Otsing: gtx 1060

Thermal Grizzly introduces the Thermal Putties, a new product line specifically developed for the modification of graphics cards and the replacement of thermal pads between PCBs and heatsinks. However, Thermal Putties can also be used by hobbyists and experienced technicians for a variety of devices such as notebooks, handhelds, and gaming consoles. Flexible alternative to thermal pads with versatile areas of application Especially suitable for heatsinks with varying distances to critical components Basic version with medium thermal conductivity for efficient components Safe to use due to electrically insulating properties The flexible alternative to thermal pads: The Thermal Grizzly Putty Basic Thermal Grizzly Putty is a non-conductive alternative to traditional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences and is thus ideal as a replacement for thermal pads on graphics cards and other devices.⁣ Typically, several types of thermal pads of different heights are installed at the factory. When replacing these pads or modifying the cooler to a GPU water cooler, several different pads are needed. The flexible usability of Thermal Grizzly Putty solves this problem. How much Thermal Grizzly Putty do I need? For modifying a single, smaller graphics card without a backplate (e.g. GeForce GTX 1060), approximately one 30-gram jar of Thermal Grizzly Putty is needed. For a larger graphics card like a GeForce RTX 4090, usually one 30-gram jar is sufficient for the memory (VRAM) and voltage converters (VRM) on the front. On the back, between the PCB and the backplate of larger graphics cards, there is often a uniformly larger gap between the two surfaces. To completely fill this gap, about two 30-gram jars or one 100-gram jar are needed. Three variants for different applications With three different variants, the manufacturer offers the right product for every performance class. The Basic version is suitable for efficient components that produce little heat. The Advance version, with higher thermal conductivity, targets the mid-range segment with stronger components. For the high-end segment, Thermal Grizzly offers the Putty Pro, which ensures optimal cooling of your high-end components due to its excellent thermal conductivity. Flexible and safe application Before application, the target surface should be thoroughly cleaned and degreased, for example with Thermal Grizzly cleaning wipes or standard isopropanol. Thanks to its electrically insulating property, it can be applied over large areas using the included spatula. Alternatively, the Thermal Putty can be shaped by hand into small balls that can be sized according to the surface being covered (e.g. VRAM, SMD).

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative to thermal pastes from the higher performance segment. Similar to the Carbonaut pads, they have an adaptable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet, as a high-end product, offers significantly higher thermal conductivity. This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal aging as is the case with traditional thermal paste. It cannot dry out. Outstanding thermal conductivity Simple application Consistently high performance Extreme durability Caution: Electrically conductive! Follow instructions! The KryoSheet graphene pads have a molecular structure stacked in the Z direction. This optimized structure enables outstanding and constant thermal conductivity. This is due to a specially developed manufacturing process in which the hexagonal crystal structure of the graphite is broken up along the basal plane in order to exploit the anisotropy of the thermal conductivity of the graphite. As a side effect of this complex manufacturing process, however, the electrical conductivity is also increased and the stability of the KryoSheet pads is affected, so the pads should only be used according to the instructions! KryoSheet is available pre-assembled in various CPU/GPU standard sizes, e.g.: KryoSheet 25 x 25 mm Compatibility: Nvidia GPUs: RTX 4060, RTX 4060ti, RTX 4070, RTX 4070ti, RTX 4080 RTX 3050, RTX 3060, RTX 3060ti, RTX 3070, RTX 3070ti RTX 2060, RTX 2070 GTX 1630, GTX 1650, GTX 1650 Super, GTX 1660, GTX 1660 Super, GTX 1660 ti GTX 1050, GTX 1050 ti, GTX 1060, GTX 1070, GTX 1070 ti, GTX 1080, GTX 1080 ti, Titan X AMD GPUs: RX7600 RX 6600, RX 6600 XT, RX 6650 XT, RX 6700, RX 6700 XT, RX 6750 XT Note: We do not recommend using KryoSheet more than once! Disassembling the cooler and handling the KryoSheet after use may cause microcracks in the structure of the graphene pads, which may affect performance.

Thermal Grizzly introduces the Thermal Putties, a new product line specifically developed for modifying graphics cards and replacing thermal pads between PCBs and heatsinks. However, the Thermal Putties can also be used by hobbyists and experienced technicians for a variety of devices such as notebooks, handhelds, and gaming consoles. Flexible replacement for thermal pads with a wide range of applications Especially suitable for heatsinks with varying distances to critical components Advance version with high thermal conductivity for more powerful components Safe to use thanks to its electrically insulating property The flexible alternative to thermal pads: The Thermal Grizzly Putty Advance Thermal Grizzly Putty is a non-electrically-conductive alternative to conventional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences and is therefore ideal as a replacement for thermal pads on graphics cards and other devices. Typically, several types of thermal pads with varying heights are used from the factory, so when replacing the pads or converting the cooler to a GPU water cooler, several different pads are needed. This problem is solved by the flexible applicability of Thermal Grizzly Putty. How much Thermal Grizzly Putty do I need? For modifying a single, smaller graphics card without a backplate (e.g., GeForce GTX 1060), about a 30-gram jar of Thermal Grizzly Putty is needed. For a larger graphics card such as a GeForce RTX 4090, usually a 30-gram jar is sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the back, between the PCB and the backplate, larger graphics cards often have a consistent, larger gap between the two surfaces. Here, about two 30-gram jars or one 100-gram jar are needed if you want to completely fill this gap. Three variants for different applications The manufacturer offers three different variants for every performance class. The Basic variant is suitable for efficient components that generate low heat. The Advance variant, on the other hand, is aimed at the midrange segment with more powerful components thanks to its higher thermal conductivity. For the high-end segment, Thermal Grizzly offers Putty Pro, which ensures optimal cooling for your high-end components thanks to its particularly high thermal conductivity. Flexible and safe use Before application, the target surface should be thoroughly cleaned and degreased, for example with cleaning wipes from Thermal Grizzly or common isopropanol. Thanks to its electrically insulating property, it can be applied over large areas with the supplied spatula. Alternatively, the Thermal Putty can be formed by hand into small pellets that can be adapted in size to the surface to be applied (e.g., VRAM, SMD).

Product Details: Thermal Grizzly - Advance TG Putty Advance is a non-electrically conductive alternative to traditional thermal pads. This easy-to-apply and flexible material serves as a "gap filler," effectively compensating for height differences. It is an ideal replacement for thermal pads on graphics cards, where different pad thicknesses are typically used. When replacing pads or upgrading to a GPU water block, multiple thermal pad sizes are usually required. TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for smooth, even application over larger areas, while alternatively, the putty can be shaped into small beads that precisely fit components such as VRAM or SMDs. TG Putty can compensate for height differences ranging from 0.2 mm to 3.0 mm. Available Variants:TG Putty comes in three versions, each offering different levels of thermal conductivity: TG Putty Basic – Medium thermal conductivity TG Putty Advance – Good thermal conductivity TG Putty Pro – High thermal conductivity For upgrading a smaller graphics card without an active backplate (e.g., GeForce GTX 1060), a single 30g jar of TG Putty is usually sufficient. For larger models, such as the GeForce RTX 4090, one 30g jar typically covers the memory (VRAM) and voltage regulators (VRM) on the front side. Since high-end graphics cards often have a uniform gap between the PCB and the backplate, fully filling this space may require two 30g jars. Important Notes: TG Putty is not suitable for direct application on processors (IHS or Direct Die) or GPU chips. Before applying, ensure that the target surface is thoroughly cleaned and degreased using TG Cleaning Wipes or standard isopropanol. Package Contents: 1x TG Putty Advance 3x Spatulas

Thermal Grizzly introduces the Thermal Putty series, a new product line specifically developed for upgrading graphics cards and replacing thermal pads between PCBs and heatsinks. However, the Thermal Putty can also be used by hobbyists and experienced technicians for a variety of devices such as notebooks, handhelds, and gaming consoles. Flexible alternative to thermal pads with a wide range of applications Especially suitable for heatsinks with varying distances to key components Pro-version with very high thermal conductivity for high-end components Safe to use thanks to its electrically insulating properties The flexible alternative to thermal pads: The Thermal Grizzly Putty Pro Thermal Grizzly Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply, flexible gap filler, it compensates for height differences and is therefore ideal as a replacement for thermal pads on graphics cards and other devices.⁣ Typically, several types of thermal pads in varying thicknesses are used from the manufacturer, so when replacing the pads or modifying the cooler to a GPU water cooler, you would need several different pads. This issue is solved by the flexible application of Thermal Grizzly Putty. How much Thermal Grizzly Putty do I need? To upgrade a single, smaller graphics card without a backplate (e.g., GeForce GTX 1060), about one 30-gram jar of Thermal Grizzly Putty is needed. For a larger graphics card such as a GeForce RTX 4090, a 30-gram jar is generally sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the back side, between the PCB and the backplate of larger graphics cards, there is often a uniform, larger gap. Here, about two 30-gram jars or one 100-gram jar are needed if you want to completely fill this space. Three versions for different applications With three different versions, the manufacturer offers the right product for every performance class. The Basic version is suitable for efficient components with low heat generation. The Advance version, with higher thermal conductivity, is intended for midrange components with greater power. For the high-end segment, Thermal Grizzly offers Putty Pro, which provides optimal cooling for your high-end components thanks to its outstanding thermal conductivity. Flexible and safe to use Before application, the target surface should be thoroughly cleaned and degreased, for example with Thermal Grizzly cleaning wipes or standard isopropanol. Thanks to its electrically insulating property, it can be spread over large areas with the included spatula. Alternatively, the Thermal Putty can be shaped by hand into small balls, which can be matched in size to the area to be covered (e.g., VRAM, SMD).

Tap into the Gaming Excellence of HDMI 2.1Immerse yourself in high-speed data transfer with HDMI 2.1, crafted to cater to modern gamers' desires for enhanced resolutions and rapid refresh rates. Our world's premier consumer-graded HDMI 2.1 PCIe capture card, Live Gamer 4K 2.1, paves the way for unparalleled gaming experiences on PCs and next-gen consoles, boasting 4K144 and 4K120 pass-through.High Refresh Rates and Ultra-Wide Resolutions Support Level up your gameplay with support for refresh rates up to 240Hz in 1440p and a staggering 360Hz in 1080p HDR/VRR pass-through. No challenge is too great, as the Live Gamer 4K 2.1 also natively supports ultra-wide resolutions in different refresh rate combinations.Capture in Diverse Resolutions No matter your input resolution, the Live Gamer 4K 2.1 supports a wide range of capturing resolutions and options tailored to your needs, including *HDR10 capture. Now, with AVerMedia’s Streaming Center, you can also capture up to 4K144 or 4K120, unlocking ultra-high frame rate recording for next-gen gameplay. Capture and let your gaming moments shine! Hear Every Detail with 5.1 Surround Sound Feel every footstep, explosion, and ambient sound as if you were right there. The Live Gamer 4K 2.1 now supports 5.1-channel surround sound pass-through and capture, letting you to fully immerse yourself in rich, lifelike multi-channel audio. Whether you're playing solo or streaming live, you'll hear your game world in a whole new dimension. *The 5.1-channel capture is available in both Streaming Center and Streaming Center Plug (OBS Plugin) and is only supported on Windows.Elevate Your Gaming Ambiance Personalize your capture card with customizable RGB lighting or seamlessly sync it with major gaming RGB ecosystems, transforming it into a vibrant masterpiece that complements your gaming setup.SpecificationsInterface: PCIe Gen 3 x4Video Input: HDMI 2.1Video Output (Pass-Through): HDMI 2.1Max Pass-Through Resolutions: 2160p144 HDR/VRR, 3440x1440p 120 HDR/VRR, 1440p240 HDR/VRR, 1080p360 HDR/VRRMax Capture Resolution: 2160p144*, 2160p60: Check the list of supported resolutions and frame rates here. 2160p144 capture only available on Streaming CenterVideo Format: YUY2, NV12, RGB24, P010(HDR)Supports 5.1 multi-channel audio. LPCM format supports stereo (LPCM 2.0ch) only. Learn moreDimensions (W x D x H): 121 x 160.5 x 21.5 mm (4.76 x 6.32 x 0.85 in)Weight: 150.5 g (5.31 oz)System RequirementsWindows® 10 x64 / 11 x64 or laterDesktop: Intel® Core™ i5-6XXX / AMD Ryzen™ 3 XXX or above + NVIDIA® GTX 1060 / AMD RX 5700 or above8 GB RAM recommended (Dual-channel)Make sure that both your display and console (PS5, PS4 Pro, Xbox Series X/S, Xbox One X) support HDMI 2.1 connections.If your monitor supports built-in DSC (Display Stream Compression), be aware that the maximum supported video pass-through might be 4K120.AVerMedia Supported SoftwareAVerMedia Assist Central ProAVerMedia Streaming Center (Windows only)AVerMedia Streaming Center Plug (OBS Plugin)Firmware update tool