Device Location: External ühenduvus tehnoloogia1Klaviatuuri asetus: Inglise Vene External värv1" Windows tablet Package Type: Retail garantii Products Returnable12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 7.5 kg Packs in Box10 EAN Code: 85952481
Roccat Khan Pro kõrvaklapid on loodud just nende kõige eepilisemate hetkede jaoks, asetades Sind täpselt kogu mängukeerise keskpunkti. Kujutle end otse võistlusareenile koos oma meeskonnakaaslastega, energiast pakatamas ja täielikult valmis lahinguks, istudes vastakuti oma vastastega. Sa tunnetad põnevusest pakatavat rahvast ning oled täielikult valmis lahinguks. Khan Pro kõrvaklapid on loodud just selleks hetkeks. Hi-Res helikvaliteet Olles disainitud spetsiaalselt mängurite vajadusi silmas pidades, loob Khan Pro täielikult uue standardi. Tegemist on esimese Hi-Res helikvaliteediga mänguripeakomplektiga ja see toob kasutajani selged, teravad kõrged noodid koos sügava ja võimsa bassiga, mis aitavad vastase asukoha ülitäpselt paika panna lausa mängulise kergusega. Kiired draiverid tahavad täielikult viivitusvabalt toimiva heli ning passiivne mürasummutus tähendab, et kõrvaklappe saab kasutada ka kärarikkas keskkonnas. Ülikerge disain Khan Pro kõrvaklapid ei ohverda oma äärmiselt kerge (230 g) konstruktsiooni juures helikvaliteeti ega vastupidavust. Ergonoomilise disainiga kunstnahaga kaetud memory foam kõrvapadjad järgivad Sinu kõrvade loomulikku kuju ning tagavad seeläbi ülima mugavuse isegi pärast tundidepikkust kandmist. Juhtnupud kõrvapatjadel Mänguritele suunatud disain kumab Khan Pro kõrvaklappide puhul läbi igas detailis. Lisaks tipptasemel helikvaliteedile ja mugavusele ei saa tähelepanuta jätta ka kiirust, millega kõrvaklappe on võimalik juhtnuppude abil reguleerida ning mis tagab ülima jätkusuutlikkuse mängurimaailmas võistlemisel. Kõrvaklapid on varustatud kiire ligipääsuga helitugevuse reguleerimisele ning automaatsele real voice mikrofoni väljalülitamisele, kui mikrofon on peidetud asendis. Robustne disain Khan Pro robustne disain tähendab ülimat vastupidavust tänu roostevabast terasest hingedele ning reguleeritavale raamile, mis on pööratav 95° ulatuses, tagades seeläbi ideaalse sobivuse kõikidele peasuurustele.
DP Ultra is produced from high-quality absultely pure components in germany. It has been specifically designed for the requirements of PC watercooling systems which use often mixed materials like copper and alumnium.The electric conductivity has been reduced to an minimum. The active ingredients also reduce the appearance of bubbles in the cooling fluid and optimizes the heat transfer between the surfaces and the fluid making it ideal for use in watercooling systems. DP Ultra is a clear and virtually odor free water based solution.DP Ultra is directly applicable. We recommend an annual exchange of the coolant.DP Ultra is the result of extensive tests and contains specially selected ingredients to give you an optimum protection against corrosion and ensure an optimum cooling performance.Advice: Please note that the colored Double Protect Ultra fluids appear different inside the canister compared to the real usage in a loop. Compare the second picture to see the difference.
Tootja: Sandberg Tootegrupp: kaablid - USB | FireWire | PS/2 | (e)SATA | ATA USB plugs: 2 x USB-C kaabli pikkus: 1 m kullatud pistikud: Ei kaabli värvus: valge Brutokaal: 120 g Lisaandmed: Supports Kuni 100W power Lisainfo: sandberg.it [LINK]
Uncompressed 1080p60 for the prosExtremeCap UVC is created for DSLR or prosumer-grade video camcorders to improve your streaming,no matter where you go. Compact and convenient for any event, render premium quality images with maximum clarity with the ExtremeCap UVC. Capture any HDMI video source in purely unaltered 1080p60, without any lossy compression
The HEATKILLER® Tube Series is a modular series of high end reservoirs with a glass tube made from borosilicate glass. It has some outstanding features which are listed here. Large filling mouthThanks to a large filling mouth and a bayonet catch lid the HEATKILLER® Tube Series reservoirs can be opened without any tools and is easy to fill. It has never been easier to re-fill a cooling medium. Borosilicate glass tubeBorosilicate is a glass with very high chemical and thermic resistance. It is scratch-resistant and has very low heat expansion. These outstanding features make borosilicate an ideal material for reservoirs. Three sizesTo account for different space availability in current cases, the HEATKILLER® Tube Series reservoir glass tubes are available in sizes 100mm, 150mm and 200mm. Three versionsBesides a standalone version, there are versions with direct connections for pumps. They support D5 and DDC pumps by Lowara (formerly known as Laing) and their derivatives. Large volumeIn designing the HEATKILLER® Tube Series, we took great care not to waste any of the available volume. That makes the HEATKILLER® Tube Series reservoirs very low maintenance, because they need fewer re-fills. Anti- Cyclone-effectThe exclusively developed anti-cyclone-inlay which is located at the bottom of the reservoir prevents vortices that easily form in reservoirs. This reduces noise levels and makes air bleeding easier. Streaming-optimized pump chambersThe pump adapter for D5 and DDC pumps comes with a streaming optimized pump chamber. This causes fewer vortices during use, which has a positive effect on both flow rate and air bleeding. Made in GermanyThe HEATKILLER@ Tube Series reservoirs are completely produced in Germany. Extensive optional accessoriesThe HEATKILLER@ Tube Series reservoirs have various optional features, for example: Variable Mounting systemsFor optimal integration into a water cooled system we offer different mounting systems to fit your build. …horizontal mount (pedestal)Two different height pedestals are available for mounting the HEATKILLER@ Tube Series reservoir to the case floor or free-standing. … vertical mountA multifunctional bracket mount offers options for vertical montage. Several adapters are available. Some can be used to attach the reservoir to 120x120mm or 140x140mm cooler slots. Others allow for a montage of the reservoir on a radiator from the MO-RA3 series. IlluminationHEATKILLER@ Tube Series reservoirs can be set in scene with LED illumination. We offer splash-safe LED strips in various colors. The strips are hidden in the struts of the reservoir cage. Colored strutsTo customize your HEATKILLER@ Tube Series you can exchange the default struts. We offer aluminum struts in natural color or with a choice of anodized colors. Technical data Material cover: POM Material struts: black anodized aluminium Tube: borosilicate glass Material bottom: POM Material Inlay: stainless steel Measurements (L x W x H): 70 x 70 x 148,5 mm Tube length: 100mm Tube diameter: 65mm Capacity: aprox. 250ml Weight: aprox. 640g Seal: NBR, VMQ Connection thread: 2x G ¼ inch (DIN ISO 228-1) Scope of delivery: 1x HEATKILLER® Tube 100 1x manual
This pump is the first pump worldwide which is used in mass-produced water cooled workstations and is ideal for the watercooling of processors and electronic components. Due to its compact size and its power it can be used for many applications. This DC pump is an electronically commuted ball motor pump with an estimated lifespan of more than 50.000hrs at 12V. The only moving part on the pump is the spherically shaped Rotor unit which is sitting on an ultra-hard, wear-resistant ceramics bearing ball. A conventional shaft with bearings and seals is not used or needed. The spherical bearing of the rotor unit on the ceramics bearing ball has many advantages: The development of bearing clearance is technically impossible which results in the impossibility of noise level increase over the lifespan of the pump. The bearing is self-adjusting, making the pump consistently quiet in operation over the full lifespan. The pump is directly lubricated by the coolant (wet-running pump). Therefore no maintenance is required. As the rotor is magnetically held in place even small dirt particles pose no problem for the mechanism, a blocking of the pump is not possible under normal operating conditions. Even after a long period of standstill reliable operation is ensured. The permanent magnetic rotor unit is frictionlessly driven by a magnetic field which is produced by the surrounding stator. The stator is completely built around the rotor, therefore the pump is with its 38mm only slightly higher than the stator unit. It therefore fits a in almost any PC case, may it be Super tower or Barebone. A separate magnetic shielding is usually not required. The ball motor principle allows powerful yet power-saving operation. The pump can be regulated by power variations of the DC operating voltage over a wide range. All parts in touch with the coolant are completely corrosion free. Technical details: Dimensions (WxDxH): 62x62x38mm (without fittings) Motor: Electronically commuted ball bearing motor Nominal voltage: 12V DC Nominal power consumption: 18W Certified voltage: 6 to 13,2 Pressure head at 12V: 4,7m Maximum flow rate: 600l/h Coolant: Water /Glycol/Glycol mixtures Maximum system temperature: 60°C Materials in contact with the coolant: Stainless steel 1.4571, PPS-GF40, EPDM O-Rings, Aluminium oxide, hard coal Fittings: 2x 3/8" barbed fittings (For hoses with an outer diameter of 10mm and 8mm inner diameter) Pumpentacho: Mit 3-Pin Molex Stecker als Pumpentachoausgang (für Mainboards oder Steuergeräte) Hinweis: Die Pumpe ist die neusten Revision. WICHTIG: Wir empfehlen die Verwendung von schmierfähigem Wasserzusatz (wie z.B. AT Protect Plus oder Innovatek Protect). Anti-Corro-Fluid ist nicht zu empfehlen. ACHTUNG: Aufgrund der Leistung der Pumpe darf die nur in einem Kreislauf mit min. 1 Kühler betrieben werden. Beim Betrieb ohne Last kann die Pumpe durchbrennen. Important: The Laing pump's electronics are not waterproof. Please make sure that the electronic components do not come in contact with water during installation or when working on the pump. When replacing the top always ensure a proper fit of the O-ring seal and avoid spills when filling the Laing reservoir. Damages due to water in the electronic components are not replaced by Laing! Why are there Swiftech and Laing Versions? Are they different? The latter question can be answered quickly: No! Here an explanation: Lain produces all pumps in Hungary. They are just labelled differently for Overseas markets and the European market. The pumps themselves are threfore exactly identical. The overseas version has Swiftech as a distributor and the European version is neutrally black. The cheaper Swiftech pumps are usually shipped with decouplers, the Laing pumps usually not. The power, pressure head, flow rates. etc. are exactly the same. This product has been tested for you: Aquainfos Overclockingstation Userreview im Liquidluxx inkl. Video. Awardfabrik Hardware-academy M4GIC Bedienungsanleitung (DE, EN) Please note: Pump control possible with Heatmaster! Note: For pump control via the Heatmaster the Alphacool pump adaptor cable (Item No. 52171) is required!
High Quality Matte Silicone Back case for mobile phone. Modern design, full compatibility by model. Case have all necessary holes for speakers, camera, microphone.
This temperature sensor is equipped with a G1/4" inner- and a G1/4" outer thread and can therefore be integrated easily even directly on a waterblock or radiator. The sensor is equipped with a 60cm long cable and has a two-pin plug for connection. Technical details: Connection thread G1/4" Main body nickel coated brass Cover ring Delrin Cable length: 60cm Inner diameter: 7,95mm Compatible with: aquaero 5 XT / PRO / LTaquaero 3.07, aquaero 4.00 aquastream XT Ultra aquaduct versions iwth an external sensor connector (360XT, 720XT) Sensor inputs on many Mainboards etc. Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer
Three-core cable for connecting the flow sensor to the aquaero. Length approx. 30 cm, plug on both sides (special plug on the sensor). The cable can be extended if required using a standard 3-pin fan extension cable. The matching connection cable for the flow sensor G1/4" (3.3mm) article number: 71004 & flow sensor G1/4 (5.6mm) (without cable) article number: 71045
Mounted on an poweradjust 3 controller, this passive heat sink improves heat dissipation and thereby increases the maximum power output of the fan channel. Scope of delivery:Aluminum heat sink for poweradjust 3Thermally conductive padMounting materialCompatible with:poweradjust 3 (52247/52246)Please note: poweradjust 3 is not included in delivery! Not compatible with bezel sets 52179/52183!
Premium Pro Kabel-Set von CableMod, Textil-Sleeving aus ModMesh-Material, für Corsair-Netzteile der Serien RMi / RMx / RM (schwarzes Etikett), insgesamt neun Sleeve-Kabel, 50 - 85 cm Länge
Certified Hi-Res DAC and amp for gaming: Transforms any PC or PS4 into a high fidelity audio system —
Includes the legendary ESS Sabre DAC for unsurpassed audio quality —
Gaming’s first certified Hi-Res Audio DAC with support for 96 kHz / 24-bit audio —
Works with all headphones and headsets with a universal 3.5mm jack —
Next-generation DTS Headphone:X v2.0 surround sound
