With the active USB 2.0 connecting cable AXAGON ADR-210B, 10 meters long, you will be able to connect, for example, a printer, scanner, plotter or other USB-B device to your computer. The active USB repeater cable strengthens the passing signal and allows you to connect a significantly more distant USB device than the passive cables. The range of the cable can be further extended, for example, by using AXAGON ADR-210 USB extension cable A great advantage of the ADR-210B extension is an integrated auxiliary power supply connector. In most cases, USB bus power is sufficient, but for devices with larger power consumption the USB power supply may be inadequate and auxiliary power from the mains may resolve the problem. The remarkably compact body of the repeater cable allows trouble-free use in electrical installation strips or cable systems. The use of a high-quality shielded cable ensures high communication speed and minimal undesirable interference. Input: USB 2.0 for connection to a computer USB Type A (M) male connector Output: USB 2.0 for connecting a remote USB device USB Type B (M) male connector transmission rate 480 / 12 / 1.5 Mbit/s (high / full / low speed) Power supply: Power supply of the cable and connected devices via USB bus (bus-power mode 5V - 500mA). For most connected USB devices, the power supply via USB bus is sufficient and no auxiliary power is required. The active part of the cable includes a connector ( 3.5 x 1.3 mm outer x internal diameter) for additional external power supply of 5V/ 1-2 A. The power cable USB A-M / 3.5 mm jack, 1.2 m long is included. The cable allows powering from a standard mobile phone charger with USB-A output 5V / min. 1A, e.g. AXAGON ACU-DS16. Other features: Fully compatible with USB 2.0 and backward compatible with USB 1.1. Full Plug and Play and Hot Plug support. Two LEDs indicating power and USB device connection. Behind the active USB cable, a common passive USB cable can also be used. Dimensions of active part with are 95 x 22 x 13 mm, cable length 10 m. Weight 350 g. Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.6.x kernel and higher. Note: Drivers are included with supported operating systems and will be installed automatically. No other drivers need to be installed and are not even available. Package contains: USB 2.0 A-M > B-M active repeater 10 m long, USB-A / 3.5 mm power cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.
Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM10AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 1 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Premium connection USB-C USB-A Data and Charging AXAGON BUCM-AM15AB HQ USB 2.0 cable with USB-C male and USB-A male connectors. The cable is designed to data synchronization and charging phones, tablets and other mobile devices. It supports up to 480 Mb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male USB-A (M) male Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. USB 2.0 compatible with USB 1.1. Supports 480 / 12 / 1.5 Mb/s (High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0/3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks, cameras and other mobile devices with USB-C connector. Other data: cable length 1.5 m, cable outer diameter 4 mm. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.
Akuga tolmuimeja VC 6 Cordless ourFamily. Puhastamine võib tõesti nii lihtne olla: VC 6 Cordless ourFamily tolmuimejaga saab tolmuimemisest tõeline rõõm. Paljude nutikate funktsioonide hulka kuuluvad ühe klõpsuga tolmumahuti tühjendamine, võimendusfunktsioon, ergonoomiline disain raskesti ligipääsetavates kohtades puhastamiseks ja aktiivse põrandaotsiku LED-tuled, mis muudavad tolmu paremini nähtavaks ja garanteerivad usaldusväärse mustuse äravõtmise. Muude eeliste hulka kuuluvad vaikne müratase ja hõlpsasti loetav aku oleku kuva, mis näitab aku olekut ja asjakohaseid teateid igal ajal. Samuti on mugav Power Lock funktsioon, mis eemaldab vajaduse toitenuppu pidevalt all hoida. Tänu sisseehitatud laadimisfunktsiooniga seinaklambrile ei saaks tolmuimeja hoiustamine ja laadimine olla lihtsam. Võimas BLDC mootor (250 W) koos 25,2 V akupingega muudab koristamise oluliselt lihtsamaks. Kaheastmeline võimsuse reguleerimine. Piisavalt tööaega, et puhastada ka suuremad majapidamised. Valikuline turborežiim. Seinakinnituse abil saab seadet kiiresti ja hõlpsasti hoiustada. Mugav laadida vaid tolmuimejat seinale kinnitades. Intuitiivne ekraan tagasiside ja laadimisoleku jaoks Võimsust saab vastavalt teostatavale puhastustööle kiirelt ja hõlpsasti reguleerida. Valikuline turborežiim. Toitenupu lukustus kasutamise hõlbustamiseks. Peenhäälestatud tehnoloogia Võimas 25,2 V aku, mis sobib liikuva põrandaotsikuga ideaalselt. Optimeeritud tööaeg tavarežiimis 50 minutit. 250 W mootor, liikuv põrandaotsik, toitenupu lukustus ja kolmeetapiline tolmukotita filtrisüsteem. Praktilise disainiga filtrisüsteem 3-etapiline filtrisüsteem tsüklonilise, õhu sissevõtu ja HEPA hügieenifiltriga. HEPA hügieenifilter (EN 1822:1998) eriti puhta väljuva õhu jaoks. Tolmukonteineri lihtne tühjendamine vaid ühe klõpsuga. Liikuv põrandaotsik Motoriseeritud rullik korjab mustuse optimaalselt üles. Äärmiselt hea manööverdusvõime tagab hea liikuvuse ka mööbli all. Tagab pindade usaldusväärse puhastamise.
Wireless ME - Great audio every time! Record professional sound for your videos with the Wireless METM microphone system. Simply clip it onto your talent to be recording crystal-clear wireless audio in seconds. Works with cameras, computers and smartphones, and is compatible with all social media apps, including Instagram and TikTok. Also compatible with free RØDE video and audio apps, including the RØDE Capture iOS camera app for dual-camera video recording. Features microphones built into both the transmitters and receiver for recording everything from two-way interviews to reaction videos, with GainAssist technology ensuring your audio is perfect every time. • Simple to use • Dual-channel system with two transmitters and one receiver • GainAssist technology for crystal-clear audio • Built-in microphones – no additional accessories required • Works with cameras, computers and smartphones (iOS and Android) • Compatible with free RØDE video and audio apps Transmission range: 100m (line of sight) What´s in the box 2 x Transmitters 1 x Receiver 1 x SC21 USB-C to Lightning Cable 2 x SC22 USB-C to USB-C Cable 1 x SC2 3.5mm TRS to TRS cable 1 x SC7 3.5mm TRRS to TRS cable 3 x Fur Windshields 1 x Carry Pouch
All-In-One-Wasserkühlung in Schwarz, 240-mm-Radiator, zwei 120-mm-ARGB-Lüfter, 3 austauschbare Pumpendeckel, Unendlichkeitsspiegel-Effekt, schönes Design und leiser Betrieb, angewinkelte Fittinge frei drehbar, kompatibel zu Sockeln von AMD und Intel (inkl. LGA 1700)
Go Beyond the sounds in gaming, music, and movies Introducing the Next Level Racing HF8- Haptic Feedback Gaming Pad. Feel the immersive haptic experience with the eight strategically placed vibration zones that are powerful and localized for precision. The Next Level Racing HF8 is optimized for different simulation games* for a unique in-game experience. The HF8 suits all gaming chair, racing/flight seat styles, and bodies comfortably for the best user experience. The HF8 includes plug-and-play PC software to provide you a multi-channel experience without the need of additional sound cards or amplifiers. *Localization and intensity of each motor can only be adjusted through PC use and HFS software. Console players do not require the HFS software as the eight motors will work collectively through the audio output. NEXT LEVEL HAPTIC EXPERIENCE Feel the sound through your body like never before! The Next Level Racing HF8 eight localized motors have been designed and positioned to suit all genres of simulation. Suiting a wide range of users, the HF8 Gaming Pads tailored design allows a seamless placement on your sim racing seat, flight seat, or gaming chair for eight unique feedback points to be felt comfortably throughout your body. Strap in for a tight fit with the added easy adjustable straps for a suited fit with your gaming chair or racing /flight seat. Designed to heighten your experience for Racing, Flight, and FPS Gaming, you can now feel every road effect, turbulence, and explosion within the game for an even more immersive gaming experience than ever before. Take your esports training and competition to the next level by feeling every action in the moment. If you are already using haptic hardware like ButtKicker or Motion Platforms the HF8 compliments these by adding extra customizations to your experience. COMPATIBLE WITH PC, SUPPORTS CONSOLE A seamless connection for a unique gaming experience. With a direct connection through USB for PC and a 3.5mm audio jack connection to console/audio devices, the HF8 ensures fast, low latency feedback through the eight localized haptic motors. For console users, the haptic feedback is felt through all eight haptic vibration zones simultaneously. In-game telemetry data* for PC games and sound output for console games, provide an immersive experience for racing, First Person Shooter (FPS), and flight. *PlayStation does not have a dual audio output option, making the use of Bluetooth headsets on PlayStation not compatible when using the HF8 Gaming Pad. The HF8 Gaming Pad must be connected to the PlayStation controller via the 3.5mm audio jack. PLUG-AND-PLAY SOFTWARE FOR PC No hassle, just download and play the included Next Level Racing Haptic Feedback Software. Designed and developed specifically for the HF8, you can interact with a growing list of racing and flight titles. The Next Level Racing HFS included PC software makes it seamless for users to enhance the experience with the HF8 Gaming Pad controlling each motor independently. As one of many variations, you can have 4 motors controlling the effects of tires to feel rumble strips independently or have all 8 motors giving vibration for gear changes. You can interact with ready-to-use haptic profiles or create your own for each gaming title, and even share your profile with the gaming community. List of compatible games. Next Level Racing will be continuously updating the HFS software with new gaming titles as they are released. If the title you are looking for is not listed in the HFS software, please contact us at hfs.support@nextlevelracing.com to share your feedback. HF8 Gaming Pad users can also utilize the Simhub software to access a variety of gaming titles and effects to maximize the experience. ** Please note that console players do not require the HFS software as the eight motors will work collectively through the audio output in games, music, or movies. CONTROL YOUR HAPTIC IMMERSION Feel it your way, for PC users. The HF8 can be adjusted based on the desired haptic experience. The HFS software uniquely controls the intensity of each haptic vibration motor within the software to ensure an unbroken immersive experience. The HF8 Gaming Pad allows you to feel and fine-tune your braking, acceleration, rev limiter, speed, engine rpm, ground effect, and suspension in racing games*. While in flight you can control your haptic experience with effects such as flaps, G-force, speed air brakes, ground bumps, damages, stalls, and APU/JFS Running. Each profile and effect intensity can be controlled based on your preference to feel what is immersive to you. SYNC IN FOR MUSIC AND MOVIES Feel the action, feel the beat! Connect to your audio device through the HF8 3.5mm audio jack and adjust the intensity of your haptic experience through the HF8 controller. Feel the ultimate depth of haptic immersion of your favourite action movie by feeling every explosion, punch, and BANG! Translate the low frequency of the audio output into a haptic experience that is felt through all eight haptic vibration motors simultaneously.
4MP Smart Dual Light Fixed-focal Eyeball WizSense Network Camera > 4-MP 1/2.9" CMOS image sensor, low luminance, and high definition image. > Outputs max. 4 MP (2688 × 1520)@20 fps, and supports 2560 × 1440 @25/30 fps. > H.265 codec, high compression rate, ultra-low bit rate. > Built-in warm light/IR LED, the max. illumination distance is 30 m and the max. warm light distance is 30 m. > ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments. > Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes. > Intelligent monitoring: Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human). > Supports max. 256 G Micro SD card; built in MIC. > 12 VDC/PoE power supply, easy for installation. > IP67 protection. > SMD Plus.
Smart Folio kaitseümbris iPad Air 11-tollisele (M2) mudelile on funktsionaalne ja stiilne lisavarustus. Kohanda ümbrise kallet lugemiseks, videote vaatamiseks, kirjutamiseks või FaceTime kõnedeks. Avades lülitub iPad automaatselt sisse ja sulgedes läheb magama, säästes akut. Smart Folio kaitseb iPad Pro esikülge ja tagakülge ilma liigse lisaraskuseta.
Essential to Lexmark print system performance, Unison Toner's unique formulation consistently delivers outstanding image quality, ensures long-life print system reliability and promotes superior sustainability - all in an innovative shake-free print system.
LEXMARK CS/X73x 28K must reflow programmikassett on suure võimsusega laserprinterikassett, mis on mõeldud suure printimiskvaliteediga printimiseks suure mahuga trükikeskkondades. Spetsiaalselt Lexmark CS- ja X-seeria printeritele mõeldud kassett pakub silmapaistvat 28 000 lehekülje tootlikkust, mis teeb sellest kulutõhusa valiku ettevõtetele, kes vajavad printimistööde puhul tõhusust ja vastupidavust. Must tooner tagab rikkalikud, sügavad mustad toonid ja elava teksti, nii et iga trükitud dokument on professionaalsete standardite kohane. See kassett on osa Lexmarki tagasivõtuprogrammist, mis on jätkusuutlik algatus, mis võimaldab tarbijatel säästa raha, aidates samal ajal kasutatud kassettide taaskasutamise kaudu keskkonda kaitsta. Lihtsalt paigaldatav disain tagab minimaalse seisakuaja, nii et saate säilitada tootlikkuse muretult. Olenemata sellest, kas trükite aruandeid, suure mahuga dokumente või turundusmaterjale, on LEXMARK CS/X73x must 28K tagastusprogrammi kassett loodud nii, et see tagab iga kord ühtlase jõudluse ja kvaliteetsed tulemused.
A powerful office docking station supporting super-fast USB Gen 2 ports with fast charging. The docking station supports output to two external monitors in high resolution up to 4K. The docking station can be used with virtually all notebooks as it supports connection to all popular ports: USB 3.0, USB-C and Thunderbolt 3/4" while supporting all popular operating systems today. Plenty of USB ports (two USB-C support Gen 2 with speeds of up to 10 Gbps), a reliable and fast connection to the corporate network thanks to the integrated LAN port and the possibility of mounting behind a monitor make this docking station the ideal companion for real professionals. Of course, it supports charging a laptop or tablet with a power of up to 100 W. Professional, universal docking station, compatible with laptops and tablets equipped with a USB-C, USB-A and Thunderbolt connector. 2x DisplayPort and 2x HDMI supporting up to two 4K/60Hz displays (also applies to Apple M1/M2 platform) or a single 5K/60Hz display. 7 USB ports, including 2x USB-C Gen 2 (1x supporting 20W PD charging and one supporting BC 1.2 fast charging) and 5x USB-A 3.2 (2x Gen 2 and 3x Gen 1), making it easy to connect multiple USB devices and peripheral devices for super-fast data transfer. Provides up to 100W of power for compatible USB-C and Thunderbolt laptops and tablets. The host device must support USB-C Power Delivery. GLAN Ethernet supports network speeds of 10/100/1000 Mbps, ensuring a solid and fast Internet connection. Combined high-quality 3.5mm 32bit/192kHz audio input and output for easy connection to a headset or speakers. An available VESA mount helps keep your desk tidy and free from cables, while a K-lock slot provides additional security.
The compact USB wallcharger AXAGON ACU-PD30W Sil for fast charging of mobile devices. With s maximum power of 30W, the charger charges phones, tablets and other mobile devices at the highest possible speed. The adapter offers a reversible USB-C connector. Compact size and high performance is given by the new Sil technology used. Super silicon uses advanced silicon-based materials. The charger can thus achieve smaller dimensions and at the same time safe, stable and fast charging. The efficiency is thus identical to GaN technology while maintaining a favorable price. The charger is equipped with Power Delivery 3.0 / Quick Charge 4+ USB Type-C, enabling fast charging of smartphones and tablets with a power of up to 30W. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and also offers 27W PD charging for iPhone 13 Pro, 14 Pro, 15 Pro and their Pro Max models. In addition, it supports 25W SFC charging for Samsung Galaxy S20 - S24, Note and Z Fold series and also offers 30W SFC charging for Samsung Galaxy S20 - S24 Ultra, Tab S7+ - S9+, Tab S8 - S9 Ultra. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and size. Compared to classic charging adapters with same parameters, the size of the charger is a third smaller. The combination of small dimensions, achieved with Sil technology and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 1A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Output: USB-C port PD (tablets, phones) max. 30W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A, PPS: 3-11V/3A, 3-16V/2A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC, AFC, FCP, SMART, Apple PD, Apple 2.4A Maximum power: maximum power 30W maximum current 3A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) a Apple 2.4A (iPad). FCP - quick charging using Huawei Fast Charge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. SFC - quick charging using the Samsung Super Fast Charging protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocols. PPS - quick charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones, tablets and ultrabooks: SFC - quick charging (up to 25W) of Samsung Galaxy S20, S21, S22, S23, S24 series, Note 10, 20 series, Z Fold 2, 3, 4 series. SFC - quick charging (up to 30W) of Samsung Galaxy S20, S21, S22, S23, S24 Ultra, Tab S7+, Tab S8+, Tab S9+, Tab S8 Ultra, Tab S9 Ultra. PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 14, 14 Plus, 15, 15 Plus phone. PD - quick charging (up to 27W) Apple iPhone 13 Pro, 13 Pro Max, 14 Pro, 14 Pro Max, 15 Pro, 15 Pro Max phone. PD - quick charging (up to 30W) Apple iPad mini, iPad Air, iPad Pro, MacBook Air and other ultrabooks. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 56 g, material: non-flammable plastic. Package contains: white wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
The compact wallcharger AXAGON ACU-PD20 enables fast charging of mobile devices. With 20W of maximum power, the charger charges phones, tablets and other mobile devices at the highest possible speed. The adapter offers a reversible USB-C connector. The charger is equipped with Power Delivery 3.0 / Quick Charge 4+ USB Type-C, enabling fast charging of smartphones and tablets with a power of up to 20W. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and their Pro and Pro Max models. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and compact size. The combination of small dimensions and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 1A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Output: USB-C port PD (tablets, phones) max. 20W: 5V/3A, 9V/2.22A, 12V/1.67A, PPS: 3-5V/3A, 3-11V/1A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, AFC, FCP, SMART, Apple PD, Apple 2.4A Maximum power: maximum power 20W maximum current 3A Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging. SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) a Apple 2.4A (iPad). FCP - quick charging using Huawei Fast Charge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocol. PPS - quick charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones and tablets: PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 13 Pro, 13 Pro Max, 14, 14 Plus, 14 Pro, 14 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max phones. PD - quick charging (up to 20W) iPad mini, iPad Air, iPad Pro and other tablets. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP: Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 52 g, material: non-flammable plastic. Package contains: black wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.
