is extremely resistant and is also used in the Enterprise Solution series for servers and workstations. Using custom cooling parts for an AiO means you get many more options than usual.Copper RadiatorAs usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water-carrying components such as the end chambers, the cooling fins and the cooling channels to which the fins are soldered. Only the thread inserts are made of brass as copper is too soft for this application. The cooling fins are also only lightly painted. If you look closely, the copper even shimmers through. The reason for this is to ensure that the paint does not affect the cooling capacity, which would be reduced by too thick a coating. The fin density is at an optimal 15FPI, allowing the radiator to work perfectly at low airflow. A too high density would require faster, louder fans. Alphacool has chosen the golden number here as you can keep fans running slower and quieter whilst still getting fantastic performance.Fans and LightingThe entire Eisbaer Aurora cooler has been equipped with addressable digital RGB LEDs. The pump housing has an Eisbaer pattern all around which is fully illuminated. This gives a unique look when installed into a case. The Alphacool Aurora LUX Pro fans are also fully illuminated with 5V aRGB LEDs. The fan frame has a unique pattern with many small cut-outs that create a particularly elegant effect. You do not see individual LEDs and the lighting is much more interesting than a simple LED ring. Of course, all Digital RGB LEDs can be controlled as you like, such as via the motherboard or with a third-party controller. Depending on the controller almost all effects are possible.How to Connect EverythingThe fans are controlled via a 4-pin PWM connector. To reduce the number of headers needed on the motherboard, Y-cable is included so that 2 or 3 fans can be ran from a single header. The RGB lighting is connected via a 3-pin JST connector. Each cable also has an integrated Y-adapter, so that the fans can be daisy chained very easily. A 3-pin 5V adapter is included in the package. This allows you to connect and control the fans to any mainboard with the appropriate connector. Alternatively, the included Digital RGB Controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Aurora CPU AIO water cooling is a worthy successor of the well-known Eisbaer series and improves many details of the water cooling. Compatibility:AMD: AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / FM1 / FM2 / FM2+ / sTRX4 / TR4Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical data radiatorL x W x H313,5 x 144 x 30 mmMaterialfull copperThreads2x G1/4”Max working temperature60 °CPressure tested0,8 BarTechnical data pump housingL x W x H66 x 66 x 69 mmMaterial reservoirtransparent nylonThreads2x G1/4”Connection Digital aRGB3-Pin JST + 3-Pin 5VQuantity Digital aRGB LED10Technical data pumpSpeed2600 RPMVoltage6-13.5V DCPower consumption:3,2WMaximum flow rate72 L/hMaximum head1 mTechnical data fansSpeed600 - 1500 RPMStatic pressure0,41 - 1,6 mm H2OAir flow rate27 - 71 m³/hBearingshydraulicFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5V

The Alphacool Eisbaer Aurora AIO CPU water cooler is an evolution of the popular and well-known Eisbaer cooler. Alphacool has improved many details while keeping certain standards. Above all, the expandability via quick connectors and the high-quality copper radiators remain core features. The large reservoir and the ability to refill the system are two more beloved features that have been retained. The heart is the cooler with its pump The cooler base is made of copper and features a fine slot structure. The surface has been enlarged compared to the previous model to fully cover the larger die areas of AMD and Intel processors. The DC-LT pump has also been redesigned and is now approximately 10% more powerful while operating even more quietly. The reservoir is many times larger than those found in conventional AIO systems, which ensures longer lifespan. In addition, the cooler unit features a fill port, allowing liquid to be added if necessary—especially useful when expanding the loop via quick connectors. DIY components wherever you look A major advantage of the Eisbaer Aurora series is its expandability through so-called Eisbaer-Ready quick connectors. These have also been redesigned to appear smoother and more discreet than those on the previous model. Despite the new design, they remain 100% compatible with all Eisbaer Ready products, such as pre-filled radiators, the Eiswolf AIO GPU water cooler, and the well-known Alphacool HF quick connectors available separately for standard DIY loops. The fittings come from Alphacool’s Enterprise Solution series and use a standard G1/4" thread, allowing them to be swapped for any other compatible fitting. The TPV tubing is extremely durable and also used in the Enterprise Solution range for servers and workstations. Copper radiator As is typical for Alphacool, the radiators are made entirely of copper. Alphacool was the first manufacturer worldwide to consistently use copper in all water-carrying components—such as end chambers, cooling fins, and the soldered cooling channels. Only the connection threads are made of brass for technical hardening reasons. The cooling fins are only lightly coated, allowing the copper to subtly shine through when viewed closely. This is to avoid a thick layer of paint that could reduce cooling performance. The fin density is an optimal 15 FPI, allowing the radiator to work perfectly even with low airflow. A higher density would require faster fans, while a lower density wouldn’t benefit from higher fan speeds. Alphacool has found the perfect balance here. Fans and lighting The entire Eisbaer Aurora cooler is equipped with addressable digital RGB LEDs. The pump housing features a fully illuminated Eisbaer pattern all around, making it a true eye-catcher inside your case. The Alphacool Rise Aurora 120 mm fans are also fully lit with 5V aRGB LEDs. The fan frame has a unique pattern with many small cut-outs, creating a particularly elegant lighting effect. No individual LEDs are visible, and the lighting is far more impressive than a simple LED ring. Of course, all digital RGB LEDs can be controlled individually, and depending on the controller, nearly all lighting effects are possible. How everything connects The fans are controlled via a standard 4-pin PWM connector. To avoid connecting each fan individually to the motherboard, a matching Y-cable is included. The RGB lighting uses a 3-pin JST connector. Each cable also has a built-in Y-adapter, allowing the fans to be easily daisy-chained. A 3-pin 5V adapter is also included, so you can connect the fans to any compatible motherboard and control the lighting. Alternatively, the included digital RGB controller can be used. The Eisbaer Aurora pump uses a 3-pin Molex connector, which can also be connected directly to the motherboard. The Eisbaer Aurora CPU AIO water cooler is a worthy successor to the well-known Eisbaer line, improving on many of the details that matter in water cooling. Compatibility: AMD: AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / FM1 / FM2 / FM2+ / sTRX4 / TR4 Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical data radiator L x W x H: 397 x 124 x 30 mm Material: full copper Threads: 2x G1/4” Max working temperature: 60 °C Pressure tested: 0.8 Bar Technical data pump housing L x W x H: 66 x 66 x 69 mm Material reservoir: transparent nylon Threads: 2x G1/4” Connection Digital aRGB: 3-Pin JST + 3-Pin 5V Quantity Digital aRGB LED: 10 Technical data pump Speed: 2600 RPM Voltage: 6-13.5V DC Power consumption: 3.2 W Maximum flow rate: 72 L/h Maximum head: 1 m Technical data fans Speed: 0 - 2500 RPM (+/- 10%) Static pressure: 3.17 mm H2O Air flow rate: 118.9 m³/h Volume max: max. 31.5 dB(A) Fan connector: 4-Pin PWM Connection Digital aRGB: 3-Pin JST + 3-Pin 5V

The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket.Large cooling surfaceThe cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible.Copper radiatorAs per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen.Real water coolingThe Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system.Fan and lightingThe entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. Inaddition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of courseall Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible.How to connect everythingThe fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 3647 / LGA 4189 (optional) / LGA 4677 (optional) Technical data radiatorL x W x H279 x 124 x 30 mm (+/- 3% in the range of the pre-chambers)Material cooling finscopperMaterial chamberscopperMaterial cooling channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"For fan size120 mmFan mounting options2 x one-sided / 4 x both-sidedTechnical data cooler and pumpL x W x H64 x 79 x 54,3 mmMaterial cooler bottomNickel plated copperMaterial cooler topPMMAThreads2 x G1/4“ (+ 1x Fillport G1/4“)Pump typDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WMTBF50.000 hNumber of aRGB Digital LED10Technical data tubeLength40 cmMaterial tubeTPV (EPDM/PP)Colorblack mattTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings4xFor tube size12,7 / 7,6 mmMaterial fittingsnylonTechnical data quick fastenersL x D95 x 27 mmMaterialnylonFor tube size12,7 / 7,6 mmColorblackTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm/H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMNumber of aRGB Digital LEDFrame: 12 / Hub: 8Connection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25 mmMax working temperature60 °CWarranty: 3 years???? Warranty Terms

The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket.Large cooling surfaceThe cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible.Copper radiatorAs per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen.Real water coolingThe Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system.Fan and lightingThe entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 140mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 2.20 mm/H2O and offers a max. air flow of 154.1 m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible.How to connect everythingThe fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 3647 / LGA 4189 (optional) / LGA 4677 (optional) Technical data radiatorL x W x H316 x 144 x 30 mm (+/- 3% in the range of the pre-chambers)Material cooling finscopperMaterial chamberscopperMaterial cooling channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"For fan size140 mmFan mounting options2 x one-sided / 4 x both-sidedTechnical data cooler and pumpL x W x H64 x 79 x 54,3 mmMaterial cooler bottomNickel plated copperMaterial cooler topPMMAThreads2 x G1/4“ (+ 1x Fillport G1/4“)Pump typDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WMTBF50.000 hNumber of aRGB Digital LED10Technical data tubeLength40 cmMaterial tubeTPV (EPDM/PP)Colorblack mattTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings4xFor tube size12,7 / 7,6 mmMaterial fittingsnylonTechnical data quick fastenersL x D95 x 27 mmMaterialnylonFor tube size12,7 / 7,6 mmColorblackTechnical data fanSpeed0 - 2000 RPMStatic pressure2,20 mm H2OAir flow rate154,1 m³/hBearingsSleeve bearingFan connector4-Pin PWMNumber of aRGB Digital LEDFrame: 16 / Hub: 8Connection Digital aRGB3-Pin JST + 3-Pin 5VDimensions140 x 140 x 25 mmMax working temperature60 °CWarranty: 3 years???? Warranty Terms

The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket.Large cooling surfaceThe cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible.Copper radiatorAs per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen.Real water coolingThe Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system.Fan and lightingThe entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. Inaddition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of courseall Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible.How to connect everythingThe fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 3647 / LGA 4189 (optional) / LGA 4677 (optional) Technical data radiatorL x W x H390 x 120 x 30 mm (+/- 3% in the range of the pre-chambers)Material cooling finscopperMaterial chamberscopperMaterial cooling channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"For fan size120 mmFan mounting options3 x one-sided / 6 x both-sidedTechnical data cooler and pumpL x W x H64 x 79 x 54,3 mmMaterial cooler bottomNickel plated copperMaterial cooler topPMMAThreads2 x G1/4“ (+ 1x Fillport G1/4“)Pump typDC-LT 2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WMTBF50.000 hNumber of aRGB Digital LED10Technical data tubeLength40 cmMaterial tubeTPV (EPDM/PP)Colorblack mattTube size12,7 / 7,6 mmHardness grade35 Shore-A to 50 Shore-DWorking temperature-50 to +155 °CTechnical data fittingsL x D straight fitting24 x 18 mmQuantity straight fittings4xFor tube size12,7 / 7,6 mmMaterial fittingsnylonTechnical data quick fastenersL x D95 x 27 mmMaterialnylonFor tube size12,7 / 7,6 mmColorblackTechnical data fanSpeed0 - 2500 RPMStatic pressure3,17 mm/H2OAir flow rate119,8 m³/hBearingsSleeve bearingFan connector4-Pin PWMNumber of aRGB Digital LEDFrame: 12 / Hub: 8Connection Digital aRGB3-Pin JST + 3-Pin 5VDimensions120 x 120 x 25 mmMax working temperature60 °CWarranty: 3 years???? Warranty Terms

You may have already seen the Alphacool Eiszyklon Aurora LUX Pro fan on the Alphacool Eisbaer Aurora series. It offers a wide control range as well as outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects.Ingenious LightingThe frame is equipped with digital addressable 5V RGB LEDs which illuminate the whole frame. The frame is not completely transparent, but the illumination is done through narrow slits in four places. On the upper side there are two rows of these slits. Each narrow frame runs along the inside and outside of the frame. This creates a unique illumination which looks very noble. Thanks to the recessed light diffusers the light is distributed evenly. This means that Individual LEDs are no longer visible.Wide Control Range and SilentThe fan can be controlled from 600 to 1500 rpm via the 4-pin PWM connector. At 600 rpm the fan is almost silent, but still offers a good airflow rate as well as a high static pressure. Therefore, the fan can also be used very well on radiators for a water cooling system. Thanks to the high airflow, the fan is also ideal for ventilating a case. Decouplers are also found directly on the frame. The soft foam padding reduces the transmission of vibrations to the case. A further plus point for the silent capability of the fan.Connections?The fan is controlled via a 4-pin PWM connector. The cable is 50 cm long. This allows the fan to be connected to the mainboard or a special controller without any additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector. Technical dataSpeed600-1500 RPMStatic pressure1,6 mm/H2OAir flow rate71 m³/hBearingsHydraulicFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VQuantity Digital aRGB LED16Dimensions140 x 140 x 25 mmNet weight180 gMax working temperature60 °CPower consumption2 WNoise12-38 dB(A)MTBF50.000hWarranty: 3 years???? Warranty Terms

The Alphacool Eiszyklon Aurora LUX fan offers extensive RGB lighting whilst operating efficiently and quietly. With a wide control range up to a maximum of 1500 rpm it can be operated from powerful to pleasantly quiet. The frame of the fan is naturally decoupled, which further underlines the silent capability.Addressable Digital RGB LightingStandard RGB has come and gone, the future lies in addressable digital RGB LEDs that can be controlled individually. Therefore, the Eiszyklon Aurora LUX fan uses digital aRGB LEDs. To illuminate the frame of the fan optimally, a diffuser is used. The milky white fan frame scatters the light over the entire fan frame and provides a perfect and extensive illumination of the entire fan. Since each LED can be controlled individually, all known effects are possible. These include effects such as wave, pulse, breathing and much more. Flow Optimized Fan BladesThe fan blades have been specially adapted for use on radiators. The most important point is a high static pressure. In order to achieve this even at low speeds, the fan blades are slightly bent. They act like a blade which pulls the air inwards and presses it downwards with overpressure. The 9 closely spaced fan blades also ensure a continuously high static pressure even at low speeds, perfect for use with a radiator. Of course, the Eiszyklon Aurora LUX fan is also suitable as a case fan. Connections?The fan is controlled via a 4-pin PWM connector. The cable is 44 cm long. This allows the fan to be connected to the mainboard or a special controller without any additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector. Technical Data: Size: 140 x 140 x 25 mm Speed: 1500 U/min Static pressure: 1,93 mm H2O Air flow rate: 118,93 m³/h Bearing: Hydraulisch Fan / RGB Connector: 4-Pin PWM, 3-Pin JST Lighting: Digital adressierbare 5V RGB LEDs Weight: 180 g Download Datenblatt PDF: Alphacool Eiszyklon Aurora LUX Digital RGB (140x140x25mm

The Alphacool Rise fan offers a wide range of control as well as superior Digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design can create some unique effects whilst offering performance. Brilliant illumination There are 20 digitally addressable 5V RGB LEDs built into the frame and hub that illuminate the entire fan. This creates a unique illumination that looks very impressive. Thanks to the recessed light diffusers, the light is distributed evenly, and you will not see sporadic uneven lighting. Wide control range and silent The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. In addition, it offers a silent mode, with which the fan can be regulated down to 0 rpm and then they will only start when they are needed above 350rpm. At 800 rpm, the fan is nearly silent, but still offers a good airflow (118.9m3/h) paired with a high static pressure (3.17mm/H2O). This makes the fan perfect for mounting on radiators of a water cooling system or for alternatively, as a case fan. Decouplers are located directly on the corners of the frame. The soft foam pads reduce the transmission of vibrations to the case, which in turn reduces noise. Tear-off edges on the fan blades also provide a significant reduction in noise. Connectors? The fan is controlled via a 4-pin PWM connector. The cable is 40 cm long. This allows the fan to be connected to the motherboard or a fan controller without the need for additional adapter cables or extensions. The digital aRGB LED illumination is controlled via a JST 3-pin connector and adapters are available to change this into a standard 3 pin aRGB connector if required. Note: The cable for connecting the ARGB LEDs is not included in the scope of delivery, but is optionally available in the shop! (Art. 18604, Alphacool connection cable 3pin to 3pin Digital RGB) Technical Data fan L x W x H 120 x 120 x 25 mm Speed 0—2500 rpm (+/-10%) Bearing Sleeve Bearing Connection 4-Pin PWM Cable length 40 cm Voltage 12V DC Current consumption. 0,65A (0,72 max) Static pressure 3,17 H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) MTBF 50.000h Speedometer signal Yes Auto-Restart Yes Technical data digital RGB LED type 5V aRGB Connection 3-Pin JST Cable length 50cm (Splitter after 40cm) Max. current consumption LEDs 3,5W LED quantity Frame: 12 / Hub: 8 Download Data sheet PDF: Alphacool Rise Aurora 120 mm fan (120x120x25mm)

The Alphacool Rise Aurora fan offers a wide range of control as well as superior Digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design can create some unique effects whilst offering performance.Brilliant illuminationThere are 20 digitally addressable 5V RGB LEDs built into the frame and hub that illuminate the entire fan. This creates a unique illumination that looks very impressive. Thanks to the recessed light diffusers, the light is distributed evenly, and you will not see sporadic uneven lighting.Wide control range and silentThe fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. In addition, it offers a silent mode, with which the fan can be regulated down to 0 rpm and then they will only start when they are needed above 350rpm. At 800 rpm, the fan is almost silent. At 2500 rpm, it offers an air flow rate of 118.9m3/h coupled with a high static pressure of 3.17mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for alternatively, as a case fan. Decouplers are located directly on the corners of the frame. The soft foam pads reduce the transmission of vibrations to the case, which in turn reduces noise. Tear-off edges on the fan blades also provide a significant reduction in noise.Connectors?The fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected to the motherboard or a fan controller without the need for additional adapter cables or extensions. The digital aRGB LED illumination is controlled via a JST 3-pin connector and adapters are available to change this into a standard 3 pin aRGB connector if required. Technical data fanL x W x H120 x 120 x 25mmRPM0-2500 rpm (+/-10%)BearingSleeve BearingConnection4-Pin PWMLength PWM cable40cmVoltage12V DCPower consumption8,64 (max)Current consumption0,65A (0.72A max)Static pressure3,17 mm/H2OMax. air flow118,9 m³/hNoisemax. 31,5 dB(A)MTBF30,000hSpeedometer signalyesAuto-RestartyesWeight177gColorwhiteTechnical data aRGB illuminationLED type5V aRGBConnection3-Pin JSTCable length50cm (Splitter after 40cm)Max. current consumption LEDs3,5WLED quantityFrame: 12 / Hub: 8Warranty: 3 years???? Warranty Terms

The Alphacool Rise fan offers a wide range of control as well as superior Digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design can create some unique effects whilst offering performance. Brilliant illuminationThere are 24 digitally addressable 5V RGB LEDs built into the frame and hub that illuminate the entire fan. This creates a unique illumination that looks very impressive. Thanks to the recessed light diffusers, the light is distributed evenly, and you will not see sporadic uneven lighting. Wide control range and silentThe fan can be controlled from 0 to 2000 rpm via the 4-pin PWM connector. In addition, it offers a silent mode, with which the fan can be regulated down to 0 rpm and then they will only start when they are needed above 600rpm. At 800 rpm, the fan is almost silent. At 2000 rpm, it offers an air flow rate of 154.1m3/h coupled with a high static pressure of 2.20mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for alternatively, as a case fan. Decouplers are located directly on the corners of the frame. The soft foam pads reduce the transmission of vibrations to the case, which in turn reduces noise. Tear-off edges on the fan blades also provide a significant reduction in noise. Connectors?The fan is controlled via a 4-pin PWM connector. The cable is 40 cm long. This allows the fan to be connected to the motherboard or a fan controller without the need for additional adapter cables or extensions. The digital aRGB LED illumination is controlled via a JST 3-pin connector and adapters are available to change this into a standard 3 pin aRGB connector if required. Technical data fan L x W x H 140 x 140 x 25 mm Speed 0—2000 rpm (+/-10%) Bearing Sleeve Bearing Connection 4-Pin PWM Cable length 40 cm Voltage 12V DC Power consumption 6,6W (max) Current consumption 0,50A (0,55 max) Static pressure 2,20 H2O Max. air flow 154,1 m³/h Noise max. 38,4 dB(A) MTBF 30.000h Speedometer signal Yes Auto-Restart Yes Technical data aRGB LED type 5V aRGB Connection 3-Pin JST Cable length 50 cm (Splitter after 40 cm) Max. current consumption LEDs 3,5W LED quantity Frame: 16 / Hub: 8 Downloads:Datasheet PDF

The Alphacool Rise Aurora fan offers a wide range of control as well as superior Digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design can create some unique effects whilst offering performance.Brilliant illuminationThere are 24 digitally addressable 5V RGB LEDs built into the frame and hub that illuminate the entire fan. This creates a unique illumination that looks very impressive. Thanks to the recessed light diffusers, the light is distributed evenly, and you will not see sporadic uneven lighting.Wide control range and silentThe fan can be controlled from 0 to 2000 rpm via the 4-pin PWM connector. In addition, it offers a silent mode, with which the fan can be regulated down to 0 rpm and then they will only start when they are needed above 600rpm. At 800 rpm, the fan is almost silent. At 2000 rpm, it offers an air flow rate of 154.1m3/h coupled with a high static pressure of 2.20mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for alternatively, as a case fan. Decouplers are located directly on the corners of the frame. The soft foam pads reduce the transmission of vibrations to the case, which in turn reduces noise. Tear-off edges on the fan blades also provide a significant reduction in noise.Connectors?The fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected to the motherboard or a fan controller without the need for additional adapter cables or extensions. The digital aRGB LED illumination is controlled via a JST 3-pin connector and adapters are available to change this into a standard 3 pin aRGB connector if required. Technical data fanL x W x H140 x 140 x 25mmRPM0-2000 rpm (+/-10%)BearingSleeve BearingConnection4-Pin PWMLength PWM cable40cmVoltage12V DCPower consumption6,6 Watt (max)Current consumption0,50A (0.55A max)Static pressure2,20 mm/H2OMax. air flow154,1 m³/hNoisemax. 38,4 dB(A)MTBF30,000hSpeedometer signalyesAuto-RestartyesWeight206gColorwhiteTechnical data aRGB illuminationLED type5V aRGBConnection3-Pin JSTCable length50cm (Splitter after 40cm)Max. current consumption LEDs3,5WLED quantityFrame: 16 / Hub: 8Warranty: 3 years???? Warranty Terms

AXAGON CLR-M2FAN copper heatsink with fan for perfect cooling of high performance M.2 SSD disks, especially NVMe. The universal heatsink can be used for M.2 cards with size 22 x 80 mm. Supplied thermally conductive pads allow heatsink installation for all single-sided as well as double-sided M.2 SSD disks. Ribbed copper heatsink core with aluminum body is 8.6 mm high. Inside the body, there is a fan with PWM speed control, which is connected to the computer's motherboard with a 4-pin power connector. The fan speed can be automatically controlled by temperature, to save energy or to reduce noise. Copper heatsink with fan together with metal bracket assists in optimal dissipation of heat generated during the M.2 SSD operation. It also reduces the drive temperature by up to 30°C. This prolongs the M.2 SSD life and prevents disk slow down, so-called "Thermal Throttling". The heatsink can be used not only with M.2 AXAGON adapters, but also with M.2 (NGFF) slots on motherboards, etc. Thanks to the metal frame, the heatsink dissipates heat from both sides of the M.2 disk and thus achieves maximum cooling efficiency. Features: Support of M.2 drives of any capacity. Support of both single-sided and double-sided M.2 drives. Support of M.2 drives, size 22 x 80 mm. Support of SATA (AHCI) as well as NVMe (PCI-Express) M.2 drives. Ribbed copper heatsink core, aluminum body. Fan with PWM speed control, 4-pin power connector. 3 pcs thermally conductive pads can be deliberately combined and used for both single-sided and double-sided SSD disks with different height. Compact dimensions 76 x 24 x 12 mm. Weight 45 g. Package contains: Heatsink with fan and fixed 38 cm long power cable, metal bracket, 3 pcs thermally conductive pads, mounting material and screwdriver, packed in a cardboard box. Review - https://www.hwcooling.net/en/axagon-clr-m2fan-active-ssd-cooler-for-closed-off-spaces-review/

<p>CORSAIR <b>NAUTILUS RS Liquid</b> CPU Cooler prezentuje doskonałość CORSAIR w inżynierii i projektowaniu, oferując wydajne, ciche chłodzenie z prostą łącznością nie jest wymagany żaden kontroler, wystarczy podłączyć bezpośrednio do płyty głównej. Jego lekko wypukła płyta chłodząca z wstępnie nałożoną pastą termoprzewodzącą zapewnia doskonały transfer ciepła, podczas gdy wentylatory RS120 utrzymują niskie temperatury dla maksymalnej wydajności procesora. Uprość swoją konstrukcję dzięki łatwym, szeregowym połączeniom i precyzyjnej kontroli chłodzenia za pomocą 4-pinowego złącza wentylatora PWM. Aby uzyskać bardziej zaawansowaną kontrolę, można użyć opcjonalnego kontrolera iCUE i kabla adaptera (sprzedawanego oddzielnie). Obsługując szeroką gamę gniazd procesorów Intel i AMD, w tym LGA 1851, NAUTILUS RS oferuje szeroką kompatybilność systemową.</p>

Gebildet 2 x Sata kuni 4-suunalise 3-kontaktilise / 4-kontaktilise Pmw 12v Pc korpuse ventilaatori toiteadapteri kaabel 3-kontaktiline või 4-kontaktiline (pwm pistik) kuni 15-kontaktilise Sata arvuti jahutusventilaatori toitekaablini

Gebildet 4 tk Sata kuni 3-pin / 4-pin Pmw 12v Pc korpuse ventilaatori toiteadapteri kaabel, 3-pin või 4-pin (pwm pistik) kuni 15-pin Sata arvuti jahutusventilaatori toitekaabel

Gebildet 50 cm usb kuni 3-kontaktilise / 4-kontaktilise pwm 5 v usb ventilaatori toitekaabel, usb kuni 3-kontaktilise / 4-kontaktilise korpuse ventilaatori adapteri ühenduskaabel (usb 3-kontaktiline / 4-kontaktiline kaabel)

Gebildet 6 tk usb kuni 3-pin/4-pin pwm 5v usb ventilaatori toitekaabel, usb kuni 3-pin/4-pin korpuse ventilaatori adapteri ühenduskaabel (usb 3-pin/4-pin kaabel)

Gebildet sata 3-suunalise 3-kontaktilise / 4-kontaktilise pmw 12v pc korpuse ventilaatori toiteadapteri kaabel 3-kontaktiline või 4-kontaktiline (pwm pistik) kuni 15-kontaktilise sata arvuti jahuti ventilaatori toitekaablini, 2 tk pakis

Kuoqiy 2 tükki 30 cm usb-st 4-kontaktilisele molex pwm 5 v ümbrisega ventilaatori kaabel lülitiga, usb-st 4-kontaktilisele molex korpuse ventilaatori adapteri ühenduskaabel sisse/välja lülitiga, usb 4-kontaktiline molex kaabel

Kuoqiy 5 tk 30 cm Usb kuni 3 kontaktiga / 4 kontaktiga Pwm 5 V ümbrisega ventilaatori kaabel, Usb kuni 3 kontaktiga / 4 kontaktiga korpuse ventilaatori adapteri ühenduskaabel, Usb 3 kontaktiga / 4 kontaktiga kaabel

Neewer MS150B Bi Color 130W 2700-6500K LED Lamp.The 130W Neewer MS150B LED lamp provides bi-color continuous illumination and allows you to adjust the color temperature from 2700K to 6500K. It also guarantees a maximum brightness of 200,000 lux at a distance of 0.5 meters. In doing so, it offers 12 special effects and high CRI97+ and TLCI98+ ratings for vivid colors and realistic scenes. The lighting is balanced - forget the flicker problem!Dimming technology and cooling systemThe MS150B uses PWM technology to adjust brightness from 0 to 100% with 1% accuracy. This makes it possible to precisely adjust the brightness level even in dimly lit conditions. The lamp features 4 smart heat dissipation modes - smart, high speed, low speed and OFF, ensuring cooling without affecting performance.Control via app and 2.4GThanks to NEEWER Infinity technology, the MS150B can be controlled via a mobile app, offering control over hundreds of lamps and the ability to update firmware via OTA. The 2.4G connection allows group control of lamps within a radius of up to 15m using 00-99 channels via remote control. There are also knobs and buttons to adjust the lights.Various power sourcesThe Neewer unit can be powered by 2 rechargeable batteries (NP-F750/NP-F970), a V-mount (14.4V), and a D-Tap cable for field use. The power adapter allows you to plug into a power outlet for maximum lighting performance. Note: batteries and D-Tap cable are not part of the kit.Bowens mount for light modificationWith the NEEWER mount with umbrella holder, you can connect softboxes, photo umbrellas and various light modifiers. The included Bowens mount adapter further expands compatibility with accessories.Additional amenitiesThe lamp is made of durable aluminum alloy, and with a removable handle that swivels 180°, you can easily store it. The unit weighs just 0.98 kg - you don't have to worry about it being an unnecessary burden. In addition, the LCD screen allows you to conveniently check the current settings.Included:NEEWER MS150B LED lampNEEWER standard reflectorBowens mount adapterUmbrella holderPower adapter ManufacturerNeewerModelMS150BPower130WColor temperature2700K-6500KBrightnessMaximum 200000 lux at 0.5 mCRI97+TLCI index98+Special effects12Weight980 gDimensions19.5 x 9.5 x 8 cmPower supplyNP-F750/NP-F970 batteries, V-mount battery, D-Tap cableControlMobile app, 2.4G connection

Neewer MS150C RGB 150W 2700-6500K LED lamp.The Neewer MS150C LED lamp will meet the needs of filmmakers, photographers and content creators. The device combines RGBWW light mixing technology with precise PWM dimming for accurate color reproduction. With a light output of 150 watts and a variety of modes, the product will prove reliable for both studio and outdoor work. In addition, the LCD display allows for convenient adjustment of settings.Advanced light mixing technologyThe Neewer MS150C uses RGBWW technology, offering color temperatures ranging from 2700K to 6500K. As a result, it emits multiple colors and reproduces them realistically, as evidenced by its CRI97+/TLCI98+ rating. PWM dimming provides precise brightness adjustment from 1% to 100%, allowing you to fine tune your lighting.Compact design for filmingThe unit is lightweight and compact - it weighs 1,041 grams and measures 195 x 95 x 92 mm, making it effortless to transport. The 180° adjustable mount and aluminum housing make the MS150C perfect for outdoor use, and the included Bowens adapter allows you to connect a variety of light modifiers.Realistic special effectsThe unit offers 6 operating modes, including CCT, which provides a color temperature range of 2700K-6500K and GM color correction of -50/+50, and HSI, which allows for 0-100% color saturation and 360° color angle adjustment. RGBCW is also available, allowing individual adjustment of red, green, blue, cool and warm white hues. In addition, FX offers 17 special scenes, SOURCE allows you to collect and use colors, and GEL provides 40 color gel presets.Various control methodsYou can control the lamp in 3 ways - using the buttons and knobs on the housing, through the NEEWER APP with Infinity technology, allowing you to control hundreds of lamps, and through the 2.4G system, allowing you to control lamps of various models, including the Neewer SL90, RGB1, CB60RGB, RGB1200, PL60C, MS150B, BH30S and FS150B at a distance of up to 15 meters. The choice is yours!Reliable power supplyThe lamp can be powered directly from an outlet, as well as with a V mount battery (16.8V) and a D-Tap cable, providing convenient power in the field. However, it is worth remembering that when using a rechargeable battery, the unit's power drops to 95 watts and cannot be charged while in use.3 heat dissipation modesYou don't have to worry about potentially overheating the lamp. The 3 heat dissipation modes of Intelligent, High Speed and Low Speed effectively keep the temperature at an optimal level.Included:ReflectorBowens adapterPower cordPower supplyProtective coverSoftbox LanternStandard ReflectorSoftboxSnootUmbrellaBag ManufacturerNeewerModelB0CTZL5TGLLighting technologyRGBWWColor temperature range2700K - 6500KLuminous flux150 WIllumination16600 lux/1m (4400K) with reflectorColor reproductionCRI 97+/TLCI 98+Refresh rate1/2000 sLighting modesCCT, HSI, RGBCW, FX, SOURCE, GELApplicationNEEWER APPHousing materialAluminumDimensions195 x 95 x 92 mmWeight1041 gPower supplyPower cord / V mount battery (16.8V) and D-Tap

Neewer TL120C RGB LED lampThe Neewer TL120C LED lamp offers RGBWW light mixing technology and can be extended up to 127 cm in length. With a power output of 42 W and a maximum illumination of 2,000 lux at 0.5 m (5600K), the device provides soft and balanced light dispersion, while offering a wide range of color temperature (from 2,500 to 10,000 K), high color rendering index (CRI 97+ / TLCI 98+) and coverage of 90% of the color space of Rec. 2020.Independently controllable pixelsThe Neewer TL120C lamp features 32-bit pixels that can be independently controlled to adjust the brightness, color temperature and lighting effects of each segment. The 7 pixel effects allow precise representation of different scenarios, while 18 scene effects add realism and dynamics.Advanced dimming optionsThe TL120C offers advanced PWM dimming types, including exponential, logarithmic, S-type, and linear, for smooth and precise brightness adjustment. The HSI mode offers access to 36,000 colors, and the RGBCW mode allows adjustment of the color ratio from 0 to 255.Multiple control optionsThe device can be operated with buttons or wirelessly via the 2.4G system and the NEEWER app. With Infinity Network Meshing technology, hundreds of other lights can be controlled simultaneously, or multiple TL120C lights can be programmed for dynamic effects.Performance and refined designEnjoy a long lamp runtime. The TL120C is equipped with a 6,000 mAh battery that provides up to 120 minutes of continuous operation at 100% brightness. The lamp is also distinguished by its slim and elegant shape - its diameter is 4.5 cm and its weight does not exceed 3.23 kg, so it blends harmoniously with the background.Cooperation with other Neewer devicesThe TL120C allows integration with other Neewer lighting devices, such as TL60, BH30S, CB300, CB300B, CB200, CB200B, FS150, FS150B and FS230, to create even more advanced lighting effects. It is ideal for commercials, film production or music videos. The lamp will also work well for vlogging or live streaming.Mobility and ease of mountingThanks to its compact design and variety of mounting options, including a 1/4" thread on the bottom, the TL120C can be easily mounted on a variety of tripods or with the supplied clamps and steel wires.Included:LED lamp x1Power adapter x1Power cable x1Steel wire x2Mounting clamp x2DMX cable RJ45 x1Storage bag x1User manual x1 ManufacturerNeewerModelTL120CColor range0-360°Saturation0-100Scenario effects mode18 typesBrightness0%-100% (1% increase)Pixel effects mode7 kindsRGBCW mode0-255GM red and green compensation value.-50~+50CCT color temperature modeYesColor light mode HSTakXY coordinate value range0.0001-0.8000Dimming curve modellinear / S-type / logarithmic / exponentialPaper color adjustment40 typesBuilt-in battery14.4V/6000mAh/86.4WhOperating time120 minutes (100% brightness)Charging time120 minutesDC inputDC 20V/5ACompatibilityiOS/Android phonesMaximum power42 WMaximum illumination2000 lux at 0.5 m (5600K)Color temperature range2500 to 10000KColor modeCool / Warm / RGBCRI/TLCI97+/98+Number of special effects252.4G wireless controlTakWireless control via appTakOperating temperatureFrom -10°C-40°CMounting points1/4" threadMain materialPlasticDimensions4.5 x 127 cmWeight3.23 kg

RACK 19" 2U server cases from Lanberg Our 19" RACK server chassis is an excellent choice for both professional data centers and advanced individual users. This 2U case is designed to meet a variety of server construction and operation needs, while having a real impact on the performance of the entire system. Thanks to its well-thought-out design, it will perform well in business environments where reliability, flexibility and efficient airflow are important. The new series is an advanced server chassis with a variety of fan configurations and mounting space, making it even easier to expand hardware capabilities. These enclosures are distinguished by their robust construction, space for numerous storage media, and rich I/O panels for quick connection of devices via USB 3.0 ports. Importantly, our models support a variety of motherboard standards, and practical accessories are included for easy installation. As a result, each server can be configured optimally for server operation and flexibly adapted to changing needs. Supported ATX, ITX, Micro-ATX and SSI CEB motherboardsThe SC01-5202-12B server case is compatible with ATX, ITX, Micro-ATX and SSI CEB motherboards. This standard is ideal for servers and workstations based on Intel Xeon and AMD Epyc processors (X399/C600 chipsets). This approach provides a wide range of component choices and allows you to create configurations from basic servers to advanced systems for special tasks. As a result, the chassis can easily find its way both in a corporate environment and in a more private application within a home network. Impressive cooling: 3 powerful 80 mm PWM fans Good cooling and free airflow are key features for the proper operation of components. The SC01-5202-12B relies on compact but efficient cooling. The server case is equipped with 3 PWM 80 mm fans with adjustable speed (900-2600 RPM) and low noise level (26.1 dB). Thanks to a perforated front with a replaceable dust filter, air flows freely through the interior, ensuring optimal working conditions in a server room or RACK cabinet. Easy expansion with space for multiple hard drives and SSDsThis model, when properly configured, provides space for 4 2.5" drives and 6 3.5" drives, which gives you the possibility to create a really large storage space. Thus, the SC01-5202-12B server case allows you to easily expand the disk configuration without modifying the entire system. For users focusing on scalability and time saving, such a solution proves to be extremely practical. Solidly constructed server case: durability and resistance to damageEach Lanberg server case is made of galvanized steel with a thickness of as much as 1.2 mm, which significantly increases its resistance to mechanical damage. Compared to traditional solutions such as home tower server cases or the less well-made some ATX server cases, our RACK cabinet models stand out for their extra structural rigidity. This translates into years of reliability in the operation of any server. As a result, you can rest assured that your investment will bring you long-lasting benefits and remain stable even under heavy loads. Connect multiple components to a rich I/O panelA server and a server case are a duo that requires quick access to the most important ports. That's why you'll find 2 USB 3.0 Type-A ports on the front panel of our RACK models, as well as Power and Reset buttons. This makes server management convenient and intuitive, whether you're working in a professional server room or as part of an extended setup in a small or medium-sized business. Dedicated accessories for suitable power supply and mounting in 19" RACK cabinetsLanberg cases in this series offer a set of additional accessories: adapters for ATX, SFX and Flex ATX 1U power supplies, 1x PWM splitter and key lock. With these, you can easily mount the server in a 19" rack and customize the power supply. The complete accessory package means that even less experienced users can quickly get their server up and running.

RACK 19" 4U server cases from Lanberg Our 19" RACK server cases are an excellent choice for both professional data centers and advanced individual users. This 4U enclosure is designed to meet the most demanding needs in server construction and operation, while having a real impact on the performance of the entire system. Thanks to its well-thought-out design, it will excel in business and industrial environments where reliability, flexibility and efficient airflow are important. The new series are advanced server enclosures with a variety of fan configurations and mounting space, allowing you to expand your hardware capabilities even more easily. These enclosures are distinguished by their robust construction, space for numerous storage media, and rich I/O panels for quick connection of devices via USB 3.0 ports. Importantly, our models support a variety of motherboard standards, and practical accessories are included for easy installation. As a result, each server can be configured optimally for server operation and flexibly adapted to changing needs. Supported ATX, ITX, Micro-ATX and SSI EEB motherboardsThe SC01-5204-12B server case is compatible with ATX, ITX, Micro-ATX and SSI EEB motherboards. This standard is ideal for high-performance servers and workstations based on Intel Xeon and AMD Epyc processors (X399/C600 chipsets). It provides a wide range of possibilities for component selection and scaling of computing power, allowing you to create diverse configurations: from basic servers to advanced systems in data centers, large networks and industrial applications. Thoughtful design and ample space make server expansion simple and cost-effective in the long term. Advanced cooling: 5 PWM 120 mm fansGood cooling and free airflow are key features for the proper operation of components. To ensure optimal operating temperatures for high-performance components, the SC01-5204-12B server case is equipped with up to 5 large 120 mm PWM fans with adjustable speed (600-1500 RPM) and low noise level (33 dB).In addition, 2x additional 80×80 mm fans can be mounted on the rear wall of the case. Thanks to the perforated front with replaceable dust filter, air flows freely through the interior, ensuring optimal working conditions in a server room or RACK cabinet. Easy expansion with space for multiple hard drives and SSDsThe design provides space for 3 2.5" drives and as many as 10 3.5" drives when properly configured, giving you the ability to create massive storage space. With access to the 3.5" drive bays without having to unscrew the top cover, the SC01-5204-12B server case allows you to easily expand your disk configuration without having to disassemble or modify the entire system. For users focused on scalability and time saving, such a solution is extremely practical and convenient. Solidly constructed server enclosures: durability and resistance to damageEach Lanberg server case is made of galvanized steel with a thickness of as much as 1.2 mm, which significantly increases its resistance to mechanical damage. Compared to traditional solutions such as home tower server cases or the less well-made some ATX server cases, our RACK cabinet models stand out for their extra structural rigidity. This translates into years of reliability in the operation of any server. As a result, you can rest assured that your investment will bring you long-lasting benefits and remain stable even under heavy loads. Connect multiple components to a rich I/O panelA server and a server case are a duo that requires quick access to the most important ports. That's why you'll find 2 USB 3.0 Type-A ports on the front panel of our RACK models, as well as Power and Reset buttons. This makes server management convenient and intuitive, whether you're working in a professional server room or as part of an extended setup in a small or medium-sized business. Dedicated accessories for suitable power supply and mounting in 19" RACK cabinetsLanberg server cases in this series offer a rich set of accessories: 1x SFX power supply adapter, 2x PWM splitters, two 5x SATA power splitters and a key lock. With these, you can easily mount the server in a 19" rack and customize the power supply. The complete accessory package means that even less experienced users can quickly get their server up and running.

RACK 19" 2U server cases from LanbergOur 19" RACK server chassis is an excellent choice for both professional data centers and advanced individual users. This 2U enclosure is designed to meet the most demanding needs in server construction and operation, while having a real impact on the performance of the entire system. Thanks to its well-thought-out design, it will excel in business and industrial environments where reliability, flexibility and efficient airflow are important. The new series are advanced server enclosures with a variety of fan configurations and mounting space, allowing you to expand your hardware capabilities even more easily. These enclosures are distinguished by their robust construction, space for numerous storage media, and rich I/O panels for quick connection of devices via USB 3.0 ports. Importantly, our models support a variety of motherboard standards, and practical accessories are included for easy installation. As a result, each server can be configured optimally for server operation and flexibly adapted to changing needs. ATX, E-ATX, ITX, Micro-ATX and SSI CEB motherboards supportedThe SC01-6502-12B server case is compatible with E-ATX, ATX, ITX, Micro-ATX and SSI CEB motherboards. This standard is ideal for high-performance servers and workstations based on Intel Xeon and AMD Epyc processors (X399/C600 chipsets). It provides a wide range of possibilities for component selection and scaling of computing power, allowing the creation of diverse configurations: from basic servers to advanced systems in data centers, large networks and industrial applications. Advanced cooling: 7 PWM 80 mm fansGood cooling and free airflow are key features for the proper operation of components. To ensure optimal operating temperatures for high-performance components, the SC01-6502-12B server chassis is equipped with up to 7 high-performance 80 mm PWM fans with adjustable speed (900-2600 RPM). At maximum speed, they maintain a service life of up to 50,000 hours and generate a noise level of 26.1 dB. Thanks to the perforated front with a replaceable dust filter, air flows freely through the interior, ensuring optimal operating conditions in a server room or RACK cabinet. Easy expansion with space for multiple hard drives and SSDsThe design provides, when properly configured, space for 4 2.5" drives and as many as 6 3.5" drives to create a large storage space. This configuration allows you to easily store and segregate large volumes of data, which will be appreciated especially by companies growing at a rapid pace. Solidly constructed server enclosures: durability and resistance to damageEach Lanberg server case is made of galvanized steel as thick as 1.2 mm, which definitely increases its resistance to mechanical damage. Compared to traditional solutions, such as home tower server enclosures or the less well-made some ATX server enclosures, our RACK enclosure models stand out for their additional structural rigidity. This translates into years of reliability in the operation of any server. As a result, you can rest assured that your investment will bring you long-lasting benefits and remain stable even under heavy loads. Connect multiple components to a rich I/O panelA server and a server case are a duo that requires quick access to the most important ports. That's why you'll find 2 USB 3.0 Type-A ports on the front panel of our RACK models, as well as Power and Reset buttons. This makes server management convenient and intuitive, whether you're working in a professional server room or as part of an extended setup in a small or medium-sized business. Dedicated accessories for suitable power supply and mounting in 19" RACK cabinetsLanberg server cases in this series offer a rich set of accessories: interchangeable adapters for Flex ATX, ATX, SFX power supplies, 2x PWM splitters and a key lock. With these, you can easily mount the server in a 19" RACK rack and customize the power supply. The complete accessory package means that even less experienced users can quickly get their server up and running.

Compact ATX case in M-ATX format with integrated 6-inch display Real-time monitoring of system data via L-Connect 3 software Four pre-installed PWM fans for optimal airflow Mesh panels on the front, top, and bottom for efficient cooling Supports up to a 360 mm radiator for water cooling on the top Direct airflow to your GPU (up to 375 mm) by means of two 120 mm fans Side-mounted power supply unit with cable adapter for optimized airflow Includes GPU anti-sag bracket for secure graphics card support LANCOOL 207 Digital: Compact PC case with integrated display The Lian Li LANCOOL 207 Digital brings the traditional ATX layout into a space-saving micro-ATX case format. Lian Li integrates a 6-inch LCD display on the front, which displays key system information such as CPU and GPU temperatures, utilization, and RAM usage in real time via the L-Connect 3 software. In addition, you can show your own images or videos on the display and personalize your setup entirely to your preferences—a feature usually reserved only for high-end cases. Optimized cooling for demanding setups To ensure your system stays cool under heavy loads, the LANCOOL 207 Digital comes equipped with four high-performance fans. Two 140 mm fans on the front (up to 1,900 rpm) and two 120 mm PWM fans at the bottom (up to 1,950 rpm) provide targeted airflow directly to your GPU and CPU. The full mesh panels on the front, top, and bottom significantly improve airflow and keep your components optimally cooled. Maximize cooling performance with an AIO or custom water cooling solution by easily installing a radiator up to 360 mm on the top.

Aufrüst-Kit für den NH-U12S redux Tower-Kühler, für Push-Pull-Setup, PWM-Lüfter mit 450 bis 1.700 U/min, 4-Pin PWM Anschluss und Low-Noise-Adapter, inklusive Anti-Vibrations-Pads, inkl. Lüfter-Montageklammern