Câble de brassage à paires torsadées avec connecteurs RJ45Cat.6A S/FTP PIMF, TPEConnecteur intégré sans accroc pour la protection du verrouPlaqué ou broches pour une meilleure conductivité et l'élimination de la perte de signalGarantie de 10 ansCâble réseau S/FTP Cat.6A avec prise en charge d'une bande passante allant jusqu'à 500MHz et doté d'un design anti-accroc et des contacts plaqués or, pour normes Ethernet jusqu'à 10 GBase-T.Câble Cat.6A, blindé avec tresse comme blindage général et blindage pour les différentes paires de conducteurs (S/FTP). Les câbles Cat.6A répondent aux exigences du 10 Gigabit Ethernet (10GBaseT) avec une fréquence de fonctionnement allant jusqu'à 500MHz. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés anticorrosion garantissent des connexions fiables sur le long terme. La conception robuste et le système anti-accroc du connecteur évite d'endommager le loquet lors de l'installation et de la déconnexion.Le TPE utilisé comme matériau pour la gaine offre une flexibilité accrue et facilite la manipulation des câbles.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Vasest kaabel (CU), halogeenivaba kaabli ümbris (LSZH)Topeltvarjestatud LAN-kaabel 2x RJ45 pistikutega võrgukomponentide ühendamiseksCAT 6A võrgukaabel, mis sobib 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s jaoks.S/FTP üldvarjestus: üksikute juhtmepaaride (PiMF) alumiiniumfooliumiga varjestus ja kaabli mantli alumiiniumpunutisega varjestus.Kvaliteetne vasest kaabel (CU) ja 3µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse.Painutuskaitse ja tugev kate kaitsevad võrgukaablit tõhusalt purunemise eest.RJ45-pistikute lukustuskaitse takistab lukustuse kinnijäämist või katkemist, aidates tagada usaldusväärset internetiühendust.Võrgukaabel on CAT 6A testitud (koos katseprotokolliga) ja sobib Power over Ethernet (PoE,PoE+) jaoks.
Vasest kaabel (CU), halogeenivaba kaabli ümbris (LSZH)Topeltvarjestatud LAN-kaabel 2x RJ45 pistikutega võrgukomponentide ühendamiseksCAT 6A võrgukaabel, mis sobib 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s jaoks.S/FTP üldvarjestus: üksikute juhtmepaaride (PiMF) alumiiniumfooliumiga varjestus ja kaabli mantli alumiiniumpunutisega varjestus.Kvaliteetne vasest kaabel (CU) ja 3µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse.Painutuskaitse ja tugev kate kaitsevad võrgukaablit tõhusalt purunemise eest.RJ45-pistikute lukustuskaitse takistab lukustuse kinnijäämist või katkemist, aidates tagada usaldusväärset internetiühendust.Võrgukaabel on CAT 6A testitud (koos katseprotokolliga) ja sobib Power over Ethernet (PoE,PoE+) jaoks.
Vasest kaabel (CU), halogeenivaba kaabli ümbris (LSZH)Topeltvarjestatud LAN-kaabel 2x RJ45 pistikutega võrgukomponentide ühendamiseksCAT 6A võrgukaabel, mis sobib 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s jaoks.S/FTP üldvarjestus: üksikute juhtmepaaride (PiMF) alumiiniumfooliumiga varjestus ja kaabli mantli alumiiniumpunutisega varjestus.Kvaliteetne vasest kaabel (CU) ja 3µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse.Painutuskaitse ja tugev kate kaitsevad võrgukaablit tõhusalt purunemise eest.RJ45-pistikute lukustuskaitse takistab lukustuse kinnijäämist või katkemist, aidates tagada usaldusväärset internetiühendust.Võrgukaabel on CAT 6A testitud (koos katseprotokolliga) ja sobib Power over Ethernet (PoE,PoE+) jaoks.
Cat.6 S/FTP network cable with support for bandwidth up to 250 MHz and features a snagless design with gold plated contacts for Ethernet standards up to 1GBase-T. Cat.6 cable for operating frequencies up to 250 MHz in shielded version with braid as overall shield and foil shield for the individual wire pairs (S/FTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag. The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
Sääsepeletaja ja akupank - kaks ühes. Väga kompaktne ja kerge, sääsepeletus funktsioon kuni 12 tundi. Sisseehitatud aku mahtuvusega 10400mAh. Input-output 18W. Mõjuala õues 6,1m ja siseruumides 3,3m ja
Multifunktsionaalne ventilaator, sellel on kolm puhumise reziimi. Lisaks on ka kolm valgustugevuse reziimi. Ventilaatori saab asetada reguleeritavale kolmjalale või riputada lakke. Ühtlasi saab teda kasutada akupangana!
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Socket 16mmThis connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 16mm. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 21mm Height: 18mm Scope of Delivery: 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - Chrome
With the "Icicles", Alphacool has created a true masterpiece. These connections promise absolute tightness and high quality. Suitable for all hard metal pipes with an outer diameter of 12mm. On the other side of the connection there is the usual ¼” thread. Available in deep black and chrome. First, the union nut is put on the pipe, followed by a plastic washer that protects the O-ring and the thick O-ring itself. Now the pipe is simply put into the connection in which the second O-ring is already sitting, which fits very tightly against the pipe. As a last step, the union nut is pushed onto the connection and screwed on. Due to the size, the union nut cannot be screwed on tightly enough. But this has also been thought of, as an 8 mm hexagon key can be inserted from below to hold the connection in place. scope of delivery 1x Alphacool Eiszapfen 12mm HardTube screw-on nozzle G1/4 - Deep Black
With the new compression fittings from Alphacool for Plexi, brass or carbon tubes, Alphacool is taking a further step towards perfection and quality. The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes! The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again. The Function of this Connector is:This connector is used to connect two 13mm Plexi, brass, or carbon tubes at a 90° angle. Dimensions: Width: 38mm Height: 38mm Technical Details: Material: brass, chromatized Colour: deep black Scope of Delivery: 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Deep black
With the new compression fittings from Alphacool for Plexi, brass or carbon tubes, Alphacool is taking a further step towards perfection and quality. The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes! The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again. The Function of this Connector is:This connector is used to connect two 16mm Plexi, brass, or carbon tubes at a 90° angle. Dimensions: Width: 41.5mm Height: 41.5mm Technical Details: Material: brass, chromatized Colour: chrome Scope of Delivery: 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Chrome
With Alphacool’s new compression fittings for plexi, brass, or carbon tubes, Alphacool is taking another step in the direction of perfection and quality. The first two colours, chrome and deep black, offer a great variety to suit many tastes. The fully coordinated product series gives every system a chance to shine, and the customization options are endless when paired with Alphacool plexi-brass tubes! A new chromatization technique binds the colouring tightly to the brass surface. This improves the longevity of the intense colour and prevents any chipping of the chrome layer. Blue Alphacool lettering on some of the connectors also highlights the uniqueness of these parts. The function of these connectors is: This connector can be used to connect a 16mm plexi, brass, borosilicate glass, or carbon tube to a G1/4" thread. Sixpack: Since six connectors of one kind are often necessary, Alphacool is now offering Sixpacks. This has a lot of advantages for you! Technical Details: Material: chromatized brass Colour: deep black Scope of Delivery: 1x Alphacool HT 16mm HardTube compression fitting G1/4 for plexi-brass tubes (rigid or hard tubes) - knurled - deep black sixpack
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 26 mm Height: 23 mm Thread: G1/4" Thread length: 5 mm HardTube size: 16 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,042 kg Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Chrome
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 26 mm Height: 23 mm Thread: G1/4" Thread length: 5 mm HardTube size: 16 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,042 kg Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Chrome Sixpack
The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.AssemblyRemove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.Technical data:L x D: 22.2 x 22 mmThread length: 5 mmMaterial: BrassConnection thread: G1/4".Colour: BlackCompatible with all HardTubes with 14mm outer diameter.Download data sheet PDF: Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - deep black
The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.AssemblyRemove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.Technical data:L x D: 22.2 x 22 mmThread length: 5 mmMaterial: BrassConnection thread: G1/4".Colour: ChromeCompatible with all HardTubes with 14mm outer diameter.Download data sheet PDF: Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - chrome
The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.AssemblyRemove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.L x D: 22.2 x 22 mmThread length: 5 mmMaterial: BrassConnection thread: G1/4".Colour: ChromeCompatible with all HardTubes with 14mm outer diameter.Download data sheet PDF: Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - chrome sixpack
Hochwertiger Schlauch aus Polyurethan (PUR) passend zu den Steckverbindern. Relativ enge Biegeradien sind möglich bei gleichzeitig guter Festigkeit. Dieser Schlauch wurde extra für Wasserkühlungen entwickelt, und speziell den Anforderungen angepasst. Farbe: glasklar Abmaße: Außendurchmesser: 8mm, Innendurchmesser 5,5mm Preis je Meter, Lieferung am Stück, Bestellmenge = Schlauchlänge in Metern.
Alphacool’s new quick connectors, called the “Eiszapfen” (icicle), are the newest addition to the “Eis” series. High quality and impressive features take every water cooling system a step forward in quality and practicality! A quick-release connector can be used anywhere where expandability, flexibility, or cleanliness play a big role. The compact connectors have a 1/4” thread on both sides, making them compatible with all standard components. The connectors can be separated by pulling down the outer rings. Both sides immediately shut completely, so that no water can leak out. The special N.D.S.L. technology (no drip, no splash, no leak) ensures no water drips, splashes or leaks out while opening the connectors. When the pieces are reconnected, both sides audibly click together and are locked tightly with a double o-ring, which is simply pressed together when reconnecting. This also prevents any deterioration of the o-ring. The mechanism was also designed for longevity, to ensure a secure connections even after several years. Many quick connectors tend to compromise the flow rate. But Alphacool has found a way to solve this problem. These quick connectors can still sustain a high flow rate! Alphacool’s quick connectors are available in two models. In deep black and completely chromatized versions, they fit seamlessly into any system. Technical Specifications: Dimensions (L x D): 64.6 x 23.9mm Material: brass Colour: chrome Thread: 2x 1/4” inner Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit with double bulkhead G1/4 inner thread - chrome Notice: The quick connectors should not be used dry for prolonged periods, as this will put stress on the o-rings and leak tightness can no longer be guaranteed.
Produktbeschreibung:Doppelnippel von G3/8" Aussengewinde auf G1/4" Innengewinde. Technische Daten:Höhe 19mm. Hinweis: Um diese Adapter 100%ig dicht zu bekommen empfehlen wir ihnen die verlinkte Dichtung. Dieses Produkt wurde für Sie getestet:OCReviews
This nipple can be used to connect two G1/4 inch threads together. Delivery includes O-rings Technical data Connecting element with 2x G1/4 external thread Material: nickel-plated brass Inner diameter: 8mm Total length: 19mm Inner length without thread: 7mm scope of delivery 1x double nipple G1/4 AG to G1/4 AG
Make your water cooling loop more practical and easier to modify with the new Alphacool Eiszapfen quick release fittings. High CompatabilityThe Alphacool Eiszapfen are compatible with all components as they have a ¼" external thread. You connect them exactly where you need them. Use them on radiators, reservoirs, pump tops or other suitable threads. Nothing can stop your ideas! Individual, like your systemLet your water cooling be special! For the first time, you decide whether you only need the plug, the coupling or both. Thanks to the separate Male or Female connectors you can add your Alphacool Eiszapfen to your existing system or build a new one. No Drip - No Splash - no leakAlphacool relies on the proven N.D.S.L. technology for its Eiszapfen series. This gives you the freedom to uncouple your running system without letting it drip. Turn your normal water cooling system into a high-flow system! High-quality Materials The Alphacool Eiszapfen are made of high-quality brass in two colours, Chrome or Deep Black. Technical details Dimensions: 86 x 32 x 32mm Weight: 0,040 kg
Make your water cooling loop more practical and easier to modify with the new Alphacool Eiszapfen quick release fittings. High CompatabilityThe Alphacool Eiszapfen are compatible with all components as they have a ¼" external thread. You connect them exactly where you need them. Use them on radiators, reservoirs, pump tops or other suitable threads. Nothing can stop your ideas! Individual, like your systemLet your water cooling be special! For the first time, you decide whether you only need the plug, the coupling or both. Thanks to the separate Male or Female connectors you can add your Alphacool Eiszapfen to your existing system or build a new one. No Drip - No Splash - no leakAlphacool relies on the proven N.D.S.L. technology for its Eiszapfen series. This gives you the freedom to uncouple your running system without letting it drip. Turn your normal water cooling system into a high-flow system! High-quality Materials The Alphacool Eiszapfen are made of high-quality brass in two colours, Chrome or Deep Black. Technical details Dimensions: 86 x 32 x 32mm Weight: 0,068 kg
Make your water cooling loop more practical and easier to modify with the new Alphacool Eiszapfen quick release fittings. High CompatabilityThe Alphacool Eiszapfen are compatible with all components as they have a ¼" external thread. You connect them exactly where you need them. Use them on radiators, reservoirs, pump tops or other suitable threads. Nothing can stop your ideas! Individual, like your systemLet your water cooling be special! For the first time, you decide whether you only need the plug, the coupling or both. Thanks to the separate Male or Female connectors you can add your Alphacool Eiszapfen to your existing system or build a new one. No Drip - No Splash - no leakAlphacool relies on the proven N.D.S.L. technology for its Eiszapfen series. This gives you the freedom to uncouple your running system without letting it drip. Turn your normal water cooling system into a high-flow system! High-quality Materials The Alphacool Eiszapfen are made of high-quality brass in two colours, Chrome or Deep Black. Technical details Dimensions: 86 x 32 x 32mm Weight: 0,068 kg
Product description: L-connector with 1x G1/4 inch internal thread and 2x G1/4 inch external thread Technical data: Material: nickel-plated brass Dimensions: Upper T length: 50mm Left & bottom thread: 12mm Right internal thread: 15mm Height: 31mm Note: To make these adapters 100% leak-proof, we recommend using Phobya thread sealing tape.
Our trusted fittings are available in a whole new design! Robust high-quality reducing socket from G1/4" inner thread to G3/8" outer thread. Technical details: Material: Brass, black nickel coated Thread size: 1/4" inner thread to 3/8" outer thread Extent of delivery: Reducing socket
Make your liquid cooled system more practical and easier to maintain with your new Eiszapfen quick release fittings. With this fitting you can combine different versions of the quick-release connector. There are versions with bulkhead connections, with G1/4" external thread or with G1/4" internal thread. This allows you to create the best solution for your own project. No drip - no splash - no leak Alphacool uses the proven N.D.S.L. technology (no dripping, no splash, no leaking) for its Eiszapfen series. This leaves you the freedom to decouple in your running system without dripping. Turn your normal water cooling system into a high flow system! The Eiszapfen quick release fittings are separated by simply pulling the connecting ring. The Alphacool Eiszapfen quick-release fasteners are available in various designs, but can all be combined with each other. A quick-release fastener always consists of two fittings. You always need the right counterpart to create a complete quick release fastener. With this product you only get 1 half of the quick-release fastener. Technical details: Colour: Chrome Thread: G1/4 Material: brass Diameter: 21 mm Length: 40 mm Weight: 0,035 kg
Make your liquid cooled system more practical and easier to maintain with your new Eiszapfen quick release fittings. With this fitting you can combine different versions of the quick-release connector. There are versions with bulkhead connections, with G1/4" external thread or with G1/4" internal thread. This allows you to create the best solution for your own project. No drip - no splash - no leak Alphacool uses the proven N.D.S.L. technology (no dripping, no splash, no leaking) for its Eiszapfen series. This leaves you the freedom to decouple in your running system without dripping. Turn your normal water cooling system into a high flow system! The Eiszapfen quick release fittings are separated by simply pulling the connecting ring. The Alphacool Eiszapfen quick-release fasteners are available in various designs, but can all be combined with each other. A quick-release fastener always consists of two fittings. You always need the right counterpart to create a complete quick release fastener. With this product you only get 1 half of the quick-release fastener. Technical details: Colour: Deep Black Thread: G1/4" Material: brass Diameter: 24 mm Length: 42 mm Weight: 0,064 kg
This extension (G1/4" outer thread to G1/4" inner thread can be used to extend connection threads and therefore allows easier use of angled fittings. E.g. the output hose can therefore be mounted in the same direction as the hose for the Input as the fitting are at different heights. Color: Silver nickel coated Height without thread: 10,1mm Thread length: 4mm Extent of delivery: Extension G1/4" to G1/4" knured - silver nickel Please note: This knurled extesion is shipped with a seal
Make your liquid cooled system more practical and easier to maintain with your new Eiszapfen quick release fittings. With this fitting you can combine different versions of the quick-release couplings. There are versions with bulkhead connections, with G1/4" external thread or with G1/4" internal thread. This allows you to create the best solution for your own project. No drip - no splash - no leak Alphacool uses the proven N.D.S.L. technology (no dripping, no splash, no leaking) for its Eiszapfen series. This leaves you the freedom to decouple in your running system without dripping. Turn your normal water cooling system into a high flow system! The Eiszapfen quick release fittings are separated by simply pulling the connecting ring. The Alphacool Eiszapfen quick-release fasteners are available in various designs, but can all be combined with each other. A quick-release fastener always consists of two fittings. You always need the right counterpart to create a complete quick release fastener. With this product you only get 1 half of the quick-release fastener. Technical details: Colour: Chrome Thread: G1/4" Material: brass Diameter: 24 mm Length: 42 mm Weight: 0,064 kg
Make your liquid cooled system more practical and easier to maintain with your new Eiszapfen quick release fittings. With this fitting you can combine different versions of the quick-release couplings. There are versions with bulkhead connections, with G1/4" external thread or with G1/4" internal thread. This allows you to create the best solution for your own project. No drip - no splash - no leak Alphacool uses the proven N.D.S.L. technology (no dripping, no splash, no leaking) for its Eiszapfen series. This leaves you the freedom to decouple in your running system without dripping. Turn your normal water cooling system into a high flow system! The Eiszapfen quick release fittings are separated by simply pulling the connecting ring. The Alphacool Eiszapfen quick-release fasteners are available in various designs, but can all be combined with each other. A quick-release fastener always consists of two fittings. You always need the right counterpart to create a complete quick release fastener. With this product you only get 1 half of the quick-release fastener. Technical details: Colour: Deep Black Thread: G1/4" Material: brass Diameter: 24 mm Length: 42 mm Weight: 0,064 kg
The Alphacool HF quick release coupling set TPV with two G1/4" male threads can be screwed directly onto components. Instead of mounting the quick connector on a tube via connectors, it can now be placed directly on a radiator or cooler to save space. Made of nylon and not brass?Nylon is extremely strong and the entire quick disconnect is ultra-lightweight with a total weight of only 20g. Additionally, nylon is non-conductive. This means you don't have to worry about the quick release coming into contact with any components during installation. This is because the temperature resistance of nylon is also extremely high. Twist lock instead of click lockThe connector is compatible with all previous quick-release fasteners with twist locks. Furthermore, it offers a higher level of safety compared to a click lock, as it cannot pop open due to incorrect handling. The fixed screw connection cannot come loose without direct action. Thus, the quick-release fastener always remains firmly closed. Double O-ring systemWhen closing the quick release, another O-ring is used in addition to the normal O-ring for safety. This is to protect against two possible problems. If for some reason the first O-ring should malfunction, a second O-ring secures the quick release to prevent water from escaping. When opening the quick release, it is easy to see a defect in the first O-ring. If you accidentally do not close the thread 100% when closing the quick release, then the second O-ring can also prevent leakage.The Alphacool HF quick release coupling set is compatible with all Alphacool Eisbaer AIO systems, all Eissturm sets and the external cooling solution Eiswand. Technical dataL x D: 65 x 28,2 mmNet weight: 20 gMaterial: NylonThreads: 2 x G1/4“ OTThread length: 5 mmClosure: Twist lockDownload data sheet PDF: Alphacool HF quick release connector kit G1/4 OT/OT
Connection element with G1/4" inner threads on both sides for endless application. Technical specifications: Inner thread G1/4" to inner thread G1/4" Material: Nickel plated brass Length: 16,5mm Diameter: 17mm Extent of delivery: 1x Bushing G1/4 to G1/4" knurled
Connection element with G1/4" inner threads on both sides for endless application. Technical specifications: Inner thread G1/4" to inner thread G1/4" Material: Black nickel plated brass Length: 16,5mm Diameter: 17mm Extent of delivery: 1x Bushing G1/4 to G1/4" knurled
Our trusted fittings are available in a whole new design! Robust high-quality connector piece with three G1/4" inner threads. Technical specifications: Material: Brass, silvernickel coated Thread size: 3x 1/4" inner thread Extent of delivery: 1x Angled G1/4" connector piece 3x G1/4" inner threads Note: To ensure a perfect seal we recommend the use of Phobya thread sealing tape.
Double nipple for connecting 2x 1/4 inch internal threads. This double nipple can be used to connect different adapters to each other, for example. It can also be used to connect certain coolers together. This double nipple has an O-ring on both sides and therefore offers optimal security for your system. Since the thread length including the seal is only 4mm, this increases the area of application even further. The gap of just 3mm is edged and is therefore very suitable for assembly without tools. Technical details: Material: nickel-plated brass Total length: 11.5mm Thread length: 4mm Spacer: 3mm Scope of delivery: 1x double nipple G1/4 AG to G1/4 AG with O-ring - black nickel
This G1/4" extension can be used to extend a thread further out. This makes it possible to use angled connectors more versatile and offers many more possibilities! Technical specifications: Colour: Silver nickel Length: 20mm This adaptor is shipped with a seal!
