Otsing: fan controller (arhiveeritud tooted)

Effizienter und stylisher 120er Universal-Lüfter im Triplepack, mit 6-Pin-Anschluss (Adapter inkl.), adressierbare RGB-LED-Beleuchtung, 1.000 U/min, 17,5 dB(A), 1,68 mmH2O, hydraulisches Lager, inkl. Controller und Fernbedienung

You may have already seen the Alphacool Eiszyklon Aurora LUX Pro fan on the Alphacool Eisbaer Aurora series. It offers a wide control range as well as outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects. Ingenious Lighting The frame is equipped with digital addressable 5V RGB LEDs which illuminate both sides of the whole frame. The frame is not completely transparent, but the illumination is done through narrow slits in four places. On the upper side there are two rows of these slits. Each narrow frame runs along the inside and outside of the frame. This creates a unique illumination which looks very noble. Thanks to the recessed light diffusers the light is distributed evenly. This means that Individual LEDs are no longer visible. Wide Control Range and Silent The fan can be controlled from 700 to 2000 rpm via the 4-pin PWM connector. At 700 rpm the fan is almost silent, but still offers a good airflow rate as well as a high static pressure. Therefore, the fan can also be used very well on radiators for a wa-ter cooling system. Thanks to the high airflow, the fan is also ideal for ventilating a case. Decouplers are also found directly on the frame. The soft foam padding reduces the transmission of vibrations to the case. A further plus point for the silent capabili-ty of the fan. Connections? The fan is controlled via a 4-pin PWM connector. The cable is 50 cm long. This allows the fan to be connected to the mainboard or a special controller without any additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector. Tecnical data L x W x H: 120 x 120 x 25mm Speed: 700 - 2000 rpm Static pressure: 2,0 mm H2O Air flow rate: 104,49 m³/h Bearing: Hydraulic Fan connector: 4-Pin PWM aRGB connector: 3-Pin JST + 3-Pin 5V LEDs: Adressable Digital RGB LEDs Noise: 21,5 - 33,8 dB(A) MTBF: 40.000h LEDs: 16x aRGB LEDs Download Data sheet PDF: Alphacool Eiszyklon Aurora LUX PRO 2 Digital RGB fan

Equipped with ARGB LEDs with 16.8 million possible color combinations, dual addressable loops and an ARGB one-click controller; Sirius Pure offers a cleaner, brighter appearance to your PC! ASP120 3-PACK

EK Vardar was specially developed for the water cooling sector, which embodies the best quality and performance. With the Vardar Evo range, these have been further refined. Like their predecessors, they have a 4-pin PWM connector for automatic control on the mainboard or on a suitable fan controller. Of course the fans can also be operated at maximum speed on a 3-pin connector. As they are primarily intended to generate a very high static pressure on radiators, special attention was paid to this, as well as to low noise. Furthermore, this fan is the ER-version, which allows a larger PWM control range (25 - 100%). The corresponding special start-stop function is also practical. The fan also has D-RGB, which rounds off the inner workings of the case. The hydrodynamic slide bearing also guarantees a long service life of 50,000 hours. Technical Data: Dimensions: 120 x 120 x 25 mm Material: Plastic Color: White(Frame), Transparent (Blades) Speed: 2200 rpm (+/- 10%) PWM Duty Cycle: 25 - 100% (Extended Range) Noise Level: 33,5 dBA Max Air Flow: 131 m³/h Static Pressure: 3,16 mm H2O Bearing durability: 50.000 hrs @ 40°C (MTBF) Rated Voltage: 12V DC Connector: 4-Pin PWM header Sleeved cable length: 50 cm RGB cable length: 10 cm D-RGB connector classic 3-pin (+5V, Data, Empty, Ground) Scope of Delivery: 1x EK-Vardar EVO 120ER D-RGB 120mm fan, 4x Screws

EK Vardar was specially developed for the water cooling sector, which embodies the best quality and performance. With the Vardar Evo range, these have been further refined. Like their predecessors, they have a 4-pin PWM connector for automatic control on the mainboard or on a suitable fan controller. Of course the fans can also be operated at maximum speed on a 3-pin connector. As they are primarily intended to generate a very high static pressure on radiators, special attention was paid to this, as well as to low noise. Furthermore, this fan is the ER-version, which allows a larger PWM control range (25 - 100%). The corresponding special start-stop function is also practical. The fan also has D-RGB, which rounds off the inner workings of the case. The hydrodynamic slide bearing also guarantees a long service life of 50,000 hours. Technical Data: Dimensions: 120 x 120 x 25 mm Material: Plastic Color: Black (Frame), White (Blades) Speed: 2200 rpm (+/- 10%) PWM Duty Cycle: 25 - 100% (Extended Range) Noise Level: 33,5 dBA Max Air Flow: 131 m³/h Static Pressure: 3,16 mm H2O Bearing durability: 50.000 hrs @ 40°C (MTBF) Rated Voltage: 12V DC Connector: 4-Pin PWM header Sleeved cable length: 50 cm RGB cable length: 10 cm D-RGB connector classic 3-pin (+5V, Data, Empty, Ground) Scope of Delivery: 1x EK-Vardar EVO 120ER D-RGB 120mm fan, 4x Screws

EK Vardar was developed especially for the water cooling sector, embodying the best quality and performance. With the Vardar Evo series, these have been further refined. Like their predecessors, they have a 4-pin PWM connector for automatic control on the mainboard or on a suitable fan controller. Of course the fans can also be operated at maximum speed on a 3-pin connector. Since they are primarily intended to generate a very high static pressure on radiators, special attention was paid to this, as well as to a low noise level. Furthermore, this fan is the ER version, which allows a larger PWM control range (25 - 100%). The corresponding special start-stop function is also practical. The hydrodynamic plain bearing also guarantees a long service life of 50,000 hours. Technical Data: Dimensions: 140 x 140 x 25 mm Material: Plastic Color: Black (Frame), Black (Blades) Speed: 2000 rpm (+/- 10%) PWM Duty Cycle: 25 - 100% (Extended Range) Noise Level: 40,7 dBA Max Air Flow: 184 m³/h Static Pressure: 3,15 mm H2O Bearing durability: 50.000 hrs @ 40°C (MTBF) Rated Voltage: 12V DC Connector: 4-Pin PWM header Sleeved cable length: 40 cm Scope of Delivery: 1x EK-Vardar EVO BB Fan, 4x Screws

EK Vardar was developed especially for the water cooling sector, embodying the best quality and performance. With the Furious Vardar Evo series, these have been further refined. Like their predecessors, they have a 4-pin PWM connector for automatic control on the mainboard or on a suitable fan controller. Of course the fans can also be operated at maximum speed on a 3-pin connector. Since they are primarily intended to generate a very high static pressure on radiators, special attention was paid to this, as well as to a low noise level. The hydrodynamic plain bearing also ensures a long service life of 50,000 hours. Technical Data: Dimensions: 140 x 140 x 25 mm Material: Plastic Color: Black (Frame), Black (Blades) Speed: 2500 rpm (+/- 10%) PWM Duty Cycle: 40 - 100% Noise Level: 48,4 dBA Max Air Flow: 244 m³/h Static Pressure: 5,28 mm H2O Bearing durability: 50.000 hrs @ 40°C (MTBF) Rated Voltage: 12V DC Connector: 4-Pin PWM header Sleeved cable length: 300 mm Scope of Delivery: 1x EK-Vardar-Fan, 4x Screws

120-mm-PWM-Lüfter von Lian Li, einzigartiges Stecksystem für weniger Kabelsalat, mit adressierbaren RGB-LEDs, max. 1900 U/min, max. 99,45 m³/h Fördervolumen, max. 2,54 mm H2O statischer Druck, im 3er-Pack mit UNI HUB-Controller

120-mm-PWM-Lüfter von Lian Li, einzigartiges Stecksystem für weniger Kabelsalat, mit adressierbaren RGB-LEDs, max. 1900 U/min, max. 99,45 m³/h Fördervolumen, max. 2,54 mm H2O statischer Druck, im 3er-Pack mit UNI HUB-Controller

140-mm-RGB-Lüfter in Schwarz, einzigartiges Stecksystem für weniger Kabelsalat, mit adressierbaren RGB-LEDs, max. 1.500 U/min, max. 119,7 m³/h Fördervolumen, max. 1,67 mmH2O statischer Druck, im Doppelpack mit UNI HUB-Controller

Product kirjeldus: SilentiumPC Corona HP EVO ARGB KIT case fan Product Type: Case fan Packaged Quantity: 3 (spetsifikatsioons are for single item) Package Content: Mounting screws, 1-to-3 ARGB splitter, ARGB adapter, Nano-Reset ARGB controller, ARGB kaablid värv: must, milky valge Fan Diameter: 140 mm Fan kõrgus: 25 mm Fan Bearing: Hydraulic bearing pöördekiirus: 1200 pööret minutis õhuvool: 45 cfm Power ühenduspesa: 3-pin fan connector, 3-pin ARGB connector nominaalpinge: 12 V Features: RGB LED x18, 9 fan blade design, anti-vibration kummist pads, addressable RGB ASUS Aura Sync technology, GIGABYTE RGB Fusion toetatud, MSI Mystic Light Sync toetatud, ASRock Polychrome toetatud Manufacturer Warranty: 2-year garantii

Product kirjeldus: SilentiumPC Corona HP EVO ARGB KIT case fan Product Type: Case fan Packaged Quantity: 3 (spetsifikatsioons are for single item) Package Content: Mounting screws, 1-to-3 ARGB splitter, ARGB adapter, Nano-Reset ARGB controller, ARGB kaablid värv: must, milky valge Fan Diameter: 120 mm Fan kõrgus: 25 mm Fan Bearing: Hydraulic bearing pöördekiirus: 1500 pööret minutis õhuvool: 35 cfm Power ühenduspesa: 3-pin fan connector, 3-pin ARGB connector nominaalpinge: 12 V Features: RGB LED x18, 9 fan blade design, anti-vibration kummist pads, addressable RGB MSI Mystic Light Sync toetatud, ASUS Aura toetatud, ASRock Polychrome toetatud, GIGABYTE RGB Fusion 2.0 toetatud Manufacturer Warranty: 2-year garantii

Thermaltake's Riing Quad 14 RGB is a PWM controlled fan with a quadruple 16.8 million colour LED ring. Due to the self-lubricating hydraulic bearing, the fan benefits from very quiet operation and low heat generation. As the sealing cap prevents lubricant leakage, a long service life is also guaranteed. The design of the fan is based on performance, which is why it features high static pressure and efficient cooling. The anti-vibration pads also ensure low noise levels. The four independent LED rings, with over 54 addressable LEDs in total, provide impressive light coverage and high colour intensity. The extensive and breathtaking effects add the finishing touches to your housing and give it a unique look. As other controllers (also from Thermaltake) are not compatible with the fans, the 3-piece set includes a separate controller. It is recommended to connect only 5 Riing Trio fans per controller (connected with a Molex cable). If you own a lot of Thermaltake RGB PLUS products, you can really let off steam with the TT RGB PLUS software. Whether you want to synchronise the lighting in games, movies and music or specific lighting modes, colours and speeds, the software will make your system really shine. In addition, the software can also regulate fan speeds, for example, and also offers the option of voice control. With Thermaltake's NeonMaker software, the possibilities are even extended to create incredible and dynamic light shows. Furthermore, all Thermaltake TT RGB PLUS products are compatible with Razer chroma lighting and Amazon Alexa. Technical Data: Dimenson: 140 x 140 x 25 mm Interface: USB 2.0 connectors (9 Pin) Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V and 5 V Rated current: 12V - 0.12 A , 5V - 0.9 A Power Input: 12V - 4.32 W, 5V - 13.5 W Fan Speed: 500 - 1400 rpm Max. Air Pressure: 1.71 mm-H2O Max Air Flow: 60.17 CFM Noise: 26.1 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 238 g

Requires Expansion pesa Standard: PCI Express 3.0 x16 Video kiibistik: AMD Radeon RX 550 GPU Core Speed Boost1MHz GPU Quantity: 1Stream Protsessors Quantity: 512 Compute Units Quantity: 8 Texture Mapping Unit Quantity12.0 OpenGL 4.5 Video mälu tüüp: Video Controller Memory mälu tüüp1500 MHz Memory Bus ribalaius: 64 bit DVI liides Quantity1DVI liides ühenduse tüüp: 24 Pin DVI-D HDMI liides Quantity1HDMI liides ühenduse tüüp: HDMI (Type A) Jahutussüsteem Type1kg Pack kaal Netto (kg): 3.5 kg Pieces in pack1kg Retail Packaging Netokaal Carton: 3 kg Retail Packaging Netokaal plastik1Package Type: OEM EAN Code1

The MasterLiquid ML120L RGB V2 from Coolermaster is a further development of the MasterLiquid Lite series. The dual-chamber pump of the ML120L RGB V2 has been redesigned to provide even more power and cooling efficiency with quieter operation. The radiator has also been upgraded, with the cooling surface increased by 25%, resulting in better heat dissipation. The fans have been equipped with the latest SickleFlow design, which makes them even quieter than before and cools the radiator effectively. The lighting can be controlled with the included RGB LED controller or via compatible mainboards. Technical Data Exterior Color: White CPU Socket: Intel : 2066, 2011-v3, 2011, 1151, 1150, 1155, 1156, AMD : AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1 Radiator Material: Aluminum Radiator Dimensions: 277 x 119,6 x 27,2 mm / 10,9 x 4,7 x 1,1 inch Pump Dimensions: 79,9 x 76 x 47,1 mm / 3,1 x 3 x 1,9 inch Pump MTTF: 70,000 Hours Pump Noise Level: < 15 dBA Pump Connector: 3-Pin Pump Rated Voltage: 12 VDC Pump Power Consumption: 2.36W (LED 2.21W) Fan Dimensions (L x W x H): 120 x 120 x 25 mm / 4,7 x 4,7 x 1 inch Fan Quantity: 2 PCS Fan LED Type: RGB Fan Speed: 650-1800 RPM ± 5% Fan Airflow: 62 CFM (Max) Fan Noise Level: 8 - 27 dBA Fan Pressure: 2.5 mmH₂O (Max) Fan Life Expectancy: 160,000 Hours Fan Power Connector: 4-Pin (PWM) Fan Rated Voltage: 12VDC Fan Rated Current: 0.15A (LED 0.2A) RAM Clearance: N/A Warranty: 2 years Series: MasterLiquid Lite Cooler Type: Liquid Cooler Radiator Size: 240

Product kirjeldus: SilentiumPC Fortis protsessor cooler Product Type: protsessor cooler Package Content: Thermal paste, fan clips, Nano-Reset ARGB controller Compatibility: LGA775 Socket, LGA1156 Socket, Socket AM2, Socket AM2+, LGA1366 Socket, Socket AM3, LGA1155 Socket, Socket AM3+, LGA2011 Socket, Socket FM1, Socket FM2, LGA1150 Socket, Socket FM2+, LGA2011-3 Socket, LGA1151 Socket, LGA2066 Socket Fan Diameter: 140 mm Fan Bearing: Hydraulic bearing pöördekiirus: 500-1400 pööret minutis Power ühenduspesa: 4-pin fan connector, 3-pin ARGB connector Features: Nickel coated heatsink, Pulse-width modulation (PWM) tugi mõõtmed (WxDxH): 12.5 cm x 14 cm x 15.8 cm kaal: 800 g Features: Asymmetrical design, GIGABYTE RGB Fusion toetatud, MSI Mystic Light Sync toetatud, ASUS Aura toetatud, ASRock Polychrome toetatud Manufacturer Warranty: 2-year garantii

The new Alphacool Eisblock XPX Aurora Edge CPU water cooler offers fantastic performance thanks to the patented ramp design as well as boasting excellent quality. The new Aurora design in combination with the addressable digital RGB illumination offers many possibilities for outstanding illumination of the CPU water block. Performance in abundance! Alphacool already developed and patented new flow technology for the first Alphacool Eisblock XPX series. The so-called "ramp system" ensures an even flow of water inside the cooler and sits in front of the diffuser plate. This ensures that the water is pressed evenly through the diffuser plate, which in turn pushes the water evenly over the cooling base. The cooling channels on the CPU cooler base has also been enlarged to a proud 34 x 32 mm to accommodate the ever-growing CPU DIEs. This is especially true for multi-core processors with 4, 6, 8 or even 12 and more CPU cores. So that the heat from the CPU can be transferred to the water as quickly as possible. 81 cooling fins can be found on the cooling plate to ensure maximum heat diffusion. The fin structure has been reduced to just 0.2 mm in order to create the largest possible surface area in the smallest possible space. And the lighting? All new Eisblock XPX Aurora Edge CPU waterblocks come with addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. With up to 15 digital RGB LEDs the entire CPU block is evenly and intensively lit. Of course, the brightness can be controlled by an appropriate controller. And as with all aRGB LED products all known effects can be created. From simple colour changes to wave effects and rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled via mainboards using the standard 3-pin 5V connector. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Extension cables may be needed if you want to connect the products in series, depending on the size of the case. Is installation difficult? Mounting the XPX Aurora Edge Eisblock cooler is simple. The backplate is simply attached to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped to the cooler and the corresponding mounting screws are pre-attached to this frame. Next, you simply apply thermal paste and you attach the cooler using the screws. Please note: Remove the protective foil on the cooler base before use! Unique Aurora Design The Alphacool Eisblock Aurora Edge has been significantly changed in some points to its predecessor, the Eisblock XPX. The lower part of the cooler is completely made of brass and no longer of plexiglass or transparent nylon. This changes the overall feel and quality of the cooler. Not only is it heavier in the hand, but it is also much more stable than the usual Plexi CPU water coolers. In order to stand out visually from the normal Eisblock XPX Aurora CPU water cooler, the bottom of the cooler was kept completely in black. This emphasizes the visual effect of the water flow. The corners of the CPU cooler are more angular, which makes the cooler stand out from the normal Aurora Plexi Eisblock. Technical details Dimensions (WxTxH): 70 x 70 x 32,5 mm Net weight: 407 g Max working temperature: 60 °C Material cooler: nickel plated copper Material bottom part: brass Material top: Plexi Threads: 2 x G1/4“ Power supply Digital RGB: 3-Pin 5V Pressure tested: 1,5 Bar Certificates: CE, FC, ROHS Compatibility Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 Download manual PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Black Digital RGB Download data sheet PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Black Digital RGB

The new Alphacool Eisblock XPX Aurora CPU water cooler offers fantastic performance thanks to the patented ramp design as well as boasting excellent quality. The new Aurora design in combination with the addressable digital RGB illumination offers many possibilities for outstanding illumination of the CPU water block. Performance in abundance! Alphacool already developed and patented new flow technology for the first Alphacool Eisblock XPX series. The so-called "ramp system" ensures an even flow of water inside the cooler and sits in front of the diffuser plate. This ensures that the water is pressed evenly through the diffuser plate, which in turn pushes the water evenly over the cooling base. The cooling channels on the CPU cooler base has also been enlarged to a proud 34 x 32 mm to accommodate the ever-growing CPU DIEs. This is especially true for multi-core processors with 4, 6, 8 or even 12 and more CPU cores. So that the heat from the CPU can be transferred to the water as quickly as possible. 81 cooling fins can be found on the cooling plate to ensure maximum heat diffusion. The fin structure has been reduced to just 0.2 mm in order to create the largest possible surface area in the smallest possible space. And the lighting? All new Eisblock XPX Aurora Plexi CPU waterblocks come with addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. With up to 15 digital RGB LEDs the entire CPU block is evenly and intensively lit. Of course, the brightness can be controlled by an appropriate controller. And as with all aRGB LED products all known effects can be created. From simple colour changes to wave effects and rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled via mainboards using the standard 3-pin 5V connector. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Extension cables may be needed if you want to connect the products in series, depending on the size of the case. Is installation difficult? Mounting the Eisblock XPX Aurora Plexi cooler is simple. The backplate is simply attached to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped to the cooler and the corresponding mounting screws are pre-attached to this frame. Next, you simply apply thermal paste and you attach the cooler using the screws. Please note: Remove the protective foil on the cooler base before use! Unique Aurora Design The Alphacool Eisblock Aurora Plexi differs only slightly from its predecessor Alphacool Eisblock XPX. The lower part of the Eisblock Aurora Plexi is not made of acrylic, but of transparent nylon. This means it is almost impossible that the holder or the high temperature fluctuations during operation will cause the plexi to crack or fracture. The upper part of the cooler houses the integrated digital addressable RGB LEDs. A separate RGB frame like the predecessor Eisblock XPX is no longer necessary. Like all new Aurora products, the Alphacool Eisblock Aurora Plexi also has a black frame, embedded with the Alphacool logo on the top. The Alphacool logo remains very discreet and unobtrusive. Technical details Dimensions (WxTxH): 75,8 x 75,8 x 33 mm Net weight: 206 g Max working temperature: 60 °C Material cooler: nickel plated copper Material bottom part: nylon Material top: Plexi Threads: 2 x G1/4“ Power supply Digital RGB: 3-Pin 5V Pressure tested: 1,5 Bar Certificates: CE, FC, ROHS Compatibility Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 Download manual PDF: Alphacool Eisblock XPX Aurora - Plexi Black Digital RGB Download data sheet PDF: Alphacool Eisblock XPX Aurora - Plexi Black Digital RGB

The new Alphacool Eisblock XPX Aurora CPU water cooler offers fantastic performance thanks to the patented ramp design as well as boasting excellent quality. The new Aurora design in combination with the addressable digital RGB illumination offers many possibilities for outstanding illumination of the CPU water block. Performance in abundance! Alphacool already developed and patented new flow technology for the first Alphacool Eisblock XPX series. The so-called "ramp system" ensures an even flow of water inside the cooler and sits in front of the diffuser plate. This ensures that the water is pressed evenly through the diffuser plate, which in turn pushes the water evenly over the cooling base. The cooling channels on the CPU cooler base has also been enlarged to a proud 34 x 32 mm to accommodate the ever-growing CPU DIEs. This is especially true for multi-core processors with 4, 6, 8 or even 12 and more CPU cores. So that the heat from the CPU can be transferred to the water as quickly as possible. 81 cooling fins can be found on the cooling plate to ensure maximum heat diffusion. The fin structure has been reduced to just 0.2 mm in order to create the largest possible surface area in the smallest possible space. And the lighting? All new Eisblock XPX Aurora Plexi CPU waterblocks come with addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. With up to 15 digital RGB LEDs the entire CPU block is evenly and intensively lit. Of course, the brightness can be controlled by an appropriate controller. And as with all aRGB LED products all known effects can be created. From simple colour changes to wave effects and rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled via mainboards using the standard 3-pin 5V connector. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Extension cables may be needed if you want to connect the products in series, depending on the size of the case. Is installation difficult? Mounting the Eisblock XPX Aurora Plexi cooler is simple. The backplate is simply attached to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped to the cooler and the corresponding mounting screws are pre-attached to this frame. Next, you simply apply thermal paste and you attach the cooler using the screws. Please note: Remove the protective foil on the cooler base before use! Unique Aurora Design The Alphacool Eisblock Aurora Plexi differs only slightly from its predecessor Alphacool Eisblock XPX. The lower part of the Eisblock Aurora Plexi is not made of acrylic, but of transparent nylon. This means it is almost impossible that the holder or the high temperature fluctuations during operation will cause the plexi to crack or fracture. The upper part of the cooler houses the integrated digital addressable RGB LEDs. A separate RGB frame like the predecessor Eisblock XPX is no longer necessary. Like all new Aurora products, the Alphacool Eisblock Aurora Plexi also has a black frame, embedded with the Alphacool logo on the top. The Alphacool logo remains very discreet and unobtrusive. Technical details Dimensions (WxTxH): 75,8 x 75,8 x 33 mm Net weight: 206 g Max working temperature: 60 °C Material cooler: nickel plated copper Material bottom part: nylon Material top: Plexi Threads: 2 x G1/4“ Power supply Digital RGB: 3-Pin 5V Pressure tested: 1,5 Bar Certificates: CE, FC, ROHS Compatibility Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 Download manual PDF: Alphacool Eisblock XPX Aurora - Plexi Chrome Digital RGB Download data sheet PDF: Alphacool Eisblock XPX Aurora - Plexi Chrome Digital RGB

The new Alphacool Eisblock XPX Aurora Edge CPU water cooler offers fantastic performance thanks to the patented ramp design as well as boasting excellent quality. The new Aurora design in combination with the addressable digital RGB illumination offers many possibilities for outstanding illumination of the CPU water block. Performance in abundance! Alphacool already developed and patented new flow technology for the first Alphacool Eisblock XPX series. The so-called "ramp system" ensures an even flow of water inside the cooler and sits in front of the diffuser plate. This ensures that the water is pressed evenly through the diffuser plate, which in turn pushes the water evenly over the cooling base. The cooling channels on the CPU cooler base has also been enlarged to a proud 34 x 32 mm to accommodate the ever-growing CPU DIEs. This is especially true for multi-core processors with 4, 6, 8 or even 12 and more CPU cores. So that the heat from the CPU can be transferred to the water as quickly as possible. 81 cooling fins can be found on the cooling plate to ensure maximum heat diffusion. The fin structure has been reduced to just 0.2 mm in order to create the largest possible surface area in the smallest possible space. And the lighting? All new Eisblock XPX Aurora Edge CPU waterblocks come with addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. With up to 15 digital RGB LEDs the entire CPU block is evenly and intensively lit. Of course, the brightness can be controlled by an appropriate controller. And as with all aRGB LED products all known effects can be created. From simple colour changes to wave effects and rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled via mainboards using the standard 3-pin 5V connector. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Extension cables may be needed if you want to connect the products in series, depending on the size of the case. Is installation difficult? Mounting the XPX Aurora Edge Eisblock cooler is simple. The backplate is simply attached to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped to the cooler and the corresponding mounting screws are pre-attached to this frame. Next, you simply apply thermal paste and you attach the cooler using the screws. Please note: Remove the protective foil on the cooler base before use! Unique Aurora Design The Alphacool Eisblock Aurora Edge has been significantly changed in some points to its predecessor, the Eisblock XPX. The lower part of the cooler is completely made of brass and no longer of plexiglass or transparent nylon. This changes the overall feel and quality of the cooler. Not only is it heavier in the hand, but it is also much more stable than the usual Plexi CPU water coolers. In order to stand out visually from the normal Eisblock XPX Aurora CPU water cooler, the bottom of the cooler was kept completely in black. This emphasizes the visual effect of the water flow. The corners of the CPU cooler are more angular, which makes the cooler stand out from the normal Aurora Plexi Eisblock. Technical details Dimensions (WxTxH): 70 x 70 x 32,5 mm Net weight: 407 g Max working temperature: 60 °C Material cooler: nickel plated copper Material bottom part: brass Material top: Plexi Threads: 2 x G1/4“ Power supply Digital RGB: 3-Pin 5V Pressure tested: 1,5 Bar Certificates: CE, FC, ROHS Compatibility Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 Download manual PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Chrome Digital RGB Download data sheet PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Chrome Digital RGB

Build your dream team and face off against friends with this digital content bundle. Featuring a voucher+ for 3 MyTEAM packs and 2,500 MyTEAM points at no extra cost, you can build your ultimate fantasy roster of today’s stars and yesterday’s legends in NBA 2K22. Use voucher to download 3 MyTeam packs & 2,500 MyTeam points from PlayStation™Store. NBA 2K22 not included in bundle. NBA 2K22 required on PS4™/PS5™ consoles to access. Account for PlayStation™Network required. Voucher expires 12/30/2023.

Individual, yet suitable for everyone. Minimalistic, yet full of elegance. High Performance and made for your next project: The Alphacool Eisblock GPX! Style Meets Performance Alphacool has already created a name for itself with its Eisblock GPX series among modders, gamers and performance enthusiasts. Alphacool offers several models to fit many NVIDIA® graphics card layouts, so there's something for everyone. For the first time the Eisblock GPX Plexi Light and Plexi is equipped with ARGB (Addressable RGB) lighting. Also, for all fans of simplicity Alphacool also offers the classic acetal version, which lets your GPU stay sleek and beautiful with a minimalistic noble design. Only the Best for You The Alphacool Eisblock series is based on completely nickel-plated copper bottoms, which are made from a single block of copper. The flow is optimised by the generous water channels in the best possible way so that they have been finely tuned to dissipate the heat. Thanks to the full cover design, all coolers have the performance to cool your GPU during all gaming and heavy-duty activities in the best possible way. This gives your hardware a longer life and protects it optimally. The included backplates puts the finishing touches to the Eisblock and perfectly crowns it. Individually Tuned to Your System Thanks to new ARGB technology, you can customise the Eisblock Plexi and Plexi Light more than ever before. These 5V addressable RGB LED´s can be connected to the Alphacool EIscontrol Controller ( 1015857 , sold separately). Whether you like it colourful like a mystical unicorn or if you just want a single colour. The Eisblock with ARGB lighting makes it possible. With the Eisblock Plexi variant you can see the fluid running through your water block and with the Alphacool Eiswater your gaming system is the eyecatcher at every LAN party. No GPU fan, No GPU Sound In addition to the increased performance, you have another advantage of water cooling in all situations: no annoying fans on your GPU and no excessive temperatures that make your graphics card howl. The Alphacool Eisblock Series completely replaces your GPU air cooler and helps you towards that silent system you've longed for. Compatible to MSI GeForce RTX 2080 Gaming X Trio, 8GB GDDR6, HDMI, 3x DP, USB-C (V372-031R) MSI GeForce RTX 2080 SUPER Gaming X Trio, 8GB GDDR6 (V372-248R) MSI GeForce RTX 2070 SUPER Gaming X Trio, 8GB GDDR6 (V372-257R) ATTENTION: The cooler is only compatible with connections with a maximum thread length of 5 mm. Technical Details Material Bottom: Nickel-plated Copper Material Cover: Acrylic (Plexi) Thread: 1/4" Connector: 3Pin ARGB (5V) (0,5A) Scope of Delivery Alphacool Eisblock GPX-N Plexi Light RTX 2080 M05 Backplate SLI Terminal Thermal Compound and Pads ARGB Cable Mounting Material Datasheet Manual

Stylish, ingenious 3.5-inch fan controller with modern front USB 3.0 ports.

4-channel fan controller for temperature-dependent switching on and off of fans, including temperature sensor

Umfangreiches Steuermodul von Lamptron, zur Steuerung von RGB-Beleuchtung & Lüftergeschwindigkeit, vier Kanäle mit jeweils bis zu 30 Watt, umfangreiche Kompatibilität

Fan controller for five fans with 3- or 4-pin connection

Can the Eisbaer from Alphacool become even better? Absolutely! Would the Eisbaer look even more impressive with aRGB? Definitely yes!! The Eisbaer Aurora AIO still cools the CPU with the well-known and high-quality copper cooler of the Eisbaer, although the surface area has been enlarged, compared to its predecessor. Also, the pump works much more efficiently with 10% more power, with reduced noise level. The hoses and fittings have also been completely revised and are now much smoother and more inconspicuous. Since durable TPV hose and fittings from the Enterprise Solution series are now used, safety and durability is also one of the features. For more individuality, fittings and hose can be easily replaced thanks to the G1/4 fittings. The Eisbaer Aurora, as before, can be expanded via the quick release fasteners. Also refilling is still possible. The most striking feature of the Eisbaer Aurora is the addressable RGB LED lighting. Here the focus is on the Eisbaer pump and the stylish Aurora LUX Pro fans. By using a compatible mainboard or controller, colour and effects can be adjusted individually. Technical Data: Radiator Dimension: 278 x 124 x 30 mm (L x W x H) Material: Full Copper Threads: 2x G1/4" Tubes Dimensions: 12,7 / 7,6 mm Material: Thermoplastic vulcanisates, EPDM/PP Colour: Matt black Operating temperature: -50 to +155°C Hardness: 35 Shore-A to 50 Shore-D Length: 40 cm Pump Housing Dimension: 66 x 66 x 69 mm (L x W x H) Material Reservoir: Transparent Nylon Threads: 2x G1/4" Connection Digital RGB: 3-Pin JST + 3-Pin 5V Quantity Digital aRGB LED: 10 Pump Speed: 2600 rpm Voltage: 7 - 13,5V DC Power Consumption: 4W Max. Flow Rate: 75 L/h Max. Head: 0,95 m Fans Size: 120 x 120 x 25 mm Speed: 800 - 2000 rpm Static Pressure: 2,0 mm H2O Air Flow Rate: 104,49 m³/h Bearings: Hydraulic Fan Connector: 4-Pin PWM Connection Digital RGB: 3-Pin JST + 3-Pin 5V Compatiblity Intel 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / TR4 / sTRX4

The Alphacool Eis-Matrix 2 Digital RGB Controller offers extensive control options for addressable digital RGB fans. With it, the speed of the fans can be infinitely adjusted and it offers all possibilities to realize the perfect lighting in your own system. Extensive connection options The Eis-Matrix II controller has seven 5-pin connectors for digital RGB fans. These connectors can be used for PWM fans with addressable digital RGB LEDs. Two 3-pin connectors are available for Digital RGB LED strips. With the appropriate Y-adapters more fans and LED strips can be connected and controlled per connector. However, please note that the controller can deliver a maximum of 36 W to fans and 30 W to LED strips. The power connection is done via a normal SATA connector. Control via the mainboard possible? A 4-pin connector with included cable offers the possibility to connect the controller directly to the mainboard. With the included adapter cable the fans can be controlled via a free PWM port. The digital aRGB LEDs are controlled via a 3-pin 5V connector (VD_G) or alternatively via a VDG connector. Which connector must be used depends on the connection possibilities of the mainboard. Remote control? If you do not want to control the controller via the mainboard, you can use the included infrared remote control. With this the fans can be regulated steplessly and of course extensive digital RGB effects can be created. These include effects such as pulsing, color gradients, changing colors and much more. In addition, the brightness and speed of the effects can be freely configured. The Eis-Matrix II Controller offers many possibilities of Digital RGB and fan control. Thanks to the connection possibilities of various mainboards, corresponding mainboard software solutions can also be used as controls. Tecnical data L x W x H: 8,4 x 5,4 x 2,4 cm Fan connnector: 7 x 5-Pin Connector aRGB stripes: 2 x 3-Pin Voltage aRGB LEDs: 5 V Max. current output aRGB LEDs: 6A / 30W Voltage fan connectors: 12 V Max. current output fans: 3A / 36W Scope of delivery 1 x Eis-Matrix Digital RGB LED fan Controller 1 x Infrared remote control (with battery) 1 x Mainboard adaptor cables 1 x 5-Pin to 4-Pin PWM + 3-Pin JST Adaptor 1 x SATA power connector Download data sheet PDF: Alphacool Eis-Matrix II Aurora Digital RGB Controller

The Eisbaer LT Aurora CPU AIO water cooler offers extremely good cooling performance due to the high-end components, which includes a full copper radiator. The components used are all from Alphacool’s classic custom water cooling sector and can also be found in its enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. At its heart, the DC-LT 2 pump The exceedingly small and compact DC-LT 2 pump has been further optimized compared to its predecessor. The impeller sits suspended on a ceramic axle and is supported by two magnets. A 3-phase sinusoidal drive ensures a much smoother running of the pump, which significantly contributes to minimizing noise. The pump offers enough power to add another component, such as a GPU water cooler or another radiator, to the loop. Ideally, it is coupled with an Eiswolf 2 GPU AIO water cooler. This also uses a DC-LT 2 pump. DIY fittings and ES tubing The tubing and fittings come from the standard custom cooling segment and all use a standard G1/4" thread. Therefore, it is extremely easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and, robust nylon. The quick connector is compatible with many other models from the Alphacool product line. Cooler As with all Alphacool products, the cooler base is made of nickel-plated copper and is equipped with exceptionally fine cooling fins that are distributed over almost the entire base. A flow plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. Full Digital RGB Mounting The pump unit and fans are fully equipped with Digital RGB LEDs, also known as Addressable RGB or aRGB. Extensive effects can be set with the included controller or with the Digital RGB controller on the motherboard. For a nice visual effect, there is an illuminated polar bear (Eisbaer). For easier control via a controller, the fans and also the pumps can be connected in series via daisy-chain. This ensures a clean wiring of the individual LED components. Technical data radiator L x W x H 274 x 120 x 25 mm (+/- 3%) Material cooling fins, chambers & cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 120 mm Possible fan assembly 2 x one-sided / 4 x both-sided Technical data cooler & pump L x W x H 69 x 69 x 45 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Technical data fan Speed 800 - 2000 RPM Static pressure 2,0 mm H 2 O Air flow rate 104,49 m³/h Bearings Hydraulic Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Compatibility list: - Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 - AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / TR4 / sTRX4 / sWRX / SP3 Downloads: Datasheet PDF | Manual PDF

The Eisbaer LT Aurora CPU AIO water cooler offers extremely good cooling performance due to the high-end components, which includes a full copper radiator. The components used are all from Alphacool’s classic custom water cooling sector and can also be found in its enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. At its heart, the DC-LT 2 pump The exceedingly small and compact DC-LT 2 pump has been further optimized compared to its predecessor. The impeller sits suspended on a ceramic axle and is supported by two magnets. A 3-phase sinusoidal drive ensures a much smoother running of the pump, which significantly contributes to minimizing noise. The pump offers enough power to add another component, such as a GPU water cooler or another radiator, to the loop. Ideally, it is coupled with an Eiswolf 2 GPU AIO water cooler. This also uses a DC-LT 2 pump. DIY fittings and ES tubing The tubing and fittings come from the standard custom cooling segment and all use a standard G1/4" thread. Therefore, it is extremely easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and, robust nylon. The quick connector is compatible with many other models from the Alphacool product line. Cooler As with all Alphacool products, the cooler base is made of nickel-plated copper and is equipped with exceptionally fine cooling fins that are distributed over almost the entire base. A flow plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. Full Digital RGB Mounting The pump unit and fans are fully equipped with Digital RGB LEDs, also known as Addressable RGB or aRGB. Extensive effects can be set with the included controller or with the Digital RGB controller on the motherboard. For a nice visual effect, there is an illuminated polar bear (Eisbaer). For easier control via a controller, the fans and also the pumps can be connected in series via daisy-chain. This ensures a clean wiring of the individual LED components. Technical data radiator L x W x H 390 x 120 x 25 mm (+/- 3%) Material cooling fins, chambers & cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler & pump L x W x H 69 x 69 x 45 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Technical data fan Speed 800 - 2000 RPM Static pressure 2,0 mm H 2 O Air flow rate 104,49 m³/h Bearings Hydraulic Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Compatibility list: - Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 - AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / TR4 / sTRX4 / sWRX / SP3 Downloads: Datasheet PDF | Manual PDF

The Alphacool Eisball reservoir with integrated pump top presents itself in a unique way. A spherical reservoir has never been seen before and it opens countless new possibilities, especially in the field of modding. From static single colour lighting to maybe an R2D2 mod: there are really no limits to your creativity. Another special feature of this version: The pump is already pre-installed. Alphacool uses the proven Eispump VPP755 V3. Unique design and excellent lighting In contrast to conventional reservoirs, the Alphacool Eisball has an unprecedented spherical design. The 22 digital RGB LEDs run completely around the equator of the Eisball in a chrome ring. These provide versatile lighting effects as well as your standard colours. Of course, the device comes with a Digital RGB Controller with which enables you to customize the style and lighting of your Eisball. Versatile mounting options Don't let yourself be limited to a single mounting option! The included adhesive mat and 2 different mounting plates gives you many mounting options: whether on the radiator, the fan slots, or a 2.5" SSD slot you’re covered. Alternatively, the proven universal Alphacool pump mounting can also be used. In combination with the VPP755, the Alphacool Eisball can even be operated upside down. But only and exclusively with the Alphacool VPP755 pump. Standard Laing D5 pumps cannot be operated upside down due to the spherical bearing. Where is the pump? The pump disappears completely inside the Eisball. It is inserted into the Eisball from below and fastened with a special pump holder. All Alphacool's own D5 style pumps such as the VPP655 and VPP755 as well as all original Laing D5 pumps are suitable for installation. Is the Eisball Silent Suitable? With the Eisball, the pump is completely inside the reservoir, and is therefore surrounded by the water. The water acts as additional noise insulation. The enclosed decouplers also reduce the transmission of vibrations to a minimum. All in all, a real Silent product! Disclaimer: In combination with the VPP755, the Alphacool Eisball can even be operated upside down. But only and exclusively with the Alphacool VPP755 pump. Standard Laing D5 pumps cannot be operated upside down due to the spherical bearing. Technical data: WxDxH: 117.51 x 128 x 128 mm WxDxH with mounting Material and decoupler: 130.01 x 128 x 128 mm Net weight: 510 g Maximum working temperature: 60 °C Material Eisball: transparent nylon Material pump holder: Acetal Material Digital RGB Ring: Acetal colour Eisball: transparent Colour Digital RGB Ring: Chrome Connections: IN 1x G1/4" / OUT 1 x G1/4" Fillport: 1 x G1/4" Capacity: 700 ml Digital RGB connector: 4-pin Voltage Digital RGB: 5 VDC Download manual PDF: Alphacool Eisball Digital RGB (ink. Eispumpe VPP755 V.3) Download data sheet PDF: Alphacool Eisball Digital RGB - Plexi (ink. Eispumpe VPP755 V.3)

The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket. With the optional XPX Pro AM4 mounting bracket, the Alphacool Eisbaer Pro CPU cooler can also be used on AMD Ryzen processors. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the additionally available AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Copper radiator As per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen. Real water cooling The Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system. Fan and lighting The entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 140mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 2.20 mm/H 2 O and offers a max. air flow of 154.1 m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible. How to connect everything The fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Technical data radiator L x W x H 460 x 144 x 30 mm (+/- 3% in the range of the pre-chambers) Material fins, chambers & channels copper Material threads brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 140 mm Fan mounting options 3 x one-sided / 3 x both-sided Technical data cooler and pump L x W x H 64 x 79 x 54,3 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Number of LEDs 10x Digital RGB LEDs Pump typ DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Technical data fans Speed 0 - 2000 RPM Static pressure 2,20 mm H 2 O Air flow rate 154,1 m³/h Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 140 x 140 x 25 mm

With the Eisblock Aurora XP³ light you get a very compact CPU water block for all current mainstream sockets from AMD and Intel. It offers the typical high Alphacool quality paired with excellent performance at a fantastic price. High cooling capacity! The cooling plate has been optimised to give the best performance for the price point. The nickel-plated copper radiator bottom has a surface area of 56 x 56 mm with a cross-slot structure and only 0.4 x 1 mm thick pins through which the water can flow. Due to the extremely large cooling surface, the water can effectively absorb the heat from the radiator bottom and remove it from the CPU area. The pin area is about 27.6 x 37.6 mm ensuring that most mainstream CPUs are covered completely which guarantees high cooling performance. The new multiple slotted nozzle plate was developed especially for this cooler to achieve a perfect interplay of water flow and inflow of the base plate. Only the combination of all these little things ensures the high performance. Let’s Have All the Colours! 9 digital RGB LEDs in a U-shaped configuration are inside the Alphacool Eisblock Aurora XP³. This ensures penetrating and extensive lighting. With the right addressable Digital RGB Controller each LED can be controlled individually. All known effects and colours can be displayed as desired. The connection is made via the usual 3-pin 5V connector. The outgoing cable has an integrated Y-adapter so you can easily and quickly connect several Aurora products together. This means that you don’t have to buy any special cables and means that you can create a cleaner look as you don’t have as many cables. Quick assembly! The mounting bracket is simply put over the CPU cooler. All mounting screws can be pre-assembled onto this Then you can simply screw it down. A well-illustrated manual with large render graphics is included so that the installation is easy to understand. The Eisblock Aurora XP³ Light offers not only a visual masterpiece with an extensive addressable digital RGB LED lighting, it also offers high performance thanks to the many small technical details. Technical details: Dimensions (L x W x H): 73 x 63 x 21 mm Net weight: 136 g Maximum working temperature: 60 °C Material cooler bottom: Nickel plated copper Material cooler: Plexi Connections: 2 x G1/4“ Power connector Digital RGB: 3-Pin 5V Pressure tested: 2 Bar Compatibility Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 Compatibility AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 Download manual: Alphacool Eisblock Aurora XP³ Download data sheet: Alphacool Eisblock Aurora XP³

The Alphacool Eiszyklon Aurora LUX fan impresses with its aRGB LEDs and light defusing areas that distribute the light evenly. It shows its strengths particularly on radiators due to a high static pressure, even if it rotates more slowly. Its maximum speed is 1100 rpm. Due to its naturally decoupled frame, it remains quiet with less vibrations. Unlike many other fans, it has only one cable, which ends with a 6-pin connector. With the Aurora LUX Digital RGB controller from Alphacool, this one cable can be used to regulate the speed as well as adjust the lighting effects and colours. Technical data: Fans Size: 120 x 120 x 25 mm Speed: 1100 rpm Static Pressure: 2.23 mm H2O Air flow rate: 87.32 m³/h Bearings: Hydraulic Fan/ aRGB Connector: 6-Pin Illumination: Digital addressable 5V RGB LEDs Controller Dimensions: 93 x 47 x 17 mm (L x W x H) Fan Connector: 10 x 6-Pin Digital RGB LED Strip Connector: 2x JTS 4-Pin Fan voltage: 12V Digital RGB LED Voltage: 5V Max. Power Output: 50W Control Via: Remote controller Mounting: Adhesive Tape

The Alphacool Eiszyklon Aurora LUX fan impresses with its aRGB LEDs and light defusing areas that distribute the light evenly. It shows its strengths particularly on radiators due to a high static pressure, even if it rotates more slowly. Its maximum speed is 1100 rpm. Due to its naturally decoupled frame, it remains quiet with less vibrations. Unlike many other fans, it has only one cable, which ends with a 6-pin connector. With the Aurora LUX Digital RGB controller from Alphacool, this one cable can be used to regulate the speed as well as adjust the lighting effects and colours. Important: You can connect this fan only on the Controller wich comes with the fan set Alphacool Eiszyklon Aurora Lux Digital RGB - 3pcs kit. Technical data: Size: 120 x 120 x 25 mm Speed: 1100 rpm Static Pressure: 2.23 mm H2O Air flow rate: 87.32 m³/h Bearings: Hydraulic Fan/ aRGB Connector: 6-Pin

The Alphacool Eiszyklon Aurora LUX fan offers extensive RGB lighting whilst operating efficiently and quietly. With a wide control range up to a maximum of 1500 rpm it can be operated from powerful to pleasantly quiet. The frame of the fan is naturally decoupled, which further underlines the silent capability. Addressable Digital RGB Lighting Standard RGB has come and gone, the future lies in addressable digital RGB LEDs that can be controlled individually. Therefore, the Eiszyklon Aurora LUX fan uses digital aRGB LEDs. To illuminate the frame of the fan optimally, a diffuser is used. The milky white fan frame scatters the light over the entire fan frame and provides a perfect and extensive illumination of the entire fan. Since each LED can be controlled individually, all known effects are possible. These include effects such as wave, pulse, breathing and much more. Flow Optimized Fan Blades The fan blades have been specially adapted for use on radiators. The most important point is a high static pressure. In order to achieve this even at low speeds, the fan blades are slightly bent. They act like a blade which pulls the air inwards and presses it downwards with overpressure. The 9 closely spaced fan blades also ensure a continuously high static pressure even at low speeds, perfect for use with a radiator. Of course, the Eiszyklon Aurora LUX fan is also suitable as a case fan. Connections? The fan is controlled via a 4-pin PWM connector. The cable is 44 cm long. This allows the fan to be connected to the mainboard or a special controller without any additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector. Technical Data: Size: 140 x 140 x 25 mm Speed: 1500 U/min Static pressure: 1,93 mm H2O Air flow rate: 118,93 m³/h Bearing: Hydraulisch Fan / RGB Connector: 4-Pin PWM, 3-Pin JST Lighting: Digital adressierbare 5V RGB LEDs Weight: 180 g Download Datenblatt PDF: Alphacool Eiszyklon Aurora LUX Digital RGB (140x140x25mm

You may have already seen the Alphacool Eiszyklon Aurora LUX Pro fan on the Alphacool Eisbaer Aurora series. It offers a wide control range as well as outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects. Ingenious Lighting The frame is equipped with digital addressable 5V RGB LEDs which illuminate both sides of the whole frame. The frame is not completely transparent, but the illumination is done through narrow slits in four places. On the upper side there are two rows of these slits. Each narrow frame runs along the inside and outside of the frame. This creates a unique illumination which looks very noble. Thanks to the recessed light diffusers the light is distributed evenly. This means that Individual LEDs are no longer visible. Wide Control Range and Silent The fan can be controlled from 700 to 2000 rpm via the 4-pin PWM connector. At 700 rpm the fan is almost silent, but still offers a good airflow rate as well as a high static pressure. Therefore, the fan can also be used very well on radiators for a wa-ter cooling system. Thanks to the high airflow, the fan is also ideal for ventilating a case. Decouplers are also found directly on the frame. The soft foam padding reduces the transmission of vibrations to the case. A further plus point for the silent capabili-ty of the fan. Connections? The fan is controlled via a 4-pin PWM connector. The cable is 50 cm long. This allows the fan to be connected to the mainboard or a special controller without any additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector. Tecnical data L x W x H: 120 x 120 x 25mm Speed: 700 - 2000 rpm Static pressure: 2,0 mm H2O Air flow rate: 104,49 m³/h Bearing: Hydraulic Fan connector: 4-Pin PWM aRGB connector: 3-Pin JST + 3-Pin 5V LEDs: Adressable Digital RGB LEDs Noise: 21,5 - 33,8 dB(A) MTBF: 40.000h LEDs: 16x aRGB LEDs Download Data sheet PDF: Alphacool Eiszyklon Aurora LUX PRO 2 Digital RGB f an

The Alphacool Eiszyklon fan is the ideal combination of silence and performance for a fan of its size. The airflow and high static pressure that is created in such a small space makes it the ideal fan for 92 mm radiators. The extensive Digital RGB lighting also provides the right mood in the system. Wide Control Range and Silence With a fan speed of 600 - 1800 rpm, Alphacool Eiszyklon offers a very high control range and means it is also well suited for silent systems. The 11 fan blades with a steep angle of attack provide a high static pressure and are ideally suited for operation on radiators. Decouplers can also be found directly on the frame. The soft foam pads reduce the transmission of vibrations to the case. Addressable Digital RGB Lighting The Alphacool Eiszyklon houses 12 Digital RGB LEDs. The entire fan frame serves as a diffuser, distributing the light evenly over the entire frame. This not only optimally illuminates the transparent fan blades, but also the fan's surroundings. This ensures a homogeneous illumination of the entire fan and surrounding areas. How is the fan controlled? The fan is controlled via a 4-pin PWM connector. The fan cable is 23cm long. The Digital RGB LED lighting is controlled via a JST 3-pin connector. The cable of the JST connector is 50cm long and has a splitter at the end, which makes it possible to connect other Digital RGB products with a JST connector in series. This helps to reduce cable chaos and allows you to control all products at the same time via one controller connector. The Alphacool Aurora LUX fan is an all-around carefree package with perfect airflow and outstanding 5V Digital RGB LED lighting. And all functions can be controlled via just one cable on one controller. It could hardly be simpler. Technical data: L x W x H: 92 x 92 x 25 mm Weight: 94 g Speed: 600 - 1800rpm Bearing: Hydraulisch Connection fan: 4-Pin PWM Connection Digital RGB: 3-Pin JSP + 3-Pin 5V Power consumption: 0,14A (1,68W) Cable length PWM: 23 cm Cable length 3-Pin JST: 50 cm Operating oltage: 12V Static pressure: 0,4 - 0,9 H2O Airflow: 23 - 51 m³/h Noise: 17,9 - 32 dB(A) MTBF: 50.000h Download data sheet PDF: Alphacool Eiszyklon Aurora LUX Digital RGB (92x92x25mm)

The Alphacool Eiszyklon Aurora LUX PRO 200mm fan offers a wide control range as well as outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects. Ingenious Lighting The frame is equipped with digital addressable 5V RGB LEDs which illuminate the front of the whole frame. The frame is not completely transparent, but the illumination is done through narrow slits in four places. On the upper side there are two rows of these slits. Each narrow frame runs along the inside and outside of the frame. This creates a unique illumination which looks very noble. Thanks to the recessed light diffusers the light is distributed evenly. This means that Individual LEDs are no longer visible. Wide Control Range and Silent The fan can be controlled from 400 to 800 rpm via the 4-pin PWM connector. At 400 rpm the fan is almost silent, but still offers a good airflow rate as well as a high static pressure. Therefore, the fan can also be used very well on radiators for a wa-ter cooling system. Thanks to the high airflow, the fan is also ideal for ventilating a case. Decouplers are also found directly on the frame. The soft foam padding reduces the transmission of vibrations to the case. A further plus point for the silent capabili-ty of the fan. Connections? The fan is controlled via a 4-pin PWM connector. The cable is 48 cm long. This allows the fan to be connected to the mainboard or a special controller withou t any additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector. Technical data: L x W x H: 200 x 200 x 27 mm Weight: 343 g Speed: 400 - 800rpm Bearing: Rifle bearing Connection fan: 4-Pin PWM Connection Digital RGB: 3-Pin JSP + 3-Pin 5V Cable length fan: 48 cm Cable length Digital RGB: 48 cm Operation voltage fan: 12V Operation voltage Digital RGB: 5V Power consumption: 0,14A (1,68W) Static pressure: 1,3 - 1,52 mm H2O Air flow: 27 - 56 m³/h Noise: 7,4 - 23,7 dB(A) MTBF: 50.000h Download data sheet PDF: Alphacool Eiszyklon Aurora LUX PRO Digital RGB (200x200x25mm)

The Alphacool ES Solution Laing DDC310 pump serves as the foundation for various 1 to 4U server solutions from Alphacool. The unit is based around the very popular Alphacool DDC pump and has been coupled with a simple pump base to maintain compatibility with various Enterprise Solution reservoirs. Compact and powerful. The flat design of the Laing DDC310 pump saves space and fits with the corresponding Enterprise reservoirs from chassis as small as a 1U server rack. This results in a very powerful pump that can be used in the smallest of spaces. The DDC310 variant offers with a delivery height of 2.44m enough power to operate an extensive water loop. The performance is enough to operate a dual or quad socket system including reservoir and radiators. The performance of the pump is also sufficient to operate a render server with up to 4 graphics cards. Spherical Ceramic Bearing The pump uses a shaftless ball motor or spherical bearing. The motor is driven by magnets while the rotor is mounted on a ball-ceramic bearing. This makes the pump maintenance-free, as the bearing is self-adjusting and maintenance-free. The pump is lubricated by the coolant during operation. This makes the Alphacool ES Solution Laing DDC310 pump a so-called wet rotor pump. Due to its design, even small particles of dirt are no problem for the pump. Installation and Commissioning The pump is delivered with a classic plastic bottom which ensures a high compatibility to all Enterprise Solution products. However, the pump can also be mounted on all existing DDC pump tops from Alphacool. The pump comes with a corresponding O-ring, only the mounting screws must be used from the respective reservoir, as these may differ in length. The power is supplied via a 4-pin Molex connector, the speed can be read out via a 3-pin Molex connector. This is usually done via the 3-pin fan connector on the mainboard or via an appropriate fan controller. Technical data: L x W x H: 62 x 62 x 28 mm Weight: 167 g Material: Stainless steel, EPDM, Ceramics Voltage range: 12 V Starting voltage: 12 V Voltage: 12 V DC Power consumption: 10W Max delivery height: 2,28m Max flow rate: 400 l/h Power connector: 4-Pin Molex Speedometer signal: 3-Pin Molex Max working temperature: 60° C Scope of delivery: 1 pcs DDC310 Pump 1 pcs O-ring Plastic bottom Download data sheet PDF: Alphacool ES Solution Laing DDC310 Pump Technical data sheet for DDC310 pump: Please click here!

The Alphacool Rise fan offers a wide range of control as well as superior Digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design can create some unique effects whilst offering performance. Brilliant illumination There are 20 digitally addressable 5V RGB LEDs built into the frame and hub that illuminate the entire fan. This creates a unique illumination that looks very impressive. Thanks to the recessed light diffusers, the light is distributed evenly, and you will not see sporadic uneven lighting. Wide control range and silent The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. In addition, it offers a silent mode, with which the fan can be regulated down to 0 rpm and then they will only start when they are needed above 350rpm. At 800 rpm, the fan is nearly silent, but still offers a good airflow (118.9m3/h) paired with a high static pressure (3.17mm/H2O). This makes the fan perfect for mounting on radiators of a water cooling system or for alternatively, as a case fan. Decouplers are located directly on the corners of the frame. The soft foam pads reduce the transmission of vibrations to the case, which in turn reduces noise. Tear-off edges on the fan blades also provide a significant reduction in noise. Connectors? The fan is controlled via a 4-pin PWM connector. The cable is 40 cm long. This allows the fan to be connected to the motherboard or a fan controller without the need for additional adapter cables or extensions. The digital aRGB LED illumination is controlled via a JST 3-pin connector and adapters are available to change this into a standard 3 pin aRGB connector if required. Note: The cable for connecting the ARGB LEDs is not included in the scope of delivery, but is optionally available in the shop! ( Art. 18604, Alphacool connection cable 3pin to 3pin Digital RGB ) Technical Data fan L x W x H 120 x 120 x 25 mm Speed 0—2500 rpm (+/-10%) Bearing Sleeve Bearing Connection 4-Pin PWM Cable length 40 cm Voltage 12V DC Current consumption. 0,65A (0,72 max) Static pressure 3,17 H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) MTBF 50.000h Speedometer signal Yes Auto-Restart Yes Technical data digital RGB LED type 5V aRGB Connection 3-Pin JST Cable length 50cm (Splitter after 40cm) Max. current consumption LEDs 3,5W LED quantity Frame: 12 / Hub: 8 Download Data sheet PDF: Alphacool Rise Aurora 120 mm fan (120x120x25mm)