Firma: Arvutitark OÜ

The Eisschicht from Alphacool can, like other thermal pads, compensate for the irregularities of heat sinks and the elements to be cooled. But it has a great feature: The Eisschicht consists of thermal paste with an embedded mesh! This ensures that the performance of these pads is much more efficient than normal thermal pads, regardless of the low W/mK value. In addition, a better distribution and filling between the surfaces is achieved. This also results in better air displacement. Due to their soft consistency, there is also no pressure on components or solder joints. Nvidia also uses this kind of pads for the Founders Edition. The Eisschicht can be easily cut to the desired size and attached to heat sinks without slipping.As a basic component or spare part, thermal pads belong in every well-organized computer tinkering corner! Technical dataDimensions (L x W x H)100 x 100 x 0,5mmThermal conductivity3 W/mKElectrical ConductiveNoColorwhite

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)100 x 100 x 1mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight40 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 3mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight28 gColorGrey

The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)50 x 50 x 2mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight19 gColorGrey

The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 120 x 20 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,4 g/cc Thermal Conductivity ASTM D5470 11.0 W/mK Hardness ASTM 2240 72 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 7,2 MHz Dielectric Breakdown Voltage ASTM D149 14 kV/mm Flame Rating UL 94 V-0 Weight 20 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 11W/mk 2x 120x20x1mm

The Eisschicht Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. These Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Ultra Soft thermal pads acts similar to a thermal paste. While normal thermal pads are only pressed together by the contact pressure there can be areas that are uneven due to different high components, making them less effective. With the ultra soft Eisschicht this problem doesn’t exist because the material distributes itself similar to thermal paste and thus prevents the highest components from being subjected to increased contact pressure by the cooler. As standard thermal pads are quite stiff they can also cause too much pressure on components. In the worst cases, this can cause the PCB to bend and even break. Due to the soft consistency of the Ultra Soft Eisschicht any excess material can spread out rather than cause problems. The Ultra Soft Eisschicht is not only performance orientated, but also safer!But this is not the only advantage!Moreover, the special material cannot dry out. Usually the silicone in thermal pads bleeds out over time. This makes them hard and the performance of the pads drops rapidly from a certain point. This is not the case with the Ultra Soft Eisschicht. They can be used over a much longer period of time without significantly losing performance.A thermal pad with fabric?The consistency of the heat conducting material is similar to a viscous heat conducting paste. A special fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures a perfect distribution of the material if the element to be cooled has an uneven shape. Examples include voltage transformers, VRam and similar electronic components of all kinds that require cooling.Cutting? No problem!To cut the thermal pads to size, you should definitely leave the foil on the pads. So the pads can easily be cut to size with a pair of scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. Technical dataL x W x H100 x 100 x 1,5mmSpecific Gravitiy ASTM D2972,65 g/ccThermal Conductivity ASTM D54703.0 W/mKHardness ASTM 224020 Shore 00Working temperature40 to 200°COutgassing ASTM E5950,40% TMLVolume Resistivity ASTM D2576.2X10 high 13 Ohm-meterDielectric Constant ASTM D1505,5 MHzDielectric Breakdown Voltage ASTM D149>5000 VACFlame Rating UL E33110094 V0Colorwhite

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)17.8 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)6×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)4 KV/mm (±10%)Density (ASTM D792)3.5 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorlight grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)120 x 20 x 0,5mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Alphacool offers a wide range of thermal pads for effective heat dissipation of electric components. Among these, the Apex thermal pad is the most powerful option. It can reliably dissipate heat and is versatile due to its strong compressibility.Powerful!Alphacool's Apex thermal pad is a silicone-based ultra-soft thermal pad with optimal compressibility. Due to its low hardness and natural stickiness, it perfectly adapts to surfaces, compensates for irregularities between components, and significantly improves heat transfer.Increased lifespan!Thanks to its unique material composition, the Apex thermal pad has a significantly reduced risk of silicone bleeding. It is capable of reliably cooling for a much longer period than conventional thermal pads without significant performance losses.Versatile!Due to its excellent electrical insulation, the thermal pad is also suitable for cooling electric components in a variety of devices, including electric vehicles, autopilot systems, mobile phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunications devices, access points, memory modules, and much more. Technical data thermal padDimensions (L x W x H)100 x 100 x 1mmThermal Conductivity (ASTM D5470)16.6 W/mK (±10%)Hardness (ASTM D2240)65 (Shore 00) (±5)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)5×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)5 KV/mm (±10%)Density (ASTM D792)3.6 g/cm³ (±10%)Elongation (ASTM D412)20%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colordark grey

Thermal Hero GAMMA Phase Changer – Phase Change Thermal Interface Material (TIM) Discover a new era of cooling with the Thermal Hero GAMMA Phase Changer. This liquid thermal pad combines high thermal conductivity with excellent cooling performance and is perfectly suited for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. High thermal conductivity through phase change More efficient heat transfer Self-adapts to contact surface – optimal fit Clean application thanks to fast, adhesive layer on one side Consistent performance under varying loads User-friendly and pressure-activated Low material thickness / slim profile Includes cleaning cloth for easy surface preparation Cuttable, ideal for overclocking GAMMA is characterized by its unique ability to change from solid to semi-solid at operating temperatures above 44 °C. This phase change completely fills microscopic gaps and surface irregularities, ensuring optimal heat transfer and reliable cooling—especially under high thermal loads. Applications: CPUs and GPUs Heatsinks in PCs, laptops, and graphics cards Electronic components with high heat output Overclocking scenarios that require maximum cooling performance Application instructions: Use the adhesive side and clean the surface (with the included cleaning cloth) Cut the pad and apply it precisely Activate with pressure to ensure even distribution

Thermal Hero GAMMA Phase Changer – Phase Change Thermal Interface Material (TIM) Experience a new era of cooling with the Thermal Hero GAMMA Phase Changer. This phase change thermal pad combines high thermal conductivity with excellent cooling performance, making it perfect for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. High thermal conductivity through phase change More efficient heat transfer Self-adapts to the contact surface – perfect fit Clean application thanks to fast, adhesive coating on one side Consistent performance under variable load User-friendly and pressure-activated Thin material / low profile Includes cleaning wipe for easy surface preparation Cuttable, ideal for overclocking GAMMA is characterized by its unique ability to change from solid to semi-solid at operating temperatures above 44 °C. This phase change completely fills microscopic gaps and surface irregularities, ensuring optimal heat transfer and reliable cooling—especially under high thermal demands. Applications: CPUs and GPUs Heatsinks in PCs, laptops, and graphics cards Electronic components with high heat output Overclocking scenarios where maximum cooling is required Instructions for use: Use the adhesive side and prepare the surface cleanly (with the included cleaning wipe) Cut the pad to size and apply precisely Apply pressure to ensure even distribution

THERMAL HERO Graphene Sheet 100x100x0.025mm Discover the future of thermal management with the THERMAL HERO Graphene Sheet. The ultra-thin graphene film offers outstanding thermal conductivity and powerful cooling performance – ideal for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. Very high thermal conductivity Extremely thin: 0.025 mm layer thickness for minimal heat absorption Intensive cooling performance even under heavy loads Long-term stability and corrosion resistance Easy application thanks to fast-adhering adhesive layer on one side Includes cleaning cloth, pressure-activatable and cut to fit Suitable for overclocking Note: Caution: Electrically conductive! Applications: CPU/GPU cooling, heat sinks in PCs, laptops, gaming consoles, and electronics with high heat demands Overclocking scenarios where maximum cooling performance is required Why Graphenex? Graphenex utilizes the exceptional properties of graphene – extreme thermal conductivity, high flexibility, and light weight – for efficient and reliable cooling in an ultrathin format. With thermal conductivity that is among the leaders in this category, Graphenex meets even the highest thermal requirements. Application notes: Use the adhesive side, clean surfaces beforehand If desired, cut to size and apply precisely If necessary, apply gentle pressure to achieve even distribution

THERMAL HERO Graphene Sheet 32x32x0.025mm Discover the future of thermal management with the THERMAL HERO Graphene Sheet. This ultra-thin graphene film provides outstanding thermal conductivity and strong cooling performance—ideal for computers, PCs, electronics, gaming consoles, laptops, and graphics cards. Very high thermal conductivity Extremely thin: 0.025 mm layer thickness for minimal heat absorption Intensive cooling performance even under heavy loads Long-term stability and corrosion resistance Easy to apply thanks to the fast-adhering adhesive layer on one side Includes cleaning cloth, pressure-activated, and can be cut to size Suitable for overclocking Note: Caution: Electrically conductive! Areas of application: CPU/GPU cooling, heatsinks in PCs, laptops, gaming consoles, and electronics with high heat demands Overclocking scenarios where maximum cooling performance is required Why Graphenex? Graphenex utilizes the exceptional properties of graphene—extreme thermal conductivity, high flexibility, and low weight—for efficient and reliable cooling in an ultra-thin format. With industry-leading thermal conductivity, Graphenex meets even the most demanding thermal requirements. Application instructions: Use the adhesive side and clean surfaces beforehand Cut to size as needed and apply precisely If necessary, gently apply pressure to achieve an even distribution

THERMAL HERO Graphene Sheet 51x68x0.025mm Discover the future of thermal management with the THERMAL HERO Graphene Sheet. This ultra-thin graphene foil delivers outstanding thermal conductivity and powerful cooling performance—ideal for computers, PCs, electronics, game consoles, laptops, and graphics cards. Very high thermal conductivity Extremely thin: 0.025 mm thickness for minimal heat absorption Intense cooling performance even under high loads Long-term stability and corrosion resistance Easy application thanks to fast-adhering adhesive layer on one side Includes cleaning cloth, pressure-activated, and can be cut to size Suitable for overclocking Note: Caution: Electrically conductive! Areas of application: CPU/GPU cooling, heatsinks in PCs, laptops, game consoles, and electronics with high heat output Overclocking scenarios where maximum cooling performance is required Why Graphenex? Graphenex utilizes the extraordinary properties of graphene—extreme thermal conductivity, high flexibility, and low weight—for efficient and reliable cooling in an ultra-thin format. With thermal conductivity that is among the best available, Graphenex meets even the highest thermal requirements. Application instructions: Use the adhesive side and clean surfaces beforehand Cut to size as needed and apply precisely If necessary, apply gentle pressure to achieve even distribution

THERMAL HERO NEO 100 x 100 x 0.5 mm Thermal Hero NEO 100 x 100 x 0.5 mm – High thermal conductivity thermal pad for BASIC APPLICATIONS (CPU, GPU, laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of ease of use and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g. Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads adhere quickly and are easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated, and can be cut to size, making them flexible for different components. Wide range of thermal conductivities, suitable for various applications Shore hardness 20–40 (medium soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 3.0 mm Thermal Hero NEO 100 x 100 x 3.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate thermal requirements. Thanks to an adhesive layer on one side, the pads adhere quickly and are easy to install. Includes cleaning cloth, pressure-activated and cuttable, allowing you to flexibly adapt them to different components. Wide range of thermal conductivities, suitable for different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 2.0 mm Thermal Hero NEO 100 x 100 x 2.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for basic applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate heat requirements. The pads have an adhesive layer on one side for quick adhesion and easy installation. They come with a cleaning cloth, are pressure-activated and can be cut to size, allowing you to flexibly adapt them to different components. Wide range of thermal conductivities, suitable for various applications Shore hardness 20–40 (medium soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 1.5 mm Thermal Hero NEO 100 x 100 x 1.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent strength and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for basic applications such as CPUs, GPUs, laptops, and gaming consoles (e.g. Xbox, PS3/4/5), as well as other electronics with moderate cooling needs. The pads come with an adhesive layer on one side for quick stick-on and easy installation. Includes cleaning cloth, pressure-activatable, and cuttable to flexibly adapt to different components. Wide range of thermal conductivities available for different applications Shore hardness 20–40 (medium-soft), easily cut to size with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 100 x 100 x 1.0 mm Thermal Hero NEO 100 x 100 x 1.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an outstanding combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate thermal demands. The pads are quickly adhesive and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated, and can be cut to size, allowing you to adapt them flexibly to various components. Wide range of thermal conductivities, suitable for different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 0.5 mm Thermal Hero NEO 120 x 20 x 0.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate heat requirements. The pads feature an adhesive layer on one side for quick stick-on installation and are easy to apply. Includes cleaning cloth, pressure-activatable, and can be cut to size, making them flexible and adaptable for various components. Wide range of thermal conductivities available, suitable for different applications Shore hardness 20–40 (medium soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 1.5 mm THERMAL HERO NEO 120 x 20 x 1.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent hardness and pressure distribution Long-term stability Electrical insulation User friendliness Reliable performance THERMAL HERO NEO thermal pads provide an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads are quickly adhesive and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated, and cuttable, allowing you to flexibly adapt them to different components. Wide selection of thermal conductivities to suit different applications Shore hardness 20–40 (medium soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 1.0 mm Thermal Hero NEO 120 x 20 x 1.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of ease of use and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and game consoles (e.g. Xbox, PS3/4/5), as well as other electronics with moderate heat demands. The pads are quick to adhere and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth; pressure-activated and can be cut to size, allowing flexible adaptation to various components. Wide range of thermal conductivities to suit different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 2.0 mm Thermal Hero NEO 120 x 20 x 2.0 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an outstanding combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5), as well as other electronics with moderate thermal requirements. The pads have an adhesive layer on one side for quick attachment and easy installation. Includes cleaning cloth, pressure-activated, and can be cut to size so you can flexibly adapt them to various components. Wide range of thermal conductivities to suit different applications Shore hardness 20–40 (medium-soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 30 x 30 x 0.5 mm Thermal Hero NEO 30 x 30 x 0.5 mm – High Thermal Conductivity Thermal Pad for BASIC APPLICATIONS (CPU, GPU, Laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads offer an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops and gaming consoles (e.g. Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads are quick to adhere and easy to install thanks to an adhesive layer on one side. Includes cleaning cloth, pressure-activated and easy to cut, so you can flexibly adapt them to different components. Wide range of thermal conductivities available for different applications Shore hardness 20–40 (medium-soft), easily cut with scissors or knife Suitable for overclocking editions and demanding cooling requirements

THERMAL HERO NEO 120 x 20 x 3.0 mm Thermal Hero NEO 120 x 20 x 3.0 mm – High thermal conductivity thermal pad for BASIC APPLICATIONS (CPU, GPU, laptops, Xbox, PS3/4/5) Enhanced thermal conductivity Easy installation Consistent firmness and pressure distribution Long-term stability Electrical insulation User-friendly Reliable performance Thermal Hero NEO thermal pads provide an excellent combination of user-friendliness and performance. Ideal for BASIC applications such as CPUs, GPUs, laptops, and gaming consoles (e.g., Xbox, PS3/4/5) as well as other electronics with moderate thermal requirements. The pads feature an adhesive layer on one side for quick attachment and easy installation. Includes cleaning wipe, pressure-activated, and cuttable so you can flexibly adapt them to different components. Wide range of thermal conductivities, suitable for different applications Shore hardness 20–40 (medium-soft), easy to cut with scissors or a knife Suitable for overclocking editions and demanding cooling requirements

• USB / Lightning cable with LED light • Useful LED light – Breathable colored lights make charging more convenient to use at night. • Fast and safe charging – 2.4A current and pure copper wire provide faster and more secure charging. • Smart chip – Adjusts the appropriate current to the connected device based on intelligent identification technology. • Reinforced joint – With an extra joint reinforcement accessory for a truly anti-break design. • Charging and data transfer simultaneously – You can charge and transfer data from your phone to your PC at the same time. • Aluminum plug shell – High-quality aluminum alloy plug housing, resistant to both oxidation and corrosion. • Nylon braid – The elastic cord is braided with strong and durable nylon. High elasticity, bending resistance, and a nice touch feeling. • Convenient velcro – Thanks to the simple and practical velcro, you can say goodbye to messy cables. Makes storage easier and prevents knotting. • Connectivity: USB-A male to Lightning male • Power: 5V/2.4A (10W max) • USB version: 2.0 (up to 480Mbps)

Kodak Professional Dektol is a standard black and white photographic paper developer for RC and fiber based dark printing papers. It is a powdered concentrate that is mixed with water to make 3.8 L of stock solution. Dilute the concentrate 1:2 to prepare a safe solution.This developer has been the industry standard for decades and is suitable for processing many types of paper. When used with cool-toned papers, it produces cool to neutral tones, and with warm-toned papers, it produces warm tones. A traditional black and white photo paper developer 551 g of concentrated powder to prepare 3.8 l of basic solution It is diluted 1:2 to obtain a working solution Produces neutral or cool tones on cool-toned papers and warm tones on warm-toned papers Offers high power and consistent development speed

10 Ports charging station can simultaneously charge 10 laptops, 10 tablets, 10 high-capacity phones, or a mix of 10 devices to meet your diverse needs. Item No.: C10S-1000 • Features an exquisite metal casing, showcasing a premium and durable design. • Each port is equipped with an indicator light – red during charging and green when fully charged. • Each port supports a maximum output of 100W, utilizing proprietary IPA technology for automatic adjustment, ensuring optimal charging for devices. • Suitable for schools, offices, retail environments, government agencies, and more.

With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer. Technical specifications: Base plate material: nickel-plated electrolyte copper Material cover: acrylic glass Cover material: black anodized aluminum Connection terminal material: Acetal Dimensions: (LxWxH): 230 x 119 x 21 mm Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: Nvidia Geforce RTX 3080/3090 Scope of delivery: 1x HEATKILLER® V 1x HEATKILLER® LED Strip aRGB 1x mounting material Thermal Grizzly Kryonaut thermal paste

The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery. Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card. The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series. Technical specifications: Material: anodized aluminum Dimensions: (L x W x H): Weight: 150g Compatibility: ZOTAC Geforce RTX 3080 Trinity ZOTAC Geforce RTX 3090 Trinity Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 Zotac Trinity - Black 1x mounting material

With the HEATKILLER® V, Watercool is starting a new generation of coolers for the current Nvidia RTX 30 graphics cards. Equipped with unique highlights, the current version of the HEATKILLER® V presents what is technically feasible. With an increased number of cooling fins, the cooling performance is increased directly above the graphics processor and thus the most important area is improved. The radiator base, milled from a solid block, establishes contact with all relevant components. The trend-setting dual-layer inflow distributes the water simultaneously on two levels. This ensures an air flow that is at least 30 percent higher than that of our previous generation. The broad and symmetrical flow paths reduce dead spots (standing water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling capacity but also the flow rate of the HEATKILLER® V. Thanks to the newly designed spacers made of high-performance plastic (PEEK), the 10mm solid copper block is ideally isolated from the circuit board. In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block look like it was cast from a single source. The symmetrically designed channels underline the look of the cooler and make it a unique eye-catcher. The integrated aRGB strips are now standard in combination with the nickel-acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the lighting concept of the computer. Technical specifications: Base plate material: nickel-plated electrolyte copper Material cover: acrylic glass Cover material: annealed stainless steel Connection terminal material: Acetal Dimensions: (LxWxH): Connection: 4x G ¼ inch (DIN ISO 228-1) Weight: Pressure tested: 2 bar Compatibility: EVGA Geforce RTX 3080 XC3 EVGA Geforce RTX 3090 XC3 Scope of delivery: 1x HEATKILLER® V 1x HEATKILLER® LED Strip aRGB 1x mounting material Thermal Grizzly Kryonaut thermal paste

The HEATKILLER® V eBC backplate is a useful addition to the graphics card cooler of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and increases mechanical stability. This is made possible by the use of solid black anodized aluminum. The optics are not neglected either. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the scope of delivery. Spacers (electrically insulating) attached to the back of the backplate ensure problem-free installation on the graphics card. The enclosed mounting material is optimized for use with a water cooler from the HEATKILLER® V series. Technical specifications: Material: anodized aluminum Dimensions: (L x W x H): Weight: 150g Compatible to: NVIDIA Geforce RTX 3080 NVIDIA Geforce RTX 3090 Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 - Black 1x mounting material

The HEATKILLER® V eBC backplate is a useful addition to the graphics card coolers of the HEATKILLER® V series. Mounted on the back of the graphics card, it improves cooling performance and mechanical stability. This is made possible by the use of solid black anodized aluminum. The milled logos and indirect lighting are also eye-catchers. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the delivery. Spacers (electrically insulating) attached to the back of the backplate ensure easy installation on the graphics card. The included mounting material is optimized for use with a water cooler from the HEATKILLER® V series. Technical data: Material: anodized aluminum Dimensions: (L x W x H): Weight: 150g Compatibility: EVGA GeForce RTX 3080 FTW3 EVGA GeForce RTX 3080Ti FTW3 EVGA GeForce RTX 3090 FTW3 See also http://gpu.watercool.de for further information Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 EVGA FTW3 - Black 1x mounting material

The HEATKILLER® V eBC backplate is a useful addition to the HEATKILLER® V series graphics card coolers. Mounted on the back of the graphics card, it improves cooling performance and mechanical stability. This is made possible by the use of solid black anodized aluminum. The milled logos and indirect lighting are also discreet eye-catchers. The backplate cools relevant components on the back of the board, including the GPU and voltage converter (VRM). Pre-cut thermal pads are included in the delivery. Spacers (electrically insulating) attached to the back of the backplate ensure easy installation on the graphics card. The included mounting material is optimized for use with a HEATKILLER® V series water cooler. Technical data: Material: nickel-plated aluminum, insulated Dimensions: (L x W x H): Weight: 150g Compatibility: EVGA GeForce RTX 3080 FTW3 EVGA GeForce RTX 3090 FTW3 EVGA GeForce RTX 3080Ti FTW3 See also http://gpu.watercool.de for further information Scope of delivery: 1x HEATKILLER® V eBC - Backplate for RTX 3080/3090 EVGA FTW3 - Black 1x mounting material

EK-Pro GPU WB RTX A5000 – Nickel + Inox High-Performance Full-Cover Water Block for NVIDIA RTX™ A5000 Graphics Cards The EK-Pro GPU WB RTX A5000 – Nickel + Inox is a professional-grade, high-performance full-cover water block designed specifically for NVIDIA RTX™ A5000 GPUs. It spans the entire length of the card and cools all critical components, effectively transforming the card into a single-slot solution. Direct Cooling of Critical Components This water block directly cools the GPU core, VRAM, and VRM (voltage regulation module), channeling coolant over all major heat-generating areas to ensure optimal thermal performance. Advanced Open Split-Flow Cooling Engine Featuring EK’s renowned Open Split-Flow cooling engine, this design offers extremely low flow restriction. It performs exceptionally well even with weaker or low-speed pumps, making it perfect for multi-GPU workstations. The jet plate and fin structure have been fine-tuned for even coolant distribution with minimal pressure drop, and the block remains effective even in reverse flow scenarios. Premium Materials & Precision Engineering The base of the block is CNC-machined from nickel-plated electrolytic copper for superior thermal conductivity. The top is laser-cut from industrial-grade stainless steel, providing durability and a clean aesthetic. A built-in screw-in PCIe power connector bracket securely holds the power cable once installed. High-quality EPDM O-rings ensure tight sealing, while pre-installed brass standoffs simplify installation. Compact, Single-Slot Design The I/O bracket is integrated into the top of the block, replacing the GPU’s standard I/O shield and enhancing overall rigidity. This design allows the GPU to occupy only a single PCIe x16 slot, preserving valuable space in dense workstation or server environments. Functional & Stylish Backplate Included is a retention backplate that not only enhances structural integrity and visual appeal but also passively cools the VRM area on the back of the PCB. The water block and backplate feature cutouts to maintain full compatibility with NVIDIA NVLink. Flexible Connectivity & Mounting This version comes with a POM-machined 45°-angled terminal featuring two G1/4” ports, ideal for integration with EK-Pro QDC kits and manifolds in high-density computing environments. A side-mounted standoff is included to support GPU brace solutions for added security during chassis transport or handling. Included in the Box: EK-Pro GPU WB RTX A5000 – Nickel + Inox workstation/server-grade water block Aesthetic and functional backplate Mounting hardware with pre-installed brass standoffs Screws, nuts, and washers Thermal Interface Material (TIM) Technical Specifications: Dimensions (L x H x W): 281.2 × 152.6 × 22.3 mm Materials: Nickel-plated copper, stainless steel, POM Weight: 1.42 kg Ports: 2 × G1/4” Mounting Method: Backplate Working Pressure: 2,500 Pa Maximum Working Pressure: 30,000 Pa (with EK-Pro Pump Reservoir Manifold), otherwise 75,000 Pa Operating Temperature Range: 5 – 60 °C Compatibility: NVIDIA RTX™ A5000 Made in Slovenia – EU

HEATKILLER V PRO graphics card coolers for Nvidia's RTX 4090 Founders Edition were specially developed to cope with the high power dissipation of 450 watts and more. In order to ensure a correspondingly high increase in performance, we opted for a modular high-performance base plate. Proven technologies such as the dual-layer airflow and the symmetrical cooling design have also been incorporated. The result in the form of the HEATKILLER V PRO series is impressive both visually and in terms of performance. Key points of the HK V PRO series: High performance base plate Selected high-performance thermal pads on GDDR6X RAM Dual layer inflow Symmetrical cooling design Design-integrated connection threads in the terminal Screwless design Insulating spacers made of high-performance plastic (Peek) CNC cut thermal pads Modular high-performance base plate In order to increase the cooling performance in the area of the GPU core, we have integrated a modular high-performance base plate into the heat sink. This ensures significantly higher cooling performance than a monolithic design thanks to finely slotted fins and the resulting increase in the cooling surface. We have chosen the fin structure in such a way that, in addition to increasing the performance of the GPU core, the flow is also kept high. All distances to heat-relevant components have been kept small, which means that the heat from thermal problem areas such as GDDR6X RAM and voltage converters is ideally dissipated. The PEEK spacers made from high-performance plastic ideally insulate the cooler from the circuit board and make installation easier. The legendary Kryonaut thermal paste from Thermal Grizzly ensures the best possible heat transfer. Dual layer inflow and symmetrical cooling design The dual-layer inflow, like the symmetrical cooling design, can also be found in the PRO version of our HEATKILLER V GPU cooler. The increased inflow is particularly important for the high-performance base plate. The splitting of the water into two levels ensures better flow through the cooler. The wide and symmetrical flow paths optimize the flow and thus the general performance of the HEATKILLER V Pro cooler. Selected high-performance thermal pads for GDDR6X Our development department has invested a lot of time in finding the ideal thermal pads for the hot GDDR6X RAMs. We have found a thermal pad that significantly reduces the temperatures around the GDDR6X RAM compared to the very good standard pads. Design-integrated side connection threads Another innovation is the connection threads integrated into the side of the terminal. Together with the screwless cover and the backplate included in the package, the result is a cooler that looks like a single unit. In order to achieve the best possible appearance, the HK V PRO was designed so that no electronic components of the circuit board are visible. Backplate in package The new cooler design relies on assembly including a backplate. In our case, the black backplate ensures improved distribution of forces around the cooling block. In addition to an impressive look, this also results in better temperatures. Made in Germany Production is carried out with the greatest care on our state-of-the-art CNC machinery in Waren an der Müritz. Many work steps are carried out by hand and each product is completed according to the four-eyes principle. Made in Germany, as you would imagine. Technical data: Base plate material: electrolytic copper nickel-plated Lid material: ACETAL Material connection terminal: Acetal Dimensions: (LxWxH): 220 x 124 (incl. terminal) x 32.8mm (incl. backplate) Connection: 4x G ¼ inch (DIN ISO 228-1) Approved up to 1 bar Compatibility: NVIDIA GeForce RTX 4090 Founders Edition Scope of delivery: 1 x HEATKILLER® V PRO ACETAL 1 x HEATKILLER® V PRO backplate black 1 x Dual Slot Bracket 1 x mounting material 1 x Thermal Grizzly Kryonaut thermal paste Chip manufacturer: NVIDIA for GPU chip series:GeForce® RTX 4090 Base material: nickel-plated copper Upper material:ACETAL

EK Water Blocks EK-Quantum Vector³ Astral RTX 5090 - Plexi: Ultimate Liquid Cooling for Your ASUS ROG Astral RTX 5090 Unlock the full potential of your ASUS ROG Astral GeForce RTX™ 5090 with the EK-Quantum Vector³ Astral RTX 5090 – Plexi, the pinnacle of high-performance liquid cooling. Designed specifically for the ASUS ROG Astral GeForce RTX™ 5090 32GB GDDR7 and OC Edition, this water block delivers unmatched cooling efficiency, reliability, and stunning aesthetics, even under the most demanding workloads. Enhanced Cooling Engine for Unmatched Performance Experience superior thermal management with the Vector³ Astral RTX 5090's redesigned cooling engine. The expanded fin array and optimized coolant flow paths ensure maximum heat transfer, actively cooling the GPU core, VRAM, and power stages, while the included backplate provides passive cooling for PCB hotspots. Optimized Open Split-Flow Cooling Engine: Achieve superior flow distribution for consistent cooling and minimal restriction. Low Hydraulic Restriction: Ensure compatibility with both high- and low-flow pump systems. Ideal for Overclocking & High-Load Applications: Maintain peak performance with sustained low temperatures. Premium Materials and Precision Engineering The EK-Quantum Vector³ Astral RTX 5090 is engineered with high-quality components for durability and peak performance: Nickel-Plated Electrolytic Copper Coldplate: Maximizes thermal conductivity and longevity. CNC-Machined Cast Acrylic Top: Showcases coolant flow with a crystal-clear aesthetic. Black Anodized Aluminum Backplate: Enhances cooling surface area and structural integrity. Single O-Ring Seal Design: Reduces potential failure points for long-term reliability. New Gasket System: Prevents coolant particle buildup for optimal performance. Pre-Cut High-Performance Thermal Pads: Streamlined installation with optimized contact. Included Full-Coverage Backplate Every Vector³ Astral RTX 5090 water block includes a backplate designed to: Provide passive cooling for PCB hotspots. Offer a sleek, modern aesthetic. Simplify installation with pre-installed captive screws. EK-Matrix7 Support – For Perfect Loop Planning The EK-Quantum Vector³ Astral RTX 5090 complies with EK-Matrix7 standards, ensuring seamless integration and intuitive tube routing. Perfect integration with EK-Quantum Reflection² distribution plates. Simplified tube bending and loop planning. Seamless vertical and horizontal GPU mounting. Addressable D-RGB Compatibility Experience vibrant, customizable lighting with addressable D-RGB LEDs along the water block's edges. Compatible with major motherboard RGB sync technologies. Technical Specifications: Dimensions (L x H x W): 277 x 156 x 27 mm D-RGB LED Count: 14 D-RGB Connector: 3-pin 5V digital LED header D-RGB Cable Length: 500 mm Made in Slovenia – Europe! Elevate your gaming rig with the EK-Quantum Vector³ Astral RTX 5090 – Plexi and experience the ultimate in liquid cooling performance and aesthetic.

Measuring 6-inches tall, SP6HD desktop speaker stands bring your YU4, YU6, TUK or other 4 to 7-inch speakers into better alignment with your ears, letting you capture a wider range of frequencies. Their heavy steel structure and closed cell foam padding further improve nearfield listening by significantly reducing vibration, leaving you with cleaner, more accurate sound. Two top-plate sizes are included, each providing 30 degrees of rotation and featuring a mounting hole and 1/4? ? 20 screw to secure compatible speakers in place. For a clutter-free setup, conveniently route your cables through the center of each stand

PXN VD6 Bundle DP gaming set - VD6 base + WDS R2 steering wheel + pedals + Z9 clampThe PXN VD6 Bundle DP is a comprehensive set designed for gamers who want the experience of being behind the wheel of a real racing car. The bundle includes the PXN VD6 steering wheel base with Direct Drive, the WDS R2 steering wheel, a set of PD HM pedals, and the Z9 mounting clamp. The entire set operates on PCs running Windows 7, 8, 10, and 11, and connects via a USB cable. This set delivers a powerful driving experience, precise motion mapping, and extensive customization options for individual players.PXN VD6 BaseThe main component of the kit is the PXN VD6 base, which utilizes Direct Drive technology. This results in instant reactions and extremely realistic force and detail transmitted to the steering wheel. With a constant torque of 6 Nm, every change in direction or curb impact feels authentic. A built-in 24-bit magnetic encoder ensures precise operation, and a temperature control system prevents overheating during long gaming sessions. The low-inertia servo drive in the motor further enhances the speed and smoothness of response.WDS R2 steering wheelThe base comes equipped with the WDS R2 steering wheel, which has a diameter of 280mm. Its microfiber covering improves grip and comfort during long races. The wheel features 11 programmable buttons, 2 dials, and 11 LEDs, which can be configured for various functions, such as a tachometer or gear shift indicator. The aluminum shift paddles are robust and comfortable to use, and the quick-release system allows you to easily remove and replace the steering wheel without tools.Hall technologyThe set also includes three pedals (accelerator, brake, clutch) that operate using Hall magnetic induction technology. This makes them more precise, ensures smooth operation, and prevents wear over time. As a result, the pedals are durable and maintain consistent quality performance. Additionally, the pedal panel angle can be adjusted up to 60 degrees.PXN Sense+ algorithmThe kit utilizes the special PXN Sense+ algorithm, which analyzes data from the game and sends it directly to the steering wheel. This allows for even more accurate driving feedback. The system responds in real time to road conditions, vehicle type, and behavior, resulting in a more realistic and intuitive driving experience.PXN SimRacing applicationThe entire set is compatible with the PXN SimRacing app, allowing you to quickly and conveniently configure all the components. You can calibrate the pedals (accelerator, brake, clutch), set the button functions on the steering wheel, adjust force feedback, or change profiles for different games. Thanks to ready-made presets, installing and configuring the hardware only takes a moment.IncludedVD6 base WDS R2 steering wheel pedals Z9 clamp ManufacturerPXNModelVD6 Bundle DPConnectionwired, USBConstant torque6 NmSteering wheel diameter280 mmGearshift paddle materialAluminum alloyApplication functionalitySupportedFirmware upgradeSupportedCompatible platformPC (Windows 7-11)PC modeD inputPedal technologyHall magnetic induction linear pedals

With the Alphacool measuring kit, measuring the lengths and angles needed to bend HardTubes accurately is quick and easy. The set includes rulers in different lengths, as well as corresponding angles and a distance metre. With the included screws, all the rulers can be attached to one another and can slide along their guiding slots. This lets you measure not just one angle but several angles and straight sections at the same time. Then, the screws can all be tightened so nothing slides around. Now the whole thing can be placed on a heat-proof surface and the HardTubes can be heated and bent with an Alphacool Heatgun. All components are made of aluminum, guaranteeing high stability and a long lifespan. Scope of Delivery 1x Alphacool Eiskoffer - measuring kit