Otsing: mana 136

Planet switch IGS-10020PT industrial 8xGE PoE SFP

LevelOne FSW-2450. Lüliti tüüp: Unmanaged network switch. Etherneti vaskkaablite tehnoloogia: 100BASE-TX,10BASE-T. Võrgustandardid: IEEE 802.1p,IEEE 802.3,IEEE 802.3u,IEEE 802.3x. MAC-aadresside tabel: 8000 sisestust, Toetatud ...

Planet switch / unmanaged / (GSW-1601) - 16 x 1000Base-T - 32Gbps, 8K, 2.2Mbit, 19"

The AdderLink XDIP is a compact, easy to install, fanless matrix solution that runs on a standard IP network and enables users to extend and manage their computers with ultra-low latency, HD video and stereo audio. The XDIP is scalable, from simple extension to small matrix. It is very well suited to small and medium sized installations. • Uses IP technology over standard CATx network cable • Point-to-point, switching, sharing or small matrix operation • Local USB and video feed through ports • PoE models are powered by PoE or an optional external PSU • USB2.0 (low & full speed) for keyboard, mouse, tablet and touch screen • Analog audio with headphone support Product Codes XDIP-POE XDIP-IEC XDIP-xx XDIP-RED XDIP-PSU-US* XDIP-PSU-RED* * US market specific     Configurable units The XDIP user and computer units are the same and assigned a role at set up. They can transmit/receive up to 1920x1200 video, stereo analog audio and USB2.0 over a single CATx network cable. High quality video, real time control XDIP implements low latency, high quality, 60Hz video compression to deliver an “at the computer” user experience over a standard Gigabit LAN. CATx cable for connection Video, USB2.0 and audio all pass along a single minimum spec of CAT5e cable allowing use of existing infrastructure cables in the building and an immediate ROI. Distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances are achieved by routing through your IP infrastructure. Feed through and local computer support Video and USB feed through ports are available. These enable a local console at the source computer. A local computer is also supported at the user station. One solution, many uses   XDIP nodes can be configured as a simple extender, distributed KVM switch or KVM sharer or any combination up to 8 computers and 8 users (each user does not necessarily need to be connected to the same 8 computers). EDID management The extender has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer or alternatively, a fixed EDID can be specified. Plug and Play There is no need for drivers or software to be installed. A simple wizard takes you through setup at the start of life of the product. CD-quality analog audio CD-quality stereo audio (16-bit sampling at 48kHz) is passed between the local and remote units. Headphones are also supported (16 to 32 Ohms).

PLANET 24-Port 100/1000Base-X SFP plus 4-Port 10G SFP+, L2/L4 Managed Metro Ethernet Switch (AC+DC Power Redundant, 2xDI, 2xDO) (MGSW-28240F)

Planet switch SW-804; 8x 10/100mbps; Unmanaged

PLANET IPv6 L2+/L4 Managed 24-Port 802.3at PoE+ Gigabit Ethernet Switch + 4-Port Shared SFP (440W) (WGSW-24040HP4)

PLANET IPv6 Managed 16-Port 802.3at PoE Gigabit Ethernet Switch + 4-Port SFP (230W) (WGSW-20160HP)

 8 IEEE 802.3af and IEEE 802.3at PoE+ standard ports  36-watt output per PoE+ port in high-power mode  Turbo Ring and Turbo Chain (recovery time < 50 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy  RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security  Security features based on IEC 62443  EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring  Supports MXstudio for easy, visualized industrial network management  V-ON™ ensures millisecond-level multicast data and video network recovery The EDS-G512E Series is equipped with 12 Gigabit Ethernet ports and up to 4 fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. It also comes with 8 10/100/1000BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant Ethernet port options to connect high-bandwidth PoE devices. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of triple-play services across a network quickly. Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, RSTP/STP, and MSTP increase the reliability of your system and improve the availability of your network backbone. The EDS-G512E Series is designed specifically for communication demanding applications, such as video and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable backbone construction.   Additional Features and Benefits Command line interface (CLI) for quickly configuring major managed functions Advanced PoE management function (PoE port setting, PD failure check, and PoE scheduling) DHCP Option 82 for IP address assignment with different policies Supports EtherNet/IP, PROFINET, and Modbus TCP protocols for device management and monitoring IGMP snooping and GMRP for filtering multicast traffic Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning Supports the ABC-02-USB (Automatic Backup Configurator) for system configuration backup/restore and firmware upgrade Port mirroring for online debugging QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism Port Trunking for optimum bandwidth utilization RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC address to enhance network security SNMPv1/v2c/v3 for different levels of network management RMON for proactive and efficient network monitoring Bandwidth management to prevent unpredictable network status Lock port function for blocking unauthorized access based on MAC address Automatic warning by exception through email and relay output

The AdderView DDX10 is a new breed of high performance KVM Matrix that provides powerful functionality inside a small, compact form factor. Featuring Adder’s trusted lossless KVM extension technology with flexi-port switching capability, the DDX enables multiple users to access multiple computers located safely and securely inside your server room. 10 configurable user/computer ports Multi-view thumbnail on-screen display Lossless HD video in real-time Extension distance of up to 50m from switch to user console USB for Keyboard, Mouse & Touchscreen ‘Zero U’ DVI, VGA and DisplayPort Computer Access Modules (CAMs) Product Codes DDX10 10 port KVM Matrix AdderView DDX10 is a flexible 10 port KVM Matrix which can be re-configured to match your requirements. Each port can be configured as a computer input or user output. Once configured, simply connect your Computer Access Modules (DDX CAM) and User stations (DDX USR). High density KVM Matrix The DDX range features ‘zero U’ computer access modules and a high density 1U KVM Matrix switch, ideal for installation in heavily populated server racks for small and medium sized applications. Lossless HD video support The DDX10 delivers lossless HD video at resolutions of up to 1920x1200 @60Hz providing a real-time, ‘at the PC’ experience. Frame rate matching makes this product ideal for applications using non standard refresh rates. Optimal USB technology DDX10 emulates a fully featured keyboard, mouse and touchscreen* to all computers, maintaining fast switching speeds and instant USB interaction. * Touchscreens need to be Windows 8 compliant. Multi-view on-screen thumbnail display for computer selection The unique multi-view OSD provides users with a live preview of permitted computers direct on their screen. Users can highlight their selection using a mouse cursor. Once highlighted, the user has the ability to choose from 4 different connection modes.  Access permissions Each user station can be granted different access permissions on a per computer basis. Once computer access is permitted, administrators can select which levels of control will be available, allowing users to choose between View only, Shared, Exclusive or Private connection modes.  Exclusive and private connection modes The DDX10 enables users to work safely and securely with a choice of connection modes. In Exclusive mode, users have full KVM control while being able to share video content with other colleagues. By connecting in Private mode, users can work in privacy.  Multi-head video support DDX10 transmitters & receivers can be grouped to form ‘Computers’ and ‘Consoles’ that support dual-head & quad-head connectivity.  ‘Zero U’ Computer Access Modules (CAMs) Powered by USB, the digital computer access modules sit in-line and are ideal for racks with limited space. Modules are available in DVI, VGA and DisplayPort options.  Secure web control interface System administrators can securely access the DDX10 management tools to configure system settings, set access privileges and control video connections. The interface is secured using HTTPS & administrators must login each time they connect. An API enables switch control from a 3rd party control system. 

User-definable Modbus TCP Slave addressing  Supports RESTful API for IIoT applications  Supports EtherNet/IP Adapter  2-port Ethernet switch for daisy-chain topologies  Saves time and wiring costs with peer-to-peer communications  Active communication with MX-AOPC UA Server  Supports SNMP v1/v2c  Easy mass deployment and configuration with ioSearch utility  Friendly configuration via web browser  Simplifies I/O management with MXIO library for Windows or Linux  Class I Division 2, ATEX Zone 2 certification   Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments Introduction The ioLogik E1200 Series supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series speaks six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the same time, allowing you to get your applications connected easily and effortlessly.   Daisy-Chained Ethernet I/O Connection This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation, security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus solutions. The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation possibilities for your remote I/O applications, but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining devices in this way will also reduce overall labor and cabling expenses.   Save Time and Wiring Costs with Peer-to-Peer Communications In remote automation applications, the control room and sensors are often far removed, making wiring over long distances a constant challenge. With peer-to-peer networking, users may now map a pair of ioLogik Series modules so that input values will be directly transferred to output channels, greatly simplifying the wiring process and reducing wiring costs.       User-Definable Modbus TCP Addressing for Painless Upgrading of Existing Systems For Modbus devices that are controlled and detected by fixed addresses, users need to spend a vast amount of time researching and verifying initial configurations. Users need to locate each device’s networking details, such as I/O channels or vendor-defined addresses, to enable the initial or start address of a SCADA system or PLC. Devices that support user-definable Modbus TCP addressing offer greater flexibility and easier setup. Instead of worrying about individual devices, users simply configure the function and address map to fit their needs.       Push Technology for Events When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.  

Features and Benefits  Protocol conversion between PROFIBUS and Modbus TCP  Supports PROFIBUS DP V1 master  Supports Modbus TCP client/server  Automatic scan of PROFIBUS devices and easy configuration  Web-based GUI for I/O data visualization  Embedded traffic monitoring/diagnostic information for easy troubleshooting  Status monitoring and fault protection for easy maintenance  Supports redundant dual DC power inputs and 1 relay output  -40 to 75°C wide operating temperature models available  Serial port with 2 kV isolation protection  Security features based on IEC 62443 Introduction The MGate 5101-PBM-MN gateway provides a communication portal between PROFIBUS devices (e.g. PROFIBUS drives or instruments) and Modbus TCP hosts. All models are protected with a rugged metallic casing, DIN-rail mountable, and offer optional built-in optical isolation. The PROFIBUS and Ethernet status LED indicators are provided for easy maintenance. The rugged design is suitable for industrial applications such as oil/gas, power, process automation, and factory automation.   Windows Utility for Easy Configuration and Traffic Monitoring The MGate Manager utility provides a user-friendly interface to make configuration and operation as easy as possible. Moxa’s innovative AutoScan function can automatically detect all connected PROFIBUS slave devices and their available I/O modules to quickly complete gateway configuration, after which an easy-to-read data mapping table is created to assist in the configuration of Modbus TCP master (e.g., SCADA, PLC) settings. In addition, users can configure import/export maintenance functions, and use embedded monitoring tools to maintain logs of Modbus communication packets, which can be used for troubleshooting.       A Variety of Maintenance Functions The MGate 5101-PBM-MN provides a Web console and Telnet console for remote maintenance, with both consoles supporting encryption commutation functions such as HTTPS and SSH for preventing unauthorized access. The log functions are provided in firmware such as connection event of Modbus or PROFIBUS for maintenance. Users can monitor each I/O data and review the log through the web console remotely. A relay output alarm is provided for the power input status. It gives maintenance engineers an additional tool for troubleshooting and maintenance.   Redundant Power Inputs The MGate 5101-PBM-MN has dual power inputs for greater reliability. The power inputs allow simultaneous connection to 2 live DC power sources to provide uninterrupted operation even if one power source fails. The higher level of reliability makes these advanced PROFIBUS-master-to-Modbus-TCP gateways ideal for demanding industrial applications.

 3 Gigabit Ethernet ports for redundant ring or uplink solutions  Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches),  RSTP/STP, and MSTP for network redundancy  RADIUS, TACACS+, SNMPv3, IEEE 802.1x, HTTPS, SSH, and sticky MAC address to enhance network security  Security features based on IEC 62443  EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring  Supports MXstudio for easy, visualized industrial network management  V-ON™ ensures millisecond-level multicast data and video network recovery Introduction The EDS-510E Gigabit managed Ethernet switches are designed to meet rigorous mission-critical applications, such as factory automation, ITS, and process control. The 3 Gigabit Ethernet ports allow great flexibility to build up a Gigabit redundant Turbo Ring and a Gigabit uplink. The switches have USB interfaces for switch configuration, system file backup, and firmware upgrade, making them easier to manage.   Additional Features and Benefits Command line interface (CLI) for quickly configuring major managed functions DHCP Option 82 for IP address assignment with different policies Supports EtherNet/IP, PROFINET, and Modbus TCP protocols for device management and monitoring IGMP snooping and GMRP for filtering multicast traffic Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning Configurable by web browser, Telnet/USB console, CLI, MXconfig, and ABC-02-USB automatic backup configurator QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism Port Trunking for optimum bandwidth utilization SNMPv1/v2c/v3 for different levels of network management RMON for proactive and efficient network monitoring Bandwidth management to prevent unpredictable network status Lock port function for blocking unauthorized access based on MAC address Automatic warning by exception through email and relay output

 8 built-in PoE+ ports compliant with IEEE 802.3af/at  Up to 36 W output per PoE+ port  3 kV LAN surge protection for extreme outdoor environments  PoE diagnostics for powered-device mode analysis  2 Gigabit combo ports for high-bandwidth and long-distance communication  Operates with 240 watts full PoE+ loading at -40 to 75°C  Supports MXstudio for easy, visualized industrial network management  V-ON™ ensures millisecond-level multicast data and video network recovery Introduction Moxa’s EDS-P510A Series has 8 10/100BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant Ethernet ports, and 2 combo Gigabit Ethernet ports. The EDS-P510A-8PoE Ethernet switches provide up to 30 watts of power per PoE+ port in standard mode and allow high-power output of up to 36 watts for industrial heavy-duty PoE devices, such as weather-proof IP surveillance cameras with wipers/heaters, high-performance wireless access points, and IP phones. The EDS-P510A Ethernet Series is highly versatile, and the SFP fiber ports can transmit data up to 120 km from the device to the control center with high EMI immunity. The Ethernet switches support a variety of management functions, as well as STP/RSTP, Turbo Ring, Turbo Chain, PoE power management, PoE device auto-checking, PoE power scheduling, PoE diagnostic, IGMP, VLAN, QoS, RMON, bandwidth management, and port mirroring. The EDS-P510A Series is designed with 3 kV surge protection for harsh outdoor applications to increase the reliability of PoE systems.   Additional Features and Benefits Supports different PoE output settings (High-power 36 W, Force and Legacy modes) to maximize powered device compatibility Supports Smart PoE functions (PoE diagnosis, PD failure check, PoE scheduling, PoE Event Warning) to enhance PoE operational efficiency Command line interface (CLI) for quickly configuring major managed functions DHCP Option 82 for IP address assignment with different policies Supports EtherNet/IP and Modbus TCP protocols for device management and monitoring Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches),  RSTP/STP, and MSTP for network redundancy Compatible with PROFINET protocol for transparent data transmission IGMP snooping and GMRP for filtering multicast traffic Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism Port Trunking for optimum bandwidth utilization TACACS+, IEEE 802.1X, SNMPv3, HTTPS, and SSH to enhance network security Lock port function for blocking unauthorized access based on MAC address SNMPv1/v2c/v3 for different levels of network management RMON for proactive and efficient network monitoring Bandwidth management to prevent unpredictable network status Port mirroring for online debugging Automatic warning by exception through email and relay output

12-Port Gigabit IEEE 802.3at PoE+ Managed Injector Hub (360 watts)

The MGate MB3660 (MB3660-8 and MB3660-16) gateways are redundant Modbus gateways that convert between the Modbus TCP and Modbus RTU/ASCII protocols. They can be accessed by up to 256 TCP master/client devices, or connect to 128 TCP slave/server devices. The MGate MB3660 isolation model provides 2 kV isolation protection suitable for power substation applications. The MGate MB3660 gateways are designed to easily integrate Modbus TCP and RTU/ASCII networks. The MGate MB3660 gateways offer features that make network integration easy, customizable, and compatible with almost any Modbus network. For large-scale Modbus deployments, MGate MB3660 gateways can effectively connect a large number of Modbus nodes to the same network. The MB3660 Series can physically manage up to 248 serial slave nodes for 8-port models or 496 serial slave nodes for 16-port models (the Modbus standard only defines Modbus IDs from 1 to 247). Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway.   High Performance with Innovative Command Learning The MGate MB3660 gateways support two communication modes: transparent mode and agent mode. For transparent mode, the gateway converts Modbus commands from Modbus TCP to Modbus RTU/ASCII, and vice versa, or from serial (master) to serial (slave). However, since only one Modbus protocol request-response action can be executed at any given time, each Modbus device has to wait its turn, resulting in poorer performance. In order to provide better performance, the MGate MB3660 gateways are designed with an innovative Command Learning function, which can be activated with a single mouse click. Once activated, the gateway will learn and remember the Modbus commands it receives, and once a command has been learned, the gateway will act as though it were in agent mode, and actively send Modbus requests to the relevant Modbus devices. Since the data is saved in a different memory space that can be accessed by the SCADA system, the SCADA system can retrieve Modbus response data directly from the gateway’s memory, instead of waiting for the data to pass through the Modbus devices, dramatically increasing communication performance.   Auto-Device Routing for Easy Configuration (Patented) Moxa’s Auto-Device Routing function helps eliminate many of the problems and inconveniences encountered by engineers who need to configure large numbers of Modbus devices. A single mouse click is all that’s required to set up a slave ID routing table and configure Modbus gateways to automatically detect Modbus requests from a supervisory control and data acquisition (SCADA) system. By removing the need to manually create the slave ID routing table, the Auto-Device Routing function saves engineers significant time and reduces cost.   Modbus Gateway with Power and Ethernet Redundancy For a complicated Modbus system, redundancy is extremely important. The MGate MB3660 Modbus gateways support redundancy for both the power input and Ethernet connection. The MGate MB3660 gateways come with dual AC or DC power inputs built in for power redundancy, and have dual Ethernet ports (with different IPs) for network redundancy. To accommodate different types of applications, the dual Ethernet ports can be configured in one of two ways: Use the same IP for both Ethernet ports. In this case, the MGate MB3660 gateway will automatically switch to the backup LAN when the main LAN fails. Use different IP addresses for each of the two Ethernet ports. In this case, Modbus clients/masters can use both Ethernet ports to communicate with Modbus RTU/ASCII slave devices at the same time.   Supports Auto Device Routing for easy configuration  Supports route by TCP port or IP address for flexible deployment  Innovative Command Learning for improving system performance  Supports agent mode for high performance through active and parallel polling of serial devices  Supports Modbus serial master to Modbus serial slave communications  2 Ethernet ports with the same IP or dual IP addresses for network redundancy  microSD card for configuration backup/duplication and event logs  Accessed by up to 256 Modbus TCP clients  Connects up to Modbus 128 TCP servers  RJ45 serial interface (for “-J” models)  Serial port with 2 kV isolation protection (for “-I” models)  Dual VDC or VAC power inputs with wide power input range  Embedded traffic monitoring/diagnostic information for easy troubleshooting  Status monitoring and fault protection for easy maintenance

The AdderLink XDIP is a compact, easy to install, fanless matrix solution that runs on a standard IP network and enables users to extend and manage their computers with ultra-low latency, HD video and stereo audio. The XDIP is scalable, from simple extension to small matrix. It is very well suited to small and medium sized installations. • Uses IP technology over standard CATx network cable • Point-to-point, switching, sharing or small matrix operation • Local USB and video feed through ports • PoE models are powered by PoE or an optional external PSU • USB2.0 (low & full speed) for keyboard, mouse, tablet and touch screen • Analog audio with headphone support Product Codes XDIP-POE XDIP-IEC XDIP-xx XDIP-RED XDIP-PSU-US* XDIP-PSU-RED* * US market specific     Configurable units The XDIP user and computer units are the same and assigned a role at set up. They can transmit/receive up to 1920x1200 video, stereo analog audio and USB2.0 over a single CATx network cable. High quality video, real time control XDIP implements low latency, high quality, 60Hz video compression to deliver an “at the computer” user experience over a standard Gigabit LAN. CATx cable for connection Video, USB2.0 and audio all pass along a single minimum spec of CAT5e cable allowing use of existing infrastructure cables in the building and an immediate ROI. Distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances are achieved by routing through your IP infrastructure. Feed through and local computer support Video and USB feed through ports are available. These enable a local console at the source computer. A local computer is also supported at the user station. One solution, many uses   XDIP nodes can be configured as a simple extender, distributed KVM switch or KVM sharer or any combination up to 8 computers and 8 users (each user does not necessarily need to be connected to the same 8 computers). EDID management The extender has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer or alternatively, a fixed EDID can be specified. Plug and Play There is no need for drivers or software to be installed. A simple wizard takes you through setup at the start of life of the product. CD-quality analog audio CD-quality stereo audio (16-bit sampling at 48kHz) is passed between the local and remote units. Headphones are also supported (16 to 32 Ohms).

Wall bracket LCD/LED 23-55 double arm, 45kg- Enables secure mounting on the LCD / LCD display or TV- Steel construction guarantees maximum safety- Mounting the display in VESA standard- Two-hinged boom with adjustable distance from the wall- Ability to adjust the tilt angle- The ability to adjust the rotation in the horizontal plane- Integrated cable management system- Ideal for home, office and commercial use

 Automatic CO/CPE negotiation reduces configuration time  Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain  LED indicators to simplify troubleshooting  Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km. The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications. To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting.   Additional Features and Benefits Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality) Moxa proprietary Turbo Speed connections up to 15.3 Mbps Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery Supports SNMP v1/v2c/v3 for different levels of network management Interoperable with Turbo Ring and Turbo Chain network redundancy Support Modbus TCP protocol for device management and monitoring Compatible with EtherNet/IP and PROFINET protocols for transparent transmission IPv6 Ready

Dell 65-Watt USB-C Power Adapter - Euro Now you don't have to carry the power adapter back and forth between the office and home. Equip yourself with a second mains adapter for your notebook, so you have one for the office and one for home or on the go. - 65 watts to operate and charge your notebook at the same time - 1 meter long power cord is included - With rubber straps for easy cable management and LED light ring on the DC connector

Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km   Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission.  LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss.   Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.   

Tenda switch TEG1116P-16-150W-EU network Unmanaged Gigabit Ethernet (10/100/1000) Bronze Power over Ethernet (PoE)

Diivan LEO 2-kohaline, helepruun. Kattematerjal on naturaalne lehmanahk ja kunstnahk. Karkass on valmistatud eukalüpti täispuidust ja vineerist. Tootel on pocket vedrud. Polsterdus: polüuretaanvaht. Diivanil on metallist jalad. Toote mõõdud on 136x86xH85cm.

ADDER DVA is a high performance VGA to DVI-D video converter that transforms analog signals to digital. Placed in-line and USB powered this solution fits well with the AdderLink Infinity range of products.  It converts VGA signals, up to 1920 x 1200 @ 60Hz, into a DVI standard equivalent. • Analog to digital video conversion up to 1920 x 1200 (165MHz max. pixel frequency) • EDID management to ensure clean operation • Adjustment control for alignment, tone, sharpness and brightness • Adjustment control for alignment, tone, sharpness and brightness • USB powered with USB feed through Product Codes Adder DVA High quality VGA to DVI-D conversion Adder DVA is a high quality VGA to DVI-D converter supporting most resolutions up to 1920 x 1200 @ 60Hz. Auto calibration  Adder DVA auto calibrates for horizontal and vertical position. Manual adjustment is also available through the Virtual Control Panel (VCP) app, if required. EDID management EDID management is a critical element in VGA/DVI-D conversion, to ensure the correct settings are passed to the computer’s graphics card. USB powered with pass through  Adder DVA requires no separate power adapter and instead draws less than 300mA in operation from a spare USB port on the computer. A USB pass-through port is made available on the Adder DVA to allow a low-powered USB device to be connected; thus, the same total number of USB ports remain available for other uses. Flash upgradeable Adder DVA is flash upgradeable, allowing custom EDID adjustment for non-standard operations. Upgrades are achieved via the USB port. Virtual control panel app over DDC-CI Adder DVA is supplied with a Virtual Control Panel (VCP) app which allows brightness, tone and sharpness to be adjusted. Vertical and horizontal video alignment can also be adjusted, where necessary. The VCP app contains a test pattern to accurately display the changes. EDID management options can also be changed and the EDID’s of the monitors can be displayed.

Producer: Remax Product Code: RC-050a/BK Length: 1.0m Color: Black Compatible with all mobile phones and devices witch use USB 3.0 Type-C data connection and charge standard! Cable type: Strong & Flexible Silicone Cable with rubber surface. Strong & Flexible cable series has rubber surface and it is made from superb soft and high protection rubber materials Remax is a modern and high quality premium brand from Korea which is covering a wide range of the most important accessories for mobile phones and mobile devices . All Remax products combines the reliability and durability, which managed to get through attention to the selection of the highest quality materials and components. Remax products has bright and original design and technical solutions, which makes these products unique, and nothing can compare with them. Compatibility: Huawei P9 Vivo Xplay5 Elite ZOPO Speed 8 ZTE Axon 7 Nextbit Robin LG V20 Huawei P9 Plus Smartron t.phone Huawei Nova Huawei Nova Plus Meizu MX6 Nubia Z11 Meizu Pro 5 Meizu Pro 6 HTC 10 Samsung Galaxy Note7 LG G5 ZUK Z2 Pro Moto Z Moto Z Force ASUS ZenFone 3 ASUS ZenFone 3 Deluxe ASUS ZenFone 3 Ultra Lenovo ZUK Z1 Gionee S6 Gionee S Plus Intex Aqua Secure Lenovo Z2 Plus Packed in Remax Blister Package Designed in Hong Kong. Made in China. Manufacturer warranty: 12 months.

Traditsioonilise retsepti järgi valmistatud õlu. See õlu on tuntud omanäolise rikkaliku maitse ja humalate tugeva mõrkja maitse järgi. MEISTRITE GILDI pakub laias valikus õllesid, mille seas leidub lemmik igale maitsele. Traditsioonilised retseptid, õige pakend ja hind – need on parimad põhjused poes alati MEISTRITE GILDI valimiseks. MEISTRITE GILDI – tõeliselt mehelik õlu meestele! Hele õlu MEISTRITE GILDI „Eripruul“ Kirjeldus INSPIREERITUD AJALOOST, TÄIUSTATUD JA VIIMISTLETUD PIKKADE AASTATE JOOKSUL. ÕLLEMEISTRITE VALITUD ESMAKLASSILISE KVALITEEDIGA ÕLU. Kõrge kvaliteediga eripruul , sisaldab otra.

ADDER C-USB-LAN is a high performance USB extender that enables you to locate your critical computing hardware away from the user work station whilst maintaining the original user desktop experience. It can transmit USB2.0 over a single CATx cable or via an 1GbE IP network: Transparent USB2.0 operation 100m extension distance Switchable and routable USB2.0 Hi-speed for mass storage devices plus: USB2.0 (low and full speed) for keyboard, mouse, tablet and touch screen Supports USB3.0 controllers Isochronous support for audio devices and web cams Plug and play Product Codes C-USB-LAN-P-XX; C-USB-LAN-R-XX; C-USB-LAN-T   USB 2.0 Enables connection of any USB human interface device - from mice and keyboards through to touch screens, graphics tablets, jog shuttles, joysticks and 3D explorers. Mass storage devices and isochronous devices such as webcams and headsets can also be used.  Transparent operation Once connected, operation is totally transparent to the host system, the USB peripheral(s) and you, the user. There are no drivers to install and your USB devices work precisely as they did before; the only difference is that they are now up to 100 meters away from the host. There is no need for drivers or software to be installed. Plug and Play Adder C-USB-LAN extenders are delivered in a zero config state so you can plug the units in and start working with them straight away. When supplied as pairs, they are already synchronized, so they will locate each other automatically over your network.  Integrated A.I.M. control  The C-USB-LAN can be controlled and switched via the AdderLink Infinity Manager (A.I.M.), or it can operate separately, as a point to point USB extender using a single length of CATx cable. API An API is available, supporting all functionality to which authorized 3rd party control systems can interface. Support for audio devices With Isochronous support the C-USB-LAN will work with USB microphones and headsets as well as web cams

Korpus: Mini Protsessor: Intel i3-10100T Protsessori kiirus: 3.00 GHz ProtsessorMaxSpeed: 3.80 GHz Protsessori põlvkond: 4 cores / 8 threads kiibistik: Intel Q470 vahemälu: 6 MB Maksimaalne operatiivmälu: 64 GB Mälupesade arv: 2 Vabu mälupesasi: 1 Mälusiin: DDR4 3200 Kõvaketta kiirus: NVMe PCI-Express Kõvakettaid: 1 Kõvaketta tüüp: SSD Videokaart: Integrated Videokaardi tüüp: Intel UHD 630 Videokaardi tüüpMemorySize: - Videokaardi tüüpMälusiin: System Jagatud Audio: Jah Audio funktsioonid: Realtek ALC3205 codec internal speaker combo microphone/headphone jack Võrgukaart: Jah võrguseade: Intel I219-LM GbE Võrgukaart tüüp: Gigabit Ethernet Traadita internet (WiFi): Ei traadita internet (WiFi): - Traadita interneti omadused: - Bluetooth: Ei Optiline seade: Ei Monitor: - klaviatuur: Ei Klaviatuuri tüüp: - Hiir: Ei Operatsioonisüsteem: Windows 10 Pro Turvalisus: Power-on password SATA disable Setup password kaabel lock USB disable Serial disable Secure Erase Sure Click Sure Sense DriveLock TPM 2.0 shipped koos Windows 10. (Common Criteria EAL4+ Certified) BIOsphere Gen6 Client Security Manager Gen6 ManagementFeatures: HP BIOS Config Utility (download) HP Client Catalog (download) HP Driver Packs (download) HP System tarkvara Manager (download) HP Cloud Recovery HP Management Integration Kit for Microsoft System Center Configuration Management Gen 4 HP Image Assistant Gen 5 Kaasasolev tarkvara: - Power: 65W Smart nPFC Straight toiteplokk laius: 177 mm sügavus: 175 mm kõrgus: 34 mm PackageSize: 49.8 x 23.5 x 13.2 cm kaal: 1.25 kg Grosskaal: 3.40 kg Laienduspesad: 1x M.2 2230 1x M.2 2280 1x 2.5" Eesmised laienduspesad: Audio jack USB Type-C USB 3.2 USB 3.1 Laienduspesad: G6 DM SATA cage 35W No Intel vPro without 3rd video Kaardilugeja: Ei SmartKaardilugeja: Ei FingerprintReader: Ei Klaviatuuri asetus: EN

Features and Benefits  10/100BaseT(X) (RJ45 connector)  Compact size for easy installation  QoS supported to process critical data in heavy traffic  IP40-rated plastic housing   The EDS-2008-ELP series of industrial Ethernet switches have eight 10/100M copper ports and a plastic housing, which are ideal for applications that require simple industrial Ethernet connections. Moreover, to provide greater versatility for use with applications from different industries, the EDS-2008-ELP Series also allows users to enable or disable the Quality of Service (QoS) function, and broadcast storm protection (BSP) with DIP switches on the outer panel.. The EDS-2008-ELP Series has a 12/24/48 VDC single power input, DIN-rail mounting, and high-level EMI/EMC capabilities. In addition to its compact size, the EDS-2008-ELP Series has passed a 100% burn-in test to ensure it will function reliably after it has been deployed. The EDS-2008-ELP Series has a standard operating temperature range of -10 to 60°C.  

Uus! IPL-seade Braun Silk-expert Pro 5 PL5139 +FS1000 Kõige ohutum, kiirem ja efektiivsem IPL (fotoepilaator). Märgatav karvade vähenemine pärast neljanädalast kasutamist.* Põhiomadused Ainus SensoAdapt™tehnoloogiaga IPL-seade, mis hindab pidevalt teie nahatooni ja kohandab sellest lähtudes valgustugevust, et tagada parim tulemus. Ultra kiire. Vähem kui 5 minutit kulub jalgade hoolduseks (madalaima võimsusega). Braun Silk-expert Pro IPL-seade on ergonoomilise disainiga, stiilne, kompaktne, kerge ja käepärane. Tänu erilaadsele disainile mugav kasutada ka raskesti ligipääsetavates piirkondades. Ei vaja laadimist, geele ega lampe. Kliiniliselt testitud ja nahasõbralik. Seadme kasutuseaks on 400 000 välgatust, millest piisab terve keha hoolduseks kuni 20 aasta vältel. Ekstra täpsusotsik näo ja väiksemate nahapindade jaoks + Kosmeetikakott. + Gillette Venus raseerija. + Miniraseerija näole FS1000 *Efektiivsus tugineb ava suuruse, kiiruse ja energía kombinatsioonile. Ohutustehnoloogia on jagatud Cyden’iga. SensoAdapt™ tehnoloogia Kohandab automaatselt valgustugevuse optimaalseimaks, et tagada kõige ohutum ja tõhusam hooldus. Mitte ainult erinevate kehaosade nahatoon ei ole erinev, vaid sageli varieerub see ka ühel ja samal kehapiirkonnal. Eri nahatoonide puhul tuleb kasutada erineva tugevusega valgusenergiat. Mida tumedam nahk, seda rohkem energiat sellesse neeldub, mis võib omakorda põhjustada ebamugavustunnet. Braun Silk-expert Pro IPL-seade on ainus omataoline, millel on nutikas SensoAdapt™ sensor – viimane hindab pidevalt ehk enne iga välgatust (kuni 80 korda sekundis) nahatooni ja reguleerib selle järgi automaatselt valgustugevust. Nii jõuab nahani sobiva tugevusega valgus ning on tagatud tõhus ja ohutu hooldus. Mugavad hooldusrežiimid Tavarežiim sobib näiteks kätele, jalgadele, rinnakule ja seljale. Õrn ja eriti õrn seadistus võiks eelistada seadme esmakordsel kasutamisel või tundlikel piirkondadel, näiteks näo ja intiimpiirkonna hooldamisel. Sellel režiimil reageerib seade nahatooni muutumisele sama kiiresti ja täpselt kui tavarežiimil, kuid kiirgab lihtsalt nõrgemat valgust. Libistamisrežiim tagab kiire ja tõhusa hoolduse ning seda võiks eelistada suurte kehapiirkondade puhul (näiteks käed, jalad, rinnak ja selg). Seadme kasutamiseks sellel režiimil hoidke all hooldusnuppu ning liigutage seadet aeglaste ja sujuvate tõmmetega hooldatava kehapiirkonna ühest äärest teiseni. Vajutusrežiim sobib tundlikele või väikestele ja raskesti ligipääsetavatele kehapiirkondadele, näiteks põlved, sääred, pahkluud ja intiimpiirkond ning naistel kaenlaalused ja nägu. Seadme kasutamiseks sellel režiimil vajutage korraks hooldusnuppu. Seade teeb ühe välgatuse. Tõstke seade üles ja asetage juba hooldatud kohaga külgnevale uuele nahalapile. Kiireim IPL-hooldus Ainulaadne kooslus: tugev valgusenergia ja suur välgatuste kordumissagedus. Püsivad ja silmanähtavad tulemused kiirelt ja mugavalt. Braun Silk-expert Pro IPL-seade on ergonoomilise disainiga, stiilne, kompaktne, kerge ja käepärane. Seade on toitejuhtmega, et saaksite seda segamatult kasutada. Teil tuleb vaid seade vooluvõrku ühendada ja võite hooldusega alustada. Braun Silk-expert Pro IPL-seade on praegu müügil olevaist seadmeist kõige kiirema IPL-tehnoloogiaga – välgatuste vahe on vähem kui 0,9 sekundit, mis tähendab, et jalgade hoolduseks kulub keskmiselt 5 minutit. Braun Silk-expert Pro IPL-seade on unikaalse disainiga, et seda oleks mugav kasutada isegi raskesti ligipääsetavates piirkondades. Ei ole vaja laadimist, geele ega lampe. Seadme välklamp suudab teha 400 000 välgatust, mis võrdub umbes terve keha hooldusega 20 aasta vältel. Kasutamine kehal ja näol Nii on tagatud seadme ohutu kasutamine kehal ja näol. Braun Silk-expert Pro IPL-seade mõjub korraga 3 cm2 suurusele alale ning sel on sisseehitatud nahapuutesensor, mis tagab, et pulseerivat valgust kiiratakse ainult siis, kui seade on nahale väga lähedal. Et seade töötaks õigesti, peab otsak olema korralikult vastu nahka. Kui seade pole korralikult vastu nahka, annab sellest märku punane hoiatustuli. Ekstra täpsusotsik näo ja väiksemate nahapindade jaoks Braun Silk-expert Pro IPL-seade ei sobi kõigile. See on kõige tõhusam nahal, mille toon jääb heleda kuni keskmise tumeduse vahele, ning karvadel, mille värv jääb vahemikku loomulikust blondist kuni tumepruuni või mustani. Seade ei ole väga tõhus heleblondidel, punastel, hallidel ja valgetel karvadel, mis sisaldavad vähe melaniini ja ei neela seega valgusenergiat. Braun FS1000 Miniraseerija Braun on spetsiaalselt loodud näokarvade õrnaks ja stressivabaks eemaldamiseks – see on loodud, et saavutada sile nahk kiiresti kodus või liikvel olles. Kiire ja lihtne näokarvade eemaldamine. Eemaldage näokarvad hõlpsalt sellistest kohtadest nagu ülahuule kohal, lõug ja põsed. Ümar raseerimispea disain kohandub teie nahaga, muutes selle kiireks ja efektiivseks raseerijaks ka kõige keerulisemates piirkondades. Parema naha mugavuse saavutamiseks eemaldab pöördlõikesüsteem, mis on kaitstud võrguga, karvad õrnalt ja ohutult. Lõikab karvad naha lähedal, silub teie nägu ja loob aluse sujuvaks meigiks. Ühtlase tekstuuriga meigi jaoks. Sisse ehitatud Smartlight valgus teeb märgatavaks ka kõige väiksemad ja õhemad karvakesed, et tulemuseks oleks sujuv ja nahk puhas. Miniatuurne disain ja suurus – kaasas kandmiseks ja kasutamiseks teel olles. Hoidke miniraseerijat oma käekotis ja kasutage seda alati, kui vajadus ja igal pool. Proovi Braun’i toodet ja kui see mingil põhjusel teie ootustele ei vasta, saate selle eest saja päeva jooksul alates ostukuupäevast raha tagasi. Tutvu ka kampaania tingimustega ning täida kindlasti ära kampaania kupong.

Pimendav ruloo on ideaalne lahendus 100% valguse vähendamiseks. See muudab selle ideaalseks valikuks sissetuleva valguse blokeerimisel teie kodu või kontori igas toas. Ideaalne magamistoas! Ruloo tagakülg on kaetud termoplastilise hõbedase kihiga. See kiht mitte ainult ei blokeeri sissetulevat valgust, vaid selle soojusomadused hoiavad teie toa talvel soojemana ja suvel jahedamana. Tänu komplektis olevatele tarvikutele on ruloosid lihtne paigaldada ja kasutada. Kinnitage ruloo seinale või lakke kaasasolevate kruvide ja tüüblitega või riputage rulood akna ülaäärest. Keti saab paigaldada kas vasakule või paremale küljele. Pange tähele, et antud suurus on kanga suurus. Ülemise toru laius, k.a. kinnitustarvikud, on 3 cm laiemad kui ruloo. Tarne sisaldab 1 x 160 cm PVC plastist alumist põikpuud, 1 x 160 cm ülemine alumiiniumist toru, hõbedase peegeldava tagumise kattega 100% polüesterruloo, 2 x klambrit, 2 x kinnituskonksu, 1 x plastist pallkett, 4 x kruvi ja 4 x tüüblit. HOIATUS: väikesed lapsed võivad ennast toote küljes olevate rippnööri silmuste, kettide, lintide ja sisemiste nööridega puua. Hoidke nöörid poomise ja sissemässimise vältimiseks lastele kättesaamatus kohas. Nöörid võivad haakuda ümber lapse kaela. Liigutage voodid, turvahällid ja mööbel aknakatte nööridest eemale. Ärge siduge nööre omavahel kokku. Veenduge, et nöörid ei keerduks ega tekitaks silmust.• Tarne 5–7 päeva kõikjale Eestis • Turvalised maksemeetodid: Paypal, pangaülekanne, deebet- ja krediitkaardid, Trustly • Uhiuus toode. 2-aastane garantii sularahas kohaletoimetamise.Tasuta tarne ja tagastamine

i5-13600K Total Cores: 14 6 Performance-cores 8 Efficient-cores Total Threads: 20 Max Turbo Frequency: 5.10 GHz Performance-core Max Turbo Frequency: 5.10 GHz Efficient-core Max Turbo Frequency: 3.90 GHz Performance-core Base Frequency: 3.50 GHz Efficient-core Base Frequency: 2.60 GHz cache: 24 MB Intel® Smart Cache lithography: Intel 7 Processor Base Power: 125 W Maximum Turbo Power: 181 W sockets supported: FCLGA1700 Processor Graphics: Intel® UHD Graphics 770 Toetatud tehnoloogiad: Intel® Gaussian & Neural Accelerator 3.0 Intel® Thread Director Intel® Deep Learning Boost (Intel® DL Boost) Intel® Speed Shift Technology Intel® Turbo Boost Max Technology 3.0 Intel® Turbo Boost Technology 2.0 Intel® Hyper-Threading Technology Intel® 64 Instruction Set 64-bit Instruction Set Extensions Intel® SSE4.1, Intel® SSE4.2, Intel® AVX2 Idle States Enhanced Intel SpeedStep® Technology Thermal Monitoring Technologies Intel® Volume Management Device (VMD) Intel® Standard Manageability (ISM) Intel® Control-Flow Enforcement Technology Intel® AES New Instructions Secure Key Intel® OS Guard Intel® Trusted Execution Technology Execute Disable Bit Intel® Boot Guard Mode-based Execute Control (MBEC) Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Intel® VT-x with Extended Page Tables (EPT)

The Acer TravelMate Vero (TMV15-51) is an eco-friendly business laptop aimed at organizations which champion sustainable practices. A discrete TPM provides enterprise-level security and manageability, while a Kensington lock slot provides physical protection for important data. The TravelMate Vero also ships with Acer ProShield Plus, an all-in-one security solution which includes features like encryption and decryption, plus the biometric authentication measures built into Windows 11 Pro.

Traditsioonilise retsepti järgi valmistatud õlu. See õlu on tuntud omanäolise rikkaliku maitse ja humalate tugeva mõrkja maitse järgi. MEISTRITE GILDI pakub laias valikus õllesid, mille seas leidub lemmik igale maitsele. Traditsioonilised retseptid, õige pakend ja hind – need on parimad põhjused poes alati MEISTRITE GILDI valimiseks. MEISTRITE GILDI – tõeliselt mehelik õlu meestele! Hele õlu MEISTRITE GILDI „Kuldne“ Kirjeldus MEISTRITE GILDI KULDNE ON KVALITEETLAAGER. TÄNU 100% ODRALINNASTELE ON ÕLLEL SELGE, SÜGAVKULDNE VÄRVUS NING TÄIDLANE JA RIKKALIK MAITSE. EKSKLUSIIVNE „SELECT“ JA „BREWER’S GOLD“ HUMALASORTIDE SEGU ANNAB JOOGILE TIHEDA, KAUAPÜSIVA VAHU NING MEELDIVA AROOMI. Sisaldab odralinnaseid.

Traditsioonilise retsepti järgi valmistatud õlu. See õlu on tuntud omanäolise rikkaliku maitse ja humalate tugeva mõrkja maitse järgi. MEISTRITE GILDI pakub laias valikus õllesid, mille seas leidub lemmik igale maitsele. Traditsioonilised retseptid, õige pakend ja hind – need on parimad põhjused poes alati MEISTRITE GILDI valimiseks. MEISTRITE GILDI – tõeliselt mehelik õlu meestele! Hele õlu MEISTRITE GILDI „Pilsner“ 4,5% Kirjeldus MEISTRITE GILDI PILSNER ON KERGE JA KARGE HELE ÕLU. SELLEL ON MEELDIV HUMALAAROOM NING ÕRNALT MÕRKJAS, VÄRSKENDAV MAITSE. JAHE PILSNER ON SUUREPÄRANE JANUKUSTUTAJA NII PALAVAL SUVEPÄEVAL KUI MÕNUSAL SAUNAÕHTUL.