Otsing: fan controller (arhiveeritud tooted)

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator, assembled and ready to use This product has been tested for you: Tech-Review

The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space. The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod. The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without pump: approx. 56 x 67 x 198 mm Filling volume: approx. 150 ml Connection threads: G1/4 Compatible to the following pumps: - aquastream XT - Eheim 1046 and pumps identical in construction Scope of delivery: One Reservoir Three sealing screws G1/4 (preinstalled) Please note: Fittings and pump are not included in delivery, please order seperately.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator, assembled and ready to use

The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. Additionally, the graphic LC display can be used to display almost any information using the popular LCD software LCDHype. The key features of the aquaero 6 include: · Programmable four channel fan controller · Graphic LC display with backlight · USB 2.0 and aquabus interface · Four fan outputs with up to 30 Watt of power per channel · All fan outputs with 4-Pin plug, switchable to PWM control · Versatile control options · Eight temperature sensor inputs · Flow sensor input · Universal IR receiver · Output for IR transmitter · Three LED outputs · Potential-free switch · Two additional power outputs · Extensive alarm options · Acoustical alarm · Speed signal output for status evaluation · Expandable to a maximum of 12 fan channels Several aqua computer products can be used to expand the functionality of the aquaero 6 controller. These expansions are dynamically mapped into the menus and display pages of the aquaero, creating a consitent control system rather than individual devices. In maximum configuration, the following devices can be connected to an aquaero 6 simultaneously: 2x aquastream XT pumps 8x poweradjust 2/3 1x aquaero 5 LT (in this case only 4x poweradjust 2/3) 4x mps based devices (flow sensor, pressure/fill level sensor and D5 pump with aquabus) 2x farbwerk controller 1x Real Time Clock expansion module Scope of delivery: - aquaero 6 PRO controller - four temperature sensors, length approx. 70 cm - one internal USB cable, length approx. 100 cm - one connection cable for speed signal or aquabus - manual - mounting material for installation into a free extension bay

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator with reservoir and pump, assembled and ready to use

The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. Additionally, the graphic LC display can be used to display almost any information using the popular LCD software LCDHype. The key features of the aquaero 6 include: · Programmable four channel fan controller · Graphic LC display with backlight · USB 2.0 and aquabus interface · Four fan outputs with up to 30 Watt of power per channel · All fan outputs with 4-Pin plug, switchable to PWM control · Versatile control options · Eight temperature sensor inputs · Flow sensor input · Universal IR receiver · Output for IR transmitter · Three LED outputs · Potential-free switch · Two additional power outputs · Extensive alarm options · Acoustical alarm · Speed signal output for status evaluation · Expandable to a maximum of 12 fan channels Several aqua computer products can be used to expand the functionality of the aquaero 6 controller. These expansions are dynamically mapped into the menus and display pages of the aquaero, creating a consitent control system rather than individual devices. In maximum configuration, the following devices can be connected to an aquaero 6 simultaneously: 2x aquastream XT pumps 8x poweradjust 2/3 1x aquaero 5 LT (in this case only 4x poweradjust 2/3) 4x mps based devices (flow sensor, pressure/fill level sensor and D5 pump with aquabus) 2x farbwerk controller 1x Real Time Clock expansion module Scope of delivery: - aquaero 6 XT controller - aquaremote Infrarotfernbedienung - four temperature sensors, length approx. 70 cm - one internal USB cable, length approx. 100 cm - one connection cable for speed signal or aquabus - manual - mounting material for installation into a free extension bay

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator with reservoir and pump, assembled and ready to use

Das Upgrade Kit für Ihre "alte" aquastream Pumpe ( alle Revisionen) beinhaltet alle nötigen Teile, um Ihre vorhandene aquastream Pumpe auf den Funktionsumfang der aktuellen aquastream XT aufzurüsten. Einziger Unterschied nach dem Upgrade ist das Fehlen des in der Pumpe integrierten internen Wassertemperatursensors der aquastream XT. Dem Upgrade Kit auf die "Ultra" Version der aquastream XT liegt ein passender Temperatursensor bei, der an Stelle des internen Sensors angeschlossen werden kann. Der externe Temperatursensoreingang steht weiterhin zusätzlich zur Verfügung. Der im Lieferumfang enthaltene Pumpencontroller der aquastream XT kann wahlweise im hinteren Bereich direkt in der Pumpe montiert werden oder alternativ über die an der Platine vorhandenen Befestigungsbohrungen im PC-Gehäuse befestigt werden. Zur Montage im Pumpengehäuse wird zusätzlich ein neuer Gehäusedeckel für die Pumpe benötigt, der die entsprechenden Ausschnitte für die Stecker des Pumpencontrollers aufweist. Dieser Gehäusedeckel ist nur beim Upgrade Kit auf die "Ultra" Version im Lieferumfang enthalten und muß ggf. für die anderen Versionen separat erworben werden. Die genauen Ausstattungsmerkmale der Pumpensteuerung entnehmen Sie bitte der folgenden Aufstellung: Alle Versionen: - Microprozessorsteuerung mit laufoptimierter Ansteuerung der Pumpe und USB-Schnittstelle zur Kommunikation mit dem PC - kontinuierliche Messung von Versorgungsspannung, Stromaufnahme und der aufgenommenen Leitung - Tachosignalausgang mit parametrisierbaren Funktionen und Alarmfunktion - Entlüftungsprogramm - aquabus-Schnittstelle zur Verbindung mit anderen Aqua Computer Geräten Funktionsvergleich Standard Advanced Ultra Automatische Frequenzanpassung • • • Aquabus • • • Manuelle Frequenzanpassung • • • Entlüftungsmodus • • • Rotationserkennung • • • Konfigurierbarer Tachosignalausgang • • • Manuell konfigurierbarer Lüfterausgang - • • Externer Temperatursensor - - • Interner Wassertemperatursensor - - • (s. Text) Frei konfigurierbare Kalibierkurve - - • Temperaturgeregelter Lüfterausgang - - • Anschluss Durchflusssensor - - • Wichtig: Bei Einbau des Upgrade Kits in das Pumpengehäuse kann die Pumpe anschließend nicht mehr an ältere aquabays (vor September 2007) montiert werden, da der Stromversorgungsstecker zu weit aus der Pumpe herausragt. Mit den aktuell ausgelieferten aquabays besteht dieses Problem nicht. Lieferumfang: 1x Controllerplatine aquastream XT mit freigeschaltetem Funktionsumfang je nach bestellter Version 1x internes USB-Anschlusskabel, ca. 90 cm 1x Schrumpfschlauchzuschnitt zur Modifizierung des vorhandenen Pumpenrades 1x rückseitiger gelber Gehäusedeckel (nur "Ultra" Version!) 1x Temperatursensor, ca. 70 cm (nur "Ultra" Version!) Befestigungsmaterial deutschsprachige Montageanleitung Hinweis: Ein Kabel zum Verbinden der Aquastreampumpe mit dem Aquaero ist im Lieferumfang der Pumpe enthalten.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator, assembled and ready to use

All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 450 ml and 880 ml variants has an outer diameter of 75 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel tube. As a optical highlight, a fountain effect can be realized. If the return line is connected to the center connector of the reservoir, the water flows through the stainless steel tube to the top of the reservoir, where it is ejected through eight nozzles. In combination with illumination, this is a real eye catcher effect. A thin acrylic plate near to the bottom of the reservoir reduces air ingestion to a minimum. Alternatively, the return line can be connected to a lateral connector of the reservoir, the water then exits directly from the base part. For this configuration, a deflector plate is included in delivery to ensure can be installed to effectively remove air from the water circuit. The aqualis PRO 450/880 ml variants additionally feature an acrylic window in the base part and up to six LEDs (5 mm size) can be installed into the base part. The PRO variants can be upgraded with an electronic fill level sensor at a later date. The aqualis XT 450/880 ml variants feature the same acrylic window and LED mounting as the PRO variants. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5/6 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All variants are also available with nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details Dimensions without stainless steel bracket: approx. 80 x 80 x 190 mm Filling volume: approx. 450 ml Connection threads: G1/4 Scope of delivery One Reservoir One stainless steel bracket One stainless steel deflector plate Two sealing screws G1/4 (preinstalled) Monting material Please note Fittings are not included in delivery, please order seperately.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator, assembled and ready to use

All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 100 ml and 150 ml variants has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel rod. A deflector plate is installed above the return channel into the reservoir to effectively remove air from the water circuit. The aqualis XT 100/150 ml variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All 100 ml and 150 ml variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without stainless steel bracket: approx. 50 x 50 x 130 mm Filling volume: approx. 100 ml Connection threads: G1/4 Scope of delivery: One Reservoir One stainless steel bracket Two sealing screws G1/4 (preinstalled) Monting material Please note: Fittings are not included in delivery, please order seperately.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator with reservoir and pump, assembled and ready to use

All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 100 ml and 150 ml variants has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel rod. A deflector plate is installed above the return channel into the reservoir to effectively remove air from the water circuit. The aqualis XT 100/150 ml variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All 100 ml and 150 ml variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without stainless steel bracket: approx. 50 x 50 x 144 mm Filling volume: approx. 100 ml Connection threads: G1/4 Scope of delivery: One Reservoir One stainless steel bracket One sealing screw G1/4 (preinstalled) One pressure equalisation membrane (preinstalled) One internal USB connection cable Monting material Please note: Fittings are not included in delivery, please order seperately.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator, assembled and ready to use

All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 100 ml and 150 ml variants has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel rod. A deflector plate is installed above the return channel into the reservoir to effectively remove air from the water circuit. The aqualis XT 100/150 ml variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All 100 ml and 150 ml variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without stainless steel bracket: approx. 50 x 50 x 175 mm Filling volume: approx. 150 ml Connection threads: G1/4 Scope of delivery: One Reservoir One stainless steel bracket Two sealing screws G1/4 (preinstalled) Monting material Please note: Fittings are not included in delivery, please order seperately.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator, assembled and ready for use Awards:

All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 100 ml and 150 ml variants has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel rod. A deflector plate is installed above the return channel into the reservoir to effectively remove air from the water circuit. The aqualis XT 100/150 ml variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All 100 ml and 150 ml variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without stainless steel bracket: approx. 50 x 50 x 144 mm Filling volume: approx. 100 ml Connection threads: G1/4 Scope of delivery: One Reservoir One stainless steel bracket One sealing screw G1/4 (preinstalled) One pressure equalisation membrane (preinstalled) One internal USB connection cable Monting material Please note: Fittings are not included in delivery, please order seperately.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator, assembled and ready for use

All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 100 ml and 150 ml variants has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel rod. A deflector plate is installed above the return channel into the reservoir to effectively remove air from the water circuit. The aqualis XT 100/150 ml variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All 100 ml and 150 ml variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without stainless steel bracket: approx. 50 x 50 x 175 mm Filling volume: approx. 150 ml Connection threads: G1/4 Scope of delivery: One Reservoir One stainless steel bracket Two sealing screws G1/4 (preinstalled) Monting material Please note: Fittings are not included in delivery, please order seperately.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator with reservoir and pump, assembled and ready to use

All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 100 ml and 150 ml variants has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel rod. A deflector plate is installed above the return channel into the reservoir to effectively remove air from the water circuit. The aqualis XT 100/150 ml variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All 100 ml and 150 ml variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without stainless steel bracket: approx. 50 x 50 x 130 mm Filling volume: approx. 100 ml Connection threads: G1/4 Scope of delivery: One Reservoir One stainless steel bracket Two sealing screws G1/4 (preinstalled) Monting material Please note: Fittings are not included in delivery, please order seperately.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator, assembled and ready to use

All reservoirs of the aqualis series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube of the 450 ml and 880 ml variants has an outer diameter of 75 mm and a wall thickness of 5 mm. Base and top of the aqualis reservoirs are made from Delrin and connected by a stainless steel tube. As a optical highlight, a fountain effect can be realized. If the return line is connected to the center connector of the reservoir, the water flows through the stainless steel tube to the top of the reservoir, where it is ejected through eight nozzles. In combination with illumination, this is a real eye catcher effect. A thin acrylic plate near to the bottom of the reservoir reduces air ingestion to a minimum. Alternatively, the return line can be connected to a lateral connector of the reservoir, the water then exits directly from the base part. For this configuration, a deflector plate is included in delivery to ensure can be installed to effectively remove air from the water circuit. The aqualis PRO 450/880 ml variants additionally feature an acrylic window in the base part and up to six LEDs (5 mm size) can be installed into the base part. The PRO variants can be upgraded with an electronic fill level sensor at a later date. The aqualis XT 450/880 ml variants feature the same acrylic window and LED mounting as the PRO variants. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All variants are also available with nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without stainless steel bracket: approx. 80 x 80 x 300 mm Filling volume: approx. 880 ml Connection threads: G1/4 Scope of delivery: One Reservoir One stainless steel bracket One stainless steel deflector plate Two sealing screws G1/4 (preinstalled) Monting material Please note: Fittings are not included in delivery, please order seperately.

The airplex modularity system is a fully modular radiator system for water cooling systems and shows competence and know-how of the 10 years of company history at Aqua Computer. The most important features of the airplex modularity summarized: - Fully modular system - Extremely high cooling performance - Very compact - shorter than most other radiators for the same fan site and only 146mm wide - Indefinitely expandable in all dimensions - No solder residue due to solder-free manufacturing - Completely demountable for thorough cleaning - System with multiple loops possible in one radiator - Optimal flow / parallel tubing - No lacquer coating for perfect thermal transfer - Pump modules with reservoir available - Many colours for side panel available (Brushed stainless steel, black aluminium, blue, red) - Fins optimized for low fan speeds and excellent passive cooling performance - No ignoble materials in contact with the coolant, only copper and stainless steel - CC-manufactured components made from Delrin and stainless steel - Highest precision on the individual components ensures easy mounting - Riveted-in threads for fan mounting - Large range of accessories available (Reservoirs, pump modules, feet, filter, sensors, ...) - Tested for pressures of up to 0,8 bar - Copper fins available for maximum performance in compact dimensions The system is based on a fin package with 21 copper tubes and pressed-on stainless steel flanges. On both sides of the fin package Delrin terminals are integrated. These terminals create a safe seal with the stainless steel flanges with a gasket ring and are screwed together. The Delrin terminals have integrated connection terminals which are lowered from the surface and have a round spacing above the thread. This spacing allows a connection adaptor to be pushed in two connect two radiator modules directly without any tubing pieces. The orientation of the radiator to each other determines the flow direction of the coolant: When connected side by side the connected radiators are connected serially, horizontally stacked radiators create a parallel flow set-up. Additionally the system can also grow in length indefinitely. For this the fin packages are connected via optional Delrin connection modules. Radiators in all lengths use the same Delrin Terminals, only the side panels and fin packages are different, hence by buying the components, a radiator can be rebuilt and modified. All sizes have a width of 146mm and hence fit perfetly into 5.25". The height of the radiator in standard configuration (without the pump module) is 63.5mm and the length is 44mm longer than the according fan (e.g. 3x120mm fans -> Length is 360+44mm = 404mm). The connection threads are G1/4" in size and all 1/4" fittings from our shop can be used with the system. With the airplex modularity system. It is now possible for the first time to operate two separate loops in one radiator with the airplex modularity system. On radiators operated this way the cooling surface is split approximately at a 70:30 ratio between the primary respective secondary loop. This allows extremely compact two-loop cooling systems, to allow e.g. separate cooling of the heat-sensitive HDDs from the CPU and graphics card. The two cooling loops are completely separated from each other, mixing of the coolant is completely impossible. By equipping the system with an optional pump module an extremely compact and easy to handle water cooling system can be realized. The offered radiators with pump module have the reservoir and pump already integrated directly into the Delrin terminal of the radiator. Depending on the type it even features an USB fan controller with water temperature measuring and optionally flow meter and/ or water filter. An especially interesting feature is the Compact 600 pump module in the 12V version: It is equipped with the proven ceramic bearing from Aqua computer and allows whisper-quiet operation as well as many monitoring and control options via the integrated pump controller with USB interface. Mounting of a flow sensor and filter is easily possible and can be done quickly and hassle-free. Extent of delivery: One radiator, assembled and ready to use

This flow rate sensor from aquacomputer has an extremely low flow resistance and is therefore perfectly suited even for High-flow systems. The Sensor is made from Delrin and stainless steel and is therefore not only technically but also optically exceptionally well-made. The symmetrical design with two identical nozzles allows integration into the system without having to use a certain direction of flow through the sensor. The connection threads are G1/4" in size and therefore allow the use of the sensor with all common fitting and hose sizes and types. The sensor also has four M3 threads integrated into the bottom of the casing to allow easy fixation. The sensor provides accurate data from 40l/h and is therefore perfect for systems with aquastream pumps. Please note the right calibration setting of 169 pulses per liter! Compatibility list: aquaero 5 XT / PRO / LT aquaero 4.00 USB fan controller in all display versions aquaero LT 4.00 USB fan controller aquaero 3.07 USB fan controller in all display versions aquaero LT 3.07 USB fan controller poweradjust USB poweradjust USB Version LT aquastream XT USB Ultra version aquaduct 240 Pro mark III aquaduct 360 eco+ but also: Alphacool Heatmaster Alphacool Heatmaster 2 Innovatek Fan-O-Matic PRO LCD Display FanController T-Balancer/bigNG Extent of delivery: One flow rate sensor Technical details: Connection thread size: G1/4", shipped without fittings! For interpretation of the data from this sensor additional components (see compatibility list above) as well as a suitable connection cable (Art.No.: 71044, not included) are required! This product has been reviewed for you: hw-lab (engl.) Xpert-OC-Team

The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space. The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod. The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without pump: approx. 58 x 67 x 153 mm Filling volume: approx. 100 ml Connection threads: G1/4 Compatible to the following pumps: - aquastream XT - Eheim 1046 and pumps identical in construction Scope of delivery: One Reservoir Two sealing screws G1/4 (preinstalled) One pressure equalisation membrane (preinstalled) One internal USB connection cable Please note: Fittings and pump are not included in delivery, please order seperately.

Mounted on an aquaero 6 controller, this passive heat sink improves heat dissipation and thereby increases the maximum power output of the fan channels. For optional active cooling, the aquaero 5 water block (art. no. 20023) can be installed on top of the passive heat sink. Passive heat sink and Real Time Clock module (art. no. 70215) can be installed simultaneously, additional mounting material is included in delivery of the passive heat sink. Scope of delivery: Aluminum heat sink for aquaero 6 Thermally conductive pad Mounting material Compatible with: aquaero 6 PRO (70227) aquaero 6 XT (70028) aquaero 6 LT (1013416 Please note: aquaero 6 and water block are not included in delivery! If using the water block that has no second respectively narrower bump (very old version) washers must be used for mounting it.

The poweradjust 3 is a versatile single channel fan or pump controller that can also be used as an aquabus expansion device for an aquaero 5 or aquaero 6 unit. Mainly designed for Laing DDC and D5 pumps as well as powerful fans, the poweradjust can be used for controlling a variety of devices with up to 30 Watts (up to 36 Watts with optional passive heat sink) at 12 Volt DC. For example, a single poweradjust 3 unit (ultra version) can be used for temperature dependent control of nine airstream fans on an airplex evo 1080 radiator. Short term peak loads can be up to 54 Watts to accommodate high start-up currents caused by pumps and fans. A programmable start burst can be used to ensure pumps are supplied with enough power during start-up, the start burst may also be triggered if a missing speed or flow signal is detected. The poweradjust 3 features the same connectivity options as the poweradjust 2 predecessor. These are a power output with speed signal input, USB interface, temperature sensor input, flow sensor input, speed signal output as well as an aquabus interface for connection to an aquaero 5 or aquaero 6 unit. The main new feature compared to the poweradjust 2 predecessor is a new power output design in switching power supply technology, greatly improving efficiency and thereby reducing waste heat of the poweradjust 3 unit. In addition to the manual control option of the standard version, the external temperature sensor input can be used for output power regulation in the ultra version devices. Temperature control options are mainly derived from the aquastream XT series and can be adjusted to personal needs. The temperature control option is the only difference between standard and ultra version. The poweradjust 3 also features electronics temperature monitoring to avoid damage to the unit. Various configurable alarm settings regarding temperature, flow and speed signal can be used to prevent damage to your PC due to component failures or inadequate cooling. Features: - DC output, no PWM - Programmable start burst - Continuous speed signal checking and start burst repetition upon speed signal failure - Fixed power or fixed speed settings, for ultra version additionally temperature control - Speed signal output can be used to forward fan/pump speed signal or as a generic speed signal for alarm forwarding - Input for a temperature sensor - Input for a flow sensor - Two aquabus connectors - USB interface for PC communication - Comfortable software for configuration and monitoring of the poweradjust 3 unit, fully integrated into the aquasuite software Scope of delivery: 1x poweradjust 3 USB board 1x Connection cable for Laing DDC pumps 1x Internal USB cable (5pin), length ca. 70 cm 1x Speed signal cable 1x Manual

The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space. The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod. The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube. Technical details: Dimensions without pump: approx. 58 x 67 x 198 mm Filling volume: approx. 150 ml Connection threads: G1/4 Compatible to the following pumps: - aquastream XT - Eheim 1046 and pumps identical in construction Scope of delivery: One Reservoir Two sealing screws G1/4 (preinstalled) One pressure equalisation membrane (preinstalled) One internal USB connection cable Please note: Fittings and pump are not included in delivery, please order seperately.

The poweradjust 3 is a versatile single channel fan or pump controller that can also be used as an aquabus expansion device for an aquaero 5 or aquaero 6 unit. Mainly designed for Laing DDC and D5 pumps as well as powerful fans, the poweradjust can be used for controlling a variety of devices with up to 30 Watts (up to 36 Watts with optional passive heat sink) at 12 Volt DC. For example, a single poweradjust 3 unit (ultra version) can be used for temperature dependent control of nine airstream fans on an airplex evo 1080 radiator. Short term peak loads can be up to 54 Watts to accommodate high start-up currents caused by pumps and fans. A programmable start burst can be used to ensure pumps are supplied with enough power during start-up, the start burst may also be triggered if a missing speed or flow signal is detected. The poweradjust 3 features the same connectivity options as the poweradjust 2 predecessor. These are a power output with speed signal input, USB interface, temperature sensor input, flow sensor input, speed signal output as well as an aquabus interface for connection to an aquaero 5 or aquaero 6 unit. The main new feature compared to the poweradjust 2 predecessor is a new power output design in switching power supply technology, greatly improving efficiency and thereby reducing waste heat of the poweradjust 3 unit. In addition to the manual control option of the standard version, the external temperature sensor input can be used for output power regulation in the ultra version devices. Temperature control options are mainly derived from the aquastream XT series and can be adjusted to personal needs. The temperature control option is the only difference between standard and ultra version. The poweradjust 3 also features electronics temperature monitoring to avoid damage to the unit. Various configurable alarm settings regarding temperature, flow and speed signal can be used to prevent damage to your PC due to component failures or inadequate cooling. Features: - DC output, no PWM - Programmable start burst - Continuous speed signal checking and start burst repetition upon speed signal failure - Fixed power or fixed speed settings, for ultra version additionally temperature control - Speed signal output can be used to forward fan/pump speed signal or as a generic speed signal for alarm forwarding - Input for a temperature sensor - Input for a flow sensor - Two aquabus connectors - USB interface for PC communication - Comfortable software for configuration and monitoring of the poweradjust 3 unit, fully integrated into the aquasuite software Scope of delivery: 1x poweradjust 3 USB board 1x Connection cable for Laing DDC pumps 1x Internal USB cable (5pin), length ca. 70 cm 1x Speed signal cable 1x Manual

The Aqua Computer pump adapter for D5 pumps is manufactured from durable Delrin. The adapter can either be used as a stand-alone pump adapter or in combination with a compatible aqualis series reservoir. A mounting bracket made from stainless steel is included in delivery, an optional decoupling set can also be used (not included in delivery). For mounting a D5 series pump, an anodized aluminum clamp ring and a suitable o-ring gasket are provided. When used with an aqualis series reservoir (art. no. 45324 or 45325), pump adapter and reservoir form a virtually seamless unit. The sockets at the base of the reservoir slide into form-fitting receptables of the pump adapter and the gaskets on the sockets establish a watertight seal. When used with a reservoir, the threads on the side of the pump adapter must be used to connect the water loop. Additionally, a fill level sensor of the mps series is integrated into the pump adapter. The fill level sensor features an integrated microcontroller with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the flow sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. A pressure equalisation membrane is included in delivery of the pump adapter and is to be installed into the top port of the reservoir. When used without an aqualis series reservoir , the fill level sensor is not operational! G1/4 threads for fittings can be used on the top and side of the pump adapter. Unused threads can be sealed with two G1/4 sealing screws supplied with the pump adapter. Compatibility list for aquabus interface: aquaero 5 XT (Art. 70213 und 70173) aquaero 5 PRO (Art. 70174) aquaero 5 LT (Art. 70175) Compatibility list for external temperatue sensor input: Temperature sensor inline G1/4 (art. 71162) Temperature sensor inner/outer thread G1/4 (art. 71160) Temperature sensor 50 cm (art. 71005) Scope of delivery: Pump adapter Clamp ring O-ring gasket Stainless steel bracket Pressure equalisation membrane with G1/4 thread Internal USB cable Mounting material Two G1/4 sealing screws Compatible with: Aqua Computer D5 pump motor with speed signal (art. no. 49118) Aqua Computer D5 pump motor with USB and aquabus interface (art. no. 41120) Laing D5 series pumps and OEM versions identical in construction aqualis base for pump adapters (art. no. 45325) aqualis base for pump adapters with nano coating (art. no. 45324) Please note: Pump, fittings and reservoir are not included in delivery!

Full-cover water cooler for NVIDIA RTX 2080 graphics cards according to reference design, compatible with SLI NVLink bridges. The cooler base, milled from a solid copper block, covers the entire board of the graphics card and is in contact with all components to be cooled. In the GPU area, a stainless steel jet plate ensures optimum cooling performance, while wide channels in other areas of the cooler guarantee low flow resistance. The lid of the cooler is made of acrylic glass and is reinforced by a black anodized aluminum frame. For illumination, 15 individually addressable RGBpx LEDs are integrated into the cooler, which can be connected to an Aqua Computer device with RGBpx output or a motherboard with compatible output. The kryographics NEXT series adopts proven features of the kryographics series: Relevant contact surfaces are mirror polished for optimum heat transfer. Direct contact to GPU and RAM, high-quality thermal pad for other components such as voltage regulators included. All mounting threads are equipped with metal spacers for easy mounting. Connection thread G1/4 optionally usable from both sides, two screw plugs included. Interchangeable connection terminal. Full compatibility with kryographics connection terminals with VISION module and kryoconnect SLI connectors. Compatible products for integrated RGBpx lighting: All Aqua Computer products with RGBpx output, e.g. Quadro fan controller Mainboards of the manufacturer ASUS with connection possibility for addressable RGB-LEDs Materials: Body: Copper Cover: Acrylic glass Frame: Anodised aluminium Jetplate: stainless steel Connection terminal: acetal Included in delivery: Cooler without connections (thread G1/4) Two screw plugs G1/4 Thermal Grizzly Kryonaut heat conducting paste, approx. 0.5 gram in syringe plastic spatula thermal pad fixing material RGBpx connection cable 50 cm RGBpx connection cable for ASUS mainboards with connection option for addressable RGB LEDs Notice: Delivery without graphics card. The cooler is supplied without fittings, please order suitable fittings separately.

The pressure sensors of the mps pressure series can be useful for a variety of situations. Foremost they can be used as fill level sensors for virtuelly any type and size of reservoir. In this configuration, the sensor detects the pressure generated by the water column inside the reservoir. The sensor must be installed on the same height or lower than the bottom of the reservoir and one port of the sensor ist connected to one of the bottom inlets of the reservoir. Additionally, either the second port of the sensor has to be connected to a top port of the reservoir or a pressure equalisation membrane has to be installed in a top port of the reservoir. Fittings and membrane are not included in delivery and have to be bought seperately! Another field of application is differential pressure measurement across filter elements to monitor residues and clogging as a much more precise maintenance indicator than optical inspection. Accordingly, residues and clogging in micro structure coolers can be monitored. A differential pressure measurement between inlet and outlet of a pump can be used for operation monitoring and provide valuable information for hardware testers. All mps pressure sensors feature an integrated microcontroller with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the flow sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Pressure and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors. At the moment, four versions of the mps pressure sensor are available that differ in pressure range. Please select the sensor best fitting your requirements: mps pressure Delta 40 (art. 71220): Differential pressure sensor with two ports, range 0 - 40 mbar (corresponding to a water column of approx. 0 - 40 cm) mps pressure Delta 500 (art. 71218): Differential pressure sensor with two ports, range 0 - 500 mbar (corresponding to a water column of approx. 0 - 500 cm) mps pressure Delta 1000 (art. 71249): Differential pressure sensor with two ports, range 0 - 1000 mbar (corresponding to a water column of approx. 0 - 1000 cm) Compatibility list for aquabus interface: aquaero 6 XT (Art. 70028) aquaero 6 PRO (Art. 70027) aquaero 5 XT (Art. 70213) aquaero 5 PRO (Art. 70174) aquaero 5 LT (Art. 70175) Compatibility list for external temperatue sensor input: Temperature sensor inline G1/4 (art. 71162) Temperature sensor inner/outer thread G1/4 (art. 71160) Scope of delivery: One flow sensor One internal USB cable Technical details: Dimensions without fittings and without cables: approx. 47 x 34 x 21 mm Connection thread(s) M5, fittings not included! Distance approx. 12 mm Mounting threads: 2x M3, distance 24 mm

Full-cover water cooler for NVIDIA RTX 2080 graphics cards according to reference design, compatible with SLI NVLink bridges. The cooler base, milled from a solid copper block, covers the entire board of the graphics card and is in contact with all components to be cooled. In the GPU area, a stainless steel jet plate ensures optimum cooling performance, while wide channels in other areas of the cooler guarantee low flow resistance. The lid of the cooler is made of acrylic glass and is reinforced by a black anodized aluminum frame. For illumination, 15 individually addressable RGBpx LEDs are integrated into the cooler, which can be connected to an Aqua Computer device with RGBpx output or a motherboard with compatible output. The kryographics NEXT series adopts proven features of the kryographics series: Relevant contact surfaces are mirror polished for optimum heat transfer. Direct contact to GPU and RAM, high-quality thermal pad for other components such as voltage regulators included. All mounting threads are equipped with metal spacers for easy mounting. Connection thread G1/4 optionally usable from both sides, two screw plugs included. Interchangeable connection terminal. Full compatibility with kryographics connection terminals with VISION module and kryoconnect SLI connectors. Compatible products for integrated RGBpx lighting: All Aqua Computer products with RGBpx output, e.g. Quadro fan controller Mainboards of the manufacturer ASUS with connection possibility for addressable RGB-LEDs Materials: Basic body: Copper, nickel-plated Cover: Acrylic glass Frame: Anodised aluminium Jetplate: stainless steel Connection terminal: acetal Included in delivery: Cooler without connections (thread G1/4) Two screw plugs G1/4 Thermal Grizzly Kryonaut heat conducting paste, approx. 0.5 gram in syringe plastic spatula thermal pad mounting material RGBpx connection cable 50 cm RGBpx connection cable for ASUS mainboards with connection option for addressable RGB LEDs Notices: Delivery without graphics card. The cooler is supplied without fittings, please order suitable fittings separately.

The "farbwerk 360" is a powerful RGB effect controller for up to 360 addressable LEDs, compatible to the Aqua Computer RGBpx product line. RGBpx controller for up to 360 addressable LEDs Each of the four RGBpx channels of the farbwerk 360 can control 90 addressable LEDs independently. Color and brightness can be individually controlled for each LED. In total, up to 20 groups of LEDs of varying size can be configured, and visual effects can be assigned to each group. The 23 available effects can be extensively adjusted for further customization. Many effects can also be configured to modify effect parameters (for example speed) depending on current sensor data. The available effects also include sound-to-light effects, visualizing computer sound output. The AMBIENTpx effect deserves special notice, replicating the border area of the current monitor display on connected LEDs, allowing for an impressive background lighting surrounding the monitor. Each of the 20 configured effect controller can be assigned to multiple areas of the connected LEDs up to a total of 60 assignments combined - perfectly suited to illuminate multiple fans identically for example. Transparency and effect overlay Additional to defining colors, transparency can be defined in the effect controllers of the farbwerk 360. If multiple transparent effects are defined for a LED or a range of LEDs, the result will be an overlay of the assigned colors. Profile management An extensive profile management can be used to switch effectively between different configurations. Four profiles are available, the configured effects (and areas of LEDs respectively) can be freely assigned to each of the profiles. The active profile can be set manually or automatically depending on sensor values or depending on applications currently running on the PC. For example, distinctive lighting settings can easily be configured for office use and gaming, with automatic activation of the gaming setting the moment the game is stated. As sensor values, the four temperature sensor inputs and the flow sensor input as well as sensor data from the Aqua Computer Hardware Monitoring is available, enabling automatic profile selection depending on CPU load or CPU temperature for example. Autonomous operation The farbwerk 360 is an autonomous device with an embedded micro processor and can be operated without a PC. The configuration is stored in the device itself, a multitude of functions can be used without connection to a PC. Compatible with third party LED products Alternatively to the LED strips offered by Aqua Computer, LED fans made by Corsair and NZXT can be connected using the optional accessory RGBpx Splitty4 (item code 53267, not included in delivery). Technical details Controller for addressable LEDs four channels for up to 90 LEDs each 20 configurable effect controllers four configurable profile settings four temperature sensor inputs one flow sensor input 16 software sensors for transmitting sensor values from the PC to the device USB 2.0 interface power supply input 5 V DC, max. current 8 Amps Scope of delivery 1x farbwerk 360 2x RGBpx LED strip 32 cm, width 10 mm, 15 addressable LEDs 2x RGBpx cable, length 50 cm 1x internal USB cable (5 pins), length approx. 1 m 1x manual System requirements - Windows 8.1 or newer - Internal USB 2.0 port

The Alphacool Eisball reservoir with integrated pump top presents itself in a unique way. A spherical reservoir has never been seen before and it opens countless new possibilities, especially in the field of modding. From static single colour lighting to maybe an R2D2 mod: there are really no limits to your creativity. Another special feature of this version: The pump is already pre-installed. Alphacool uses the proven Eispump VPP755 V3. Unique design and excellent lighting In contrast to conventional reservoirs, the Alphacool Eisball has an unprecedented spherical design. The 22 digital RGB LEDs run completely around the equator of the Eisball in a chrome ring. These provide versatile lighting effects as well as your standard colours. Of course, the device comes with a Digital RGB Controller with which enables you to customize the style and lighting of your Eisball. Versatile mounting options Don't let yourself be limited to a single mounting option! The included adhesive mat and 2 different mounting plates gives you many mounting options: whether on the radiator, the fan slots, or a 2.5" SSD slot you’re covered. Alternatively, the proven universal Alphacool pump mounting can also be used. In combination with the VPP755, the Alphacool Eisball can even be operated upside down. But only and exclusively with the Alphacool VPP755 pump. Standard Laing D5 pumps cannot be operated upside down due to the spherical bearing. Where is the pump? The pump disappears completely inside the Eisball. It is inserted into the Eisball from below and fastened with a special pump holder. All Alphacool's own D5 style pumps such as the VPP655 and VPP755 as well as all original Laing D5 pumps are suitable for installation. Is the Eisball Silent Suitable? With the Eisball, the pump is completely inside the reservoir, and is therefore surrounded by the water. The water acts as additional noise insulation. The enclosed decouplers also reduce the transmission of vibrations to a minimum. All in all, a real Silent product! Disclaimer: In combination with the VPP755, the Alphacool Eisball can even be operated upside down. But only and exclusively with the Alphacool VPP755 pump. Standard Laing D5 pumps cannot be operated upside down due to the spherical bearing. Technical data: WxDxH: 117.51 x 128 x 128 mm WxDxH with mounting Material and decoupler: 130.01 x 128 x 128 mm Net weight: 510 g Maximum working temperature: 60 °C Material Eisball: transparent nylon Material pump holder: Acetal Material Digital RGB Ring: Acetal colour Eisball: transparent Colour Digital RGB Ring: Chrome Connections: IN 1x G1/4" / OUT 1 x G1/4" Fillport: 1 x G1/4" Capacity: 700 ml Digital RGB connector: 4-pin Voltage Digital RGB: 5 VDC Download manual PDF: Alphacool Eisball Digital RGB (ink. Eispumpe VPP755 V.3) Download data sheet PDF: Alphacool Eisball Digital RGB - Plexi (ink. Eispumpe VPP755 V.3)

The "farbwerk nano" is a powerful RGB effect controller for controlling up to 90 addressable LEDs, compatible with the Aqua Computer RGBpx product line. RGBpx controller for up to 90 addressable LEDs The farbwerk nano can control 90 addressable LEDs. Each LED can be individually adjusted in color and brightness. A total of 20 LED groups of variable size can be configured, to which visual effects can be assigned. The 23 available effects offer extensive adjustment options for further individualization. Many effects also offer the option of modifying effect parameters (e.g. speed) depending on current sensor values. The available effects also include sound-to-light effects that react to the sound currently output by the computer. An outstanding feature is the AMBIENTpx effect, which allows the edge areas of the current screen content to be reproduced on the connected LEDs, thus creating a very effective backlight around the computer screen. The up to 20 configured effects can also be assigned several times, a total of 60 assignments are possible - perfect for illuminating several fans identically, for example. Transparency and effect overlay The nano inking unit allows you to define transparency in addition to ink settings. If several transparent effects are simultaneously assigned to an LED or a section, the colors are superimposed accordingly. Profile management A comprehensive profile management allows fast switching between different configurations. Four profiles are available to which the configured effects or LED sections can be freely assigned. The selection of the active profile can be done manually as well as automatically on the basis of sensor values or started applications on the PC. For example, it is easy to switch between office operation and gaming with completely different PC lighting. Both the ambient brightness sensor of the farbwerk nano and data from the Aqua Computer hardware monitoring are available as sensor values, so that a profile selection can also be made, for example, on the basis of CPU load or CPU temperature. Autonomous operation The inking unit nano works autonomously with its own microprocessor and can also be operated independently of a PC. The configuration of the inking unit nano is stored in the device, a multitude of functions is also available without connection to the PC. Compatible with third-party lighting products As an alternative to the LED strips offered by Aqua Computer, Corsair and NZXT LED fans can also be used for lighting effects using the RGBpx Splitty4 product (item 53267, not supplied). Technical details Controller for addressable LEDs one channel for up to 90 LEDs 20 configurable effect controllers Four configurable setting profiles Intelligent pushbutton with three functions: Strip on/off, profile selection, brightness adjustment ambient light sensor 16 software sensors for the transfer of sensor data from the PC to the device USB 2.0 interface Power supply 5 V DC via USB, current consumption max. 0.5/2 A (configurable) Included in delivery 1x inking unit nano 1x RGBpx LED-Strip 32 cm, width 10 mm, 15 addressable LEDs 1x RGBpx connection cable, length 50 cm 1x internal USB connection cable (5-pin), length approx. 1 m 4x cable clip, black 1x instruction

P7-H1 (Project7-Hub1) Changes the color scheme and the lighting modes of the RGB fans. Is compatible with either 4-pin and 3-pin connectors The P7-H1 does not control fan speed but allows to monitor fan RPM RGB STRIP LIGHTING Synchronizes all Aerocool RGB products and ohter RGB 4-pin compatible products RGB SOFTWARE 16.8 million colors with three LED lighting modes including solid color, breathing, and pulsating. Set your color by entering RGB color code (HTML code). MONITOR FAN RPM Monitors RPM of up to five fans compatible with either 4-pin or 3-pin connectors through the P7-H1 (Project7- Hub1) Technical Details Model Name P7-H1 (Project 7-Hub1) Main Function Sets RGB colors, LED modes and monitors fan speeds Connector 9-Pin USB 2.0 LED Output 2 Connectors (Expandable) LED Output (Watt) Up to 24 Watts Fan Output 5 Connectors Fan Output (Watt) Up to 18 Watts System Compatibility Windows 7 and Newer Versions Software Enabled LED Light Control Accessories Velcro Strap x 1; Screw x4; Black Zip Tie x 4

Der Bykski RTX 2080 Asus Strix GPU Kühler Der Bykski RTX 2080 Asus Strix GPU Kühler ist ein leistungsstarker komplett Grafikkarten-Kühler für die Asus Strix 2080. Die groß angelegten Kanäle und verbesserte Anströmung, sorgen für eine effiziente Kühlung der GPU, Spannungswandler und Speicher der Grafikkarte. Der vernickelte Kühlkörper aus Vollkupfer wird durch einen Acrylglas Deckel transparent verdeckt und sorgt so für ein edles Erscheinungsbild des Grafikarten-Kühlers. Der Anschlussterminal des Kühlers verfügt über vier G1/4 Gewinde Öffnungen, anhand derer der Grafikkarten-Kühler auch im SLI-Betrieb verwendet werden kann. Anhand des mitgelieferten RBW LED-Strip kann der Kühler über ein Mainboard oder über den optional erhältlichen Controller beleuchtet werden. Hinweis! Die von Bykski verwendet LED Module sind immer mit 5Volt zu betreiben. Für den Betrieb wird entweder ein Adapterkabel (3pin 5V ADD-Header) oder ein kompatibler Controller benötigt. Achtung! 5Volt LED Module dürfen nicht an eine 12Volt Stromquelle angeschlossen werden, da diese zu einer sofortigen Zerstörung des LED Moduls führt! Lieferumfang: 1x Full Cover GPU Block 2x Blindstopfen 1x Befestigungsmaterial 1x Wärmeleitpads 1x Anleitung 1x RBW LED-Strip

Bykski FR-B-RBW-C8 RBW(5v 3pin) Lighting Sync Controller The Bykski FR-B-RBW-C8 RBW(5v 3pin) Lighting Sync Controller is recommended by Bykski as an optional accessory for its LED modules! The IFR remote control, offers a numerous setting for the LED‘s and fans. At the controller can be connect with up to 8 RBW-fans and 4 RBW modules. Power is supplied directly via a 4-pin connector and the RGB synchronization of the mainboard is supplied via the 3-pin synchronization cable. Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scopoe of delivery: 1 x IRF remote controller 1 x Controller 1 x 4-Pin connector 1 x Sync cable

The GPU block for your new set up! The Bykski RTX 2080/80TI Referenz Design / Founders Edition GPU Cooler is a powerful complete graphic card cooler especially developed for see list. Its large-scale channels and improved flow ensure efficient cooling of the GPU, voltage transformers and graphic card memorys.The nickel-plated heat sink made of solid copper is covered by an acrylic glass lid transparent, giving it an elegant and sophisticated appearanceto the cooler. The cooler's connector terminal has four G1 / 4 threaded holes, allowing the graphic card cooler to work in SLI mode.The radiator can be illuminated via a mainboard or through the optionally available controller using the supplied RBW LED strip. Note! Bykski LED modules are designed to operate at only 5V. For operation, either an adapter cable (3 pin 5V ADD header) or a compatible controller would be required. Attention! The 5 Volt LED modules must NOT be connected to a 12 Volt power source, as this leads to an immediate destruction of the LED module by the overload!! Scope of delivery: 1x Full Cover GPU Block 2x dummy plugs 1x mounting material 1x thermal pads 1x Instructions manual 1x RBW LED strip Suitable for: 2080TI: NVIDIA: - GeForce RTX 2080 Ti 11GB (Founders Edition) ASUS: - Dual GeForce RTX 2080 Ti OC Edition 11GB GDDR6 - Turbo GeForce RTX 2080 Ti 11GB GDDR6 MSI: - GeForce RTX 2080 Ti Duke 11G OC - GeForce RTX 2080 Ti VENTUS 11G OC EVGA: - GeForce RTX 2080 Ti 11GB - GeForce RTX 2080 Ti XC Gaming - GeForce RTX 2080 Ti XC Ultra Gaming GALAX: - GeForce RTX 2080 Ti - GeForce RTX 2080 Ti 11GB General - GeForce RTX 2080 Ti OC - GeForce RTX 2080 Ti OC White - GeForce RTX 2080 Ti 11GB SG Gigabyte: - GeForce RTX 2080 Ti WindForce OC 11G Zotac: - Gaming GeForce RTX 2080 Ti AMP 11GB GDDR6 - Gaming GeForce RTX 2080 Ti Triple Fan 11GB GDDR6 - GeForce RTX 2080 Ti 11GB X-Gaming OC Colorful: - iGame GeForce RTX 2080 Ti Advanced - iGame GeForce RTX 2080 Ti Advanced OC PNY: - GeForce RTX 2080 Ti XLR8 Gaming Overclocked Edition 2080: NVIDIA: - GeForce RTX 2080 8GB (Founders Edition) ASUS: - Dual GeForce RTX 2080 OC Edition 8GB GDDR6 - Turbo GeForce RTX 2080 OC Edition8GB GDDR6 MSI: - GeForce RTX 2080 Duke 8G OC - GeForce RTX 2080 VENTUS 8G OC EVGA: - GeForce RTX 2080 8GB - GeForce RTX 2080 XC Gaming - GeForce RTX 2080 XC Ultra Gaming GALAX: - GeForce RTX 2080 - GeForce RTX 2080 General - GeForce RTX 2080 OC - GeForce RTX 2080 OC White - GeForce RTX 2080 SG Gigabyte: - GeForce RTX 2080 WindForce OC 8G Zotac: - Gaming GeForce RTX 2080 AMP 8GB GDDR6 - Gaming GeForce RTX 2080 Triple Fan 8GB GDDR6 - GeForce RTX 2080 8GB X-Gaming OC - Gaming GeForce RTX 2080 Blower 8GB GDDR6 Colorful: - iGame GeForce RTX 2080 Advanced - iGame GeForce RTX 2080 Advanced OC PNY: - GeForce RTX 2080 XLR8 Gaming Overclocked Edition MAXSUN: - GeForce RTX2080 OC 8G (V2) Gainward: GeForce RTX 2070 GeForce RTX 2070 OC GALAX: GeForce RTX 2070 GeForce RTX 2070 OC iGame: GeForce RTX 2070 Ultra OC HA1 Gigabyte: GeForce RTX 2070 OC 8G MSI: GeForce RTX 2070 8G Duke